15 results
Filters
Settings
The search returned 15 results
Now showing 1 - 10 of 15
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Influence of tectonics on global scale distribution of geological methane emissions
(2020-05-08); ; ; ; Earth's hydrocarbon degassing through gas-oil seeps, mud volcanoes and diffuse microseepage is a major natural source of methane (CH4) to the atmosphere. While carbon dioxide degassing is typically associated with extensional tectonics, volcanoes, and geothermal areas, CH4 seepage mostly occurs in petroleum-bearing sedimentary basins, but the role of tectonics in degassing is known only for some case studies at local scale. Here, we perform a global scale geospatial analysis to assess how the presence of hydrocarbon fields, basin geodynamics and the type of faults control CH4 seepage. Combining georeferenced data of global inventories of onshore seeps, faults, sedimentary basins, petroleum fields and heat flow, we find that hydrocarbon seeps prevail in petroleum fields within convergent basins with heat flow ≤ 98 mW m-2, and along any type of brittle tectonic structure, mostly in reverse fault settings. Areas potentially hosting additional seeps and microseepage are identified through a global seepage favourability model.883 107 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Mapping the geogenic radon potential and radon risk by using Empirical Bayesian Kriging regression: A case study from a volcanic area of central Italy
A detailed geochemical study on radon related to local geology was carried out in the municipality of Celleno, a little settlement located in the eastern border of the Quaternary Vulsini volcanic district (central Italy). This study included soil-gas and terrestrial gamma dose rate survey, laboratory analyses of natural radionuclides (²³⁸U, ²²⁶Ra, ²³²Th, ⁴⁰K) activity in rocks and soil samples, and indoor radon measurements carried out in selected private and public dwellings. Soil-gas radon and carbon dioxide concentrations range from 6 to 253 kBq/m³ and from 0.3 to11% v/v, respectively. Samples collected from outcropping volcanic and sedimentary rocks highlight: significant concentrations of ²³⁸U, ²²⁶Ra and ⁴⁰K for lavas (151, 150 and 1587 Bq/kg, respectively), low concentrations for tuffs (126, 123 and 987 Bq/kg, respectively), and relatively low for sedimentary rocks (108, 109 and 662 Bq/kg, respectively). Terrestrial gamma dose rate values range between 0.130 and 0.417 μSv/h, being in good accordance with the different bedrock types. Indoor radon activity ranges from 162 to 1044 Bq/m³; the calculated values of the annual effective dose varied from 4.08 and 26.31 mSv/y. Empirical Bayesian Kriging Regression (EBKR) was used to develop the Geogenic Radon Potential (GRP) map. EBKR provided accurate predictions of data on a local scale developing a spatial regression model in which soil-gas radon concentrations were considered as the response variable; several proxy variables, derived from geological, topographic and geochemical data, were used as predictors. Risk prediction map for indoor radon was tentatively produced using the Gaussian Geostatistical Simulation and a soil-indoor transfer factor was defined for a 'standard’ dwelling (i.e., a dwelling with well-defined construction properties). This approach could be successfully used in the case of homogeneous building characteristics and territory with uniform geological characteristics.102 4 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , RETRACE-3D PROJECT, a multidisciplinary approach for the construction of a 3D crustal model: first results and seismotectonic implications
(2018-11); ; ; ; The RETRACE-3D (centRal italy EarThquakes integRAted Crustal modEl) Project has been launched with the ambitious goal to build, as first result, a new, robust, 3D geological model of broad consensus of the area struck by the 2016-2018 Central Italy seismic sequence170 106 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Inquadramento geo-litologico dell’area sublacense e zone di approvvigionamento dei materiali impiegati per l’edilizia
(Miscellanea della Società Romana di Storia Patria LXV, Roma, presso la Società alla Biblioteca Vallicelliana. ISBN 978-88-97808-52-7, 2016); ; ; ; Scopo del presente lavoro è l’edizione di una carta litologica della regione Sublacence alla scala 1:250.000 tale da essere di utile supporto ad una ricerca tendente ad illustrare come l’ambiente e le risorse naturali possano aver influenzato talora in modo determinante non solo gli insediamenti umani, ma anche ogni attività edilizia, sia per quel che riguarda il materiale utilizzato, sia le modalità di costruzione e lo stile architettonico. Nell’area sublacense infatti si hanno ancora poche informazioni sul tipo di utilizzo e la provenienza dei materiali geologici impiegati nell’edilizia durante il periodo medievale. Dal punto di vista geologico, l’area si trova all’incontro di diversi ed importanti ambienti deposizionali. Tale situazione caratterizza l’area non solo per la varietà di rocce presenti in affioramento, ma anche per una estrema complessità tettonica. Nonostante queste condizioni geologiche favorevoli alla coltivazione delle rocce, la maggior difficoltà nell’identificare le possibili aree di approvvigionamento consiste nel fatto che, dalla seconda metà del ‘900, l’area è stata intensamente coltivata con l’identificazione di molti poli a livello industriale. Sebbene le numerose difficoltà legate all’individuazione di sicuri centri pre-industriali ricollegabili al solo periodo medievale, un attento rilevamento geologico ha consentito di fare quelle considerazioni, compatibilmente alla strumentazione usate dalle maestranze atte alla cavatura, per una corretta interpretazione archeometrica. Tale lavoro vuole essereun punto di partenza per caratterizzare e documentare, partendo da considerazioni puramente geologiche, possibili centri di produzione dei materiali geologici nelle diverse fasi edilizie. Inoltre sono state fatte anche delle considerazioni sui vari impieghi delle diverse rocce e delle medesime rocce, il cui utilizzo può variare a seconda delle condizioni geologiche-strutturali di rinvenimento.66 21 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Spatial Distribution of Field Physico-Chemical Parameters in the Vulcano Island (Italy) Coastal Aquifer: Volcanological and Hydrogeological Implications
(2015-06-25); ; ; ; Vulcano, the southernmost of the Aeolian island arc (Italy), is characterized by a shallow coastal aquifer resulting from the mixing of seawater, meteoric recharge and volcanogenic fluids. The aquifer has been intensively studied during the last decades, but a comprehensive hydrogeological model has never been developed due to the lack of direct information about the litho-stratigraphic columns of the wells and the depth of water bearing levels. We present and discuss here the time and spatial analysis of water table elevation, temperature and electric conductivity data, acquired during the last 20 years in 33 wells located at Vulcano Island, with the aim of developing a groundwater circulation scheme able to fit the field observations. We retrieved a circulation scheme characterized by an intricate geometry of flow paths driven by horizontal and vertical permeability variations, accounting for the strong variability of geochemical data evidenced in this area by the related scientific literature. Extending these results to a general context, particular care must be taken in approaching the study of aquifers in volcanic islands, because a strong, small spatial scale variability of the hydrogeochemical parameters is expected, and a reliable knowledge of the local conditions is required for developing successful groundwater circulation schemes.321 408 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , The Ongoing Seismic Sequence at the Pollino Mountains, Italy
(2013-11); ; ; ; A sequence of thousands of small to moderate earthquakes has been occurring since spring 2010 in the Pollino Mountains area, southern Italy, where a seismic gap was previously hypothesized by paleoseismological evidence associated with the lack of major earthquakes in historical catalogs.245 30 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Discovery of a gliding salt-detached megaslide, Calabria, Ionian Sea, Italy
(2013-09); ; ; ; Integrating seismic reflection profiles, well logs, and field evidence with GPS velocities from a network installed in Calabria, southern Italy, we have discovered that the Crotone basin is gliding toward the Ionian Sea over a buried viscous salt layer. This previously unknown megaslide (~1000 km2) is characterized by an onshore updip extensional domain and an offshore downdip toe-thrust rim. The GPS velocity from the Crotone station is significantly higher than velocities from other stations in the region and differently oriented. We ascribe at least part of the anomalous GPS velocity from the Crotone station to the seaward motion of the megaslide or part of it. From the GPS velocity and other evidence we obtain a viscosity of the buried salt layer within the known range of rock salt viscosity in nature.499 67 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Aggregation-dominated ash settling from the Eyjafjallajökull volcanic cloud illuminated by field and laboratory high-speed imaging
(2011-09); ; ; ; The recent Eyjafjallajökull (Iceland) eruption strikingly under-lined the vulnerability of a globalized society to the atmospheric dispersal of volcanic clouds from even moderate-size eruptions. Ash aggregation controls volcanic clouds dispersal by prematurely remov-ing fi ne particles from the cloud and depositing them more proxi-mally. Physical parameters of ash aggregates have been modeled and derived from ash fallout deposits of past eruptions, yet aggregate sedimentation has eluded direct measurement, limiting our ability to predict the dispersal of volcanic clouds. Here we use fi eld-based, high-speed video analysis together with laboratory experiments to provide the fi rst in situ investigation and parameterization of the physical fea-tures and settling dynamics of ash aggregates from a volcanic cloud. In May 2010, high-speed video footage was obtained of both ash par-ticles and aggregates settling from the Eyjafjallajökull volcano erup-tion cloud at a distance of 7 km from the vent; fallout samples were collected simultaneously. Experimental laboratory determinations of the density, morphology, and settling velocity of individual ash par-ticles enable their distinction from aggregates. The combination of fi eld and experimental analyses allows a full characterization of the size, settling velocity, drag coeffi cient, and density distributions of ash aggregates as well as the size distribution of their component par-ticles. We conclude that ash aggregation resulted in a tenfold increase in mass sedimentation rate from the cloud, aggravating the ash haz-ard locally and modifying cloud dispersal regionally. This study pro-vides a valuable tool for monitoring explosive eruptions, capable of providing robust input parameters for models of cloud dispersal and consequent hazard forecast481 30 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Active faulting in the Maiella massif (central Apennines, Italy)
(2010); ; ; ; The Maiella Massif is the outermost carbonate anticline of the central Apennines, and it is considered as the epicentral area of two major historical earthquakes: the 1706 (Maw = 6.60) and 1933 (Maw = 5.7) events. Geological and geomorphological surveys have defined the geometry and kinematics of the Late Pleistocene-Holocene faults in the Maiella area. These faults show mainly normal kinematics and are organised as a complex dextral en-echelon fault system. The north-eastern fault (the Palena fault) trends N110°-120° and cuts the southern sector of the Maiella Massif transversally, displacing debris deposits that have been radiocarbon dated to 36,300 ±1,300 yr BP. The southwestern fault affects the western slope of Mt. Porrara and is composed of three NNW-SS-oriented en-echelon segments, placing the Mesozoic-Cenozoic carbonate bedrock in contact with Late Pleistocene continental deposits. These normal faults of the Maiella area represent the eastern-most extensional structures of the chain. Geomorphic evidence suggests that the onset of the fault activity probably occurred more recently than along other central Apennine Quaternary faults. This supports the traditional view of an outward (eastward) propagating extensional deformation during the Pliocene-Quaternary. Moreover, the evidence of re-use of pre-existing faults in the cases investigated indicates that this migration of the extensional domain generally occurs through the reactivation of faults inherited from previous tectonic phases, the geometry for which is consistent with the present (N)NE-(S)SW direction of extension. Moreover, the structural framework appears to have been conditioned by the NNE-SSW crustal Ortona-Roccamonfina Line, the present expression of which is seen in a complex dextral oblique fault zone of Late Pliocene age (i.e., the Sangro-Volturno thrust zone). Finally, the integration of our field structural data with the subsurface data available for the on-shore Periadriatic area have allowed the identification of a more external zone (Apulian foreland) that is deformed by lateral and extensional active structures, and an inner zone east of the Maiella Massif that is affected only by the most recent buried thrusts of the chain. This evidence suggests no kinematic interactions at the upper crustal level between the active oblique faulting of the Apulian foreland and the extensional structures of the Apennine chain.241 39 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Macroarea 1 (L’Aquila Centro).
(Regione Abruzzo- Presidenza del Consiglio dei Ministri, Dipartimento della Protezione Civile, L’Aquila, 2010); ; ; ; Microzonazione della macroarea 1 (L’Aquila Centro)197 307
