Magnoni, Federica
Preferred name
Magnoni, Federica
Email
federica.magnoni@ingv.it
Staff
staff
ORCID
13 results
Filters
Settings
The search returned 13 results
Now showing 1 - 10 of 13
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Breaking Adria and Southern Italy: adjoint tomography of an intricate lithosphere
High-resolution adjoint tomography has emerged as a powerful tool for unraveling the complexities of the Earth's lithosphere. We present an overview of the analysis conducted on the seismic images generated by the application of high-resolution adjoint tomography for the lithosphere beneath Southern Italy and the Adriatic region. Recently, we have proposed IMAGINE_IT, a reference 3D high-resolution seismic tomography model for tectonic and geological structures of the Italian lithosphere. Enhanced accuracy is enabled by state-of-the-art methods, including three-dimensional wavefield simulations based on SPECFEM3D in combination with an adjoint-state method. Adria plate plays a peculiar role in the geodynamics of the Central Mediterranean. It is the foreland of non-coeval mountain ranges and its margins are consumed in the process by subduction systems under the Alps to the north, the Apennines to the west and the Dinarides to the east. The complex behavior of this system and the large geographical heterogeneity in data availability lead to a fragmented understanding of the Adria plate. In particular, its lithospheric structure, in terms of Vp and Vs profiles, is poorly known due to a lack of seismic stations, poor earthquake location quality (large observational gaps), and the consequent lack of coverage by classical seismic tomography methods. The uncertainties increase the difficulty of correctly assessing the seismic hazard along the Adriatic coasts (including tsunami hazard evaluation). Here, we present additional details of this region, such as the mid-Adriatic ridge, and a preliminary set of iterations that exploit 7 years of additional data (IMAGINE_IT was limited to data until 2015) and the recent deployment of very dense regional arrays of broadband seismic stations– the 2016-2019 AlpArray and the AdriaArray Seismic Network currently under installation – which provide a new opportunity to improve our comprehension of the area. Furthermore, we focus on southern Italy, starting from L’Aquila region up to Calabrian Arc. The analysis of the images produced by high-resolution adjoint tomography IMAGINE_IT reveals intricate details of the lithospheric architecture, including crustal thickness variations, seismic velocity anomalies, and (lack of) subduction-related features.37 98 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Adjoint tomography of the Italian lithosphere
The evolution and state of geological structure at Earth’s surface is best understood with an accurate characterization of the subsurface, where fluid distribution plays a key role. We present high-resolution seismic tomographic images of tectonic and geological features of the Italian lithosphere based on ground motion recordings and obtained through an iterative procedure. Enhanced accuracy is enabled by state-of-the-art three-dimensional wavefield simulations in combination with an adjoint-state method. The resulting tomographic model characterizes the subsurface structure in terms of compressional and shear wavespeed values at remarkable resolution, corresponding to a minimum period of ~10 s. As primary findings of our work, images of the lithospheric structure in Central Italy are consistent with recent studies on the distribution of fluids and gas (CO2) within the Italian subsurface, allowing us to infer the presence of deep melted material that induces shallow gas fluxes, or traps and deep storage of gas that can be correlated with seismicity. We illuminate Mt. Etna volcano and support the hypothesis of a deep reservoir (~30 km) feeding an intermediate-depth magma-filled intrusive body, which in turn is connected to a shallow chamber. We also investigate the intriguing features of the Adriatic plate offshore of the eastern Italian coast. Tomographic evidence reveals a structure of the plate made of two distinct microplates with different fabric and behavior, and separated by the Gargano deformation zone, indicating a complex lithosphere and tectonic evolution.31 72 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Central Italy high-resolution model for accurate ground motion simulation
A challenge in earthquake seismology is the provision of realistic and accurate ground-shaking scenarios for seismic hazard and risk assessment. Owing to the exponential growth of HPC resources, the application of physics-based methods to ground motion characterization has become increasingly popular. However, physics-based techniques could break down in the simulation of high-frequency ground motion, particularly at frequencies higher than 1 Hz, which are the most relevant for earthquake engineers. A main issue is represented by the limited resolution of seismic wave speed models. Currently, one of the best approaches to retrieve high-resolution wave speed models relies on the combination of the Spectral Element Method (SEM) with adjoint-state methods within the framework of (3D) Full Waveform Inversion (FWI). Here we use the Salvus software to resolve the velocity structure of central Italy, which is exposed to high seismic hazard. We invert a dataset including 248 events (occurred between 2005 and 2019, with a magnitude ranging between 2.8 and 5.5) recorded by the Italian seismic network and provided by INGV. We implement a multi-scale approach to 3D-FWI by progressively incorporating the high-frequency content of waveform recording. In the first cycle of iterations, we retrieve the long-wavelength structure of the model. At this stage, we also perform several tests, e.g. different source/receiver cutouts, to properly tune the FWI configuration parameters to our problem. Then we use the best fitting model as the initial model of a second cycle of iterations, combining it with Vs30 and topographic data. By accounting for site effects, we maximize the level of detail in the starting model, thus preventing the FWI algorithm from being trapped in local minima. The retrieved high-resolution wave speed model will shed light on the velocity structure of central Italy, thus improving the seismic hazard assessment of this region.52 86 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Breaking Adria: adjoint tomography of a disappearing continental microplate
The Adria plate plays a peculiar role in the geodynamics of the Central Mediterranean. It is the foreland of non-coeval mountain ranges and its margins are consumed in the process by subduction systems under the Alps to the north, the Apennines to the west and the Dinarides to the east. The complex behavior of this system and the large heterogeneity in data availability lead to a fragmented understanding of the Adria plate. In particular, its lithospheric structure, in terms of Vp and Vs profiles, is poorly known due to a lack of seismic stations, poor earthquake location quality (large observational gaps) and the consequent lack of coverage by classical seismic tomography methods. The uncertainties increase the difficulty of correctly assessing the seismic hazard along the Adriatic coasts (including tsunami hazard). Recently, we have proposed IMAGINE_IT, a reference 3D high-reso- lution seismic tomography of the Italian lithosphere. Enhanced accuracy is enabled by three-dimensional wavefield simulations based on SPECFEM3D in combination with an adjoint-state method. The Adria plate is located at the eastern border of the volume considered in the simulations, nevertheless, our tomography is able to image this plate with an unprecedented resolution and supports the idea that it is made of two distinct microplates having dif- ferent fabric and behavior and separated by the Gargano deformation zone. We have highlighted a northern portion with more complex wavespeed anomalies and a thinner crust, and a southern part with a more regularly layered wavespeed structure and a thicker crust. Here, we focus on additional details of those images, such as the mid-Adriatic ridge and a new set of iterations that exploit 7 years of additional data (IMAGINE_IT was limited to data until 2015) and the 2016-2019 AlpArray very dense regional arrays of broadband seismic stations which provide a new opportunity to improve our comprehension of the area.57 111 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Investigating trade-offs in anelastic full-waveform inversions for regional- to global-scale models
(2021-12-13); ; ; ; The attenuation of seismic signals plays a crucial role in constraining water content, partial melting, and temperature variations in Earth's crust and mantle. That is, improving the resolution of seismic anelastic models is essential for better understanding the Earth's subsurface structure and its dynamics. However, attenuation tomography models are typically less resolved than seismic wavespeed models mainly due to amplitude measurements' complex nature, which are sensitive to scattering/defocusing, anelasticity, source radiation pattern, and scalar moment. Moreover, attenuation affects not only amplitudes but also seismic wavespeeds as it causes physical dispersion. Taking the full 3D complexity of seismic wave propagation into account helps minimizing the bias from ignoring scattering/defocusing effects in classical anelastic models. Many synthetic tests have so far been performed to validate anelastic full-waveform inversions. However, the trade-off between the elastic and anelastic parameters, which may be highlighted more at the global scale because of the sparse data coverage, is not well investigated or understood in a full 3D setup. Our goal is to test the resolution and trade-off between elastic and anelastic parameters by conducting a synthetic full-waveform benchmark targeting an existing global 3D attenuation model and starting from a 1D Q-model. Although we investigate whole mantle inversions down to the CMB together with the crust, our primary focus will be in the upper mantle where the low-Q layer in 1D Q-models located at around 200 km depth causes the main challenge, speci cally in surface-wave propagation. Our measurement period range lies within 50 to 250 s for which the Cowling approximation to self-gravitation in the numerical wave propagation solver SPECFEM3D_GLOBE is still in good agreement. The aim is to assimilate both phase and amplitude pieces of information in our seismic inversions. The anelastic/elastic iterations are performed on PRACE's Marconi100 system, taking advantage of the GPU hardware accelerators. We present our benchmark results which will allow us to re ne strategies for large-scale anelastic inversions.71 55 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Effects of surface topography in kinematic source inversion models. Application to the Norcia, Mw 6.5, 30 October 2016, Central Italy Earthquake.
(2021-12-13); ; ; ; The topography is the only ingredient of the kinematic finite fault inversion that is explicitly known. Nevertheless, such analyses commonly assume Green's functions for a 1D layered geological model with flat surface topography. Minimization of the complexity is needed to reduce the computational cost of the inversions in realistic conditions but such assumptions can significantly impact the retrieved source parameters. In particular, the lack of management of approximations and uncertainties could lead to overconfident and biased interpretations of the kinematic results. The increasing computational power available in the coming exascale era provides the opportunity to include the topography at a high resolution and low cost. We have modified the non-negative least-square inversion method of Dreger et al. [2005] for taking into account Green’s functions generated by SPECFEM3D including explicitly significant topography. We applied this new procedure to retrieve the kinematic rupture history of the 30 October 2016 Norcia earthquake (Mw 6.5), by inverting strong motion and high-rate global positioning system datasets. The considered complex fault geometry consists of a main normal fault striking N155°, dipping 47° and belonging to the Mt. Vettore‐Mt. Bove fault system (VBFS), and a secondary fault plane striking N210° and dipping 36° to the NW. The choice is supported by seismological data, geological constraints, and observed surface breakages, but also by inferences from dynamic simulations. We have inverted for slip and rake distribution on the faults while allowing a Bayesian exploration of all the remaining parameters (i.e., rupture velocity, rise time).70 54 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Breaking the Adriatic Plate: Adjoint 3D Tomography for the Italian Lithosphere
The evolution and state of geological structure at Earth’s surface is best understood with an accurate characterization of the subsurface. We present high-resolution seismic tomographic images of tectonic and geological structures of the Italian lithosphere. Enhanced accuracy is enabled by state-of-the-art methods, including three-dimensional wavefield simulations in combination with an adjoint-state method. The procedure iteratively improves an initial 3D traveltime tomography model of the region using full waveforms from 163 earthquakes recorded by 412 stations. Model Im25, resulting from 25 iterations, characterizes the subsurface structure in terms of compressional and shear wavespeeds at a resolution corresponding to a minimum period ~10 s. We discuss three primary findings of Im25 model: a) images of the lithospheric structure in Central Italy highlight the role of fluids and gas (CO2) and their correlation with seismicity, b) images of Southern Italy illuminates the plumbing system of Mt. Etna volcano, c) images of the Adriatic plate explore its complex lithosphere and tectonic evolution.78 100 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Introducing Surface Topography Effects and the 3D Velocity Structure to Refine the Kinematic Source Inversion Models. Application to the Norcia, Mw 6.5, 30 October 2016, Central Italy Earthquake
Kinematic finite fault inversion procedures of strong motion data are usually managed by calculating Green's functions for 1D layered seismic velocity models with flat surface topography. However, many regions in the world are characterized by significant topography and complex geological models. In these cases, the lack of adoption of more complex seismic wave propagation models and surface topography during finite fault kinematic inversions can significantly impact on the retrieved source parameters. We have modified the non-negative least-square inversion method of Dreger et al. [2005] for taking into account Green's functions generated by SPECFEM3D for a 3D velocity model including topography. The computation of Green's functions for such model is very expensive, for this reason we have decided to assume a fixed fault geometry, allowing only for rake variation and inverting for rupture velocity, rise time and slip distribution. We have applied the new procedure for the finite fault inversion of the 2016 Mw 6.5 Norcia earthquake, for which none of the several studies in literature have adopted 3D layered seismic velocity models or have taken into account the significant topography of this area. We have finally compared the slip model retrieved with this procedure to the model from Scognamiglio et al. (2018) obtained with same data and fault geometry but 1D velocity model and no topography.25 21 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , On the 2016-2017 Central Italy Seismic Sequence: Uncertainty for Source Parameters of Mainshocks and Revised Catalogue of Moment Tensors
The Central Italy seismic sequence began on August 24th, 2016, and was marked by three mainshocks in two months culminated with the Mw 6.5, October 30th, 2016, event. Location, depth and prevalent normal faulting mechanisms indicate that the sequence originated in the shallow crust of the Apennine chain where the current extensional regime overprints contractional structures. Structural complexity plays a major role in fault segmentation and interaction in this region, with important consequences on seismic behavior and mechanics of earthquake faulting. This complexity is evidenced by the co-existence of fault planes with different focal mechanisms in the same area. Here we analyze the robustness of moment tensor solutions for the three mainshocks of the 2016-2017 Central Italy sequence. In particular, we study the effect of number and distribution of the inverted stations and employed wave speed model (1D and 3D) with the goal of providing more reliable estimates of the source parameters (strike, dip, rake and Mw) and corresponding uncertainties. The latter are estimated by performing a bootstrap analysis on hundreds of solutions computed by varying the distribution of stations for 1D and 3D velocity models. Moreover, we report on reviewed source geometries of the Central Italy sequence as retrieved by moment tensor analysis by integrating the actual TDMT revised catalogue (http://terremoti.ingv.it/tdmt) for M4+, with new updated solutions based on a new Italian 3D wave speed model. The realization of a complete moment tensor catalogue, in addition to the estimate of uncertainties associated to the computed focal planes and Mw for the three mainshocks, can contribute to explain the complexity of the seismogenic processes active in the Central Apennines and help in understanding the main features of this seismic sequence.23 33 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Active provenance for Data-Intensive workflows: engaging users and developers
We present a practical approach for provenance capturing in Data-Intensive workflow systems. It provides contextualisation by recording injected domain metadata with the provenance stream. It offers control over lineage precision, combining automation with specified adaptations. We address provenance tasks such as extraction of domain metadata, injection of custom annotations, accuracy and integration of records from multiple independent workflows running in distributed contexts. To allow such flexibility, we introduce the concepts of programmable Provenance Types and Provenance Configuration.Provenance Types handle domain contextualisation and allow developers to model lineage patterns by re-defining API methods, composing easy-to-use extensions. Provenance Configuration, instead, enables users of a Data-Intensive workflow execution to prepare it for provenance capture, by configuring the attribution of Provenance Types to components and by specifying grouping into semantic clusters. This enables better searches over the lineage records. Provenance Types and Provenance Configuration are demonstrated in a system being used by computational seismologists. It is based on an extended provenance model, S-PROV.56 174
