Skip to main content
The search returned 40 results
Now showing 1 - 10 of 40
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Debris Flows and Ground Deformation at Colli Albani Hills Volcano (Italy)

    (Basel: Birkhäuser 1964-, 2025-04-09) ; ; ; ;
    Colli Albani Hills, a volcanic complex located 20 km SE of Roma (Italy), represents a long-dormant caldera system and its last eruption is dated back * 20 ky. It is subjected to seismic swarms, gaseous emissions and ground deformations. The whole volcanic complex is affected by landslides of different typologies and in the past the most frequent were debris flows. In this study, for the first time, the debris flows susceptibility of the complex is mapped through a heuristic approach that combines parameters recognized in literature as the main predisposing factors to slope instability. Such parameters are morphometry elements, lithology and land cover. The resulting map, validated through historical landslides, classifies the entire complex according to five degrees of susceptibility, identifying Tuscolano-Artemisio caldera edge, Mt. Faete, and steep slopes of Nemi and Albano lakes at high and very high susceptibility. The instability of the entire complex is further investigated measuring the ground deformations observed by using InSAR data in the period 2016-2023. InSAR results, validated through GNSS data, show the overall stability of the complex, except a few areas. In detail, an ongoing uplift of about 1.5 mm/yr is recorded in Genzano di Roma municipality. The InSAR results combined with the debris flows susceptibility map and historical landslides highlight the steep slopes of Albano and Nemi lakes and Giulianello locality, outside the caldera, as the areas potentially most predisposed to trigger debris flows as classified at very high susceptibility and affected by both ground deformations and historical debris flows.
      15  17
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    On the Monitoring of Small Islands Belonging to the Aeolian Archipelago by MT-InSAR Data

    (Basel: Birkhäuser 1997-, 2025) ; ; ; ;
    The aim of the present work is to evaluate the performance of several MT-InSAR techniques based on satellite SAR data in monitoring ground deformation phenomena affecting complex scenarios such as small islands of volcanic origin. To such purpose, PS, SBAS and IPTA approaches are applied in the study of Lipari, Salina and Vulcano islands belonging to the Aeolian archipelago, southern Tyrrhenian Sea, Italy. The outcomes retrieved from each technique are then discussed in terms of intrinsic features, spatial coverage, linear trend and coherence. Moreover, the accuracy of PS, SBAS and IPTA results are evaluated by comparison with in-situ measurements from the GNSS network managed by INGV-OE and private operators considering different metrics. Experimental results show that in this case there is no preferred MT-InSAR technique in an absolute way but each of them has strengths and drawbacks that have to be taken into account in the monitoring of complex scenarios.
      10  39
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    High-resolution susceptibility mapping of seismically induced landslides on Ischia island: the 2017 earthquake case study

    (Springfield, MO : AIMS Press, [2015]-, 2024-08-01) ; ; ; ;
    Ischia island represents the westernmost portion of the Phlegraean Volcanic District (Campania Region, Italy) and is characterized by the presence of Mt. Epomeo, a giant centrally located resurgent volcanic horst. This horst is controlled by fault systems and magmatic dynamics able to generate recurrent seismicity. Such seismicity, associated with the presence of volcanic terrains with different degrees of erodibility, makes Ischia highly subjected to several ground instability phenomena such as landslides. This multidisciplinary study aimed to map the seismically induced landslide susceptibility of the island, taking into account the Md 4.0 earthquake that occurred on August 21, 2017, as a reference seismic event. Eight parameters were isolated as relevant predisposing factors for landslide occurrence and combined, through GIS elaborations, to compute a numerical index (SNAP index) that quantified the seismically induced landslide susceptibility for each 5 × 5 m area. The resulting map, through five classes of susceptibility, highlights that the highest exposed areas are mainly localized along the N-NW flanks of Mt. Epomeo, involving mainly the municipality of Casamicciola Terme. Moreover, the map is discussed considering the spatial 574
      11  72
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Insights into post-emplacement lava flow dynamics at Mt. Etna volcano from 2016 to 2021 by synthetic aperture radar and multispectral satellite data

    Post-emplacement dynamics of lava flows is governed by several factors such as poroelastic deformation of the substrate; gravity-induced repacking and rearrangement of the vesicle-bearing fluid lava and other void spaces by superposed flows; lava densification processes; viscoelastic strain relaxation of the ground caused by the lava load; thermal cooling and contraction of the solid lava; and discrete motion of surface blocks. Here we investigate postemplacement lava flow dynamics at the Mt. Etna volcano, and we infer on the possible causes by exploiting optical and radar satellite data. Synthetic aperture radar data from Sentinel-1 satellite mission provided high-resolution horizontal and vertical displacement rates and displacement time series of the lava flows emplaced on the Mt. Etna volcano summit from January 2016 to July 2021. Sentinel-2 multispectral data allowed to identify the lava flows boundaries emplaced during the December 2018 and May 2019 paroxysms. Finally, high resolution COSMO-SkyMed radar data allowed to account for the topographic changes generated by the lava emplacement by means of stereo radargrammetry technique. Such an unprecedented dataset provided a full picture of the lava flow dynamics, whose kinematics is governed lava cooling, which in turn produce thermal contraction of the lava body and viscous compaction of the underlying substrate. Both phenomena act at different periods, being the thermal contraction predominant for recent lava flows. Downslope sliding is also invoked, especially for recent lava flows emplaced on high slope areas.
      92  147
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    High-resolution mapping and dispersion analyses of volcanic ballistics emitted during the 3rd July 2019 paroxysm at Stromboli

    A detailed mapping of volcanic ballistic projectiles emplaced in a defined area, represents the starting point to derive preparatory data in hazard and risk studies of ballistics phenomena. Considering as case study the 3rd July 2019 paroxysmal eruption occurred at Stromboli volcano, we map and analyse at very high spatial resolution (8 cm) the distribution of the ballistic spatter clasts emplaced on the E flank of the volcano. The resulting map identifies and reproduces as geospatial polygon elements 152,228 spatter clasts with areal dimensions from 0.03 to 4.23 m2. Dispersed on 0.407 km2, the spatters cover an area of 29,000 m2 corresponding to an erupted products volume from 2.3 to 7.0 × 103 m3, calculated here for the first time. Spatial analyses indicate that the area mostly affected by the clasts emplacement is between N67.5 and N135 directions, identifying a preferential deposition between N112.50 and N123.75 directions. The clasts size distribution rapidly decreases with the size increase, highlighting a nearly constant ratio small/large clasts regardless the distance from the vent. Finally, additional investigations reveal that clasts dispersion parameters decrease progressively with the distance from the vent only along one direction (N67.5), highlighting how the morphology influences the deposition and remobilisation of mapped ballistics.
      105  102
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The set up of the “UNO” Project relational database for Stromboli volcano

    Active volcanoes are complex, poorly predictable systems that can pose a threat to humans and their infrastructures. As such, it is important to improve as much as possible the understanding of their behavior. The Stromboli volcano, in Italy, is one of the most active volcanoes in the world, and its almost persistent activity is documented since centuries. The persistent background activity is sometimes interrupted by much more energetic, dangerous episodes. The Istituto Nazionale di Geofisica e Vulcanologia (Italy) set up the interdisciplinary “UNO” project, aimed to understand when the Stromboli volcano is about to switch from the ordinary to the extraordinary activity. The UNO project includes an outstanding variety of research activities, such as sampling in the field, the modeling of Stromboli topography from ALS technique and satellite data, the 3D numerical simulations of ballistic trajectories, or the set up of an ultrasonic microphones system. Key to the success of the project is the collection of integrated high spatial and temporal resolution data and their joint analyses in a shared relational database. We present here the simplified logical model of such database, focusing on the identification of entities and their relationships.
      19  34
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Spatial and Temporal Analysis of Carbon Dioxide Concentrations over Italy by means of OCO‑2 Satellite Data Series

    Carbon dioxide is a greenhouse gas with sink and source related to natural cycles and anthropic activities. OCO‑2 is a NASA carbon dioxide dedicated mission launched in 2014 aimed to measure the CO2 concentrations in the atmosphere by recording sunlight reflected off the Earth and provides, at the state of the art, the highest spatial resolution for mapping CO2 at global scale. In this work, for the first time, we statistically analyse 8 years of OCO‑2 acquisitions over Italian territory, obtaining the main trend and the seasonal behaviour of CO2 over land. After data reprocessing and compensating on temporal frequency of OCO‑2 acquisitions over Italy, a mean of 21 ppm of increment in the period from 2015 to 2022 has been found. In the data time series, we also noticed a significant acceleration in the trend between 2019 and 2020 and a return to average values of the trend after the COVID19 pandemic lockdown. In addition, such trends have been compared with those achieved by the European Centre for Medium Range Weather Forecasts (ECMWF) model. The data time series was also used to perform a spatial analysis of areas characterized by lower/higherc CO2 concentrations to detect sinks/sources in Italy due to the land use. The analysis reveals that the North Italian regions, with more population and industries, are the source of CO2; moreover, the fundamental role of vegetation as a sink of CO2 is confirmed.
      71  63
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A Methodology for CO2 Retrieval Applied to Hyperspectral PRISMA Data

    The aim of this work is to develop and test a simple methodology for CO2 emission retrieval applied to hyperspectral PRISMA data. Model simulations are used to infer the best SWIR chan-nels for CO2 retrieval purposes, the weight coefficients for a Continuum Interpolated Band Ratio (CIBR) index calculation, and the factor for converting the CIBR values to XCO2 (ppm) estima-tions above the background. This method has been applied to two test cases relating to the LUSI volcanic area (Indonesia) and the Solfatara area in the caldera of Campi Flegrei (Italy). The re-sults show the capability of the method to detect and estimate CO2 emissions at a local spatial scale and the potential of PRISMA acquisitions for gas retrieval. The limits of the method are al-so evaluated and discussed, indicating a satisfactory application for medium/strong emissions and over soils with a reflectance greater than 0.1.
      306  239
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Ten years of volcanic activity at Mt Etna: High-resolution mapping and accurate quantification of the morphological changes by Pleiades and Lidar data

    The topography of Mt. Etna, Italy, is subjected to continuous modifications depending on intensity and magnitude of eruptions that frequently occur at the volcano summit and flanks. In order to make high-resolution maps of morphological changes and accurately calculate the overall volume of the erupted products (e.g., lava flows, tephra fall out, scoriae cones) in ten years, we have compared the altimetry models of Mt. Etna derived from 2005 Airborne Laser Scanning data and 2015 Pleiades stereo satellite imagery. Both models cover a common area of 400 km2 with spatial resolution of 2 m and comparable vertical accuracy (RMSE <0.8 m). The results show that the area most affected by the erupted products is the mid-upper portion of the volcano with an altitude ranging from 1300 m to more than 3300 m a.s.l., value reached at the summit of the North East crater. In particular, this portion changes dramatically in the eastern sector due to the birth and growth of the New South- East Crater, the invasion of dozens of lava flows in the Valle del Bove, and the formation of the 2014 scoriae cones and lava field at the base of the North-East Crater. The total volume of products erupted in the investigated period results in 284.3±15.8 x 106 m3 with a yearly average volume of 28.4 x 106 m3/y comparable with the previous decades. In addition, the products emitted by the 2014 sub-terminal eruption are mapped and quantified including, for the first time, the volume of the 2014 scoriae cones generated on the eastern flank of North- East Crater This study demonstrates how a rigorous comparison between digital elevation models derived from different remote sensing techniques produce high accurate mapping and quantifications of morphological changes applicable for worldwide active volcanoes. This allows to quantify volumes and areas of erupted products reducing the error estimations, a crucial point to provide precise data often used as key parameters for many volcanic hazard studies.
      535  179
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Water Vapor Tomography of the Lower Atmosphere from Multiparametric Inversion: the Mt. Etna Volcano Test Case

    Space techniques based on GPS and SAR interferometry allow measuringmillimetric ground deformations. Achieving such accuracy means removing atmospheric anomalies that frequently affect volcanic areas by modeling the tropospheric delays. Due to the prominent orography and the high spatial and temporal variability of weather conditions, the active volcano Mt. Etna (Italy) is particularly suitableto carry out research aimed at estimating and filtering atmospheric effects on GPS and DInSAR grounddeformation measurements. The aim of this work is to improve the accuracy of the ground deformation measurements by modeling the tropospheric delays at Mt. Etna volcano. To this end, data from the monitoring network of 29 GPS permanent stations and MODIS multispectral satellite data series are used to reproduce the tropospheric delays affecting interferograms. A tomography algorithm has been developed to reproduce the wet refractivityfield over Mt. Etna in 3D, starting from the slant tropospheric delays calculated by GPS in all the stations of the network. The developed algorithm has been tested on a synthetic atmospheric anomaly. The test confirms the capability of the software to faithfully reconstruct the simulated anomaly. With the aim of applying this algorithm to real cases, we introduce the water vapor contentmeasured by the MODIS instrument on board Terra and Aqua satellites. The use of such data,although limited by cloud cover, provides a two-fold benefit: it improves the tomographic resolution and adds feedback for the GPS wet delay measurements. A cross-comparison between GPS and MODIS water vapor measurements for thefirst time shows a fair agreement between those indirect measurements on an entire year of data (2015). The tomography algorithm was applied on selected real cases to correct the Sentinel-1 DInSAR interferograms acquired over Mt. Etna during 2015. Indeed, the corrected interferograms show that the differential path delay reaches 0.1 m (i.e. 3 C-band fringes) in ground deformation, demonstrating how the atmospheric anomaly affects precision and reliability of DInSAR space-based techniques. The real cases show that the tomography is often able to capturethe atmospheric effect at the large scale and correct interferograms, although in limited areas. Furthermore, the introduction of MODIS data significantly improves by ∼80% voxel resolution at the critical layer (1,000 m). Further improvements will be suitable for monitoring active volcanoes worldwide.
      307  148