Pepe, Susi
23 results
Filters
Settings
The search returned 23 results
Now showing 1 - 10 of 23
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Geodetic model of the 2016 Central Italy earthquake sequence inferred from InSAR and GPS data
We investigate a large geodetic data set of interferometric synthetic aperture radar (InSAR) and GPS measurements to determine the source parameters for the three main shocks of the 2016 Central Italy earthquake sequence on 24 August and 26 and 30 October (Mw 6.1, 5.9, and 6.5,respectively). Our preferred model is consistent with the activation of four main coseismic asperities belonging to the SW dipping normal fault system associated with the Mount Gorzano-Mount Vettore-Mount Bove alignment. Additional slip, equivalent to aMw~ 6.1–6.2 earthquake, on a secondary (1) NE dipping antithetic fault and/or (2) on a WNW dipping low-angle fault in the hanging wall of the main system is required to better reproduce the complex deformation pattern associated with the greatest seismic event (the Mw 6.5 earthquake). The recognition of ancillary faults involved in the sequence suggests a complex interaction in the activated crustal volume between the main normal faults and the secondary structures and a partitioning of strain release.2452 473 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , RETRACE-3D project: a multidisciplinary collaboration to build a crustal model for the 2016-2018 central Italy seismic sequence
The RETRACE-3D project (centRal italy EarThquakes integRAted Crustal model) focused on the revision of all the available geological and geophysical data in the area interested by the 2016-2018 seismic sequence of central Italy, with the final aim to reconstruct a reliable and consistent 3D geological model of that area. It is based on a collaboration, which was framed into a formal agreement, between Dipartimento della Protezione Civile (the Italian Civil Protection Department), Istituto di Geologia Ambientale e Geoingegneria, and Istituto per il Rilevamento Elettromagnetico of the Consiglio Nazionale delle Ricerche, Istituto Nazionale di Geofisica e Vulcanologia, and Istituto Superiore per la Protezione e la Ricerca Ambientale. The agreement purpose was to develop a project aimed at the geological and seismotectonic characterisation of the crustal volume hosting that seismic sequence. We present and discuss the approach, methodology and results of the project. The 3D geological model of the study area is developed in detail down to a depth of about 12 km, and extended to the Moho based on available regional-scale information. The model is available on the RETRACE-3D project website (www.retrace3d.it).3102 360 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , How do volcanic rift zones relate to flank instability? Evidence from collapsing rifts at Etna
(2012-09-19); ; ; ; Volcanic rift zones, characterized by repeated dike emplacements, are expected to delimit the upper portion of unstable flanks at basaltic edifices. We use nearly two decades of InSAR observations excluding wintertime acquisitions, to analyze the relationships between rift zones, dike emplacement and flank instability at Etna. The results highlight a general eastward shift of the volcano summit, including the northeast and south rifts. This steadystate eastward movement (1-2 cm/yr) is interrupted or even reversed during transient dike injections. Detailed analysis of the northeast rift shows that only during phases of dike injection, as in 2002, does the rift transiently becomes the upper border of the unstable flank. The flank's steady-state eastward movement is inferred to result from the interplay between magmatic activity, asymmetric topographic unbuttressing, and east-dipping detachment geometry at its base. This study documents the first evidence of steady-state volcano rift instability interrupted by transient dike injection at basaltic edifices.402 58 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Capturing the fingerprint of Etna volcano activity in gravity and satellite radar data
(2013-10-30); ; ; ; Long-term and high temporal resolution gravity and deformation data move us toward a better understanding of the behavior of Mt Etna during the June 1995 – December 2011 period in which the volcano exhibited magma charging phases, flank eruptions and summit crater activity. Monthly repeated gravity measurements were coupled with deformation time series using the Differential Synthetic Aperture Radar Interferometry (DInSAR) technique on two sequences of interferograms from ERS/ENVISAT and COSMO-SkyMed satellites. Combining spatiotemporal gravity and DInSAR observations provides the signature of three underlying processes at Etna: (i) magma accumulation in intermediate storage zones, (ii) magmatic intrusions at shallow depth in the South Rift area, and (iii) the seaward sliding of the volcano’s eastern flank. Here we demonstrate the strength of the complementary gravity and DInSAR analysis in discerning among different processes and, thus, in detecting deep magma uprising in months to years before the onset of a new Etna eruption.454 24 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The 21 August 2017 Ischia (Italy) Earthquake Source Model Inferred From Seismological, GPS, and DInSAR Measurements
The causative source of the first damaging earthquake instrumentally recorded in the Island of Ischia, occurred on 21 August 2017, has been studied through a multiparametric geophysical approach. In order to investigate the source geometry and kinematics we exploit seismological, Global Positioning System, and Sentinel-1 and COSMO-SkyMed differential interferometric synthetic aperture radar coseismic measurements. Our results indicate that the retrieved solutions from the geodetic data modeling and the seismological data are plausible; in particular, the best fit solution consists of an E-W striking, south dipping normal fault, with its center located at a depth of 800 m. Moreover, the retrieved causative fault is consistent with the rheological stratification of the crust in this zone. This study allows us to improve the knowledge of the volcano-tectonic processes occurring on the Island, which is crucial for a better assessment of the seismic risk in the area.1118 239 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , The 2004–2006 uplift episode at Campi Flegrei caldera (Italy): Constraints from SBAS-DInSAR ENVISAT data and Bayesian source inference
(2008-04-12); ; ; ; We investigate the 2004–2006 uplift phase of Campi Flegrei caldera (Italy) by exploiting the archive of ascending and descending ENVISAT SAR data acquired from November 2002 to November 2006. The SBAS-DInSAR technique is applied to generate displacement mean velocity maps and time series. An appropriate post-processing step is subsequently applied to map the areas whose temporal deformation behavior is correlated with that of the maximum uplift zone. Our results show that the deformation also extends outside the volcanological limits of the Neapolitan Yellow Tuff caldera, without significant discontinuities. The DInSAR data are inverted by considering a finite spheroid and an isotropic pointsource. The inversion results suggest that the new uplift is characterized by a source location similar to the previous small uplift event of 2000 and to the long term subsidence of the 1990’s. In particular, the source is located at a depth of about 3.2 km and very close to the city of Pozzuoli (about 800 m offshore, to the SW); the associated volume variation is about 1.1 106 m3/year.368 37 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Deformation and eruptions at Mt. Etna (Italy): A lesson from 15 years of observations
(2009-01-28); ; ; ; Volcanoes deform as a consequence of the rise and storage of magma; once magma reaches a critical pressure, an eruption occurs. However, how the edifice deformation relates to its eruptive behavior is poorly known. Here, we produce a joint interpretation of spaceborne InSAR deformation measurements and volcanic activity at Mt. Etna (Italy), between 1992 and 2006. We distinguish two volcano-tectonic behaviors. Between 1993 and 2000, Etna inflated with a starting deformation rate of 1 cm yr 1 that progressively reduced with time, nearly vanishing between 1998 and 2000; moreover, low-eruptive rate summit eruptions occurred, punctuated by lava fountains. Between 2001 and 2005, Etna deflated, feeding higher-eruptive rate flank eruptions, along with large displacements of the entire East-flank. These two behaviors, we suggest, result from the higher rate of magma stored between 1993 and June 2001, which triggered the emplacement of the dike responsible for the 2001 and 2002–2003 eruptions. Our results clearly show that the joint interpretation of volcano deformation and stored magma rates may be crucial in identifying impending volcanic eruptions.308 151 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Volcanic structures investigation through SAR and seismic interferometric methods: The 2011–2013 Campi Flegrei unrest episode
(2019); ; ; ; Observations from satellites provide high-resolution images of ground deformation allowing to infer deformation sources by developing advanced modeling of magma ascent and intrusion processes. Nevertheless, such models can be strongly biased without a precise model of the internal structure of the volcano. In this study, we jointly exploited two interferometric techniques to interpret the 2011–2013 unrest at Campi Flegrei caldera (CFc). The first is the Interferometric Synthetic Aperture Radar (InSAR) technique, which provides highly-resolved spatial and temporal images of ground deformation. The second is the Ambient Noise Tomography (ANT), which images subsurface structures, providing the constraints necessary to infer the depth of the shallow source at CFc (between 0.8 and 1.2 km). We applied for the first time a tool to delineate the deformation source boundaries from the observed deformation maps: the Total Horizontal Derivative (THD) technique. The THD processes the vertical component of the ground deformation field detected through InSAR applied to COSMO-SkyMed data. The patterns retrieved by applying the THD technique show consistent spatial correlations with (1) the seismic group-velocity maps achieved through the ANT and (2) the distribution of the earthquakes nucleated during the unrest at ~1 km. High-velocity anomalies, the retrieved geometrical features of the deformation field, and the spatial distribution of seismicity coincide with extinct volcanic vents in the eastern part of the caldera (Solfatara/ Pisciarelli and Astroni). Such a coincidence hints at a significant role of the extinct plumbing system in either constraining or channeling the eastward propagation of magmatic fluids. Here, we demonstrated that a joint analysis of the InSAR patterns, seismic structures, and seismicity allows us to model in space and time the characteristics and nature of the shallow deformation source at CFc. Using published literature, we show that the effects of structural heterogeneities at shallow depths may have a more significant early-stage impact on the evolution of the surface displacement signals than deeper magmatic sources: these secondary structural effects may produce local amplification in the deformation records which can be mistakenly interpreted as early signals of impending eruptions. The achieved results are particularly relevant for the understanding of the origin of deformation signal at volcanoes where magma propagation within sills is expected, as at CFc.404 155 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , A QUANTITATIVE ASSESSMENT OF DInSAR TIME SERIES ACCURACY IN VOLCANIC AREAS: FROM THE FIRST TO SECOND GENERATION SAR SENSORS
We perform a quantitative assessment of the accuracy of Differential SAR Interferometry (DInSAR) time series in volcanic areas, retrieved through “first” and “second generation” SAR data. In particular, we analyze the impact that the wavelengths and looking geometries may have in the DInSAR measurement retrieval depending on the radar system. To this aim, we focus on the DInSAR algorithm referred to as Small BAseline Subset (SBAS) to generate mean deformation velocity maps and corresponding time series starting from sequences of SAR images. Moreover, we consider collections of SAR data acquired by the ERS-1/2 and ENVISAT (C-band), and COSMO-SkyMed (Xband) sensors over the volcanic area of the Campi Flegrei caldera, Southern Italy. We invert these SAR data sequences through the SBAS-DInSAR technique, thus obtaining C- and X- band deformation time series that we compare to continuous GPS measurements, the latter assumed as reference. The achieved results provide, in addition to a clear picture of the surface deformation phenomena already occurred and occurring in the selected case study, relevant indications for the analysis of the SBAS-DInSAR time series accuracies in volcanic areas passing from the first to second generation SAR sensors.181 16 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , FIFTEEN YEARS OF ERS AND ENVISAT DInSAR OBSERVATIONS AT MT. ETNA (ITALY) BY USING THE SBAS APPROACH
(2007-11-26); ; ; ; We exploited the Small BAseline Subset (SBAS) technique and computed ground displacement maps and time series by inverting 283 interferograms generated from the ascending and 289 from the descending orbits to reveal Mt. Etna surface deformation from 1992 to 2006. Our analysis shows that the volcano experienced magmatic inflation/deflation and radial spreading of the west, south and east flanks. In particular, the summit area vertical deformation inverted its sign after 2000 and clearly shows a deflation effect related to the 2001 and 2002 eruptive and seismic events. On the contrary, the horizontal signals revealed on the eastern and western flanks present significant and consistent motions toward east and west, respectively, during the investigated interval. Overall, the presented results show the complex and articulated deformation behavior of Mt. Etna and remark the possible coexistence of both gravity and magma forcing.205 756
