Istituto Nazionale di Geofisica e Vulcanologia, Sezione Milano-Pavia, Milano, Italia
27 results
Filters
Settings
The search returned 27 results
Now showing 1 - 10 of 27
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Holocene slip rate variability along the Pernicana fault system (Mt. Etna, Italy): Evidence from offset lava flows.
(2017); ; ; ; The eastern flank of the Mount Etna stratovolcano is affected by extension and is slowly sliding eastward into the Ionian Sea. The Pernicana fault system forms the border of the northern part of this sliding area. It consists of three E-W–oriented fault sectors that are seismically active and characterized by earthquakes up to 4.7 in magnitude (M) capable of producing ground rupture and damage located mainly along the western and central sectors, and by continuous creep on the eastern sector. A new topographic study of the central sector of the Pernicana fault system shows an overall bell-shaped profile, with maximum scarp height of 35 m in the center of the sector, and two local minima that are probably due to the complex morphological relation between fault scarp and lava flows. We determined the ages of lava flows cut by the Pernicana fault system at 12 sites using cosmogenic 3He and 40Ar/39Ar techniques in order to determine the recent slip history of the fault. From the displacementage relations, we estimate an average throw rate of ~2.5 mm/yr over the last 15 k.y. The slip rate appears to have accelerated during the last 3.5 k.y., with displacement rates of up to ~15 mm/yr, whereas between 3.5 and 15 ka, the throw rate averaged ~1 mm/yr. This increase in slip rate resulted in significant changes in seismicity rates, for instance, decreasing the mean recurrence time of M ≥ 4.7 earthquakes from ~200 to ~20 yr. Based on empirical relationships, we attribute the variation in seismic activity on the Pernicana fault system to factors intrinsic to the system that are likely related to changes in the volcanic system. These internal factors could be fault interdependencies (such as those across the Taupo Rift, New Zealand) or they could represent interactions among magmatic, tectonic, and gravitational processes (e.g., Kīlauea volcano, Hawaii). Given their effect on earthquake recurrence intervals, these interactions need to be fully assessed in seismic hazard evaluations.916 414 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , AlpArray-Italy: Site description and noise characterization
(2016-04-21); ; ; ; Within the framework of the European joint research initiative AlpArray (http://www.alparray.ethz.ch/), we de- ployed overall 20 seismic broad-band stations in Northern Italy and on two islands in the Tyrrhenian Sea (Capraia and Montecristo) during Fall-Winter 2015. All the stations, connected in real-time, were installed at sites selected according to the AlpArray Seismic Network plan: 16 temporary stations running for two to three years and 4 new permanent stations in sites already occupied by accelerometers of the INGV national network. Most temporary stations are equipped with REF TEK 130S digitizers and Nanometrics Trillium Compact 120s sensors (a couple have Nanometrics Trillium 120P and one Streckeisen STS2). For each site we describe the settings and discuss the noise levels, the site effects and the preliminary sensitivity analysis.326 135 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Ground motion observations and simulation for local earthquakes in the Campi Flegrei volcanic area
(2016-04); ; ; ; Galluzzo, D.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione OV, Napoli, ItaliaGround motion produced by low magnitude earthquakes can be used to predict peak values in high seismic risk areas where large earthquakes data are not available. In the present work 20 local earthquakes (MD[[-0.3, 2.2]) occurred in the Campi Flegrei caldera during the last decade were analyzed. We followed this strategy: empirical relations were used to calibrate synthetic modeling, accounting for the source features and wave propagation effects. Once the source and path parameters of ground motion simulation were obtained from the reference data set, we extrapolated scenarios for stronger earthquakes for which real data are not available. The procedure is structured in two steps: (1) evaluation of ground motion prediction equation for Campi Flegrei area and assessment of input parameters for the source, path and site effects in order to use the finite fault stochastic approach (EXSIM code); (2) simulation of two moderate-to-large earthquake scenarios for which only historical data or partial information are available (Mw4.2 and Mw5.4). The results show that the investigated area is characterized by high attenuation of peak amplitude and not negligible site effects. The stochastic approach has revealed a good tool to calibrate source, path and site parameters on small earthquakes and to generate large earthquake scenario. The investigated magnitude range represents a lower limit to apply the stochastic method as a calibration tool, due to the small size of involved faults (fault length around 200/300 m).683 96 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Building vulnerability and seismic risk analysis in the urban area of Mt. Etna volcano (Italy)
(2016); ; ; ; D’Amico, S.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Catania, Catania, ItaliaThe tectonic system of the eastern flank of Mt. Etna volcano (Sicily, Italy) is the source of most of the strongest earthquakes occurring in the area over the last 205 years. A total of 12 events with epicentre intensities CVIII EMS have occurred at Mt. Etna, 10 of which were located on the eastern flank. This indicates a mean recurrence time of about 20 years. This area is highly urbanised, with many villages around the volcano at altitudes up to 700 m a.s.l. The southern and eastern flanks are particularly highly populated areas, with numerous villages very close to each other. The probabilistic seismic hazard due to local faults for Mt. Etna was calculated by adopting a site approach to seismic hazard assessment. Only the site histories of local volcano-tectonic earthquakes were considered, leaving out the effects due to strong regional earthquakes that occurred in north-eastern and south-eastern Sicily. The inventory used in this application refers to residential buildings. These data were extracted from the 1991 census of the Italian National Institute of Statistics, and are grouped according to the census sections. The seismic vulnerability of the elements at risk belonging to a given building typology is described by a vulnerability index, in accordance with a damage model based on macroseismic intensities. For the estimation of economic losses due to physical damage to buildings, an integrated impact indicator was used, which is equivalent to the lost building volume. The expected annualised economic earthquake losses were evaluated both in absolute and in relative terms, and were compared with the geographical distribution of seismic hazard and with similar evaluations of losses for other regions.530 222 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , The 2013 European Seismic Hazard Model: key components and results
(2015-12); ; ; ; The 2013 European Seismic Hazard Model (ESHM13) results from a community-based probabilistic seismic hazard assessment supported by the EU-FP7 project “Seismic Hazard Harmonization in Europe” (SHARE, 2009–2013). The ESHM13 is a consistent seismic hazard model for Europe and Turkey which overcomes the limitation of national borders and includes a through quantification of the uncertainties. It is the first completed regional effort contributing to the “Global Earthquake Model” initiative. It might serve as a reference model for various applications, from earthquake preparedness to earthquake risk mitigation strategies, including the update of the European seismic regulations for building design (Eurocode 8), and thus it is useful for future safety assessment and improvement of private and public buildings. Although its results constitute a reference for Europe, they do not replace the existing national design regulations that are in place for seismic design and construction of buildings. The ESHM13 represents a significant improvement compared to previous efforts as it is based on (1) the compilation of updated and harmonised versions of the databases required for probabilistic seismic hazard assessment, (2) the adoption of standard procedures and robust methods, especially for expert elicitation and consensus building among hundreds of European experts, (3) the multi-disciplinary input from all branches of earthquake science and engineering, (4) the direct involvement of the CEN/TC250/SC8 committee in defining output specifications relevant for Eurocode 8 and (5) the accounting for epistemic uncertainties of model components and hazard results. Furthermore, enormous effort was devoted to transparently document and ensure open availability of all data, results and methods through the European Facility for Earthquake Hazard and Risk (www.efehr.org).1096 49 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Pan-European ground-motion prediction equations for the average horizontal component of PGA, PGV, and 5 %-damped PSA at spectral periods up to 3.0 s using the RESORCE dataset
This article presents a set of Ground-Motion Prediction Equations (GMPEs) for Europe and the Middle East, derived from the RESORCE strong motion data bank, following a standard regression approach. The parametric GMPEs are derived for the peak ground acceleration, peak ground velocity, and 5 %-damped pseudo-absolute acceleration response spectra computed over 23 periods between 0.02 and 3 s, considering the average horizontal-component ground-motions. The GMPEs are valid for distances less than 300 km, hypocentral depth up to 35 km and over the magnitude range 4–7.6. Two metrics for the source-to-station distance (i.e. Joyner-Boore and hypocentral) are considered. The selected dataset is composed by 2,126 recordings (at a period of 0.1 s) related to 365 earthquakes, that includes strong-motion data from 697 stations.The EC8 soil classification (four classes from A to D) discriminates recording sites and four classes (normal, reverse, strike-slip, and unspecified) describe the style of faulting. A subset which contains only stations with measured Vs30 and earthquakes with specified focal mechanism (1,224 records from 345 stations and 255 earthquakes) is used to test of the accuracy of the median prediction and the variability associated to the broader data set. A random effect regression scheme is applied and bootstrap analyses are performed to estimate the 95 % confidence levels for the parameters. The total standard deviation sigma is decomposed into between-events and within-event components, and the site-to-site component is evaluated as well. The results show that the largest contribution to the total sigma is coming from the within-event component. When analyzing the residual distributions, no significant trends are observed that can be ascribed to the earthquake type (mainshock-aftershock classification) or to the non-linear site effects. The proposed GMPEs have lower median values than global models at short periods and large distances, while are consistent with global models at long periods (T>1) s. Consistency is found with two regional models developed for Turkey and Italy, as the considered dataset is dominated by waveforms recorded in these regions.520 665 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Long-Term Disaster-Prevention Strategies Based on Education
(Springer, 2014); ; ; ; UPStrat-MAFA Outreach Working Group, .Although human behavior is the crucial factor in the degree of vulnerability and the likelihood of disasters taking place, preparedness and prevention programs are not mandatory in all countries around the world. Within the framework of UPStrat-MAFA (Urban disaster Prevention Strategies using MAcroseismic FAults), we have defined the disaster prevention strategies based on education management information and actions taken in Iceland, Portugal, Spain, and Italy. A detailed comparative study shows that compulsory school in these four participating countries is greatly unprepared with regard to hazard education, and these results are in line with worldwide studies. Moreover, when hazards are addressed, this is not done at an early age, which results in a missed chance to intervene in the noncognitive side of awareness, which decreases at later ages. To comply with the urge to take actions towards training and education at an early age, we used hands-on tools and learn-by-playing approaches in an informal learning environment. To reach the older population, the audio- visual media appears to be the best and lowest cost alternative to promote risk perception, awareness and education.193 21 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , CRISIS2008: A Flexible Tool to Perform Probabilistic Seismic Hazard Assessment
(2013-05); ; ; ; Ordaz, M.In the frame of the Italian research project INGV-DPC S2 (http://nuovoprogettoesse2.stru.polimi.it/), funded by the Dipartimento della Protezione Civile (DPC; National Civil Protection Department) within the agreement 2007-2009, a tool for probabilistic seismic hazard assessment (PSHA) was developed. The main goal of the project was to provide a flexible computational tool for PSHA; the requirements considered essential for the success of the project included: • ability to handle both stationary and non-stationary earthquake time-occurrence models; • ability to use ground-motion prediction models that are not parametric equations but probabilistic "footprints" of the intensities generated by earthquakes of known magnitude and focal characteristics. Usually, these footprints are results of ground motion simulations. Some commonly used programs (e.g., FRISK, by McGuire, 1978; SEISRISK III, by Bender and Perkins, 1987) and more recent and state-of-the-art tools (e.g. OpenSHA, by Field et al., 2003, http://www.opensha.org; OpenQuake, http://openquake.org) for PSHA were analyzed. It was decided to focus on CRISIS2007, which was already a mature and well known application (e.g., Kalyan Kumar and Dodagoudar, 2011; Teraphan et al., 2011; D’Amico et al., 2012; see also http://ecapra.org/CRISIS-2007), but also suitable for additional development and evolution since its source code is freely available on request. The computational tool resulted in an extensive redesign and renovation of the previous CRISIS2007 version. CRISIS is a computer program for PSHA, originally developed in the late 1980's using Fortran as programming language (Ordaz, 1991). In this format, still without a graphical user interface (GUI), it was distributed as part of SEISAN tools (Ottemöller et al., 2011). Ten years later, a GUI was constructed, generating what was called CRISIS99 (Ordaz, 1999). In this version, all the graphic features were written in Visual Basic, but the computation engine remained a Fortran dynamic link library. The reason for the use of mixed-language programming was that computations in Visual Basic were extremely slow. Around 2007 the program was upgraded, in view of the advantages offered by the object-oriented technologies. An object-oriented programming language was required and the natural choice was Visual Basic.Net. In the new version (called CRISIS2007), both the GUI and the computation engine were written in the same language. Finally, in the frame of the mentioned S2 project, starting from 2008, the program was split into two logical layers: core (CRISIS Core Library) and presentation (CRISIS2008). In addition, a new presentation layer was developed for accessing the same functionalities via Web (CRISISWeb). It is worth noting that CRISIS has been mainly written by people that are, at the same time, PSHA practitioners. Therefore, the development loop has been relatively short, and most of the modifications and improvements have been made to satisfy the needs of the developers themselves.1134 152 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Pianificazione e preparazione dell’emergenza. L’esercitazione a Santa Sofia (FC) del 26/30 settembre 2011: un esempio di gestione di una crisi sismica
(2013-02-04); ; ; ; Nell’ambito della convenzione vigente tra l’Istituto Nazionale di Geofisica e Vulcanologia (INGV) e l’Agenzia di Protezione Civile della Regione Emilia Romagna è stata realizzata a fine settembre del 2011 una esercitazione sul rischio sismico con l’obiettivo di valutare il livello raggiunto nelle procedure che entrambi gli Enti attivano in occasione di una emergenza a seguito di un forte terremoto. La simulazione ha interessato oltre 50 unità di personale INGV, sia in sede che in area epicentrale, appartenenti a diverse Sezioni e sedi INGV (Ancona, Arezzo, Bologna, Irpinia, Milano, Pisa e Roma). La preparazione dell’evento si è fondata sulle esperienze del passato, in primis la lunga emergenza aquilana del 2009 [Margheriti et al., 2010; 2011; Moretti et al., 2011c], con uno sguardo alle nuove esigenze sia interne che esterne (ad esempio le istanze della Protezione Civile). Nonostante gli imprevisti e gli inevitabili errori commessi a cui si aggiunga lo sforzo per mettere insieme tante differenti professionalità e per rispettare sempre al meglio il programma e gli impegni presi con i responsabili dell’Agenzia di Protezione Civile della Regione Emilia Romagna, è stato ampiamente ripagato dall’aver vissuto un’esperienza positiva non solo da un punto di vista professionale ma anche umano. Questa esercitazione si è infatti rivelata un’importante occasione per relazionarsi e confrontarsi con i colleghi solitamente lontani rendendosi conto che da ciascuno di loro è sempre possibile imparare qualcosa. Questa esperienza si è mostrata di fondamentale importanza nella gestione dell’emergenza verificatasi a maggio 2012 in Pianura Padana emiliana [Moretti et al., 2012].506 260 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Ottimizzazione delle risorse umane e finanziarie negli EPR: applicazione di metodi foresight all'Istituto Nazionale di Geofisica e Vulcanologia
(2013); ; ;Augliera, P.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Milano-Pavia, Milano, Italia ;Gomez Capera, A. A.Nel presente lavoro si effettua un tentativo di applicare le tecniche di foresight sia a livello di un Ente Pubblico di Ricerca (l’Istituto Nazionale di Geofisica e Vulcanologia, INGV) che nell’ambito di un singolo progetto. Dopo una breve descrizione dell’INGV si passano a definire, attraverso una classica SWOT analysis, le potenzialità e i possibili rischi per l’Ente. L’analisi di foresight è resa lievemente più complessa dal fatto che il 2013 rappresenta un anno di transizione per l’INGV. Tra gli aspetti più rilevanti basti ricordare che è stata completamente rivista l’organizzazione scientifica dell’ente (creazione di 3 Strutture, a livello dipartimentale e su scala nazionale, che sovrintendono le operazioni delle Sezioni scientifiche, distribuite a livello territoriale su scala regionale/locale). Sono stati inoltre rinnovati quasi tutti i direttori di Sezione e sono in fase di definizione i nuovi regolamenti che definiranno in senso stretto il funzionamento e l’organizzazione del personale dell’Ente. Solo per ricordare alcuni aspetti, nel testo sono riportati altri cambiamenti che sono previsti in questa delicata fase temporale. A questo si aggiunge inoltre uno scenario politico in continua evoluzione e una normativa sempre più vessatoria, pur se recenti decreti sembrano forse prefigurare un futuro più roseo rispetto ai precedenti periodi. Tra le varie “scuole” di foresight, in questo studio abbiamo seguito l’approccio di Popper. Non si tratta ovviamente dell’unica metodologia disponibile, ma ci è sembrata adatta per i nostri scopi. Ci è sembrato particolarmente interessante poter descrivere lo sviluppo di un progetto scientifico in una maniera un poco diversa dal solito, almeno nel nostro ambito, molto più similare a quanto si fa oramai classicamente per un oggetto di consumo, attraverso l’utilizzo di curve ad “S”.473 432
