Istituto Nazionale di Oceanografia e Geofisica Sperimentale
4 results
Filters
Settings
The search returned 4 results
Now showing 1 - 4 of 4
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Testing the improvement of ShakeMaps using f inite-f ault models and synthetic seismograms
(2010-09-06); ; ; ; ShakeMap package uses empirical ground motion prediction equations (GM PEs) to estimate the ground motion where recorded data are not available. Recorded and estimated values are then interpolated in order to produce a shaking map associated to the considered event. Anyway GMPEs account only for average characteristics of source and wave propagation processes. Within the framework of the DPC-INGV S3 project (2007-09), we evaluate whether the inclusion of directivity effects in GMPEs (companion paper Spagnuolo et al., 2010) or the use of synthetic seismograms from finite-fault rupture models may improve the ShakeMap evaluation. An advantage of using simulated motions from kinematic rupture models is that source effects, as rupture directivity, are directly included in the synthetics. This is particularly interesting in Italy where the regional GMPEs, based on a few number of near-source records for moderate-to-large earthquakes, are not reliable for estimating ground motion in the vicinity of the source. In this work we investigated how and if the synthetic seismograms generated with finite-fault models can be used in place of (or in addition to) GMPEs within the ShakeMap methodology. We assumed a description of the rupture model with gradually increasing details, from a simple point source to a kinematic rupture history obtained from inversion of strong-motion data. According to the available information synthetic seismograms are calculated with methods that account for the different degree of approximation in source properties. We chose the M w 6.9 2008 Iwate-M iyagi (Japan) earthquake as a case study. This earthquake has been recorded by a very large number of stations and the corresponding ShakeMap relies almost totally on the recorded ground motions. Starting from this ideal case, we removed a number of stations in order to evaluate the deviations from the reference map and the sensitivity of the map to the number of stations used. The removed data are then substituted with synthetic values calculated assuming different source approximations, and the resulting maps are compared to the original ones (containing observed data only). The use of synthetic seismograms computed for finite-fault rupture models produces, in general, an improvement of the calculated ShakeMaps, especially when synthetics are used to integrate real data. When real data are not available and ShakeMap is estimated using GMPEs only, the improvement adding simulated values depends on the considered strong-motion parameters.154 207 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Probabilistic seismic hazard at Mt. Etna (Italy): The contribution of local fault activity in mid-term assessment
(2013); ; ; ; Azzaro, R.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Catania, Catania, ItaliaIn this work, we tackle the problem of seismic hazard at Etna deriving from the recurrent seismogenic activity of local faults, by adopting two independent methods based on probabilistic approaches. We assess the hazard in terms of macroseismic intensity and represent the occurrence probability calculated for different exposure times both on maps and at fault scale. Seismic hazard maps obtained by applying the “site approach” through the SASHA code and a new probabilistic attenuation model, indicate the eastern flank of the volcano as the most hazardous, with expected intensity (Iexp) in 50 years (i.e. the standard exposure time adopted in the seismic regulations) ranging from degrees IX to X EMS. In shorter exposure periods (20, 10, 5 years), values of Iexp up to IX are also reached in the same area, but they are clearly determined by the earthquakes generated by the Timpe fault system. In order to quantify the contribution of local seismogenic sources to the hazard of the region, we reconstruct the seismic history of each fault and calculate with SASHA the probability that earthquakes of a given intensity may be generated in different exposure times. Results confirm the high level of hazard due to the S. Tecla, Moscarello and Fiandaca faults especially for earthquakes of moderate intensity, i.e. VI≤I0≤VII, with probabilities respectively exceeding 50% and 20% in 10 years, and 30% and 10% in 5 years. Occurrence probability of major events (I0≥VIII) at the fault scale has also been investigated by statistics on intertimes. Under stationary assumptions we obtain a probability of 6.8% in 5 years for each structure; by introducing the time-dependency (time elapsed since the last event occurred on each fault) through a BPT model, we identify the Moscarello and S. Tecla faults as the most probable sources to be activated in the next 5 years (2013–2017). This result may represent a useful indication to establish priority criteria for actions aimed at reducing seismic risk at a local scale.451 20 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The assessment of earthquake hazard in Italy: a review
We present a review of the assessment of earthquake hazard in Italy, with special reference to the relationships between hazard models and building codes. After early attempts at hazard assessment in the 19th century, the 28 December 1908, Messina Straits earthquake prompted the inception of the first national seismic legislation, passed in early 1909. Nevertheless, the official building code started to be based on a truly scientific background only after 1980, when the catastrophic Irpinia (southern Italy) earthquake forced the qualified authority to accept a science-based assessment (statistics on the earthquake catalogue data) to support the implementation of the new national seismic zonation. Later on, between 1985 and 2000, the two basic components of seismic haz- ard assessment, namely the earthquake record and the distribution of earthquake sources, were greatly developed through investigations carried out by the Gruppo Nazionale Difesa dai Terremoti and by the Istituto Nazionale di Geofisica. Along with the improvement of basic data, the Italian seismological community started developing a new hazard model (PS4), based on the concept of seismotectonic probabilism, aimed at supplying the Italian Government with a solid reference frame for updating the seismic zonation and building code. Nevertheless, this goal was achieved only two decades later: on 31 October 2002 a moderate-size earthquake caused the death of 27 children and a teacher in a collapsed school of southern Italy, forcing the qualified authority to take a major step of modernization for the second time in 22 years. The entire Italian territory, including areas of rare and sparse seismicity, was subdivided into four seismic zones, mainly on the basis of PS4 results. In 2004, the Italian seismological community developed MPS04, a fully updated hazard model that was initially conceived only in view of updating the seismic zonation. In 2007, MPS04 was extended to provide design spectra for a new building code, which was finally adopted in 2009, following the disastrous L’Aquila (central Italy) earthquake. The experience of the European project for seismic hazard assessment named SHARE, completed in 2013, represented a step forward and put the basis for a new project, termed MPS19, designed specifically to provide a sound basis for updating the Italian building code.186 317 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Hydro-acoustic signals from the Panarea shallow hydrothermal field: new inferences of a direct link with Stromboli
(Geological society of London, 2021); ; ; ; We present the results from a mid-term monitoring activity carried out at the submarine hydrothermal system located off Panarea Island (Aeolian Islands, Italy). The collected data concern multiparametric information from a self-operating seafloor station (acoustics and chemical–physical parameters) acquiring data at regular intervals and transmitting it twice a day in near real-time. The acoustic records were analysed with the principal aim of investigating bubbling variations related to gas flow rate. Several anomalies have been documented, in the bubbling activity detected at high frequencies (100–2000 Hz), as well as in very low acoustic frequencies, related to fluids dynamic along cracks. An astonishing correlation between soil CO2 flux emissions recorded at Stromboli craters and the acoustic signals in the 1–30 Hz range has been identified, suggesting how this tectonic link could act as an escape route for fluids characterized by a shared source.79 9
