Esposti Ongaro, Tomaso
Preferred name
Esposti Ongaro, Tomaso
Email
tomaso.espostiongaro@ingv.it
Staff
staff
ORCID
Researcher ID
E-4036-2015
39 results
Filters
Settings
The search returned 39 results
Now showing 1 - 10 of 39
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Enhancing the uncertainty quantification of pyroclastic density current dynamics in the Campi Flegrei caldera.
In this study we present a new effort to improve the uncertainty quantification (UQ) of pyroclastic density current dynamics in the Campi Flegrei caldera, thanks to the implementation of a new 2D depth-averaged granular flow model in the Monte Carlo simulation of keycontrolling variables. Campi Flegrei caldera is an active and densely populated volcanic area in the urban neighborhood of Napoli, characterized by the presence of many dispersed cones and craters, and by a caldera wall more than one hundred meters high, towards East. Basic mapping of pyroclastic density currents (PDC) hazard at Campi Flegrei has been already reported in previous studies: some related to field reconstruction and numerical modeling of specific past eruptions or individual scenarios, while others endeavored to produce specific or integrated PDC hazard maps in which the variability of important parameters of the volcanic system was explicitly accounted for. In particular, [4, 2] obtained quantitative estimates of probabilistic PDC hazard, based on the implementation of a simplified kinematic invasion model able to represent main topographic effects. This model, called box model, was extensively run thousands of times in the Monte Carlo simulation varying vent location, eruptive scale, and time frequency of the future activity. In this study we build our effort upon the previous research started in [7, 5], and utilize the physical modeling approach of [6], with the effcient numerical solution of depth-averaged equations for the flow mass and momentum, considering the effects of basal and internal, velocity dependent, friction forces. The model describes the gas-particle mixture as a homogeneous flow, assuming a mechanism of particle deposition consistent with that previously implemented in the box model. UQ is performed by assuming three different components in the input space: (i) rheology parameters, (ii)volume scale, (iii) source location. Our statistical analysis focuses on the first two components, considering a relatively small number of source locations or an uncertain source location inside a subregion of the caldera. This is a first step before the exploration of the full spatial variability of the source location. The statistical inversion of box model equations, varying the vent location (x; y) and the value of inundated area A, can provide us with initial probability estimates for the volume scale of the PDC flow, either in terms of runout distance or volume extent of the multiphase mixture. Our depth averaged model relies on these estimates for setting up the volume scale of past flows. The calibration of rheology parameters is performed according to that. Thus, the rheology and volume components of the input space are conjointly explored by means of Latin Hypercube sampling, attempting a hierarchical conditioning on feasible inputs and plausible outputs [3]. [1] A. Bevilacqua, F. Flandoli, A. Neri, R. Isaia, S. Vitale, “Temporal models for the episodic volcanism of Campi Flegrei caldera (Italy) with uncertainty quantification," Journal of Geophysical Research: Solid Earth 121, 11 (2016). [2] A. Bevilacqua, A. Neri, M. Bisson, T. Esposti Ongaro, F. Flandoli, R. Isaia, M. Rosi, S. Vitale, “The e ects of vent location, event scale, and time forecasts on pyroclastic density current hazard maps at Campi Flegrei caldera (Italy)," Frontiers in Earth Science 5, 72 (2017). [3] A. Bevilacqua, A.K. Patra, M.I. Bursik, E.B. Pitman, J.L. Macías, R. Saucedo, D. Hyman, “Probabilistic forecasting of plausible debris flows from Nevado de Colima (Mexico) using data from the Atenquique debris flow, 1955," Natural Hazards Earth System Science 19, 791-820 (2019). [4] A. Neri, A. Bevilacqua, T. Esposti Ongaro, R. Isaia, W.P. Aspinall, M. Bisson, F. Flandoli et al., “Quantifying volcanic hazard at Campi Flegrei caldera (Italy) with uncertainty assessment: 2. Pyroclastic density current invasion maps," Journal of Geophysical Research: Solid Earth 120, 2330-2349 (2015). [5] T. Esposti Ongaro, S. Orsucci and F. Cornolti, “A fast, calibrated model for pyroclastic density currents kinematics and hazard," Journal of Volcanology and Geothermal Research 327, 257 - 272 (2016). [6] M. de’ Michieli Vitturi, T. Esposti Ongaro, G. Lari, and A. Aravena, “IMEXSfloW2D 1.0: a depth-averaged numerical flow model for pyroclastic avalanches," Geoscientific Model Development, 12, 581-595 (2019). [7] M. Todesco, A. Neri, T. Esposti Ongaro, P. Papale, and M. Rosi, “Pyroclastic flow dynamics and hazard in a caldera setting: Application to Phlegrean Fields (Italy)," Geochemistry Geophysics Geosystems, 7, Q11003 (2006).132 76 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The footprint of column collapse regimes on pyroclastic flow temperatures and plume heights
The gravitational collapse of eruption columns generates ground-hugging pyroclastic density currents (PDCs) with highly variable temperatures, high enough to be a threat for communities surrounding volcanoes. The reasons for such great temperature variability are debated in terms of eruptive versus transport and emplacement processes. Here, using a three-dimensional multiphase model, we show that the initial temperature of PDCs linearly correlates to the percentage of collapsing mass, with a maximum temperature decrease of 45% in the case of low percentages of collapse (10%), owing to an efficient entrainment of air into the jet structure. Analyses also demonstrate that column collapse limits the dispersal capabilities of volcanic plumes, reducing their maximum height by up to 45%. Our findings provide quantitative insights into the mechanism of turbulent mixing, and suggest that temperatures of PDC deposits may serve as a marker for determining column collapse conditions, which are of primarily importance in hazard studies.320 140 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , IMEX_SfloW2D 1.0: a depth-averaged numerical flow model for pyroclastic avalanches
Pyroclastic avalanches are a type of granular flow generated at active volcanoes by different mechanisms, including the collapse of steep pyroclastic deposits (e.g., scoria and ash cones), fountaining during moderately explosive eruptions, and crumbling and gravitational collapse of lava domes. They represent end-members of gravity-driven pyroclastic flows characterized by relatively small volumes (less than about 1 Mm3) and relatively thin (1–10 m) layers at high particle concentration (10–50 vol %), manifesting strong topographic control. The simulation of their dynamics and mapping of their hazards pose several different problems to researchers and practitioners, mostly due to the complex and still poorly understood rheology of the polydisperse granular mixture and to the interaction with the complex natural three-dimensional topography, which often causes rapid rheological changes. In this paper, we present IMEX_SfloW2D, a depth-averaged flow model describing the granular mixture as a single-phase granular fluid. The model is formulated in absolute Cartesian coordinates (whereby the fluid flow equations are integrated along the direction of gravity) and can be solved over a topography described by a digital elevation model. The numerical discretization and solution algorithms are formulated to allow for a robust description of wet–dry conditions (thus allowing us to accurately track the front propagation) and an implicit solution to the nonlinear friction terms. Owing to these features, the model is able to reproduce steady solutions, such as the triggering and stopping phases of the flow, without the need for empirical conditions. Benchmark cases are discussed to verify the numerical code implementation and to demonstrate the main features of the new model. A preliminary application to the simulation of the 11 February pyroclastic avalanche at the Etna volcano (Italy) is finally presented. In the present formulation, a simple semi-empirical friction model (Voellmy–Salm rheology) is implemented. However, the modular structure of the code facilitates the implementation of more specific and calibrated rheological models for pyroclastic avalanches.545 228 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , 79 285 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The historical record of pyroclastic density currents at Stromboli and perspective for future hazard assessment
The formation of pyroclastic density currents (PDC) at Stromboli has been described several times. PDCs are associated with paroxysms, lava emissions and commonly confined into the Sciara del Fuoco (SdF). At least during 1906, 1930 and 1944 paroxysms PDCs were produced on the flanks of Stromboli, out of the SdF. PDCs flowed in valleys cut on the volcano flanks and reached the sea producing vast deltas. In 1930 two flows reached the Stromboli village causing victims. During the 3 July paroxysm, pyroclastic material was emplaced on steep slopes right above the village of Ginostra and small avalanches of incandescent rocks were produced. In light of recent events, PDCs were produced also inside the SdF, reached the sea and continued to flow over the water for several hundred meters. PDCs potentially represent the most dangerous manifestation of volcanic activity at Stromboli and need a proper hazard assessment.74 62 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Dynamics of shallow hydrothermal eruptions: new insights from Vulcano’s Breccia di Commenda eruption
Understanding the dynamics and effects of hydrothermal eruptions is crucial to the hazard assessment in both volcanic and geothermal areas. Eruptions from hydrothermal centres may occur associated with magmatic phases, but also as isolated events without magmatic input, with the most recent examples being those of Te Maari (Tongariro, New Zealand) in 2012 and Ontake (Japan) in 2014. The most recent caldera of the Island of Vulcano (southern Italy) hosts in its centre the La Fossa cone, active since 5.5 ka and now characterised by continuous fumarolic degassing. In historical times, La Fossa cone has experienced several hydrothermal eruptions, with the most violent event being the Breccia di Commenda eruption that occurred during the thirteenth century ad. Based on analysis of 170 stratigraphic logs, we show that the Breccia di Commenda eruption occurred in three main phases. After an opening, low-intensity ash emission phase (phase 1), the eruption energy climaxed during phase 2, when a series of violent explosions produced an asymmetric shower of ballistic blocks and the contemporaneous emplacement of highly dispersed, lithic-rich, blast-like pyroclastic density currents (PDCs). The tephra units emplaced during phase 2, ranging in volume from 0.2 to 2.7 × 10^5 m3, were covered in turn by thin ash fall deposits (phase 3). The dynamics of the most violent and intense stage of the eruption (phase 2) was investigated by numerical simulations. A three-dimensional numerical model was applied, describing the eruptive mixture as a Eulerian–Eulerian, two-phase, non-equilibrium gas-particle fluid (plus a one-way coupled Lagrangian ballistic block fraction). At the initial simulation time, a mass of about 10^9 kg, with initial overpressure above 10 MPa, and a temperature of 250 °C, was suddenly ejected from a 200-m-long, eastward inclined, NNE–SSW trending fissure. The mass release formed blast-like PDCs on both sides of the fissure and launched ballistic blocks eastwards. Field investigations and numerical simulations confirm that hydrothermal explosions at La Fossa cone include intense ballistic fallout of blocks, emission of PDCs potentially travelling beyond the La Fossa caldera and significant ash fallout. The hazard associated with both ballistic impact and PDC ingress, as associated with hydrothermal eruption, is significantly larger with respect to that associated with Vulcanian-type events of La Fossa.390 3 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , From magma ascent to ash generation: investigating volcanic conduit processes by integrating experiments, numerical modeling, and observations
Processes occurring in volcanic conduits, the pathways through which magma travels from its storage region to the surface, have a fundamental control on the nature of eruptions and associated phenomena. It has been well established that magma flows, crystallizes, degasses, and fragments in conduits, that fluids migrate in and out of conduits, and that seismic and acoustic waves are generated and travel within conduits. A better understanding of volcanic conduits and related processes is of paramount importance for improving eruption forecasting, volcanic hazard assessment and risk mitigation. However, despite escalating advances in the characterization of individual conduit processes, our understanding of their mutual interactions and the consequent control on volcanic activity is still limited. With the purpose of addressing this topic, a multidisciplinary workshop led by a group of international scientists was hosted from 25 to 27 October 2014 by the Pisa branch of the Istituto Nazionale di Geofisica e Vulcanologia under the sponsorship of the MeMoVolc Research Networking Programme of the European Science Foundation. The workshop brought together the experimental, theoretical, and observational communities devoted to volcanological research. After 3 days of oral and poster presentations, breakout sessions, and plenary discussions, the participants identified three main outstanding issues common to experimental, analytical, numerical, and observational volcanology: unsteadiness (or transience), disequilibrium, and uncertainty. A key outcome of the workshop was to identify the specific knowledge areas in which exchange of information among the subdisciplines would lead to efficient progress in addressing these three main outstanding issues. It was clear that multidisciplinary collaboration of this sort is essential for progressing the state of the art in understanding of conduit magma dynamics and eruption behavior. This holistic approach has the ultimate aim to deliver fundamental improvements in understanding the underlying processes generating and controlling volcanic activity.1096 123 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Assessing future vent opening locations at the Somma-Vesuvio volcanic complex: 2. Probability maps of the caldera for a future Plinian/sub-Plinian event with uncertainty quantification
(2017-06-17); ; ; ; In this study, we combine reconstructions of volcanological data sets and inputs from a structured expert judgment to produce a first long-term probability map for vent opening location for the next Plinian or sub-Plinian eruption of Somma-Vesuvio. In the past, the volcano has exhibited significant spatial variability in vent location; this can exert a significant control on where hazards materialize (particularly of pyroclastic density currents). The new vent opening probability mapping has been performed through (i) development of spatial probability density maps with Gaussian kernel functions for different data sets and (ii) weighted linear combination of these spatial density maps. The epistemic uncertainties affecting these data sets were quantified explicitly with expert judgments and implemented following a doubly stochastic approach. Various elicitation pooling metrics and subgroupings of experts and target questions were tested to evaluate the robustness of outcomes. Our findings indicate that (a) Somma-Vesuvio vent opening probabilities are distributed inside the whole caldera, with a peak corresponding to the area of the present crater, but with more than 50% probability that the next vent could open elsewhere within the caldera; (b) there is a mean probability of about 30% that the next vent will open west of the present edifice; (c) there is a mean probability of about 9.5% that the next medium-large eruption will enlarge the present Somma-Vesuvio caldera, and (d) there is a nonnegligible probability (mean value of 6–10%) that the next Plinian or sub-Plinian eruption will have its initial vent opening outside the present Somma-Vesuvio caldera.1300 126 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , From field data to numerical models: application of the Box-Model to infer the dynamics of PDC generated during the AD 79 eruption of Somma-Vesuvio
The purpose of this work is to present a validation procedure for a physical and numerical model of Pyroclastic Density Currents (PDC) using feedbacks from well-known deposits emplaced by specific single eruptive units.The study is specifically focused on the PDCs generated during the overall famous AD 79 eruption of the Somma- Vesuvio volcano. To this purpose, values of the maximum runout, volumes and Total Grain Size Distributions have been estimated for two eruptive units (i.e. EU3pf and EU4; Cioni et al. 2000) of the AD 79 eruption. These units have been used to define the input volcanological parameters for testing the Box-Model of Dade and Huppert (1995), when reproducing one specific end-member of the complex spectrum of PDCs, that is the more dilute, turbulent part of the PDCs reconstructed in the Somma-Vesuvio record (stratified flows with concentration of solid particles in volume up to about 5%). The Box-Model is a kinematic approach, which calculates the flow density and velocity along time and the kinetic energy of the flow front. This can be compared with the potential energy needed to overcome topographic obstacles to estimate flow invasion across complex topographies. Validation of the model has been performed with respect to: i) the degree of overlapping between inundation areas given by the model and by field data; ii) the thickness of the deposit versus the thickness of the model output with distance; iii) the mass fractions of the different grain size classes with distance in the real deposit versus the model output. Several simulations have been performed considering i) polydisperse (with 10 grain size classes) and monodisperse (with the Md' values) systems; ii) a direct version (where the initial volume is released and the invasion area is computed) and an inverse version (where the initial collapsing volume is a function of an inundation area defined by the user); iii) axisymmetrical and asymmetrical collapses. Results allow to obtain first order estimates of the main variables characterizing the flow source and emplacement; among the two eruptive units chosen for model validation, the EU4 provided better results with only a minor empirical calibration of few parameters (i.e. settling velocity and initial volume fraction of solid particles), indicating that the Box Model can be suited to represent the kinematics of large (volume > 10^8 m^3, runout > 15 km) PDC at Somma-Vesuvio.56 58 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Zonazione della pericolosità da flussi piroclastici ai CF: l'effetto della posizione della bocca, della scala eruttiva e dell'orizzonte temporale della previsione
Lo studio Bevilacqua et al. (2017) ha ottenuto diversi risultati sulle stime di pericolosità da PDC: 1) la statistica della scala eruttiva negli ultimi 15 ka indica che in passato sia stata significativamente maggiore nel settore orientale della caldera (a est di E14°12'). Questo ha effetti significativi sulla pericolosità da PDC, con una riduzione ad ovest, ed un aumento ad est. Mappe basate su scenari fissi sono pure disponibili, ma rappresentano una semplificazione rispetto alle stime di pericolosità complete. Gli scenari a scale eruttive fissate possono infatti corrispondere ad eventi poco probabili. Il 95% della scala eruttiva è pari a ~39±11 km2 nel settore occidentale e ~169±18 km2 in quello orientale. Grazie allo studio Bevilacqua et al. (2016) sono disponibili delle stime temporali, basate sulla statistica del record passato. Le stime tengono conto degli effetti di clustering nei dati, che sono significativi. La frequenza eruttiva è diversa fra i due settori, con una maggiore frequenza nel settore orientale. L'interpretazione di Monte Nuovo con inizio di una epoca eruttiva ha effetti significativi sulla pericolosità da PDC a 10 anni, con una riduzione sostanziale nel caso contrario. Stime di pericolosità a 50 anni sono pure disponibili, anche considerando l'effetto di eruzioni multiple. Mappe che assumono il punto di origine del PDC in una specifica porzione della caldera sono disponibili. Esse costituiscono scenari con probabilità anche significativa. Le mappe localizzate permettono di testare rapidamente vincoli sulla posizione ottenibili coi dati di monitoraggio. Le stime sulla posizione della bocca eruttiva, i.e. il punto di origine dei PDC dovrebbero essere migliorate, includendo gli effetti di precursori sismici e deformazione. In particolare: 1) sono disponibili nuovi dati sulla storia della deformazione negli ultimi 15 ka che possono permettere di indagare maggiormente il legame fra deformazione e posizione delle bocche passate (i.e. Bevilacqua et al. 2017). 2) è in studio un meccanismo di aggiornamento short-term delle mappe in seguito all'osservazione di nuovi dati sismici, che combini: - un modello fisico sulla distanza fra epicentro e potenziale nuova bocca eruttiva, - la stima della probabilità che uno sciame sia un precursore eruttivo - la sensibilità delle stime rispetto alla memoria del sistema dei dati osservati in precedenza. 3) La portabilità ed il confronto delle mappe probabilistiche e dell'incertezza ad esse associata potrebbe essere aumentata, formalizzandone una rappresentazione comune tramite campi Gaussiani. Questo richiede uno studio ulteriore delle proprietà di correlazione spaziale fra punti diversi della caldera, e può facilitare la formulazione di un meccanismo robusto di aggiornamento short-term.67 94
