Cantarero, Massimo
Preferred name
Cantarero, Massimo
Email
massimo.cantarero@ingv.it
Staff
staff
ORCID
36 results
Filters
Settings
The search returned 36 results
Now showing 1 - 10 of 36
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Refined prediction of vertical gradient of gravity at Etna volcano gravity network (Italy)
Predicted values of the vertical gradient of gravity (VGG) on benchmarks of Etna’s monitoring system, based on calculation of the topographic contribution to the theoretical free-air gradient, are compared with VGG values observed in situ. The verification campaign indicated that improvements are required when predicting the VGGs at such networks. Our work identified the following factors to be resolved: (a) accuracy of the benchmark position; (b) gravitational effect of buildings and roadside walls adjacent to benchmarks; (c) accuracy of the digital elevation model (DEM) in the proximity of benchmarks. Benchmark positions were refined using precise geodetic methods. The gravitational effects of the benchmark-adjacent walls and buildings were modeled and accounted for in the prediction. New high-resolution DEMs were produced in the innermost zone at some benchmarks based on drone-flown photogrammetry to improve the VGG prediction at those benchmarks. The three described refinements in the VGG prediction improved the match between predicted and in situ observed VGGs at the network considerably. The standard deviation of differences between the measured and predicted VGG values decreased from 36 to 13 μ Gal/m.654 148 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Il terremoto di Fleri (Etna) del 26 dicembre 2018 Mw 4.9. Parte II: rilievo degli effetti di fagliazione cosismica superficiale
(2019-11-12); ; ; ; Il terremoto del 26 dicembre 2019, ore 02:19 UTC, che ha colpito il basso versante sud-orientale dell’Etna, ha prodotto non solo danni gravi e distruzioni nell’area epicentrale, pari al grado 8 EMS (Azzaro et al., in questo volume), ma anche vistose rotture superficiali lungo la faglia di Fiandaca, che è la struttura più meridionale del sistema tettonico delle Timpe (Fig. 1a). Gli effetti di fagliazione cosismica in area etnea sono storicamente piuttosto frequenti in occasione di terremoti superficiali (< 2-3 km), anche per valori di magnitudo relativamente modesti (M ≥ 3.5, vedi Azzaro, 1999). Con una magnitudo Mw 4.9 (Regional Centroid Moment Tensors, https://doi.org/10.13127/rcmt/italy), il terremoto in questione rappresenta l’evento più significativo, in termini di entità e complessità della fagliazione associata, verificatosi nell’area etnea negli ultimi 70 anni, con una estensione della rottura superiore rispetto a quelle storiche (< 6.5 km). Il gruppo di emergenza per il rilievo degli effetti geologici cosismici EMERGEO (http://emergeo.ingv.it) dell’INGV, si è pertanto attivato effettuando quattro campagne di misura con squadre che si sono alternate sul terreno (per un totale di 60 gg/persona), supportate da personale del proprio Centro Operativo per l’organizzazione dei dati e il popolamento del database (43 gg/persona). Il rilievo ha consentito la raccolta e catalogazione di circa 900 punti di misura relativi a posizionamento, geometria, rigetto e cinematica delle fratture cosismiche.241 254 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Surface ruptures database related to the 26 December 2018, MW 4.9 Mt. Etna earthquake, southern Italy
(2020-02-07); ; ; ; We provide a database of the surface ruptures produced by the 26 December 2018 Mw 4.9 earthquake that struck the eastern flank of Mt. Etna volcano in Sicily (southern Italy). Despite its relatively small magnitude, this shallow earthquake caused about 8 km of surface faulting, along the trace of the NNW-trending active Fiandaca Fault. Detailed field surveys have been performed in the epicentral area to map the ruptures and to characterize their kinematics. The surface ruptures show a dominant right-oblique sense of displacement with an average slip of about 0.09 m and a maximum value of 0.35 m. We have parsed and organized all observations in a concise database, with 932 homogeneous georeferenced records. The Fiandaca Fault is part of the complex active Timpe faults system affecting the eastern flank of Etna, and its seismic history indicates a prominent surface-faulting potential. Therefore, this database is essential for unravelling the seismotectonics of shallow earthquakes in volcanic areas, and contributes updating empirical scaling regressions that relate magnitude and extent of surface faulting.4586 96 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The influence of volcano topographic changes on infrasound amplitude: lava fountains at Mt. Etna in 2021
Infrasound signals are used to investigate and monitor active volcanoes during eruptive and degassing activity. Infrasound amplitude information has been used to estimate eruptive parameters such as plume height, magma discharge rate, and lava fountain height. Active volcanoes are characterized by pronounced topography and, during eruptive activity, the topography can change rapidly, affecting the observed infrasound amplitudes. While the interaction of infrasonic signals with topography has been widely investigated over the past decade, there has been limited work on the impact of changing topography on the infrasonic amplitudes. In this work, the infrasonic signals accompanying 57 lava fountain paroxysms at Mt. Etna (Italy) during 2021 were analyzed. In particular, the temporal and spatial variations of the infrasound amplitudes were investigated. During 2021, significant changes in the topography around the most active crater (the South East Crater) took place and were reconstructed in detail using high resolution imagery from unoccupied aerial system surveys. Through analysis of the observed infrasound signals and numerical simulations of the acoustic wavefield, we demonstrate that the observed spatial and temporal variation in the infrasound signal amplitudes can largely be explained by the combined effects of changes in the location of the acoustic source and changes in the near-vent topography, together with source acoustic amplitude variations. This work demonstrates the importance of accurate source locations and high-resolution topographic information, particularly in the near-vent region where the topography is most likely to change rapidly and illustrates that changing topography should be considered when interpreting local infrasound observations over long time scales.342 46 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Unoccupied Aircraft Systems (UASs) Reveal the Morphological Changes at Stromboli Volcano (Italy) before, between, and after the 3 July and 28 August 2019 Paroxysmal Eruptions
In July and August 2019, two paroxysmal eruptions dramatically changed the morphology of the crater terrace that hosts the active vents of Stromboli volcano (Italy). Here, we document these morphological changes, by using 2259 UAS-derived photographs from eight surveys and Structure-from-Motion (SfM) photogrammetric techniques, resulting in 3D point clouds, orthomosaics, and digital surface models (DSMs) with resolution ranging from 8.1 to 12.4 cm/pixel. We focus on the morphological evolution of volcanic features and volume changes in the crater terrace and the upper part of the underlying slope (Sciara del Fuoco). We identify both crater terrace and lava field variations, with vents shifting up to 47 m and the accumulation of tephra deposits. The maximum elevation changes related to the two paroxysmal eruptions (in between May and September 2019) range from +41.4 to −26.4 m at the lava field and N crater area, respectively. Throughout September 2018–June 2020, the total volume change in the surveyed area was +447,335 m3. Despite Stromboli being one of the best-studied volcanoes worldwide, the UAS-based photogrammetry products of this study provide unprecedented high spatiotemporal resolution observations of its entire summit area, in a period when volcanic activity made the classic field inspections and helicopter overflights too risky. Routinely applied UAS operations represent an effective and evolving tool for volcanic hazard assessment and to support decision-makers involved in volcanic surveillance and civil protection operations.991 112 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Surface Faulting of the 26 December 2018, Mw 5 Earthquake at Mt. Etna Volcano (Italy): Geological Source Model and Implications for the Seismic Potential of the Fiandaca Fault
At Mt. Etna (Italy), volcano-tectonic earthquakes produce impressive surface faulting despite their moderate magnitude (M < 5.5), with historically well-documented ruptures featuring end-to-end lengths up to 6–7 km. The 26 December 2018, Mw 5.0 earthquake represents the strongest event of the last 70 years, with ground ruptures extending for 7.5 km along the Fiandaca fault, a partially hidden structure in the volcano's eastern flank. Field data collected by the EMERGEO Working Group (INGV) are here integrated with high-resolution photogrammetric surveys and geological-morphological observations to enable a detailed structural analysis and to reconstruct the morphotectonic process of fault growth. The deformation zone develops in a transtensional regime and shows a complex pattern, consisting of brittle structures arranged in en-échelon scale-invariant overlapping systems. Offsets and kinematics vary along the strike due to a major bend in the fault trace. We reconstructed a prevailing right-lateral displacement in the northern section of the fault and a dextral oblique slip in the southern one (max 35 cm); the dip-slip component increases southward (max 50 cm) and overall resembles the along-strike pattern of the long-term morphological throw. The kinematic analysis indicates a quasi-rigid behavior of the two fault blocks and suggests a geological model of rupture propagation that explains both the location of the seismic asperity in the northern section of the Fiandaca fault and the unclamping in the southern one. These findings are used to propose a conceptual model of the fault, representing insights for local fault-based seismic hazard assessment.944 177 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Debris-flow hazard assessment at the archaeological UNESCO world heritage site of Villa Romana del Casale (Sicily, Italy)
Archaeological sites are extremely vulnerable to the impacts of weather-related events, which may lead to irreparable damages to cultural heritage. Here an assessment of the debris-flow hazard for the UNESCO site of Roman Villa del Casale (Italy) is carried out, through a combination of historical analyses, field surveys, geomorphological and hydrological investigations and two-dimensional hydraulic numerical modelling, all performed at river catchment scale. Historical analyses reveal that the site has been hit by several landslides in the far and recent past. This is presently confirmed by the high level of exposure to the impact of rain-triggered debris-flow events, due to the position of the Villa at a closure section of the related river basin and to the hydro- geomorphological characteristics of the basin itself. By applying the proposed approach, a scenario analysis is carried out. Results allow one to highlight the dynamics of the impact of debris flows, thanks to space and time- dependent maps about deposition areas, water depth and speed values, and to identify the most vulnerable archaeological elements within the study site. The numerical simulations are also used to test the efficiency of the existing hydraulic defense systems and to support the implementation of an early warning system for the site protection. Here, we also synthetize the design of the architecture of the wireless monitoring network, the sensor technology adopted to develop an effective real time environmental monitoring system and management plat-form, to construct a Wireless Sensor Network (WSN) - early warning and reporting system, which can be applied as a prevention measure.39 89 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , One hundred lava flows of Mt. Etna, Italy: July 2019–December 2023 update
Integration of multi-sensor, multi-platform remotely sensed data is an effective methodology for monitoring active volcanoes as it ensures a constant data flow, which is needed for repeated eruptive events in brief intervals. It allows broad observation of the eruptive scenario and quantification of the erupted products. We integrated remote sensing data, through GIS software, to map the lava flows of Etna, one of the most active volcanoes in the world. Between July 2019 and December 2023, Etna gave rise to seventy-five eruptive events, mainly from the summit craters, emplacing one hundred lava flows. We updated Etna’s 1999-2019 map, with the most recent eruptive products, mapping ninety-three lava flows out of the one hundred-five. For cartographic simplicity, summit flows are grouped by year or eruptive cycle, while flank flows are distinguished by date. To better display the products and highlight the mapping process, we added twenty-one detailed maps to the main map.36 23 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , UAVs for volcano monitoring: A new approach applied on an active lava flow on Mt. Etna (Italy), during the 27 February–02 March 2017 eruption
Mt. Etna (Italy)with 55 effusive events in the last six years is one of themost active volcanoes in theworld,with a million people living on its flank and thousands of tourists who visit it every summer. For this reason, the lava flowmonitoring for riskmitigation and Civil Protection purposes is one of the fundamental tasks of the Cartographic Laboratory of the Istituto Nazionale di Geofisica e Vulcanologia, Osservatorio Etneo. This activity was traditionally performed using data collected from the field (with terrestrial GPS surveys) and from helicopter taking visible and thermal images. During the 27 February–02 March 2017 eruption the FlyEye Team, applied Unmanned Aerial Vehicles to monitor the active lava flow. Two high-resolution UAV surveys were performed on the lava flow field on the south flank of Mt. Etna, between 3050 and 2600 m a.s.l., obtaining almost 1170 images. Structure-from-Motion techniques were applied to create orthophotos and Digital Elevation Models (DEM) of the lava flowfield and surroundings. The obtained DEMhas a resolution of 14.2, and 20.7 cm/px for the main lava flow and the west branch, respectively. On the wall, the 96% of the lava flow field was mapped using aerial images by UAV covering an area of 0.3 × 106 m2. Lava flow volume was calculated with the topographic approach: difference between post- and pre-eruption surface, DEM 2017 and DEM 2014, respectively. The impossibility of spreading the GCPs homogenously distorted the resulting DEM; for this reason, it was necessary to align the lava flow point clouds, obtained from the photogrammetry software, to the basal 2014 DEM. Subtracting the two DEMs a lava flow thickness grid resulted leading to a total volume of 1.4 × 106 m3 and an error estimation of about 20%. Finally, dividing the total volume for the effusion duration (63 h) a mean output rate of 6.2 m3/s resulted. The calculated volcanological parameters have the same order of magnitude of the previous activity ofMt. Etna, between 2011 and 2016. This research demonstrates thatUAV photogrammetry was successfully exploited during an eruptive crisis, allowing a first fast processing, to obtain an orthophoto of the lava flow field, useful for “decision makers” and a further slower processing for the realization of a highresolution DEM. The lattermakes it possible to update the topography, another important argument for Civil Protection purpose. This paper describes a methodology that could be applied during other natural events in extreme environmental conditions.599 6 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Terrestrial Laser Scanning (TLS) over volcanic areas: experiments on Vesuvius, Stromboli and Vulcano (Italy)
(2011-04-06); ; ; ; Geomorphological changes of areas affected by crustal deformation, eruptive events, gravitative instabilities, land- slide and glacier evolution, and other phenomena, can be detected and quantified using high-accuracy digital sur- face models. The comparison between multitemporal models provides a space-time description of geophysical processes, and can be used to estimate deformation patterns, displacements, surface variations, volumes involved in mass movements, and other physical features. Several techniques, including GPS kinematic methodology, digi- tal aerial and terrestrial photogrammetry, airborne and terrestrial laser scanning, satellite-based and ground-based interferometric radar and optical satellite imagery systems, are suitable surveying methods that provide appropriate spatial resolution. Terrestrial Laser Scanning (TLS) allows an accurate and cost-effective representation of the topographical details of the observed surface. For this reason, TLS is currently used in geologic survey, engineering practice, cultural heritage, and mobile mapping. Besides the geometric data, the point cloud provided by a TLS observation con- tains radiometric information, i.e. the intensity of the received pulses, that can be used for classification purposes. Moreover, some instruments are equipped with a calibrated camera to add RGB color data to the intensity data. Since a TLS survey, including the corresponding data processing and analysis, can be carried out in relatively short time, an operational procedure can be planned and executed. The TLS and other remote sensing techniques, like digital photogrammetry, can be integrated to profit from the strength of each single technique and overcome the corresponding weakness, leading to a better modeling of the observed system. We show the results of observations on three Italian volcanoes by using a TLS recently implemented in the moni- toring system of the INGV. The most complete set has been acquired on Mt. Vesuvius crater in May 2005, October 2006 and June 2009. The whole crater was measured with several overlapped scans and the corresponding digital surface models were generated and registered into the UTM-WGS84 reference frame. The comparison between the models leads to an evaluation of the occurred changes. The deformation maps showed a progressive mass loss due to rock-falls in an area of about 5000 m2 with a corresponding accumulation at the bottom of the crater. The volume loss which occurred from 2005 to 2009, was computed by subtraction of volumes defined with respect to reference planes parallel to the caldera walls and was estimated to be 20300 m3. Some results were also in- terpreted on the basis of micro-seismic and meteorological data in order to plan a monitoring technique where seismic signals related to rock-fall and/or signals of intense rainfalls are used as alarms for fast TLS surveys able to characterize the corresponding changes of the caldera walls. The proposed methodology, in particular the simple but effective approach used in the estimation of volume uncertainties, can be applied to each rock slope instability phenomenon, regardless to the particular environment. Two measurements were carried out at Vulcano in April 2009, by surveying the whole “La Fossa” crater and the “La Forgia” unstable slope, and in April 2010, by re-surveying again the “La Forgia” slope. All measurements were acquired with several overlapped scans. The comparison between the two measurements at “La Forgia” shows small change in the morphology that will be further investigated by new measurements; new measures will also be carried out to image again the “La Fossa” crater. Measurements at Stromboli were aimed at testing the capability of the technique in very difficult surveying con- ditions: the 2007 lava fan in the Sciara del Fuoco, an inaccessible and unstable area of the Stromboli volcano. In such a condition, TLS observes the fan only with high incidence angles and from distances longer than La Fossa case. In addition, the lava fan consists in black porous lavas, characterized by a bad reflectivity.221 308
