Skip to main content
The search returned 76 results
Now showing 1 - 10 of 76
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Debris Flows and Ground Deformation at Colli Albani Hills Volcano (Italy)

    (Basel: Birkhäuser 1964-, 2025-04-09) ; ; ; ;
    Colli Albani Hills, a volcanic complex located 20 km SE of Roma (Italy), represents a long-dormant caldera system and its last eruption is dated back * 20 ky. It is subjected to seismic swarms, gaseous emissions and ground deformations. The whole volcanic complex is affected by landslides of different typologies and in the past the most frequent were debris flows. In this study, for the first time, the debris flows susceptibility of the complex is mapped through a heuristic approach that combines parameters recognized in literature as the main predisposing factors to slope instability. Such parameters are morphometry elements, lithology and land cover. The resulting map, validated through historical landslides, classifies the entire complex according to five degrees of susceptibility, identifying Tuscolano-Artemisio caldera edge, Mt. Faete, and steep slopes of Nemi and Albano lakes at high and very high susceptibility. The instability of the entire complex is further investigated measuring the ground deformations observed by using InSAR data in the period 2016-2023. InSAR results, validated through GNSS data, show the overall stability of the complex, except a few areas. In detail, an ongoing uplift of about 1.5 mm/yr is recorded in Genzano di Roma municipality. The InSAR results combined with the debris flows susceptibility map and historical landslides highlight the steep slopes of Albano and Nemi lakes and Giulianello locality, outside the caldera, as the areas potentially most predisposed to trigger debris flows as classified at very high susceptibility and affected by both ground deformations and historical debris flows.
      14  15
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    High-resolution susceptibility mapping of seismically induced landslides on Ischia island: the 2017 earthquake case study

    (Springfield, MO : AIMS Press, [2015]-, 2024-08-01) ; ; ; ;
    Ischia island represents the westernmost portion of the Phlegraean Volcanic District (Campania Region, Italy) and is characterized by the presence of Mt. Epomeo, a giant centrally located resurgent volcanic horst. This horst is controlled by fault systems and magmatic dynamics able to generate recurrent seismicity. Such seismicity, associated with the presence of volcanic terrains with different degrees of erodibility, makes Ischia highly subjected to several ground instability phenomena such as landslides. This multidisciplinary study aimed to map the seismically induced landslide susceptibility of the island, taking into account the Md 4.0 earthquake that occurred on August 21, 2017, as a reference seismic event. Eight parameters were isolated as relevant predisposing factors for landslide occurrence and combined, through GIS elaborations, to compute a numerical index (SNAP index) that quantified the seismically induced landslide susceptibility for each 5 × 5 m area. The resulting map, through five classes of susceptibility, highlights that the highest exposed areas are mainly localized along the N-NW flanks of Mt. Epomeo, involving mainly the municipality of Casamicciola Terme. Moreover, the map is discussed considering the spatial 574
      11  72
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Lahar events in the last 2000 years from Vesuvius eruptions – Part 3: Hazard assessment over the Campanian Plain

    In this study we present a novel general methodology for probabilistic volcanic hazard assessment (PVHA) for lahars. We apply the methodology to perform a probabilistic assessment in the Campanian Plain (southern Italy), focusing on syn-eruptive lahars from a reference size eruption from Somma–Vesuvius. We take advantage of new field data relative to volcaniclastic flow deposits in the target region (Di Vito et al., 2024b) and recent improvements in modelling lahars (de' Michieli Vitturi et al., 2024). The former allowed defining proper probability density functions for the parameters related to the flow initial conditions, and the latter allowed computationally faster model runs. In this way, we are able to explore the effects of uncertainty in the initial flow conditions on the invasion of lahars in the target area by sampling coherent sets of values for the input model parameters and performing a large number of simulations. We also account for the uncertainty in the position of lahar generation by running the analysis on 11 different catchments threatening the Campanian Plain. The post-processing of the simulation outputs led to the production of hazard curves for the maximum flow thickness reached on a grid of points covering the Campanian Plain. By cutting the hazard curves at selected threshold values, we produce a portfolio of hazard maps and probability maps for the maximum flow thickness. We also produce hazard surface and probability maps for the simultaneous exceeding of pairs of thresholds in flow thickness and dynamic pressure. The latter hazard products represent, on one hand, a novel product in PVHA for lahars and, on the other hand, a useful means of impact assessment by assigning a probability to the occurrence of lahars that simultaneously have a relevant flow thickness and large dynamic pressure.
      210  104
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Lahar events in the last 2000 years from Vesuvius eruptions – Part 1: Distribution and impact on densely inhabited territory estimated from field data analysis

    Lahars represent some of the most dangerous phenomena in volcanic areas for their destructive power, causing dramatic changes in the landscape with no premonitory signs and impacting the population and infrastructure. In this regard, the Campanian Plain turns out to be very prone to the development of these phenomena, since the slopes of the Somma–Vesuvius and Campi Flegrei volcanoes, along with the Apennine reliefs, are mantled by pyroclastic deposits that can be easily remobilized, especially after intense and/or prolonged rainfall. This study focuses on the analysis of pyroclastic fall and flow deposits and of the syn- and post-eruptive lahar deposits related to two sub-Plinian eruptions of Vesuvius in 472 CE (Pollena) and 1631. To begin with, historical and field data from the existing literature and from hundreds of outcrops were collected and organized into a database, which was integrated with several new pieces of data. In particular, stratigraphic, sedimentological (facies analysis and laboratory), and archeological analyses were carried out, in addition to rock magnetic investigations and impact parameter calculations. The new data are also referenced to the finding of ash beds in more distal areas, which were included in new isopach maps for the two sub-Plinian eruptions. The results show that for both eruptions the distribution of the primary deposits is wider than previously known. A consequence of these results is that a wider areal impact should be expected in terms of civil protection, as the sub-Plinian scenario is the reference one for a future large eruption of Vesuvius. Such a distribution of the pyroclastic deposits directly affects the one of the lahar deposits, also because a significant remobilization took place during and after the studied eruptions, which involved distal phreatomagmatic ash. From these integrated analyses, it was possible to constrain the timing of the deposition and the kind of deposits remobilized (pyroclastic fall vs. flow), and it was possible to calculate the velocities and dynamic pressures of the lahars and ultimately infer the lahar transport and emplacement mechanisms. The multidisciplinary approach adopted in this work shows how it is crucial to assess the impact of lahars in densely populated areas even at distances of several to tens of kilometers from active volcanoes. This especially applies to large parts of the densely populated areas around Somma–Vesuvius up to the nearby Apennine valleys.
      222  41
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    High-resolution mapping and dispersion analyses of volcanic ballistics emitted during the 3rd July 2019 paroxysm at Stromboli

    A detailed mapping of volcanic ballistic projectiles emplaced in a defined area, represents the starting point to derive preparatory data in hazard and risk studies of ballistics phenomena. Considering as case study the 3rd July 2019 paroxysmal eruption occurred at Stromboli volcano, we map and analyse at very high spatial resolution (8 cm) the distribution of the ballistic spatter clasts emplaced on the E flank of the volcano. The resulting map identifies and reproduces as geospatial polygon elements 152,228 spatter clasts with areal dimensions from 0.03 to 4.23 m2. Dispersed on 0.407 km2, the spatters cover an area of 29,000 m2 corresponding to an erupted products volume from 2.3 to 7.0 × 103 m3, calculated here for the first time. Spatial analyses indicate that the area mostly affected by the clasts emplacement is between N67.5 and N135 directions, identifying a preferential deposition between N112.50 and N123.75 directions. The clasts size distribution rapidly decreases with the size increase, highlighting a nearly constant ratio small/large clasts regardless the distance from the vent. Finally, additional investigations reveal that clasts dispersion parameters decrease progressively with the distance from the vent only along one direction (N67.5), highlighting how the morphology influences the deposition and remobilisation of mapped ballistics.
      105  101
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Vents opening susceptibility map of the Colli Albani long dormant volcano

    Despite their protracted periods of inactivity, long-dormant volcanoes may be highly hazardous, as their reactivation can be characterized by violent explosive eruptions. An example of such volcanoes is the Colli Albani caldera, onto which deposits Rome Capital City is built, Italy. Its last volcanic activity was characterized by voluminous maar-forming phreatomagmatic eruptions dated between 36 and 25ka, but the volcano has produced several maar lake overflows during the Holocene till historical times. Presently, Colli Albani is affected by recurrent seismic events, anomalous heat flow, ground uplifts, hydrothermal circulation and gas emissions. For these reasons, the Italian Civil Protection has recently listed Colli Albani among the ten active volcanoes of Italy, but products for the evaluation of its volcanic hazards lacking. This work presents the first study on vent opening susceptibility mapping at Colli Albani. We explore the potential of an available geological dataset for building, through geographic information system analysis, an index that classifies areas at different vents opening susceptibility (low, moderate and high). Such result highlights as a solid geological mapping is a prerequisite for the volcanic hazard assessment, especially in remote or poorly studied long-dormant volcanoes such as caldera systems where the location of new vents could occur in different volcano sectors.
      70  104
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The set up of the “UNO” Project relational database for Stromboli volcano

    Active volcanoes are complex, poorly predictable systems that can pose a threat to humans and their infrastructures. As such, it is important to improve as much as possible the understanding of their behavior. The Stromboli volcano, in Italy, is one of the most active volcanoes in the world, and its almost persistent activity is documented since centuries. The persistent background activity is sometimes interrupted by much more energetic, dangerous episodes. The Istituto Nazionale di Geofisica e Vulcanologia (Italy) set up the interdisciplinary “UNO” project, aimed to understand when the Stromboli volcano is about to switch from the ordinary to the extraordinary activity. The UNO project includes an outstanding variety of research activities, such as sampling in the field, the modeling of Stromboli topography from ALS technique and satellite data, the 3D numerical simulations of ballistic trajectories, or the set up of an ultrasonic microphones system. Key to the success of the project is the collection of integrated high spatial and temporal resolution data and their joint analyses in a shared relational database. We present here the simplified logical model of such database, focusing on the identification of entities and their relationships.
      19  34
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Probabilistic hazard mapping of secondary pyroclastic density currents generated by paroxysm events at Stromboli (Italy)

    Pyroclastic density currents (PDCs) at Stromboli are typically associated with Strombolian paroxysms. The main mechanisms originating the currents include the eruptive column collapse (i.e. primary PDC), and the remobilization and avalanching of fresh pyroclastic deposits (i.e. secondary PDC). Whereas primary PDCs are commonly confined into the Sciara del Fuoco (SdF), a steep depression on the northwestern side of the island, at least during the paroxysms of 1906, 1930 and 1944 secondary PDCs flowed out of it. These currents were mostly channelized in the valleys on the volcano flanks, and they inundated and buried regions at low elevation, finally reaching the sea and producing temporary deltas of pyroclastic material. The PDCs during the great paroxysm of 1930 reached San Vincenzo village, causing victims and damage to the buildings. In the two paroxysms of 2019 PDCs occurred in the SdF. Although the PDCs were confined inside the depression, they continued to flow over the water for several hundred meters. Moreover, during the paroxysm of July 3, 2019, tephra deposits emplaced on steep slopes right above the village of Ginostra produced small avalanches of incandescent rocks, which fortunately did not get further. Presently, PDCs represent one of the main dangerous manifestation of volcanic activity at Stromboli and therefore need quantitative hazard assessment. In this study we perform new simulations of various 2D depth averaged models of granular flows also considering the effect of some sources of uncertainty. Focusing on secondary PDCs, the source location of the flow was also assumed uncertain, and therefore we adopted a source zonation based on the analysis of topographic slopes and watersheds basins in the upper part of the island, where thick tephra deposits could more likely accumulate during a future paroxysm. Results highlight the areas more exposed to this phenomenon as a function of the model inputs.
      69  106
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Probabilistic hazard modeling of secondary pyroclastic avalanches generated by paroxysms at Stromboli (Italy)

    The remobilization and avalanching of fresh pyroclastic deposits are relatively common at Stromboli. They are usually confined to the Sciara del Fuoco (SdF), a steep depression on the northwestern side of the island. However, at least during the Strombolian paroxysms in 1944, 1930, and possibly in 1906, pyroclastic avalanches occurred out of SdF, flowed in the valleys on the volcano flanks, inundated regions at low elevation, and, finally, they reached the sea and produced vaste temporary deltas. In particular, in the 1930 event, the pyroclastic avalanche reached San Vincenzo village, causing victims and damage to the buildings. In this study we perform an uncertainty quantification on the inputs of the 2D depth-averaged model, preliminary to a comparison with the available field data. In particular, because the source location of the flow is also assumed uncertain, we adopt a simplified source zonation based on the analysis of topographic slopes, distance from the eruptive craters, and watersheds basins in the upper part of the island, where thick tephra deposits could more likely accumulate during a future paroxysm.
      53  149
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Ten years of volcanic activity at Mt Etna: High-resolution mapping and accurate quantification of the morphological changes by Pleiades and Lidar data

    The topography of Mt. Etna, Italy, is subjected to continuous modifications depending on intensity and magnitude of eruptions that frequently occur at the volcano summit and flanks. In order to make high-resolution maps of morphological changes and accurately calculate the overall volume of the erupted products (e.g., lava flows, tephra fall out, scoriae cones) in ten years, we have compared the altimetry models of Mt. Etna derived from 2005 Airborne Laser Scanning data and 2015 Pleiades stereo satellite imagery. Both models cover a common area of 400 km2 with spatial resolution of 2 m and comparable vertical accuracy (RMSE <0.8 m). The results show that the area most affected by the erupted products is the mid-upper portion of the volcano with an altitude ranging from 1300 m to more than 3300 m a.s.l., value reached at the summit of the North East crater. In particular, this portion changes dramatically in the eastern sector due to the birth and growth of the New South- East Crater, the invasion of dozens of lava flows in the Valle del Bove, and the formation of the 2014 scoriae cones and lava field at the base of the North-East Crater. The total volume of products erupted in the investigated period results in 284.3±15.8 x 106 m3 with a yearly average volume of 28.4 x 106 m3/y comparable with the previous decades. In addition, the products emitted by the 2014 sub-terminal eruption are mapped and quantified including, for the first time, the volume of the 2014 scoriae cones generated on the eastern flank of North- East Crater This study demonstrates how a rigorous comparison between digital elevation models derived from different remote sensing techniques produce high accurate mapping and quantifications of morphological changes applicable for worldwide active volcanoes. This allows to quantify volumes and areas of erupted products reducing the error estimations, a crucial point to provide precise data often used as key parameters for many volcanic hazard studies.
      535  179