Skip to main content
The search returned 9 results
Now showing 1 - 9 of 9
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    An algorithm for operational flood mapping from Synthetic Aperture Radar (SAR) data based on the fuzzy logic

    (2011-02-18) ; ; ; ;
    Pulvirenti, L.; Sapienza University of Rome
    An algorithm developed to map flooded areas from synthetic aperture radar imagery is presented in this paper. It is conceived to be inserted in the operational flood management system of the Italian Civil Protection and can be used in an almost automatic mode or in an interactive mode, depending on the user’s needs. The approach is based on the fuzzy logic that is used to integrate theoretical knowledge about the radar return from inundated areas taken into account by means of three electromagnetic scattering models, with simple hydraulic considerations and contextual information. This integration aims at allowing a user to cope with situations, such as the presence of vegetation in the flooded area, in which inundation mapping from satellite radars represents a difficult task. The algorithm is designed to work with radar data at L, C, and X frequency bands and employs also ancillary data, such as a land cover map and a digital elevation model. The flood mapping procedure is tested on an inundation that occurred in Albania on January 2010 using COSMO-SkyMed very high resolution X-band SAR data.
      827  1060
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Monitoring Soil Moisture in an Agricultural Test Site Using SAR Data: Design and Test of a Pre-Operational Procedure

    (2013) ; ; ; ;
    Pierdicca, N.; Sapienza University of Rome
    An algorithm for pre-operational high resolution soil moisture mapping using Synthetic Aperture Radar (SAR) data is presented. It has been conceived to be inserted in the operational weather alert system of the Italian Department of Civil Protection. The Maximum A Posteriori (MAP) probability criterion is applied to retrieve soil moisture by inverting a forward backscattering model, and ancillary data such as optical images and land cover maps are also used to identify areas in which the retrieval can be carried out. The well-established semiempirical water cloud model is adopted to correct for the effect of vegetation on SAR data. In anticipation of the use of the algorithm in an operational system, in which the SAR-derived high resolution soil moisture product can be assimilated within weather prediction models or hydrological ones, an uncertainty index is associated to each estimate. The algorithm has been tested on a dataset consisting of ground data gathered for seven years (2003–2010) on an agricultural test site in Northern Italy and radar data provided by the C-band ENVISAT/ ASAR instrument. A comparison, performed at field scale, between estimated and in situ soil moisture data has shown that, by discarding the estimates with the largest uncertainty, the correlation coefficient can exceed 0.80 and the root mean square estimation error is less than 0.05 m /m . Moreover, the uncertainty index has turned out to be fairly correlated to the actual estimation error.
      276  83
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Potential of High-resolution Detection and Retrieval of Precipitation Fields from X-band Spaceborne Synthetic Aperture Radar over land

    X-band Synthetic Aperture Radars (X-SARs), able to image the Earth’s surface at metric resolution, may provide a unique opportunity to measure rainfall over land with spatial resolution of about few hundred meters, due to the atmospheric moving-target degradation effects. This capability has become very appealing due to the recent launch of several X-SAR satellites, even though several remote sensing issues are still open. This work is devoted to: (i) explore the potential of X-band high-resolution detection and retrieval of rainfall fields from space using X-SAR signal backscattering amplitude and interferometric phase; (ii) evaluate the effects of spatial resolution degradation by precipitation and inhomogeneous beam filling when comparing to other satellite-based sensors. Our X-SAR analysis of precipitation effects has been carried out using both a TerraSAR-X (TSX) case study of Hurricane “Gustav” in 2008 over Mississippi (USA) and a COSMO-SkyMed (CSK) X-SAR case study of orographic rainfall over Central Italy in 2009. For the TSX case study the near-surface rain rate has been retrieved from the normalized radar cross section by means of a modified regression empirical algorithm (MREA). A relatively simple method to account for the geometric effect of X-SAR observation on estimated rainfall rate and firstorder volumetric effects has been developed and applied. The TSX-retrieved rain fields have been compared to those estimated from the Next Generation Weather Radar (NEXRAD) in Mobile (AL, USA). The rainfall detection capability of X-SAR has been tested on the CSK case study using the Correspondence to: F. S. Marzano (marzano@die.uniroma1.it) repeat-pass coherence response and qualitatively comparing its signature with ground-based Mt. Midia C-band radar in central Italy. A numerical simulator to represent the effect of the spatial resolution and the antenna pattern of TRMMsatellite Precipitation Radar (PR) and Microwave Imager (TMI), using high-resolution TSX-retrieved rain images, has been also set up in order to evaluate the rainfall beam filling phenomenon. As expected, the spatial average can modify the statistics of the high-resolution precipitation fields, strongly reducing its dynamics in a way non-linearly dependent on the rain rate local average value.
      211  336
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Flood monitoring using multi-temporal COSMO-SkyMed data: Image segmentation and signature interpretation

    The COSMO-SkyMed mission offers a unique opportunity to obtain radar data characterized by short revisit time, thus being useful for flood evolution mapping. A procedure to monitor an inundation event using multitemporal COSMO-SkyMed data is presented in this paper. The methodology is based on an automatic image segmentation technique and on the use of a well-established electromagnetic model to correctly explain the radar return from the image segments. It is applied to a series of five COSMO-SkyMed images regarding an event chosen as a test bed, i.e., a flood occurred in Northern Italy in 2009. In order to associate the segments to the classes of flooded or non-flooded areas, some reference multi-temporal backscattering trends have been assumed with the aid of the theoretical model. Using these reference trends as a training set, a classification algorithm has been developed to generate a map of the flood evolution. Although the methodology needs to be further tested on different case studies, our investigation demonstrates the feasibility and the utility of a combined use of an electromagnetic scattering model and an advanced image processing technique for inundation monitoring.
      141  44
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Transponder calibration of the Envisat RA-2 altimeter Ku band sigma naught

    Although the history of spaceborne altimeters goes back to the early seventies, the absolute calibration of the backscattering coefficient has never been deeply investigated. This information has been primarily used to infer the wind speed via an empirical model, and the intercalibration among different satellite altimeters has revealed to be suitable for this purpose, being the wind retrieval based on an empirical relationship. As far as Ku band system is concerned, the sigma naught absolute calibration of the Envisat altimeter (RA-2) has been performed using an active reference target provided by a transponder. This has been exploited during the 6-month Commissioning phase to generate early calibration results. In order to monitor the RA-2 backscatter calibration during the Envisat lifetime, a continuous calibration effort has been carried out by operating the transponder as much as possible. This paper aims to review the entire effort for calibrating the RA-2 sigma naught measurements, which lasted for almost seven years. It presents in detail the adopted methodology and the final outcome of the activity, providing the users with the correction (bias) to get the calibrated sigma naught and analyzing its stability during almost the entire Envisat lifetime. Specifically, it is concluded that the RA-2 backscatter measurements were quite stable, even if a bias of about 1 dB should be considered with respect to the actually released product. Some small changes in the bias as function of time can be identified during most of the Envisat lifetime, consisting in a slight increase in the first two years, followed by a more stable period and a final drop observed at the end of 2009, until the conclusion of the calibration activity (corresponding to the change in Envisat orbit).
      153  24
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Understanding the Origin and Mixing of Deep Fluids in Shallow Aquifers and Possible Implications for Crustal Deformation Studies: San Vittorino Plain, Central Apennines

    Expanding knowledge about the origin and mixing of deep fluids and the water–rock–gas interactions in aquifer systems can represent an improvement in the comprehension of crustal deformation processes. An analysis of the deep and meteoric fluid contributions to a regional groundwater circulation model in an active seismic area has been carried out. We performed two hydrogeochemical screenings of 15 springs in the San Vittorino Plain (central Italy). Furthermore, we updated the San Vittorino Plain structural setting with a new geological map and cross-sections, highlighting how and where the aquifers are intersected by faults. The application of Na-Li geothermometers, coupled with trace element and gas analyses, agrees in attributing the highest temperatures (>150 C), the greatest enrichments in Li (124.3 ppb) and Cs (>5 ppb), and traces of mantle-derived He (1–2%) to springs located in correspondence with high-angle faults (i.e., S5, S11, S13, and S15). This evidence points out the role of faults acting as vehicles for deep fluids into regional carbonate aquifers. These results highlight the criteria for identifying the most suitable sites for monitoring variations in groundwater geochemistry due to the uprising of deep fluids modulated by fault activity to be further correlated with crustal deformation and possibly with seismicity.
      155  58
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Comparing statistical and neural network methods applied to very high resolution satellite images showing changes in man-made structures at Rocky Flats

    Parametric and nonparametric approaches to evaluate land-cover change detection using very high resolution (VHR) satellite imagery are applied to the analysis of the demolition of the Rocky Flats nuclear weapons facility located near Denver, CO. Both maximum-likelihood and neural network classifiers are used to validate a new parallel architecture which improves the accuracy when applied to VHR satellite imagery for the study of land-cover change between sequential satellite acquisitions. An enhancement of about 14% was found between the single-step classification and the new parallel architecture, confirming the advantage and the robust improvement obtained with this architecture regardless of the classification algorithm used. In this paper, we demonstrate and document the demolition and removal of hundreds of buildings taken down to bare soil between 2003 and 2005 at the Rocky Flats site.
      186  29
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Exploiting SAR and VHR optical images to quantify damage caused by the 2003 Bam earthquake

    (2009-01) ; ; ;
    Chini, M.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione CNT, Roma, Italia
    ;
    Pierdicca, N.; Sapienza University of Rome
    Using satellite sensors to detect urban damage and other surface changes due to earthquakes is gaining increasing interest. Optical images at different resolutions and radar images represent useful tools for this application, particularly when more frequent revisit times will be available with the implementation of new missions and future possible constellations of satellites. Very high resolution (VHR) images (on the order of 1 m or less) may provide information at the scale of a single building, whereas images at resolutions on the order of tens of meters may give indications of damage levels at a district scale. Both types of information may be extremely important if provided with sufficient timeliness to rescue teams. The earthquake that hit the city of Bam, Iran, has been taken as a test case, where QuickBird VHR optical images and advanced synthetic aperture radar data were available both before and after the event. Methods to process these data in order to detect damage and to extract features used to estimate damage levels are investigated in this paper, pointing out the significant potential of these satellite data and their possible synergy.
      217  34
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Coseismic liquefaction phenomenon analysis by COSMO-SkyMed : 2012 Emilia ( Italy ) earthquake

    The liquefaction phenomenon that occurred in the coseismic phase of th eMay 20,2012 Emilia(Italy) earthquake (ML5.9) is investigated. It was induced by the water pressure increase in the buried and confined sand layers.The level-ground liquefactionwastheresultofachaoticgroundoscillationcaused by theearthquakeshakingandtheobservedfailureswereduetotheupwardwaterflowcausedby the excessofporepressures.Weexploitedthecapabilityofthedifferentialsyntheticapertureradar interferometry (DInSAR)techniquetodetectsoilliquefactionsandestimatetheirsurfacedisplacements, as wellasthehighsensitivitytosurfacechangesofcomplexcoherence,SARbackscatteringandintensity correlation. Tothisaim,asetoffourCOSMO-SkyMedX-bandSARimages,coveringtheperiodApril 1–June 6,2012,wasused.Geological–geotechnicalanalysiswasalsoperformedinordertoascertainif the detectedSAR-basedsurfaceeffectscouldbeduetothecompactioninducedbyliquefactionofdeep sandy layers.Inthisregards,theresultsobtainedfrom13electricalconepenetrometertestsshowthe presence ofafinetomediumsandylayeratdepths,rangingbetween9and13m,whichprobablyliquefied during theearthquake,inducingverticaldisplacementsbetween3and16cm.Thequantitativeresults from geological–geotechnicalanalysisandthesurfacepunctualeffectsmeasuredbyDInSARareingood agreement, evenifsomedifferencesarepresent,probablyascribabletothelocalthicknessanddepth variability ofthesandylayer,ortolackofdeformationdetectionduetoDInSARdecorrelation.Theadopted approach permittedustodefinetheextentoftheareasthatunderwentliquefactionandtoquantifythe local subsidencerelatedtothesephenomena.Thelatterachievementprovidesusefulinformationthat must beconsideredinengineeringpractices,intermsofexpectedverticaldeformations.
      227  42