Skip to main content
The search returned 17 results
Now showing 1 - 10 of 17
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,
      7  9
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Which Fault Threatens Me Most? Bridging the Gap Between Geologic Data-Providers and Seismic Risk Practitioners

    The aim of the Fault2SHA European Seismological Commission Working Group Central Apennines laboratory is to enhance the use of geological data in fault-based seismic hazard and risk assessment and to promote synergies between data providers (earthquake geologists), end-users and decision-makers. Here we use the Fault2SHA Central Apennines Database where geologic data are provided in the form of characterized fault traces, grouped into faults and main faults, with individual slip rate estimates. The proposed methodology first derives slip rate profiles for each main fault. Main faults are then divided into distinct sections of length comparable to the seismogenic depth to allow consideration of variable slip rates and the exploration of multi-fault ruptures in the computations. The methodology further allows exploration of epistemic uncertainties documented in the database (e.g., main fault definition, slip rates) as well as additional parameters required to characterize the seismogenic potential of fault sources (e.g., 3D fault geometries). To illustrate the power of the methodology, in this paper we consider only one branch of the uncertainties affecting each step of the computation procedure. The resulting hazard and typological risk maps allow both data providers and end-users 1) to visualize the faults that threaten specific localities the most, 2) to appreciate the density of observations used for the computation of slip rate profiles, and 3) interrogate the degree of confidence on the fault parameters documented in the database (activity and location certainty). Finally, closing the loop, the methodology highlights priorities for future geological investigations in terms of where improvements in the density of data within the database would lead to the greatest decreases in epistemic uncertainties in the hazard and risk calculations. Key to this new generation of fault-based seismic hazard and risk methodology are the user-friendly open source codes provided with this publication, documenting, step-by-step, the link between the geological database and the relative contribution of each section to seismic hazard and risk at specific localities
      131  51
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Surface ruptures following the 30 October 2016 Mw 6.5 Norcia earthquake, central Italy

    We present a 1:25,000 scale map of the coseismic surface ruptures following the 30 October 2016 M-w 6.5 Norcia normal-faulting earthquake, central Italy. Detailed rupture mapping is based on almost 11,000 oblique photographs taken from helicopter flights, that has been verified and integrated with field data (>7000 measurements). Thanks to the common efforts of the Open EMERGEO Working Group (130 people, 25 research institutions and universities from Europe), we were able to document a complex surface faulting pattern with a dominant strike of N135 degrees-160 degrees (SW-dipping) and a subordinate strike of N320 degrees-345 degrees (NE-dipping) along about 28km of the active Mt. Vettore-Mt. Bove fault system. Geometric and kinematic characteristics of the rupture were observed and recorded along closely spaced, parallel or subparallel, overlapping or step-like synthetic and antithetic fault splays of the activated fault systems, comprising a total surface rupture length of approximately 46km when all ruptures were considered.
      6034  219
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Out of phase Quaternary uplift-rate changes reveal normal fault interaction, implied by deformed marine palaeoshorelines

    We have mapped and constrained the timing of tectonically deformed uplifted Late Quaternary palaeoshorelines in the Messina Strait, southern Italy, an area above a subduction zone containing active normal faults. The palaeoshorelines are preserved from up to thirteen Late Quaternary sea-level highstands, providing a record of the deformation over this timescale (~500 ka) for the Messina-Taormina Fault, the Reggio Calabria Fault and the Armo Fault. The palaeoshorelines reveal spatial patterns of uplift through time along the strike of these normal faults, and, given the across strike arrangement of the faults, also reveal how the contribution of each fault to the regional strain-rate progressed through time. The results reveal that the uplift rates mapped within the fault hangingwalls and footwalls were not constant through time, with a marked change in the location of strain accumulation at ~50 ka. The uplift rates, once converted into throw-rates, imply that the three faults comprised similar throw-rates prior to ~50 ka (in the range 0.77–0.96 mm/yr), with the Armo and Reggio Calabria faults then switching to lower rates (0.32 mm/yr and 0.33 mm/yr respectively), whilst the Messina-Taormina Fault accelerated to 2.34 mm/yr. The regional extension rate, gained by summing the implied heave rates across the three faults, was maintained through time despite this re-organisation of local strain accumulation at ~50 ka. We explain these out-of-phase fault throw-rate changes during the constant-rate regional extension conditions as due to interactions between these upper plate normal faults. We finally discuss how fault throw-rates changing through time may affect a long-term seismic hazard assessment within active normal fault systems.
      82  42
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Surface faulting earthquake clustering controlled by fault and shear-zone interactions

    Surface faulting earthquakes are known to cluster in time from historical and palaeoseismic studies, but the mechanism(s) responsible for clustering, such as fault interaction, strain-storage, and evolving dynamic topography, are poorly quantified, and hence not well understood. We present a quantified replication of observed earthquake clustering in central Italy. Six active normal faults are studied using 36Cl cosmogenic dating, revealing out-of-phase periods of high or low surface slip-rate on neighboring structures that we interpret as earthquake clusters and anticlusters. Our calculations link stress transfer caused by slip averaged over clusters and anti-clusters on coupled fault/shear-zone structures to viscous flow laws. We show that (1) differential stress fluctuates during fault/shear-zone interactions, and (2) these fluctuations are of sufficient magnitude to produce changes in strain-rate on viscous shear zones that explain slip-rate changes on their overlying brittle faults. These results suggest that fault/shear-zone interactions are a plausible explanation for clustering, opening the path towards process-led seismic hazard assessments.
      77  100
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Empirical scaling correlations between fault lengths and fault slip-rates in seismically-active extensional regions: The Calabria and Messina Strait region (southern Italy) as case study

    In this study, we present scaling relationships between fault lengths, fault slip-rates and historical seismicity for an active normal fault system, seismically accommodating crustal extension within the upper plate of the Ionian subduction zone (southern Italy). This crustal extension is confirmed by historical seismicity and instrumental geodesy, with GNSS-derived values of horizonal deformation within a range of 2-3 mm/yr throughout Calabria and the Messina Strait region. We collated data for fault slip-rates, fault lengths and historical earthquakes for a given fault to explore whether fault slip-rates are correlated with fault size and their geometric moment.We present new results showing a robust correlation between fault lengths and fault slip-rates, which supports the idea of a relationship for a given fault between fault slip-rates and the geometric moment.We discuss our results in terms of how these correlations should be used if regional deformation is accommodated by localised strain on faults mostly arranged along strike rather than distributed strain on multiple faults across-strike. For instance, we compare our empirical correlation between fault lengths and fault throw-rates over the Middle-Late Pleistocene in Calabria and the Messina Strait with those from Central and Southern Apennines over the Holocene, characterized by strain distributed on multiple faults across-strike and strain localised on faults mostly arranged along-strike, respectively.Tectonic and seismic hazard implications are discussed for future investigations based on fault slip-rates, fault size and historical seismicity.
      26  45
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Spatial migration of temporal earthquake clusters driven by the transfer of differential stress between neighbouring fault/shear-zone structures

    Uncertainty concerning the processes responsible for slip-rate fluctuations associated with temporal clustering of surface faulting earthquakes is a fundamental, unresolved issue in tectonics, because strain-rates accommodated by fault/shear-zone structures are the key to understanding the viscosity structure of the crust and seismic hazard. We constrain the timing and amplitude of slip-rate fluctuations that occurred on three active normal faults in central Italy over a time period of 20–30 kyrs, using in situ 36Cl cosmogenic dating of fault planes. We identify five periods of rapid slip on individual faults lasting a few millennia, separated time periods of up to 10 millennia with low or zero slip-rate. The rapid slip pulses migrated across the strike between the faults in two waves from SW to NE. We replicate this migration with a model where rapid slip induces changes in differential stress that drive changes in strain-rate on viscous shear zones that drive slip-rate variability on overlying brittle faults. Earthquakes increase the differential stress and strain-rate on underlying shear zones, which in turn accumulate strain, re-loading stress onto the overlying brittle fault. This positive feedback produces high strain-rate episodes containing several large magnitude surface faulting earthquakes (earthquake clusters), but also reduce the differential stress on the viscous portions of neighbouring fault/shear-zones slowing the occurrence of large-magnitude surface faulting earthquakes (earthquake anticlusters). Shear-zones on faults experiencing anticlusters continue to accumulate viscous strain at a lowered rate, and eventually this loads the overlying brittle fault to failure, initiating a period of rapid slip through the positive feedback process described above, and inducing lowered strain-rates onto neighbouring fault/shear-zones. We show that these patterns of differential stress change can replicate the measured earthquake clustering implied by the 36Cl data. The stress changes are related to the fault geometry in terms of distance and azimuth from the slipping structure, implying that (a) strain-rate and viscosity fluctuations for studies of continental rheology, and (b) slip-rates for seismic hazard purposes are to an extent predictable given knowledge of the fault system geometry.
      57  95
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    QUIN 2.0 - new release of the QUaternary fault strain INdicators database from the Southern Apennines of Italy

    QUIN database integrates and organizes structural-geological information from published and unpublished sources to constrain deformation in seismotectonic studies. The initial release, QUIN1.0, comprised 3,339 Fault Striation Pairs, mapped on 445 sites exposed along the Quaternary faults of central Italy. The present Data Descriptor introduces the QUIN 2.0 release, which includes 4,297 Fault Striation Pairs on 738 Structural Sites from southern Italy. The newly investigated faults span ~500 km along the Apennines chain, with strikes transitioning from ~SE to ~SW and comprehensively details Fault Striation Pairs' location, attitude, kinematics, and deformation axes. Additionally, it offers a shapefile of the fault traces hosting the data. The QUIN 2.0 release offers a significant geographic extension to the QUIN 1.0, with comprehensive description of local geometric-kinematic complexities of the regional pattern. The QUIN data may be especially relevant for constraining intra-Apennine potential seismogenic deformation patterns, where earthquake data only offer scattered or incomplete information. QUIN's data will support studies aimed at enhancing geological understanding, hazard assessment and comprehension of fault rupture propagation and barriers.
      6  63
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    QUIN 2.0 - new release of the QUaternary fault strain INdicators database from the Southern Apennines of Italy

    QUIN database integrates and organizes structural-geological information from published and unpublished sources to constrain deformation in seismotectonic studies. The initial release, QUIN1.0, comprised 3,339 Fault Striation Pairs, mapped on 445 sites exposed along the Quaternary faults of central Italy. The present Data Descriptor introduces the QUIN 2.0 release, which includes 4,297 Fault Striation Pairs on 738 Structural Sites from southern Italy. The newly investigated faults span ~500 km along the Apennines chain, with strikes transitioning from ~SE to ~SW and comprehensively details Fault Striation Pairs' location, attitude, kinematics, and deformation axes. Additionally, it offers a shapefile of the fault traces hosting the data. The QUIN 2.0 release offers a significant geographic extension to the QUIN 1.0, with comprehensive description of local geometric-kinematic complexities of the regional pattern. The QUIN data may be especially relevant for constraining intra-Apennine potential seismogenic deformation patterns, where earthquake data only offer scattered or incomplete information. QUIN's data will support studies aimed at enhancing geological understanding, hazard assessment and comprehension of fault rupture propagation and barriers.
      42  128
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Characteristics and modelling of slip-rate variability and temporal earthquake clustering across a distributed network of active normal faults constrained by in situ 36Cl cosmogenic dating of fault scarp exhumation, central Italy

    (Elsevier Science Limited:Oxford Fulfillment Center, PO Box 800, Kidlington Oxford OX5 1DX United Kingdom:011 44 1865 843000, 011 44 1865 843699, EMAIL: asianfo@elsevier.com, tcb@elsevier.co.UK, INTERNET: http://www.elsevier.com, http://www.elsevier.com/locate/shpsa/, Fax: 011 44 1865 843010, 2025-06) ; ; ; ;
    We present a compilation of new and unpublished in situ 36 Cl cosmogenic isotope data recording the exhumation of 27 active normal fault planes by earthquake slip for the central Apennines, Italy. We do this to constrain the characteristics of slip-rate variability and temporal earthquake clustering and anticlustering across the entire extending orogen, and to assess why it occurs. From the 36 Cl observations we report(1) the long-term slip-rates averaged since 20 ka, (2) the percentage of sites with clusters and anticlusters in each 1 kyrs time-slice back to 20 ka, (3) regional maps showing cluster locations for every 1 kyr time-slice, (4) cluster and anticluster durations, and (5) the amounts of slip and slip-rates averaged over the duration of clusters and anticlusters. To study why this slip-rate variability has developed we conduct modelling of stress interactions between faults and underlying shear-zones, and between neighbouring fault/shear-zone structures. We show that the measured slip-rate variability and temporal clustering can be replicated by a model where the transfer of differential stress between faults and their underlying shearzones, and between neighbouring fault/shear-zone structures, produces changes in strain-rates on underlying viscous shear-zones which drive periods of rapid or reduced slip-rate on their overlying faults. We suggest that stress and hence strain-rate increase on an underlying shear-zone produced by coseismic slip on its overlying fault is the mechanism that initiates an earthquake cluster. Clusters progress because the increased strain-rate on the shear-zone reloads the overlying fault producing a positive feedback loop. The clusters also produce stress reduction on fault/shear-zones located across strike, initiating anticlusters in those locations. The durations of anticlusters will be set by the summed coseismic and interseismic stress changes through time, because although these shear-zones develop relatively low viscous strain-rates, eventually they will load their overlying fault to failure initiating a new cluster. These interactions cause the locations of clusters and anticlusters to migrate across and along-strike within the fault system. Such constraints on the processes producing clustering and anticlustering should allow observations of these phenomena to be included in probabilistic seismic hazard assessments (PSHA), and interpretations of the rheology of deforming continental crust.
      9