Institut de Physique du Globe de Paris
9 results
Filters
Settings
The search returned 9 results
Now showing 1 - 9 of 9
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Validation of the IRI-2020 topside ionosphere options through in-situ electron density observations by low-Earth-orbit satellites
The topside ionosphere extends from the F2-layer peak, where the electron density reaches its absolute maximum in the ionosphere, to the overlying plasmasphere and magnetosphere. In the topside ionosphere, the electron density decreases with height with a vertical variation rate strongly dependent on height itself. The last version of the International Reference Ionosphere (IRI) model, i.e., IRI-2020, describes this complex behavior through four topside options based on different sub-models (i.e., options) developed from the 1970s to the present. All these options have in common the F2-layer peak as an anchor point, while they differ in their topside electron density profile and/or plasma effective scale height formulations. In this work, we perform a validation of the accuracy of the four IRI-2020 topside options based on the comparison against in-situ electron density observations by Gravity Recovery and Climate Experiment (GRACE), Ionospheric Connection Explorer (ICON), and Defense Meteorological Satellite Program (DMSP) F15 low-Earth-orbit satellites. Datasets used in this study encompass observations recorded from 1999 to 2022, covering different diurnal, seasonal, and solar activity conditions, on a global basis and for the height range 400–850 km above the ground. The nearly two solar cycles dataset facilitated the evaluation of IRI-2020 topside options ability to reproduce the spatial and time variations of the topside ionosphere for different solar activity conditions. The weaknesses and strengths of each IRI-2020 topside option are highlighted and discussed, and suggestions on how to improve the modeling of the challenging topside ionosphere region within the IRI model are provided for future reference.59 110 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Finite-difference P wave travel time seismic tomography of the crust and uppermost mantle in the Italian region
(2014-01); ; ; ;Gualtieri, L.; Institut de Physique du Globe de ParisSerretti, P.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Bologna, Bologna, ItaliaWe present a 3-D P wave velocity model of the crust and shallowest mantle under the Italian region, that includes a revised Moho depth map, obtained by regional seismic travel time tomography. We invert 191,850 Pn and Pg wave arrival times from 6850 earthquakes that occurred within the region from 1988 to 2007, recorded by 264 permanent seismic stations. We adopt a high-resolution linear B-spline model representation, with 0.1 horizontal and 2 km vertical grid spacing, and an accurate finite-difference forward calculation scheme. Our nonlinear iterative inversion process uses the recent European reference 3-D crustal model EPcrust as a priori information. Our resulting model shows two arcs of relatively low velocity in the crust running along both the Alps and the Apennines, underlying the collision belts between plates. Beneath the Western Alps we detect the presence of the Ivrea body, denoted by a strong high P wave velocity anomaly. We also map the Moho discontinuity resulting from the inversion, imaged as the relatively sharp transition between crust and mantle, where P wave velocity steps up to values larger than 8 km/s. This simple condition yields an image quite in agreement with previous studies that use explicit representations for the discontinuity. We find a complex lithospheric structure characterized by shallower Moho close by the Tyrrhenian Sea, intermediate depth along the Adriatic coast, and deepest Moho under the two mountain belts.308 24 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Volcanic SO2 fluxes derived from satellite data: a survey using OMI, GOME-2, IASI and MODIS
(2013); ; ; ; Sulphur dioxide (SO2)fluxes of active degassing volcanoes are routinely measured with ground-based equipment to characterize and monitor volcanic activity. SO2 of unmonitored volcanoes or from explosive volcanic eruptions, can be measured with satellites. However, remote-sensing methods based on absorption spectroscopy generally provide integrated amounts of already dispersed plumes of SO2 and satellite derived flux estimates are rarely reported. Here we review a number of different techniques to derive volcanic SO2 fluxes using satellite measurements of plumes of SO2 and investigate the temporal evolution of the total emissions of SO2 for three very different volcanic events in 2011: Puyehue-Cord on Caulle (Chile), Nyamulagira (DR Congo) and Nabro (Eritrea). High spectral resolution satellite instruments operating both in the ultravioletvisible (OMI/Aura and GOME-2/MetOp-A) and thermal infrared (IASI/MetOp-A) spectral ranges, and multispectral satellite instruments operating in the thermal infrared (MODIS/Terra-Aqua) are used. We show that satellite data can provide fluxes with a sampling of a day or less (few hours in the best case). Generally the flux results from the different methods are consistent, and we discuss the advantages and weaknesses of each technique. Although the primary objective of this study is the calculation of SO2 fluxes, it also enables us to assess the consistency of the SO2 products from the different sensors used.449 4910 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The Deep Sea and Sub-Seafloor Frontier
The deep sea and its sub-seafloor contain a vast reservoir of physical, mineral and biological resources that are rapidly coming into the window of exploitation. Assessing the opportunities and the risks involved requires a serious commitment to excellent deep sea research. There are numerous areas in this field in which Europe has cutting-edge technological potential. These include drilling and monitoring technology in the field of renewable energies such as geothermal, offshore wind and seafloor resources. Scientific ocean drilling will continue to play a valuable role, for example in the exploration of resource opportunities, in obtaining estimates for ecosystem and Earth climate sensitivity, or in improving understanding about the controlling factors governing processes and recurrence intervals of submarine geohazards. In Europe, there is also the scientific expertise needed to define a framework for policymakers for environmental protection measures and to carry out ecological impact assessments before, during and after commercial exploitation. Taking up these societal challenges will strengthen European scientific and educational networks and promote the development of world-class technology and industrial leadership.587 703 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , 5116 477 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Variations of crustal elastic properties during the 2009 L’Aquila earthquake inferred from cross correlations of ambient seismic noise
We retrieve seismic velocity variations within the Earth’s crust in the region of L’Aquila (central Italy) by analyzing cross␣correlations of more than two years of continuous seis- mic records. The studied period includes the April 6, 2009, Mw 6.1 L’Aquila earthquake. We observe a decrease of seis- mic velocities as a result of the earthquake’s main shock. After performing the analysis in different frequency bands between 0.1 and 1 Hz, we conclude that the velocity varia- tions are strongest at relatively high frequencies (0.5–1 Hz) suggesting that they are mostly related to the damage in the shallow soft layers resulting from the co␣seismic shaking320 39 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , A ten years analysis of deformation in the Corinthian Gulf via GPS and SAR Interferometry
The Corinthian Gulf in Greece, is the most active of a series of extending grabens which accomodate the deformation in the highly seismic Aegean region. The geodetic network established in the region has about 200 points: 50 1st order points and ~150 2nd order points. The network covers an area of about 100 x 80 km2, which correspond to an average density of 1 point every 5 km2. This dense network allows to study the main active faults in the region. Eleven field surveys were organized in 1990, 1991, 1992, 1993, 1994, June 1995, October 1995, 1997, and 2001. Two earthquakes occurred in the vicinity during the ten years period: the 1992, 18 November Ms=5.9 Galaxidi earthquake and the 1995, 15 June 1995 Ms=6.2 Aigion one. With respect to the stable Europe, we find for Peloponnessos an average displacement rate of 30 mm/yr in the N215° direction, similar to that found in previous studies. Our results show that most of the deformation in the Corinthian Gulf is localizes off-shore, in a narrow band, in the central part of the Gulf. The extension rate measured over 10 years is 11 mm/yr in the N185° direction in the middle of the Gulf (Xiloxastro) and 16 mm/yr in the N185° direction in its western part (Aigion). The southern block appears un-deformed, except the region of Aigion event. Using CNES DIAPASON software, we derived 85 interferograms of the Corinthian Gulf from 38 raw ERS SAR images acquired between 1992 and 1999. The interferograms sampling the 1995 earthquake show a clear coseismic signal reaching 250 +/- 15 mm at Psaromita cape, a value consistent with the GPS measurements. No post-seismic motion, within the error bars of SAR interferometry (+/- 15 mm), is observed during the 1995-1999 period.137 315 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , IMPROVEMENT OF THE TROPOSPHERIC CORRECTION BY ADAPTED PHASE FILTERING
Tropospheric inhomogeneities can form a major error source in DinSAR (Differential SAR Interferometry) measurements used in slow deformation monitoring. Previous studies introduced techniques to correct these artefacts. In [1] they propose to evaluate and correct tropospheric effects directly from raw differential interferograms by estimating the phase/altitude correlation. Since the wrapped phase noise in these interferograms influences the correction of tropospheric artefacts its removal is mandatory. In this paper, we aim to show that adapted wrapped phase filtering greatly improves the retrieval of tropospheric effects. The filtered interferograms are then used to model these artefacts. Filtered and unfiltered results are compared to quantify the improvement.192 340 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , INTERFÉROMÉTRIE RADAR APPLIQUÉE AUX VOLCANS : CAS DE L’ETNA ET DES CHAMPS PHLÉGRÉENS (ITALIE)
During the last few years, the radar images collected by the European satellites ERS1 and ERS2, the Japanese satellite JERS and the Canadian satellite RADARSAT have been used with success to create interferograms. This technique has been applied for geophysical applications like co-seismic deformation mapping, volcano deformation monitoring, landslides monitoring, mining subsidence detection, glaciers monitoring. Here we report the research carried out by our group on Etna volcano (Italy) and in the area of Naples (Italy) where are located several potentially active volcanoes (Vesuvius, Ischia) and where a subsidence of the caldera of Campi Flegrei is still on going in response to the 1982-1984 seismic crisis. Etna is the volcano that has been studied first using ERS SAR interferometry. Using this method, a large scale deflation of the volcano associated with the large 1991-1993 eruption was detected in data covering the second half of the eruption. Further studies showed that the local deformation fields located in Valle del Bove (East of the volcano) where associated with the compaction of the 1986-1987 and 1989 lava fields and also partly with a subsidence of the surrounding terrain in response to the load of the new deposited material. Other local deformation fields have been identified, corresponding to the 1983, 1981 and 1971 lava fields. However, due to its strong topography, interferograms of Etna are affected by tropospheric effects. Those effects must be eliminated in order to correctly interpret the fringes pattern. The problem of the troposphere has been first investigated from its theoretical point of view and using existing local meteorological data as well as radio-soundings data. Recently, thanks to the large amount of available interferograms, another approach has been investigated, consisting in the research of a correlation fringe/elevation in the interferograms themselves. This approach, operated either in automatic mode (automatic fringe unwrapping) or in manual mode proved to be efficient for most of the coherent interferograms. After removal of the tropospheric correction, the evolution of the deformation of the volcano at large scale between 1992 and 1998 has been inferred. The subsidence occurring during the second half of the 1992 eruption as well as the uplift preceding the 1995 unrest of the Southeast crater are visible, but their amplitude is less than previously estimated. The depth of the modelled source of subsidence/uplift related to the large scale deformation is of the order of 6 to 8 km, not well constrained by the data. The study of the correlation fringe/elevation was possible only after a detailed analysis of the spatial and temporal properties of coherence of the Etna area. Indeed, the technique of fringe unwrapping for fringe/elevation correlation analysis is possible only if the poorly coherent pixels are eliminated. A map of the most coherent pixels of the volcano was produced. The recent lava fields as well as the towns and villages surrounding the volcano are the most coherent areas. The quality of the interferograms is also enhanced when high accuracy DEM (Digital Elevation Model) are used. Using kinematic GPS data collected along more than 100 km of road around the volcano, we assessed the accuracy of several DEMs of Etna. The most accurate DEM was produced by digitising 1/25.000e maps of Etna. This DEM does not take into account the topographic changes due to the recent eruptions. Merging other more recent DEMs corresponding to those areas, we produced an updated relatively high accuracy DEM (±3 m) of Etna. In the Naples area, we analysed interferograms in the period 1993-1996 and show that the Campi Flegrei caldera is still subsiding at a rate of about 30 mm/year.264 729
