Skip to main content
The search returned 109 results
Now showing 1 - 10 of 109
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,
      196  532
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Discriminating between natural and anthropogenic earthquakes: insights from the Emilia Romagna (Italy) 2012 seismic sequence

    The potential for oilfield activities to trigger earthquakes in seismogenic areas has been hotly debated. Our model compares the stress changes from remote water injection and a natural earthquake, both of which occurred in northern Italy in recent years, and their potential effects on a nearby Mw 5.9 earthquake that occurred in 2012. First, we calculate the Coulomb stress from 20 years of fluid injection in a nearby oilfield by using a poroelastic model. Then, we compute the stress changes for a 2011 Mw 4.5 earthquake that occurred close to the area of the 2012 mainshock. We found that anthropogenic activities produced an effect that was less than 10% of that generated by the Mw 4.5 earthquake. Therefore, the 2012 earthquake was likely associated with a natural stress increase. The probability of triggering depends on the magnitude of recent earthquakes, the amount of injected water, the distance from an event, and the proximity to the failure of the activated fault. Determining changes that are associated with seismic hazards requires poroelastic area-specific models that include both tectonic and anthropogenic activities. This comprehensive approach is particularly important when assessing the risk of triggered seismicity near densely populated areas.
      414  4
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    AlpArray-Italy: Site description and noise characterization

    Within the framework of the European joint research initiative AlpArray (http://www.alparray.ethz.ch/), we de- ployed overall 20 seismic broad-band stations in Northern Italy and on two islands in the Tyrrhenian Sea (Capraia and Montecristo) during Fall-Winter 2015. All the stations, connected in real-time, were installed at sites selected according to the AlpArray Seismic Network plan: 16 temporary stations running for two to three years and 4 new permanent stations in sites already occupied by accelerometers of the INGV national network. Most temporary stations are equipped with REF TEK 130S digitizers and Nanometrics Trillium Compact 120s sensors (a couple have Nanometrics Trillium 120P and one Streckeisen STS2). For each site we describe the settings and discuss the noise levels, the site effects and the preliminary sensitivity analysis.
      326  135
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Conclusion: recommendations and findings of the RED SEED working group

    (The Geological Society of London, 2016) ; ; ; ;
    RED SEED stands for Risk Evaluation, Detection and Simulation during Effusive Eruption Disasters, and combines stakeholders from the remote sensing, modelling and response communities with experience in tracking volcanic effusive events. The group first met during a three day-long workshop held in Clermont Ferrand (France) between 28 and 30 May 2013. During each day, presentations were given reviewing the state of the art in terms of (a) volcano hot spot detection and parameterization, (b) operational satellite-based hot spot detection systems, (c) lava flow modelling and (d) response protocols during effusive crises. At the end of each pre- sentation set, the four groups retreated to discuss and report on requirements for a truly integrated and operational response that satisfactorily combines remote sensors, modellers and responders during an effusive crisis. The results of collating the final reports, and follow-up discussions that have been on-going since the workshop, are given here. We can reduce our discussions to four main findings. (1) Hot spot detection tools are operational and capable of providing effusive erup- tion onset notice within 15 min. (2) Spectral radiance metrics can also be provided with high degrees of confidence. However, if we are to achieve a truly global system, more local receiving stations need to be installed with hot spot detection and data processing modules running on-site and in real time. (3) Models are operational, but need real-time input of reliable time-averaged discharge rate data and regular updates of digital elevation models if they are to be effective; the latter can be provided by the radar/photogrammetry community. (4) Information needs to be provided in an agreed and standard format following an ensemble approach and using models that have been validated and recognized as trustworthy by the responding authorities. All of this requires a sophisticated and centralized data collection, distribution and reporting hub that is based on a philosophy of joint ownership and mutual trust. While the next chapter carries out an exercise to explore the viability of the last point, the detailed recommendations behind these findings are detailed here.
      300  47
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Esperimento DIONYSUS: Deep structure of the IONian Sea and east SicilY: wide-angle seismic SUrvey of the Calabria Subduction zone and Tethys margins. Il contributo dell’Istituto Nazionale di Geofisica e Vulcanologia

    Durante il mese di ottobre 2014 si è svolta nel Mar Ionio una campagna oceanografica franco-tedesca denominata DIONYSUS, acronimo di “Deep structure of the IONian sea and east sicilY : wide-angle seismic SUrvey ofthe calabria Subduction zone and tethys margins”, organizzata dal personale degli Istituti francesi del Laboratoire Domaines Océaniques1 (LDO) dell’Institut Universitaire Européen de la Mer2 (IUEM) e dell’  3 (Ifremer) e tedeschi di GEOMAR ha contribuito anche l’Istituto Nazionale di Geofisica e Vulcanologia (INGV) nella fase propositiva del progetto e in seguito nella realizzazione della campagna sismica per la parte di acquisizione a terra. Lo scopo della crociera DIONYSUS era di condurre un’indagine dettagliata del margine attivo del sud Italia, tra la Calabria e la Sicilia Orientale, una regione colpita più volte da terremoti e tsunami distruttivi; tra tutti ricordiamo il devastante terremoto del 1908 a Messina. L’esperimento era finalizzato all’acquisizione di profili sismici a rifrazione/riflessione a grande angolo nel Mare Ionio meridionale per l’imaging della crosta profonda e della Moho lungo il prisma di accrezione calabro e la Scarpata Ibleo-Maltese. In questo rapporto tecnico, dopo un breve riferimento relativo al progetto DIONYSUS, verrà descritto con maggior dettaglio il coinvolgimento dell’INGV, dalla fase di preparazione e realizzazione della campagna sismica a terra svoltasi in sinergia con i colleghi francesi e tedeschi sino alla predisposizione e la distribuzione del dataset acquisito. Per maggiori dettagli relativi al progetto, alla campagna sismica e ai primi risultati preliminari, consigliamo di riferirsi al rapporto dedicato della crociera “M111” [Kopp et al., 2014]. Vista la collaborazione con altri istituti di ricerca stranieri, in allegato è riportato in inglese un breve riassunto del lavoro e le schede stazioni.
      1131  205
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Frequencies identification from ambient vibration data in a masonry heritage building

    In this paper, we applied an Horizontal to Vertical (HV) spectral ratio analysis to ambient vibration data aiming at the preliminary seismic response identification of a masonry building, characterized by a significant complexity in terms of geometry and elevation. The building is monitored in the aim of the PON01-02710 MASSIMO project. We performed other standard Fourier analyses computing the Power Spectral density (PSD) and the Cross-Power Spectral Density (CPSD) of the signals. The obtained results demonstrates how HV may be very useful for a rapid screening of buildings in those complex cases such as structures belonging to the cultural heritages, and we concluded that noise measurements may indeed contribute to a detailed real dynamic response definition of a system. However, another main objective of this study is the integration of the results obtained by means of the classical aforementioned Fourier analysis techniques with those coming from the application of time-frequencies analyses: the Short-Time Fourier Transform (STFT) and the complex wavelet transform (CWT) which uses the modified complex Morlet function. In fact, there are few case studies of joint application of these different techniques to masonry heritages. Thus, the study provides the opportunity for integrating them and primarily, for exploring capabilities of wavelet transform in Structural Health Monitoring (SHM).
      309  69
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Continuous gravity and tilt observations in an active geodynamic area of southern Italy: the Calabrian Arc system

    (2015-03) ; ; ; ;
    Albano, A.; Università della Calabria
    Calabria (southern Italy) is a site of considerable seismic activity related to the ongoing evolution of the Calabrian Arc system, where a complex lithospheric structure is present. For over a century the Calabrian region has been going through a period of relative seismic quietness, yet its seismic hazard is at the highest levels in the Mediterranean basin due to several catastrophic earthquakes present in the historical records. In order to strengthen the geophysical monitoring of this region, a gravity and tilt recording station was set up in the premises of the University of Calabria. The recorded signals should allow to estimate a tidal anomaly, possibly correlated with the difference between some local feature of the lithosphere or geodynamic activity and the corresponding characteristics of the model used to calculate the reference gravity tide. We report here on the results obtained by the analysis of more than two years of continuous gravity and tilt observations at a site in the northern part of the region. The tidal analysis of the gravity records, covering the time interval May 2011 - September 2013, has provided amplitudes, amplification factors and phases of the main lunar and solar gravity tidal waves. A reliable model of the gravity tide is necessary for accurate processing of discrete absolute and relative gravimetric measurements and to detect in the gravity signals possible components correlated to major seismic activity. The Ocean Tide Load (OTL) effect was accounted for in the determination of the tidal field spectral parameters. The most widespread DDW99/ NH Earth’s model, adopted here as reference, fits the obtained results well enough. The tidal residual vectors do not highlight any significant anomaly ascribable to the complex structure of the lithosphere beneath the region. The analysis of the tilt records points out a manifest influence of the fluctuations of the air temperature on ground slope, at annual and diurnal periods. The spectral analysis highlights the presence, on both E-W and N-S components, of a significant S1 solar wave. Values of the thermal admittance, at diurnal period, have been estimated for both tilt components. A weak energy at the frequency of 1.932 cycles/day, at the limit of statistical significance, is also observed, identifiable as the main semidiurnal lunar wave M2 of the crustal tide. The amplitude and the amplification factors of such a wave are consistent with the values expected by the DDW99/NH model. Beyond everything, the obtained results of the analyses of gravity and tilt records have provided models for the gravity tide and tidal field in the Calabrian region. Moreover, it turns out that the response of the complex lithospheric structure in the Calabrian Arc system to the tidal stress field does not produce any significant anomaly related to the adopted model. Moreover, the absolute measurements of the gravity acceleration, carried out in 1994 and 2013, yielded coinciding values, implying that during the time interval of 20 years not any significant vertical movement and/or mass redistribution in the underground occurred in the area, despite its intense geodynamic activity.
      266  215
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    The February 2014 Cephalonia Earthquake (Greece): 3D Deformation Field and Source Modeling from Multiple SAR Techniques

    On 26 January 2014 at 13:55 UTC, an Mw 6.0 earthquake struck the island of Cephalonia, Greece, followed five hours later by an Mw 5.3 aftershock and by an Mw 5.9 event on 3 February 2014 at 03:08 UTC (National Observatory of Athens, Institute of Geodynamics [NOA-GI]). The epicenter of theMw 6.0 event was relocated 2 km east of the town of Lixouri, and that of the Mw 5.9 event at the tip of the Gulf of Argostoli, in the northern part of the Paliki peninsula (Fig. 1; Karastathis et al., 2014; Papadopoulos et al., 2014). Extensive structural damage and widespread environmental effects were induced throughout the Paliki peninsula and along the eastern coast of the Gulf of Argostoli (Valkaniotis et al., 2014). Quays, sidewalks, and piers were damaged in the waterfront areas of the towns of Lixouri and Argostoli, the island capital, and liquefactions, road failures, rock falls, and small landslides were observed.Most of the latter effects took place in the aftermath of the 26 January 2014 event and were reactivated one week later by the 3 February earthquake. In this paper, we derive the 3D surface deformation field associated with the 3 February 2014Mw 5.9 event based on the application of three different measurement techniques to Synthetic Aperture Radar (SAR) acquisitions from the Italian Space Agency (Agenzia Spaziale Italiana [ASI]) COSMO– SkyMed satellites and the German Aerospace Center (Deutsches Zentrum für Luft- und Raumfahrt, DLR) Tan- DEM-X satellite. We then model the main seismic sources and their associated slip distributions, comparing the latter with improved hypocenter relocations, which allows us to speculate on the possible rupture mechanism. Finally, we discuss the contribution of our findings to the characterization of the seismogenic sources of this region.
      512  23
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Active normal faulting and large-scale mass wasting in urban areas: the San Gregorio village case study (L’Aquila, central Italy). Methodological insight for seismic microzonation studies.

    The 2009 L’Aquila earthquake determined ground cracks in the area of San Gre- gorio, along a normal fault branch NW-SE trending and SW dipping. We dug two paleoseismological trenches across the fault to investigate its Late Quaternary ac- tivity and to verify whether the co-seismic ground ruptures could be effectively re- lated to the fault activation. The trenches showed that, in the past few millennia, the fault branch was responsible for surface displacement much larger than that determined by the 2009 earthquake. Moreover, geological/geomorphological field survey de-fined that the central portion of the structure is utilised in its shallowest portion as sliding plane of a large-scale gravitational mass movement. In particular, one of the paleoseismological trenches revealed that the large scale mass wasting is probably characterised by both continuous displacement and abrupt events of movement. Seismological investigations defined small amplification on rock site along the investigated fault, to be likely related to the joint and fracture condition deter-mined by the fault activity.
      253  21
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Evidence of active subsidence at Basiluzzo island (Aeolian islands, southern Italy) inferred from a Roman age wharf

    (2014) ; ; ;
    Anzidei, M.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione CNT, Roma, Italia
    ;
    Esposito, A.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione CNT, Roma, Italia
    The Aeolian Arc (Southern Tyrrhenian Sea, Italy) is one of the most active volcanic areas of the Mediterranean basin, affected by volcanic/hydrothermal and seismic activity. Ancient populations settled this region since historical times, building coastal installations which currently are valuable archaeological indicators of relative sea level changes and vertical land movements. In this study we show and discuss data on the relative sea level change estimated from a submerged wharf of Roman age dated between 50 B.C. and 50 A.D., located at Basiluzzo Island. This structure has been studied through marine surveys and archaeological interpretations and is presently located at a corrected depth of 4.10 0.2 m. We explain this submergence by a cumulative effect of the relative sea level change caused by the regional glaciohydro- isostatic signal, active since the end of the last glacial maximum, and the local volcano-tectonic land subsidence. Finally, a total subsidence rate of 2.05 0.1 mm/yr 1, with a volcano-tectonic contribution of 1.43 0.1 mm/yr 1 for the last 2 ka BP, is inferred from the comparison against the latest predicted sea level curve for the Southern Tyrrhenian Sea, suggesting new evaluations of the volcanotectonic hazard for this area of the Aeolian islands.
      377  735