Menghini, Antonio
5 results
Settings
The search returned 5 results
Now showing 1 - 5 of 5
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , ElectroMagnetic Music: a new tool for attracting people's interest in Geosciences, while sensitizing them to planet sustainability
In recent years, different sonification methods used to organize scientific work have come out of the scientific realm and crossed into other areas for purposes other than those pursued strictly by scientific research. ElectroMagnetic Music (EMusic), a project born in Italy, fits fully into this area. By transforming into musical pitches the voltage response collected by the transient electromagnetic method (TEM), a well-known geophysical tool for subsurface exploration, this novel approach enables us to extract musical pieces reflecting the geological setting and to provide a soundtrack (i.e. the soundscape or the audio component of a landscape). The soundscape becomes the basis from which a dedicated band improvises jazz music. Besides being a new method for creating music, the project not only has the ambitious goal of attracting people to Earth sciences and their investigative methods but also of raising awareness of the environmental problems that characterize geological sites through the music. In this work, we explore the EMusic experiences gained as a live band travelling around the world. We also report some preliminary data on people's reactions and anticipate some future plans to better assess the potential of the method as a good science communication tool.243 54 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Five years of Earth sciences and art at the EGU (2015–2019)
(Geoscience Communication European Geosciences Union, 2020); ; ; ; It is becoming increasingly evident that both the scientific and artistic communities have a shared interest and responsibility in raising awareness of the limits to our planetary boundaries and the fragile stability and resilience of our Earth system. In the past, this issue was addressed mostly through traditional educational methods. However, there is mounting evidence that science–art collaborations can play a pivotal and vital role in this context by co-creating new ways of research and by stimulating the discussion by providing an emotional and human context through the arts. In 5 years of sessions at the EGU General Assembly (2015–2019) dedicated to the Earth sciences and art, we have witnessed geosciences being successfully presented through music, visual art, photography, theatre, literature, and digital art, where the artists explored new practices and methods in their work with scientists but also where scientists have been inspired by artists in their research, and finally truly trans-disciplinary co-creation of Sci-Art work has emerged. The present SI collects these works with the intent, on the one hand, of not dispensing with precious experiences. On the other hand, it cultivates the ambition to contribute to the restoration of a culture where both scientific and humanistic disciplines can contribute to the spread of a deeper knowledge of the Earth on the part of all, re-awakening, at the same time, a sense of beauty and responsibility for the planet.90 94 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Examples of Improved Inversion of Different Airborne Electromagnetic Datasets Via Sharp Regularization
Large geophysical datasets are produced routinely during airborne surveys. The Spatially Constrained Inversion (SCI) is capable of inverting these datasets in an efficient and effective way by using a 1D forward modeling and, at the same time, enforcing smoothness constraints between the model parameters. The smoothness constraints act both vertically within each 1D model discretizing the investigated volume and laterally between the adjacent soundings. Even if the traditional, smooth SCI has been proven to be very successful in reconstructing complex structures, sometimes it generates results where the formation boundaries are blurred and poorly match the real, abrupt changes in the underlying geology. Recently, to overcome this problem, the original (smooth) SCI algorithm has been extended to include sharp boundary reconstruction capabilities based on the Minimum Support regularization. By means of minimization of the volume where, the spatial model variation is non-vanishing (i.e., the support of the variation), sharp-SCI promotes the reconstruction of blocky solutions. In this paper, we apply the novel sharp-SCI method to different types of airborne electromagnetic datasets and, by comparing the models against other geophysical and geological evidences, demonstrate the improved capabilities of in reconstructing sharp features.226 1269 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The Italian reference site for TEM methods
The success of a long term transient electromagnetic survey (TEM) rigorously calls for appropriate system calibration, in addition to advanced processing and inversion of the measured data. In fact, acquisition of TEM data can be affected by a variety of noise sources from both inside and outside the system, making it difficult, for example, to define an absolute turn off time and/or to synchronize transmitter and receiver. For these reasons, a reference site plays an important role. As first step, we performed the calibration of a Geonics 47 at the Lyngby reference site in Denmark. We then set up a new reference site using the same calibrated TEM instrument. The reference site was established in the San Rossore park area (Pisa), where we identified an area that matches the required conditions. Subsequently, a series of TEM measurements were collected in the selected area using two pre-calibrated TEM instruments: the Geonics 47 and the WalkTEM respectively. The reference responses were therefore jointly inverted, obtaining a 5 layers model that was appointed to be the TEM reference model for the site. Afterwards, based on that reference model, we calibrated the Geonics 47 and 57 instruments for a 100 × 100 m central loop configuration. A unique time-shift and a data level shift factor was calculated and applied to the TEM system as result of the calibration procedure. The San Rossore TEM reference site is now available for anyone interested in calibrating TEM systems.195 311 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Electrical tomography and TDEM prospection in the Chianciano thermal basin (Siena, Italy)
(2003); ; ; ;Pagano, G.; Studio di Tecnologie per la Geologia e l Ambiente (S.Te.G.A.), Viterbo, ItalyMenghini, A.; Studio di Tecnologie per la Geologia e l Ambiente (S.Te.G.A.), Viterbo, ItalyChianciano thermal basin in Tuscany belongs to a great structure that extends, from San Casciano Bagni to Rapolano, orientated SSE-NNW. Several springs are located in this thermal field: Acqua Santa, Macerina, Casuccini and Sillene well. They are located close to the contact between the lower complex of the «Tuscan series» (Triassic limestones and dolomites) and Pliocene formations (sands and clayey sands, clays and silty clays). According to the groundwater flow scheme, the former formations represent the geothermal reservoir and, where they outcrop, the recharge areas. Thermalized fluids rise through direct faults, having an apennine orientation. In order to locate a new production well, electrical tomography and TDEM prospection were performed. Geophysical interpretation led to the construction of 1D imaged and 2D sections showing the main tectonic features. The different electrical behaviour of the hydrogeological units disclosed a fault located near the old Sillene well; this tectonic feature caused the uplifting of Triassic formations towards the north-east. A new production well was located close to the fault in the uplifted sector with excellent results as it captured the thermal aquifer at a depth of 30 m with a discharge up to 70 l/s.196 603
