Moro, Marco
Preferred name
Moro, Marco
Email
marco.moro@ingv.it
Staff
staff
ORCID
91 results
Filters
Settings
The search returned 91 results
Now showing 1 - 10 of 91
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Anthropogenic subsidence along railway and road infrastructures in Northern Italy highlighted by Cosmo-SkyMed satellite data
We use X-band Cosmo-SkyMed InSAR data to highlight several subsidence phenomena resting on some railway and road infrastructures in Lombardia region, Northern Italy, mainly induced by anthropogenic activities. We show eight case studies, namely “Como,” Erba, Oggiono, Valmadrera, Olginate, Verduggio, Melzo, and San Giuliano M., where we detect local subsidence effects affecting several railway and highway lines with deformation rates of about 5 mm/year. The geological features of this part of Italy and the large presence of industrial areas in the surrounding of Milano, Lecco, and Como cities lead to such phenomena. The stability and security of the nested road and railway network could be affected by these surface deformation fields. To guarantee the safety of people, continuous maintenance of the condition of railways and roads together with the monitoring of the conditions of the lands on which they rest on should be done.453 133 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Active faults in the epicentral and mesoseismal Ml 6.0 24, 2016 Amatrice earthquake region, central Italy. Methodological and seismotectonic issues
The August 24, 2016 Amatrice earthquake (Ml 6.0) struck a region of the central Apennines (Italy) where several active faults were known since decades, most of which are considered the surface expression of seismogenic sources potentially able to rupture during earthquakes with M of up to 6.5-7. The current de-bate on which structure/s activated during the mainshock and the possibility that conterminous faults may activate in a near future urged us gathering all the data on surface geological evidence of fault activi-ty we collected over the past 15-20 years in the area. We then map the main tectonic structures of the 2016 earthquake epicentral and mesoseismal region. Our aim is to provide hints on their seismogenic potential, as possible contribution to the national Database of Individual Seismogenic Source (DISS) and to the Da-tabase of the active and capable fault ITaly HAzard from CApable faults (ITHACA).181 117 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Liquefaction phenomena associated with the Emilia earthquake sequence of May-June 2012 (Northern Italy)
(2013) ;Emergeo, Working Group; ; ; In this paper we present the geological effects induced by the 2012 Emilia seismic sequence in the Po plain. Extensive liquefaction phenomena were observed over an area of ~1200 km2 following the May 20, Ml 5.9 and May 29, Ml 5.8 mainshocks, both occurred on about E-W trending, S dipping blind thrust faults. We collected the coseismic geological evidence through field and aerial surveys, reports from local people and web-based survey. On the basis of their morphologic and structural characteristics we grouped the 1362 effects surveyed into three main categories: liquefaction (485), fractures with liquefaction (768), fractures (109). We show that the quite uneven distribution of liquefaction effects, that appear concentrated and aligned, is mostly controlled by the presence of paleo-river beds, out-flow channels and fans of the main rivers crossing the area; these terrains are characterized by the pervasive presence of sandy layers in the uppermost 5 m, a local feature that, along with the presence of a high water table, greatly favours liquefaction. We also find that the maximum distance of observed liquefaction from the earthquake epicentre is ~30 km, in agreement with the regional empirical relations available for the Italian Peninsula. Finally, we observe that the contour of the liquefaction observations has an elongated shape almost coinciding with the aftershock area, the InSAR deformation area, and the I≥6 EMS area. This observation confirms the control of the earthquake source on the liquefaction distribution, and provides useful hints in the perspective of the characterization of the seismogenic source responsible for historical and pre-historical liquefactions.1792 745 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Three-dimensional numerical simulation of the interseismic and coseismic phases associated with the 6 April 2009, Mw 6.3 L'Aquila earthquake (Central Italy)
Although several observations have been reported in the literature before a strong earthquake, their relation with the forthcoming event is often controversial. Since many physical processes and parameters govern the dynamics of preparation, initiation, and occurrence of earthquakes, their understanding is essential for explaining anomalous seismological, geophysical, hydrological and geodetic signals before a strong earthquake that may be considered for seismic monitoring and hazard assessment. In this work, the interseismic and coseismic stress and strain fields associated with the 6 April 2009, Mw 6.3 L’Aquila earthquake are calculated via a 3D numerical model designed to simulate the crustal interseismic loading and the coseismic brittle episodic dislocation along the fault. The model adopts a framework of gravitational and tectonic forces that are compatible with the geodynamics of the Central Apennines region of the Italian territory. The model assumes a brittle upper crust, where the fault has stick-slip behaviour, and a plastic deeper crust, where the fault is in stationary creep. The results indicate that the concurrent action of gravitational and tectonic forces determines steep inter- seismic stress gradients at the transition between the creeping and locked fault planes that promote the coseismic subsidence of the hanging wall. The interseismic strain above the transition between that locked upper fault and its unlocked lower shear zone develops a dilated volume in the hanging wall and a contracted volume in the footwall. These stress and strain variations are compatible with seismological, geophysical and geodetic anomalies observed before the earthquake, i.e., Vp/Vs anomalies and location of foreshocks. Interseismic stress and strain patterns invert during the coseismic stage. The dilated volume, formed during the interseismic phase, will be contracted at the coseismic stage and, conversely, the footwall volume previously contracted will be expanded.324 65 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Local pattern of stress field and seismogenic sources in the Pergola-Melandro basin and the Agri valley (Southern Italy)
Our study area is a ~50 km long section of the central-southern Apennines tectonic belt that includes the Pergola-Melandro basin and the Agri valley. This region is located between the areas interested by the 1980 Ms=6.9 Irpinia and the 1857 M=7.0 Val d’Agri earthquakes and is characterized by rare historical events and very low and sparse background seismicity. In this study we provide new seismological and geophysical information to identify the characteristics of the seismotectonics in the area, as the prevailing faulting mechanism and the fit of local to regional stress field. These data concern focal mechanisms from waveform modeling and P-wave polarities, analyses of borehole breakouts and detailed investigation of two seismic sequences. All the data cover a significantly broad range of magnitudes and depths and suggest that no important local variation in stress orientation seems to affect this area, which shows a NE-SW direction of extension consistent with that regionally observed in Southern Italy. Such local homogeneity in the stress field pattern is peculiar of the study area; the variations of orientation and/or type of stress observed in the northern Apennines or only less than 100 km toward the northwest within the same tectonic belt are absent here. Furthermore, there is a suggestion for a northeastward sense of dip of the seismogenic faults in the region, an interesting constraint to the characterization of seismic sources91 113 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The March 11th, 2011, M 9.0 earthquake offshore Honshu island (Japan): a synthesis of the Tohoku-Oki INGV Team research activities
(2013-01-01); ; ; ; On March 11th, 2011 (at 05:46:23 UTC) a megaearthquake (M 9.0) occurred near the NE coast of Honshu island ( Japan), originated near the subduction plate boundary between the Pacific and the North America plates. The epicenter has been located at about 130 km East of Sendai city, at a depth of about 32 km. This seismic event has been followed by a devastating tsunami. The location, the geometric parameters, the focal mechanism, are in agreement with the occurrence of the earthquake along the subduction plate boundary. The initial seismological analysis indicated that a surface of about 300 km x 150 km over the fault moved upwards of 30-40 m. The Tohoku-Oki INGV Team has made available a wide and multisciplinary expertise to investigate the different scientific issues concerning the earthquake. Indeed from Seismology to Geomorphology, from Remote Sensing to GPS, from Tsunami to Source Modeling the INGV Team has completed a wide range of analysis, obtaining relevant outcomes that are summarized in this work.1364 231 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Cosesimic liquefaction phenomena from DInSAR after the May 20, 2012 Emilia earthquake
In this paper, we have investigated the capability of Differential Interferometry Synthetic Aperture Radar (DInSAR) technique to detect the ground effects induced by liquefaction phenomena occurred during the May 20, 2012 Emilia earthquake. To this aim, a set of COSMO-SkyMed (CSK) SAR images covering the coseismic phase has been used. The detected surface effects have been related to liquefaction of deep sandy layers. Thanks to the geological/geotechnical data in the area and a liquefaction susceptibility analysis of the subsoil, it has been identified a sandy layer between 9 and 13 m in deep, which probably liquefied during the earthquake. The estimated vertical displacements due to liquefaction are comparable with the values measured by DInSAR.86 1 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Performance Evaluation of Different SAR-Based Techniques on the 2019 Ridgecrest Sequence
We evaluated the performances of different SAR-based techniques by analyzing the surface coseismic displacement related to the 2019 Ridgecrest seismic sequence (an Mw 6.4 foreshock on July 4th and an Mw 7.1 mainshock on July 6th) in the tectonic framework of the eastern California shear zone (Southern California, USA). To this end, we compared and validated the retrieved SAR-based coseismic displacement with the one estimated by a dense GNSS network, extensively covering the study area. All the SAR-based techniques constrained the surface fault rupture well; however, in comparison with the GNSS-based coseismic displacement, some significant differences were observed. InSAR data showed better performance than MAI and POT data by factors of about two and three, respectively, therefore confirming that InSAR is the most consolidated technique to map surface coseismic displacements. However, MAI and POT data made it possible to better constrain the azimuth displacement and to retrieve the surface rupture trace. Therefore, for cases of strike-slip earthquakes, all the techniques should be exploited to achieve a full synoptic view of the coseismic displacement field.252 83 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Surface ruptures following the 30 October 2016 Mw 6.5 Norcia earthquake, central Italy
We present a 1:25,000 scale map of the coseismic surface ruptures following the 30 October 2016 M-w 6.5 Norcia normal-faulting earthquake, central Italy. Detailed rupture mapping is based on almost 11,000 oblique photographs taken from helicopter flights, that has been verified and integrated with field data (>7000 measurements). Thanks to the common efforts of the Open EMERGEO Working Group (130 people, 25 research institutions and universities from Europe), we were able to document a complex surface faulting pattern with a dominant strike of N135 degrees-160 degrees (SW-dipping) and a subordinate strike of N320 degrees-345 degrees (NE-dipping) along about 28km of the active Mt. Vettore-Mt. Bove fault system. Geometric and kinematic characteristics of the rupture were observed and recorded along closely spaced, parallel or subparallel, overlapping or step-like synthetic and antithetic fault splays of the activated fault systems, comprising a total surface rupture length of approximately 46km when all ruptures were considered.6034 219 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Insights on the kinematics of deep-seated gravitational slope deformations along the 1915 Avezzano earthquake fault (Central Italy), from time-series DInSAR
(2009); ; ; ; Moro, M.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione CNT, Roma, ItaliaAmong the causes of deep-seated gravitational slope deformations (DGSD), the most important is relief energy, which is closely related to the intensity of the active tectonic deformations, either at the regional scale or at the scale of a single active fault. We analyzed some examples of DGSD from the Eastern border of the Fucino basin, in the Central Apennines, where extensional tectonics has been active since the late Pliocene. Photogeological and field geomorphological analysis was performed to identify landforms typically associated with DGSD, such as counterslope scarps, double crests, trenches, and bulging slopes. These features are located on a mountain range at less than 1 km from the causative fault of the 1915 Avezzano earthquake. We used the SBAS Differential SAR Interferometry technique to measure the slow movements of the surface, and calculated differential vertical and horizontal ground velocities of 2–4 mm yr−1 during the period spanning from 1992 to 2001. The quantitative information on the kinematics of the deformation provided some inferences on the different processes responsible for the evolution of the observed DGSD. The displacement time series shows non-linear deformation trends at some locations, possibly correlated with a strong meteorological event. We speculate that DGSD in this area are normally subject to slow deformation, and that sudden slip along sliding surfaces (observed in excavations) may sporadically be triggered off by extreme meteorological or seismic events. Evidence of catastrophic collapse of previous DGSD along the same mountain slope reinforce this hypothesis.406 54
