Di Grazia, Giuseppe
Preferred name
Di Grazia, Giuseppe
Email
giuseppe.digrazia@ingv.it
Staff
staff
ORCID
Researcher ID
G-1784-2015
81 results
Filters
Settings
The search returned 81 results
Now showing 1 - 10 of 81
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The influence of volcano topographic changes on infrasound amplitude: lava fountains at Mt. Etna in 2021
Infrasound signals are used to investigate and monitor active volcanoes during eruptive and degassing activity. Infrasound amplitude information has been used to estimate eruptive parameters such as plume height, magma discharge rate, and lava fountain height. Active volcanoes are characterized by pronounced topography and, during eruptive activity, the topography can change rapidly, affecting the observed infrasound amplitudes. While the interaction of infrasonic signals with topography has been widely investigated over the past decade, there has been limited work on the impact of changing topography on the infrasonic amplitudes. In this work, the infrasonic signals accompanying 57 lava fountain paroxysms at Mt. Etna (Italy) during 2021 were analyzed. In particular, the temporal and spatial variations of the infrasound amplitudes were investigated. During 2021, significant changes in the topography around the most active crater (the South East Crater) took place and were reconstructed in detail using high resolution imagery from unoccupied aerial system surveys. Through analysis of the observed infrasound signals and numerical simulations of the acoustic wavefield, we demonstrate that the observed spatial and temporal variation in the infrasound signal amplitudes can largely be explained by the combined effects of changes in the location of the acoustic source and changes in the near-vent topography, together with source acoustic amplitude variations. This work demonstrates the importance of accurate source locations and high-resolution topographic information, particularly in the near-vent region where the topography is most likely to change rapidly and illustrates that changing topography should be considered when interpreting local infrasound observations over long time scales.342 46 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Inferences on the 2021 Ongoing Volcanic Unrest at Vulcano Island (Italy) through a Comprehensive Multidisciplinary Surveillance Network
In September 2021, the La Fossa crater at Vulcano, in Italy, entered a new phase of unrest. We discuss a set of monitoring parameters included in the INGV surveillance network, which closely tracked the sequence of effects related to the crisis. The low-frequency local seismicity sharply increased, while the GPS and tiltmeter networks recorded the inflation of the cone, as an effect of fluid expansion in the hydrothermal system. Gravity variations were probably the effects of fast processes within shallow sources. The anomalies in soil CO2 flux, fumarole temperature, and in plume SO2 flux marked the strong increase in the vapor output from crater fumaroles. The signs of the impending crisis had been evident in the chemical and isotopic composition of fumarole gases since July 2021. These geochemical anomalies were clearly indicative of the enhanced input of gases from a magmatic source. In October, the massive degassing also influenced the areas at the base of the cone. In some areas, soil CO2 degassing and the thermal aquifer recorded strong anomalies. By early November, the crisis reached its acme. Afterward, the monitored parameters started a slow and discontinuous decreasing trend although remaining, some of them, sensibly above the background for several months. The multidisciplinary approach proved decisive for the interpretation of the underlying processes acting in the different phases of the unrest, thus allowing a consistent evaluation of the multiple hazards.891 145 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Integration of microseism, wavemeter buoy, HF radar and hindcast data to analyze the Mediterranean cyclone Helios
In this work, we study a Mediterranean cyclone, Helios, which took place during 9–11 February 2023 in the southeastern part of Sicily and Malta, by a multiparametric approach combining microseism results with sea state and meteorological data provided by wavemeter buoy, HF radar, hindcast maps and satellite SEVIRI images. The sub-tropical system Helios caused heavy rainfall, strong wind gusts and violent storm surges with significant wave heights greater than 5 m. We deal with the relationships between such a system and the features of microseism (the most continuous and ubiquitous seismic signal on Earth) in terms of spectral content, space–time variation of the amplitude and source locations tracked by means of two methods (amplitude-based grid search and array techniques). By comparing the location of the microseism sources and the area affected by significant storm surges derived from sea state data, we note that the microseism location results are in agreement with the real position of the storm surges. In addition, we are able to obtain the seismic signature of Helios using a method that exploits the coherence of continuous seismic noise. Hence, we show how an innovative monitoring system of the Mediterranean cyclones can be designed by integrating microseism information with other techniques routinely used to study meteorological phenomena.133 114 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , The initial phases of the 2008–2009 Mount Etna eruption: A multidisciplinary approach for hazard assessment
Between 2007 and early 2008, the Istituto Nazionale di Geofisica e Vulcanologia (INGV) monitoring networks on Etna volcano recorded a recharging phase that climaxed with a new effusive eruption on 13 May 2008 and lasted about 14 months. A dike‐forming intrusion was accompanied by a violent seismic swarm, with more than 230 events recorded in the first 6 h, the largest being ML = 3.9. In the meanwhile, marked ground deformation was recorded by the permanent tilt and GPS networks, and sudden changes in the summit area were detected by five continuously recording magnetic stations. Poor weather conditions did not allow direct observation of the eruptive events, but important information was provided by infrared satellite images that detected the start of lava fountains from the eruptive fissure, feeding a lava flow. This flow spread within the Valle del Bove depression, covering 6.4 km on the southeastern flank of the volcano in a few hours. The seismicity and deformation pattern indicated that the dike‐forming intrusion was propagating northward. It produced a dry fracture field, which generated concern for the possibility that the eruptive fissures could expand downslope toward populated areas. Monitoring and modeling of the multidisciplinary data, together with the simulations of ash dispersal and lava flows, allowed us both to infer the eruptive mechanisms and to provide correct interpretation of the ongoing phenomena, furnishing useful information for civil defense purposes. We describe how this approach of feedback between monitoring and research provides critical support to risk evaluation.339 38 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Tremor source location based on amplitude decay
(2008); ; ; ;Falsaperla, S.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Catania, Catania, ItaliaDi Grazia, G.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Catania, Catania, ItaliaA 3D grid search method for the location of the volcanic tremor source was applied to data recorded at Mt. Etna in 2004 [Di Grazia et al., 2006]. The aim of that application was to highlight changes in time and space of the location of the tremor source, heralding the onset of a lava emission on 7 September, 2004. The time span investigated ranged from January to November 2004. The method exploits the amplitude decay of the seismic signal recorded at permanent stations used for monitoring purposes. Consequently, it does not require any additional set up of temporary, mobile stations. We present here the results of that application, which was followed in the autumn of 2006 by the successful implementation of the method we named TREMLOC, as an automated and continuous near real time analysis for the location of volcanic tremor at the Istituto Nazionale di Geofisica e Vulcanologia (INGV) - Sezione di Catania.143 182 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , 3-D Q-coda attenuation structure at Mt. Etna (Italy)
Three dimensional attenuation images of Mt Etna volcano obtained by the analysis of Q-coda from local volcano-tectonic earthquakes are presented in this work. Seismic sources are confined inside the Etna structure with a maximum focal depth of 35 km below the sea level. The space distribution of the attenuation values was calculated by using 3-D weighting functions derived by the sensitivity kernels of Pacheco & Snieders and approximated by a polynomial interpolation, represented in the maps by using a backprojection method. Data were analyzed in four bands with central frequency placed at 1.5, 3, 6 and 12 Hz, respectively. We observed a frequency dependence of Q-coda with values that range from 55 at 1.5 Hz to 218 at 12 Hz. Q-coda space distribution in the Etna area shows almost uniformity in the average attenuation in the first 35 km below the surface. The images were derived with a resolution of 5 km. We observe as one of our main conclusions that Q-coda attenuation space anomalies are correlated with the areas of highest structural heterogeneities and are distributed along the well-known tectonic structures which characterize the crust in Mt Etna region. Previous and numerous velocity and attenuation images describing the structure of Mt Etna support our main conclusion: high Q-coda volumes almost coincide with the zones marked by high velocity and relative low total attenuation for direct waves.245 572 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , A multivariate probabilistic graphical model for real-time volcano monitoring on Mount Etna
(2017-04-20); ; ; ; Real-time assessment of the state of a volcano plays a key role for civil protection purposes. Unfortunately, because of the coupling of highly nonlinear and partially known complex volcanic processes, and the intrinsic uncertainties in measured parameters, the state of a volcano needs to be expressed in probabilistic terms, thus making any rapid assessment sometimes impractical. With the aim of aiding on-duty personnel in volcano-monitoring roles, we present an expert system approach to automatically estimate the ongoing state of a volcano from all available measurements. The system consists of a probabilistic model that encodes the conditional dependencies between measurements and volcanic states in a directed acyclic graph and renders an estimation of the probability distribution of the feasible volcanic states.We test the model with Mount Etna (Italy) as a case study by considering a long record of multivariate data. Results indicate that the proposed model is effective for early warning and has considerable potential for decision-making purposes.1114 272 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Seismoacoustic investigations of paroxysmal activity at Mt. Etna volcano: New insights into the 16 November 2006 eruption
(2011); ; ; ; On 16 November 2006, a 1 day long paroxysmal eruption occurred at the summit craters of Mt. Etna volcano. A multiparametric approach, consisting of analyzing infrasonic, seismic, and video camera recordings, was carried out to follow its evolution. Volcanological and geophysical observations identified three eruptive phases. In the first phase, infrasonic and seismic characteristics reflected the highly explosive nature of the activity. Waveform characterization of infrasound events confirmed the activity of the several explosive vents at the summit of Southeast Crater (SEC). During the second phase, results highlighted the decoupling between seismic and infrasonic sources, which was due to the decrease in explosive activity and the reactivation of effusive vents located south of Bocca Nuova and on the saddle between Bocca Nuova and SEC. The third phase was the most intense and was characterized by various volcanic phenomena (pyroclastic flows, jets of dark ash, and white steam). The very high radiated infrasonic energy, together with infrasound event features, led us to infer a gas enrichment of the shallow magma column, preceding by a few minutes and likely related to the pyroclastic flows in the SEC area. After the eruption at SEC, variations in infrasound events related to the activity of Northeast Crater (NEC) were found. The observed spectral changes and the source mechanism modeling of the NEC infrasound events suggest the existence of a link in the plumbing system feeding the two craters.631 21 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , A multiparameter approach to volcano monitoring based on 4D analyses of seismo-volcanic and acoustic signals: The 2008 Mt. Etna eruption
(2009-09-30); ; ; ; Volcanic tremor and low frequency events, together with infrasound signals, can represent important precursory phenomena of eruptive activity because of their strict relationship with eruptive mechanisms and with fluid flows through the volcano's feeding system. Important variations of these seismo-volcanic and infrasound signals, recorded at Mt. Etna volcano, occurred both in the medium- and short-term before the eruption, that took place on 13 May 2008. The most significant changes were observed in the frequency content and location of LP events, as well as in volcanic tremor location, that allowed us to track the magma pathway feeding the 2008 eruptive activity. The infrasound showed three different families of events linked to the activity of the three active vents: North-East crater, South-East crater and the eruptive fissure. The seismic and infrasonic variations reported, corroborated by ground deformations variations, help to develop a quantitative prediction and early-warning system for effusive and or explosive eruptions.233 38 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Radon Tells Unexpected Tales of Mount Etna’s Unrest
(2018-03-22); ; ; ; Some researchers view radon emissions as a precursor to earthquakes, especially those of high magnitude [e.g., Wang et al., 2014; Lombardi and Voltattorni, 2010], but the debate in the scientific community about the applicability of the gas to surveillance systems remains open. Yet radon “works” at Italy’s Mount Etna, one of the world’s most active volcanoes, although not specifically as a precursor to earthquakes. In a broader sense, this naturally radioactive gas from the decay of uranium in the soil, which has been analyzed at Etna in the past few years, acts as a tracer of eruptive activity and also, in some cases, of seismic–tectonic phenomena. To deepen the understanding of tectonic and eruptive phenomena at Etna, scientists analyzed radon escaping from the ground and compared those data with measurements gathered continuously by instrumental networks on the volcano. Here Etna is a boon to scientists—it’s traced by roads, making it easy to access for scientific observation. Dense monitoring networks, managed by the Istituto Nazionale di Geofisica e Vulcanologia, Catania–Osservatorio Etneo (INGV-OE), have been continuously observing the volcano for more than 40 years. This continuous dense monitoring made the volcano the perfect open-air laboratory for deciphering how eruptive activity may influence radon emissions.1148 214
