Saraò, Angela
Preferred name
Saraò, Angela
Main Affiliation
ORCID
22 results
Filters
Settings
The search returned 22 results
Now showing 1 - 10 of 22
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , The dynamics of the 2001 Etna eruption as seen by full moment tensor analysis
(2010-05); ; ; ; Saraò, A.; Istituto Nazionale di Oceanografia e di Geofisica Sperimentale, Centro Richerche Sismologiche, Trieste, Italy.The Mt. Etna eruption of July 2001 was announced by severe seismic activity and by the opening of a 7-km-long zone of densely distributed fractures. The large amount of data collected gave a unique opportunity to study the magma migration process and to infer the position and geometry of the uprising dyke. Results from multidisciplinary approaches suggest that the observed phenomenology was the result of the rapid intrusion of a vertical dyke, oriented roughly N–S and located a few km south of the summit region. To add new constraints to the dynamics of the eruption process, in this study we determine the full seismic moment tensors of 61 earthquakes, selected among those occurring between July 12 and July 18 (Md ≥ 2.2), located in a depth ranging from 1 km above sea level (a.s.l.) to 3 km below sea level (b.s.l.). At the beginning of the seismic swarm, the dominant component of the seismic source tensor is double-couple percentage (around 65 per cent on average) statistical significant at 95 per cent confidence level and in the following hours the non-double-couple components increase at the expenses of the double-couple. Such observations are related well with the system of fractures formed just before the eruption, whereas the increasing non-double-couple components can be explained as the response of the confining rocks to the rising magma and degassing processes. The type of focal mechanisms retrieved are predominantly of normal fault type (44 per cent), strike slip (30 per cent) and thrust mechanisms (9 per cent), and outline a scenario that concurs with the stress regime induced by a dyke injection. The space–time analysis of seismic source locations and source moment tensors (1) confirms the evidence of a vertical dyke emplacement that fed the 2001 lateral eruption and (2) adds new insights to support the hypothesis of the injection of a second aborted dyke, 2 km SE from the fractures zone.379 45 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Esperienze di gestione degli Open Data negli enti pubblici di ricerca
Il panorama degli EPR mostra una situazione variegata e in veloce evoluzione per quanto riguarda la gestione e la diffusione dei dati scientifici. Sono ancora pochi gli enti che si sono dotati di regolamenti sull’apertura del dato e di strumenti di gestione codificati che aiutino i ricercatori a districarsi nelle regole sempre più stringenti su questo aspetto. Diverse sono anche le tipologie di dati trattate dagli EPR, dati della ricerca, dati dinamici, dati di elevato valore, tutti dati che, frequentemente, hanno anche una rilevanza strategica nazionale e diversi sono quindi i trattamenti e le normative che li governano. Emergono chiare nei vari EPR le preoccupazioni dei ricercatori sul come districarsi per attuare l’apertura del dato in assenza di figure interne di supporto, o su come conciliare alcuni aspetti con le vigenti regole di valutazione che non tengono in considerazione i dati prodotti o l’attività gestione del dato. E’ necessario quindi che si definiscano al più presto in ogni EPR Le Politiche dei Dati, perché forniscono indicazioni sulle procedure da seguire per pubblicare i dati, procedure che sono adattate alla propria struttura organizzativa chiamata a dotarsi di nuove professionalità con competenze specifiche. Inoltre, una Politica dei Dati deve identificare un soggetto attuatore interno di riferimento e prevedere altresì strumenti gestionali che consentano una migliore programmazione delle attività. La presentazione fornirà una breve panoramica delle esperienze maturate in questi anni negli EPR, evidenziando alcune utili soluzioni adottate, le criticità legate alla mancata valutazione dei dati, e alcune specificità che differenziano enti vigilati e non vigilati dal MUR e alcune differenze con le Università.72 56 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Shear-Wave Velocity Models and Seismic Sources in Campanian volcanic areas:Vesuvio and Campi Flegrei
(2006); ; ; ; This chapter summarizes a comparative study of shear-wave velocity models and seismic sources in the Campanian volcanic areas of Vesuvius and Phlegraean Fields. These velocity models were obtained through the nonlinear inversion of surfacewave tomography data, using as a priori constraints the relevant information available in the literature. Local group velocity data were obtained by means of the frequency–time analysis for the time period between 0.3 and 2 s and were combined with the group velocity data for the time period between 10 and 35 s from the regional events located in the Italian peninsula and bordering areas and two station phase velocity data corresponding to the time period between 25 and 100 s. In order to invert Rayleigh wave dispersion curves, we applied the nonlinear inversion method called hedgehog and retrieved average models for the first 30–35km of the lithosphere, with the lower part of the upper mantle being kept fixed on the basis of existing regional models. A feature that is common to the two volcanic areas is a low shear velocity layer which is centered at the depth of about 10 km, while on the outside of the cone and along a path in the northeastern part of the Vesuvius area this layer is absent. This low velocity can be associated with the presence of partial melting and, therefore, may represent a quite diffused crustal magma reservoir which is fed by a deeper one that is regional in character and located in the uppermost mantle. The study of seismic source in terms of the moment tensor is suitable for an investigation of physical processes within a volcano; indeed, its components, double couple, compensated linear vector dipole, and volumetric, can be related to the movements of magma and fluids within the volcanic system. Although for many recent earthquake events the percentage of double couple component is high, our results also show the presence of significant non-double couple components in both volcanic areas.159 30 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Ground-motion simulations within ShakeMap methodology: application to the 2008 Iwate-Miyagi Nairiku (Japan) and 1980 Irpinia (Italy) earthquakes
(2013); ; ; ; ShakeMap package uses empirical Ground Motion Prediction Equations (GMPEs) to estimate the ground motion where recorded data are not available. Recorded and estimated values are then interpolated in order to produce a shaking map associated with the seismic event of interest. The ShakeMap approach better works in regions with dense stations coverage, where the observed ground motions adequately constrain the interpolation. In poorly instrumented regions, the ground motion estimate mainly relies on the GMPE, that account only for average characteristics of source and wave propagation processes. In this study we investigated the improvement of ShakeMap in the near fault area when including synthetic estimates. We focus on the 2008, Mw 7.0, Iwate-Miyagi Nairiku (Japan) earthquake as a case study because recorded by a huge number of stations. As first we calculated the shakemaps to be used as reference maps and then removed several subsets of stations from the original data-set, replacing them with: (i) the estimations of the ground motion obtained by using a specific GMPE valid for that area, using simple source information such as the earthquake magnitude and fault geometry; (ii) the peak values from synthetic time-histories computed with a hybrid deterministic-stochastic method for extended fault, using the rupture fault model obtained from the kinematic source inversion of strong-motion records. We evaluate the deviations from the reference map and the sensitivity to the number of sites where recordings are not available. Our results show that shakemaps are more and more reliable as the coverage of stations is dense and uniformly distributed in the near-source area. Moreover, the synthetics account for propagation and source properties in a more correct way than GMPE, and largely improve the results. The hybrid maps reach good fitting levels especially when synthetics are used to integrate real data and for particular strong-motion parameters and stations’ distribution.326 639 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Testing the improvement of ShakeMaps using f inite-f ault models and synthetic seismograms
(2010-09-06); ; ; ; ShakeMap package uses empirical ground motion prediction equations (GM PEs) to estimate the ground motion where recorded data are not available. Recorded and estimated values are then interpolated in order to produce a shaking map associated to the considered event. Anyway GMPEs account only for average characteristics of source and wave propagation processes. Within the framework of the DPC-INGV S3 project (2007-09), we evaluate whether the inclusion of directivity effects in GMPEs (companion paper Spagnuolo et al., 2010) or the use of synthetic seismograms from finite-fault rupture models may improve the ShakeMap evaluation. An advantage of using simulated motions from kinematic rupture models is that source effects, as rupture directivity, are directly included in the synthetics. This is particularly interesting in Italy where the regional GMPEs, based on a few number of near-source records for moderate-to-large earthquakes, are not reliable for estimating ground motion in the vicinity of the source. In this work we investigated how and if the synthetic seismograms generated with finite-fault models can be used in place of (or in addition to) GMPEs within the ShakeMap methodology. We assumed a description of the rupture model with gradually increasing details, from a simple point source to a kinematic rupture history obtained from inversion of strong-motion data. According to the available information synthetic seismograms are calculated with methods that account for the different degree of approximation in source properties. We chose the M w 6.9 2008 Iwate-M iyagi (Japan) earthquake as a case study. This earthquake has been recorded by a very large number of stations and the corresponding ShakeMap relies almost totally on the recorded ground motions. Starting from this ideal case, we removed a number of stations in order to evaluate the deviations from the reference map and the sensitivity of the map to the number of stations used. The removed data are then substituted with synthetic values calculated assuming different source approximations, and the resulting maps are compared to the original ones (containing observed data only). The use of synthetic seismograms computed for finite-fault rupture models produces, in general, an improvement of the calculated ShakeMaps, especially when synthetics are used to integrate real data. When real data are not available and ShakeMap is estimated using GMPEs only, the improvement adding simulated values depends on the considered strong-motion parameters.154 207 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , 2014 state-of-the-art of the OGS Northeastern Italy Seismic Network
(2014-08-24); ; ; ; The Centro di Ricerche Sismologiche (CRS, Seismological Research Centre) of the Istituto Nazionale di Oceanografia e di Geofisica Sperimentale (OGS, Italian National Institute for Oceanography and Experimental Geophysics) in Udine (Italy) after the strong earthquake of magnitude M=6.4 occurred in 1976 in the Italian Friuli-Venezia Giulia region, started to operate the North-eastern Italy Seismic Network: it currently consists of 18 very sensitive broad band and 20 simpler short period seismic stations, most of them equipped also with strong motion accelerometers, all tele-metered to and acquired in real time at the OGS-CRS data centre in Udine. Real time data exchange agreements in place with other Italian, Slovenian, Austrian and Swiss seismological institutes lead to a total number of about 100 seismic stations acquired in real time, which makes the OGS the reference institute for seismic monitoring of North-eastern Italy (Priolo et al., 2005, Bragato et al., 2011, Bragato et al., 2013, Saraò et al., 2010 and Pesaresi et al., 2011). Recent developments in running the OGS Northeastern Italy Seismic Network will be here illustrated.384 249 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Data mining from Antelope at OGS-CRS (Udine, Italy)
(2009-06-10); ; ; ; Since 2002 the Seismological Research Centre (Centro di Ricerche Sismologiche, CRS, http://www.crs.inogs.it) of the National Institute for Oceanography and Experimental Geophysics (OGS) in Trieste (Italy) is involved in the EU INTERREG IIIA project “Trans-national seismological networks in the South-Eastern Alps” together with other four Institutions: Zentralanstalt für Meteorologie und Geodynamik (ZAMG) in Vienna (Austria), the Earth Science Department of the Trieste University in Trieste (Italy) and the Agencija Republike Slovenije Za Okolje (ARSO) in Ljubljana (Slovenia). The commercial Antelope software suite from BRTT has been chosen as the common basis for real time data exchange, rapid location of earthquakes and alerting. Antelope is a powerful software suite that easily allows sharing data in real time among neighbouring institutions. However it must be tuned to each seismological data centre needs in order to extract the specific information required. At OGS-CRS we adapted existing programs and created new ones like: a customized interface to manually relocate earthquakes, a script for automatic moment tensor determination, scripts for web publishing of earthquake locations, waveforms, state of health parameters and shaking maps, plus scripts for email/SMS/fax alerting.312 499 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Improving the seismic monitoring of North-eastern Italy: the state of the art of the North-eastern Italy (NI) Seismic Network run by OGS
The Centro di Ricerche Sismologiche (CRS, Seismological Research Center) of the Istituto Nazionale di Oceanografia e di Geofisica Sperimentale (OGS, Italian National Institute for Oceanography and Experimental Geophysics) in Udine (Italy) after the strong earthquake of magnitude Mw=6.4 occurred in 1976 in the Italian Friuli-Venezia Giulia region, started to operate the North-eastern Italy (NI) Seismic Network: it currently consists of 12 very sensitive broad band and 21 simpler short period seismic stations, all telemetered to and acquired in real time at the OGS-CRS data center in Udine. Real time data exchange agreements in place with other Italian, Slovenian, Austrian and Swiss seismological institutes lead to a total number of 93 seismic stations acquired in real time, which makes the OGS the reference institute for seismic monitoring of North-eastern Italy. Since 2002 OGS-CRS is using the Antelope software suite on a SUN SPARC cluster as the main tool for collecting, analyzing, archiving and exchanging seismic data, initially in the framework of the EU Interreg IIIA project “Trans-national seismological networks in the South-Eastern Alps”. SeisComP is also used as a real time data exchange server tool. In order to improve the seismological monitoring of the North-eastern Italy area, at OGS-CRS we tuned existing programs and created ad hoc ones like: a customized web server named PickServer to manually relocate earthquakes, a script for automatic moment tensor determination, scripts for web publishing of earthquake parametric data, waveforms, state of health parameters and shaking maps, noise characterization by means of automatic spectra analysis, and last but not least scripts for email/SMS/fax alerting. A new OGS-CRS real time seismological website (http://rts.crs.inogs.it/) has also been operative since more than one year in the framework of the Italian DPC-INGV S3 Project: the website shows classic earthquake locations parametric data plus shakemap and moment tensor information; recently also daily PSD quality check of seismic stations plots have been added. At OGS-CRS we also spent a considerable amount of efforts in improving the long-period performances of broadband seismic stations, either by carrying out full re-installations and/or applying thermal insulations to the seismometers: the example of the new PRED broad band seismic station installation in the cave tunnel of Cave del Predil using a Quanterra Q330HR high resolution digitizer and a Sterckeisen STS-2 broadband seismometer will be illustrated. Efforts have been put also in strengthening the reliability of data links, exploring the use of redundant satellite/radio/GPRS links.133 119 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Three Decades of Seismic Activity at Mt. Vesuvius: 1972–2000
(2004); ; ; ; We analyse the seismic catalogue of the local earthquakes which occurred at Somma-Vesuvius volcano in the past three decades (1972–2000). The seismicity in this period can be described ascomposed of a background level, characterised by a low and rather uniform rate of energy release and by sporadic periods of increased seismic activity. Such relatively intense seismicity periods are characterised by energy rates and magnitudes progressively increasing in the critical periods. The analysis of the b value in the whole period evidences a well-defined pattern, with values of b progressively decreasing, from about 1.8 at the beginning of the considered period, to about 1.0 at present. This steady variation indicates an increasing dynamics in the volcanic system. Within this general trend it is possible to identify a substructure in the time sequence of the seismic events, formed by the alternating episodes of quiescence and activity. The analysis of the source moment tensor of the largest earthquakes shows that the processes at the seismic source are generally not consistent with simple double-couples, but that they are compatible with isotropic components, mostly indicating volumetric expansion. These components are shown to be statistically significant for most of the analysed events. Such focal mechanisms can be interpreted as the effect of explosion phenomena, possibly related to volatile exsolution from the crystallising magma. The availability of a reduced amount of high quality data necessary for the inversion of the source moment tensor, the still limited period of systematic observation of Vesuvius micro-earthquakes and, above all, the absence of eruptive events during such interval of time, cannot obviously permit the outlining of any formal premonitory signal. Nevertheless, the analysis reported in this paper indicates a progressively evolving dynamics, characterised by a generally increasing trend in the seismic activity in the volcanic system and by a significant volumetric component of recent major events, thus posing serious concern for a future evolution towards eruptive activity.199 97 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Moment magnitude for earthquakes in the Etna volcano area
Accurate quantification of seismic activity in volcanic regions is an important asset for im- proving hazard and risk assessment. This is especially true for densely populated areas, as in the case of Etna volcano (Southern Italy). There, the volcanic hazard is amplified by the seismic risk of acti ve faults, especiall y on the eastern flank of the volcano. In such a context, it is common to rely on moment magnitude ( M W ) to characterize seismicity and monitor the energy released during an eruption. In this study, we calculate the moment-based magnitude ( M W ) for selected seismic data sets, using different approaches in distinct magnitude ranges to cover the widest possible range of magnitude that characterizes Etna’s seismicity . Specifically , we computed the M W from a data set of moment tensor solutions of earthquakes that occurred in the magnitude range 3.4 ≤M L ≤4.8 during 2005–2020; we created a data set of seismic moment and associated M W for earthquakes 1.0 ≤M L < 3.4 obtained by analysing source spectra; we fine-tuned two relationships, for shallow and deep earthquakes, to obtain M W from response spectra. Finally, we calibrated a specific relationship between M W and M L for the Etna area earthquakes in the range 1.0 ≤M L ≤4.8. All the empirical relationships obtained in this study can be applied in real-time analysis of the seismicity to provide fast and robust information on the released seismic energy.45 115
