Beverini, Nicolò
Preferred name
Beverini, Nicolò
Main Affiliation
ORCID
27 results
Filters
Settings
The search returned 27 results
Now showing 1 - 10 of 27
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Status of the GINGER project
Large frame ring laser gyroscopes, based on the Sagnac effect, are top sensitivity instrumentation to measure angular velocity with respect to the fixed stars. GINGER (Gyroscopes IN GEneral Relativity) project foresees the construction of an array of three large dimension ring laser gyroscopes, rigidly connected to the Earth. GINGER has the potentiality to measure general relativity effects and Lorentz Violation in the gravity sector, once a sensitivity of 10 9, or better, of the Earth rotation rate is obtained. Being attached to the Earth crust, the array will also provide useful data for geophysical investigation. For this purpose, it is at present under construction as part of the multi-components observatory called Underground Geophysics at Gran Sasso (UGSS). Sensitivity is the key point to determine the relevance of this instrument for fundamental science. The most recent progress in the sensitivity measurement, obtained on a ring laser prototype called GINGERINO, indicates that GINGER should reach the level of 1 part in 1011 of the Earth rotation rate.45 108 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Ginger
In this paper, we outline the scientific objectives, the experimental layout, and the collaborations envisaged for the GINGER (Gyroscopes IN GEneral Relativity) project. The GINGER project brings together different scientific disciplines aiming at building an array of Ring Laser Gyroscopes (RLGs), exploiting the Sagnac effect, to measure continuously, with sensitivity better than picorad/s, large bandwidth (ca. 1 kHz), and high dynamic range, the absolute angular rotation rate of the Earth. In the paper, we address the feasibility of the apparatus with respect to the ambitious specifications above, as well as prove how such an apparatus, which will be able to detect strong Earthquakes, very weak geodetic signals, as well as general relativity effects like Lense-Thirring and de Sitter, will help scientific advancements in Theoretical Physics, Geophysics, and Geodesy, among other scientific fields.204 248 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Rotational motions from the 2016, Central Italy seismic sequence, as observed by an underground ring laser gyroscope
(2018); ; ; ; We present the analysis of rotational and translational ground motions from earthquakes recorded during October–November 2016, in association with the Central Italy seismic sequence. We use co-located measurements of the vertical ground rotation rate from a large ring laser gyroscope and the three components of ground velocity from a broad-band seismometer. Both instruments are positioned in a deep underground environment, within the Gran Sasso National Laboratories of the Istituto Nazionale di Fisica Nucleare. We collected dozens of events spanning the 3.5–5.9 magnitude range and epicentral distances between 30 and 70 km. This data set constitutes an unprecedented observation of the vertical rotational motions associated with an intense seismic sequence at local distance. Under the plane-wave approximation we process the data set in order to get an experimental estimation of the events backazimuth. Peak values of rotation rate (PRR) and horizontal acceleration (PGA) are markedly correlated, according to a scaling constant which is consistent with previous measurements from different earthquake sequences. We used a prediction model in use for Italy to calculate the expected PGA at the recording site, obtaining consequently predictions for PRR. Within the modelling uncertainties, predicted rotations are consistent with the observed ones, suggesting the possibility of establishing specific attenuation models for ground rotations, like the scaling of peak velocity and peak acceleration in empirical ground-motion prediction relationships. In a second step, after identifying the direction of the incoming wavefield, we extract phase-velocity data using the spectral ratio of the translational and rotational components. This analysis is performed over time windows associated with the P-coda, S-coda and Lg phase. Results are consistent with independent estimates of shear wave velocities in the shallow crust of the Central Apennines291 348 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Three-axial Fiber Bragg Grating Strain Sensor for Volcano Monitoring
Fiber optic and FBGs sensors have attained a large diffusion in the last years as cost-effective monitoring and diagnostic devices in civil engineering. However, in spite of their potential impact, these instruments have found very limited application in geophysics. In order to study earthquakes and volcanoes, the measurement of crustal deformation is of crucial importance. Stress and strain behaviour is among the best indicators of changes in the activity of volcanoes .. Deep bore-hole dilatometers and strainmeters have been employed for volcano monitoring. These instruments are very sensitive and reliable, but are not cost-effective and their installation requires a large effort. Fiber optic based devices offer low cost, small size, wide frequency band, easier deployment and even the possibility of creating a local network with several sensors linked in an array. We present the realization, installation and first results of a shallow-borehole (8,5 meters depth) three-axial Fiber Bragg Grating (FBG) strain sensor prototype. This sensor has been developed in the framework of the MED-SUV project and installed on Etna volcano, in the facilities of the Serra La Nave astrophysical observatory. The installation siteis about 7 Km South-West of the summit craters, at an elevation of about 1740 m. The main goal of our work is the realization of a three-axial device having a high resolution and accuracy in static and dynamic strain measurements, with special attention to the trade-off among resolution, cost and power consumption. The sensor structure and its read-out system are innovative and offer practical advantages in comparison with traditional strain meters. Here we present data collected during the first five months of operation. In particular, the very clear signals recorded in the occurrence of the Central Italy seismic event of October 30th demonstrate the performances of our device.81 155 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Deep underground rotation measurements: GINGERino ring laser gyroscope in Gran Sasso
(2017); ; ; ; GINGERino is a large frame laser gyroscope investigating the ground motion in the most inner part of the underground international laboratory of the Gran Sasso, in central Italy. It consists of a square ring laser with a $3.6$ m side. Several days of continuous measurements have been collected, with the apparatus running unattended. The power spectral density in the seismic bandwidth is at the level of $10^{-10} \rm{(rad/s)/\sqrt{Hz}}$. A maximum resolution of $30\,\rm{prad/s}$ is obtained with an integration time of few hundred seconds. The ring laser routinely detects seismic rotations induced by both regional earthquakes and teleseisms. A broadband seismic station is installed on the same structure of the gyroscope. First analysis of the correlation between the rotational and the translational signal are presented.293 7 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Horizontal rotation signals detected by “G-Pisa” ring laser for the Mw = 9.0, March 2011 Japan earthquake
(2012); ; ; ; We report the observation of the ground rotation induced by theMw=9.0, 11th of March 2011, Japan earthquake. The rotation measurements have been conducted with a ring laser gyroscope operating in a vertical plane, thus detecting rotations around the horizontal axis. Comparison of ground rotations with vertical accelerations from a co-located force{balance accelerometer shows excellent ring laser coupling at periods longer than 100s. Under the plane wave assumption, we derive a theoretical relationship between horizontal rotation and vertical acceleration for Rayleigh waves. Due to the oblique mounting of the gyroscope with respect to the wave direction{of{arrival, apparent velocities derived from the acceleration / rotation rate ratio are expected to be always larger than, or equal to the true wave propagation velocity. This hypothesis is con_rmed through comparison with fundamental{mode, Rayleigh wave phase velocities predicted for a standard Earth model.248 423 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Microgravity vertical gradient measurement in the site of VIRGO interferometric antenna (Pisa plain, Italy)
(2008-10); ; ; ; The site of the European Gravitational Observatory (EGO) located in the countryside near Pisa (Tuscany, Italy) was investigated by a microgravity vertical gradient (MVG) survey. The EGO site houses the VIRGO interferometric antenna for gravitational waves detection. The microgravity survey aims to highlight the gravity anomalies of high-frequency related to more superficial geological sources in order to obtain a detailed model of the lithologic setting of the VIRGO site, that will allow an estimate of the noise induced by seismic waves and by Newtonian interference. This paper presents the results of the gradiometric survey of 2006 in the area of the interferometric antenna. MVG measurements allow us to enhance the high frequency signal strongly associated with the shallow structures. The gradient gravity map shows a main negative pattern that seems related to the trending of the high density layer of gravel that was evidenced in geotechnical drillings executed along the orthogonal arms during the construction of the VIRGO complex. Calibrating the relationship between the vertical gradient and the depth of the gravel interface we have computed a model of gravity gradient for the whole VIRGO site, defining the 3D distribution of the top surface of this layer. This latter shows a NE-SW negative pattern that may represent a palaeo-bed alluvial of the Serchio from the Bientina River system.959 1266 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Gradiometric microgravity survey in the area of VIRGO interferometric antenna (Pisa plain, Italy)
(2007-11); ; ; ; A gradiometric microgravity survey was performed in the site of the EGO (European Gravitational Observatory) located in the countryside near Pisa (Tuscany, Italy). The main purpose of the current study is to delineate high-frequency gravity anomalies and to correlate them with the shallow geological sources in order to obtain a detailed model of the lithological setting. The survey network is compose by 59 gradiometric stations located in the 4X4 Km2 target area. The highly detailed positioning of the station points can be carried out by means of a GPS (Global Positioning System). The measurements were made using a portable tower frame and the LaCoste&Romberg D-model gravity meter with Aliod 100 linear electronic feedback system, with a 1 µgal sensitivity. The study area is located in the Neogene-Quaternary basin of the lower Arno River Valley. The density values calculated from the 2.5D gravity model relative to the gravel (2.1 g/cm3) and the clay (1.5 -1.6 g/cm3). An anomaly negative pattern are shown in the gradient gravity map: the negative gravity anomaly seem related to the increase in depth of the layer of gravel - high layer density. The NE-SW negative pattern should be to represent a palaeo-bed alluvial of the Lower Arno and Serchio of Bientina River system, related to the Late Pleistocene extensional tectonics in the Pisa Plain.236 163 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Developing fiber lasers with Bragg reflectors as deep sea hydrophones
(2006-12); ; ; ; The present paper will discuss the work in progress at the Department of Physics of the University of Pisa in collaboration with the IFAC laboratory of CNR in Florence to develop pressure sensors with outstanding sensitivity in the acoustic and ultrasonic ranges. These devices are based on optically-pumped fiber lasers, where the mirrors are Bragg gratings written into the fiber core.225 405 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , A sapphire monolithic differential accelerometer as core sensor for gravity gradiometric geophysical instrumentation
(2006-08); ; ; ; Gradiometric gravimetry is a survey technique widely used in geological structure investigation. This work demonstrates the feasibility of a new class of low frequency accelerometers for geodynamics studies and space applications. We present the design features of a new low noise single-axis differential accelerometer; the sensor is suitable to be used in a Gravity Gradiometer (GG) system for land geophysical survey and gravity gradient measurements. A resolution of 1 Eötvös (1 Eö=10−9s−2) at one sample per second is achievable in a compact, lightweight (less than 2 kg) portable instrument, operating at room temperature. The basic components of the sensor are two identical rigidly connected accelerometers separated by a 15-cm baseline vector and the useful signal is extracted as the subtraction of the two outputs, by means of an interferometric microwave readout system. The structure will be engraved in a monocrystal of sapphire by means of Computer-Numerically-Controlled (CNC) ultrasonic machining: the material was chosen because of its unique mix of outstanding mechanical and dielectric properties.218 449
