Romano, Gerardo
Preferred name
Romano, Gerardo
Main Affiliation
21 results
Filters
Settings
The search returned 21 results
Now showing 1 - 10 of 21
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Seismic-electromagnetic signals from two monitoring stations in Southern Italy: Electromagnetic time series release
(2024-06) ;Ventola, Ivana; ; ; The seismic-electromagnetic phenomenon entails the generation of transient electromagnetic signals, which can be observed both simultaneously (co-seismic) and preceding (pre-seismic) a seismic wave arrival. Following the most accredited hypothesis, these signals are mainly due to electrokinetic effects, generated on microscopic scale in porous media containing electrolytic fluids. Thus, the seismic-electromagnetic signals are expected to be suitable for the detection and tracking of crustal fluids. Despite the growing interest in this phenomenon, there is a lack of freely available observational database of earthquake-related electromagnetic signals recorded at co-located seismic and magnetotelluric stations. To fill this gap, we set up two multicomponent monitoring stations in two seismically active areas of Southern Italy: the Gargano Promontory and the High Agri Valley. This work is both aimed to systematically analyse earthquake-generated seismic-electromagnetic recordings and to make the collected database accessible to the scientific community.8 93 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , An Integrated Geophysical and Unmanned Aerial Systems Surveys for Multi-Sensory, Multi-Scale and Multi-Resolution Cave Detection: The Gravaglione Site (Canale di Pirro Polje, Apulia)
Gravaglione represents one of the main swallow holes of the Canale di Pirro, low Murge, Apulia region, Italy. Here, after an intense rainstorm, a huge volume of rainwater accumulates at the surface. The drainage dynamics suggest that the Gravaglione could be part of a large, and potentially unknown, karst system. To verify this hypothesis and to acquire useful information on the possible karst environment features, an integrated aerial and geophysical multiscale and multimethod approach was applied. In particular, aerial photogrammetry, ground penetrating radar measurements and electrical resistivity tomography surveys were hence conducted and integrated to potentially detect the caves, define the subsurface volume possibly affected by karst systems and to verify the existence of links between the surficial morphology and the subsoil structure. The results provided interesting insights regarding the presence of a complex karst system extending up to 200 m b.g.l. and with a marked 3D nature. Overall, the Gravaglione case study demonstrates the geophysical approach validity and poses the basis for the development of an expeditive and low-cost high-resolution strategy for detecting and characterizing karst caves.39 85 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Reservoir Structure and Hydraulic Properties of the Campi Flegrei Geothermal System Inferred by Audiomagnetotelluric, Geochemical, and Seismicity Study
The Campi Flegrei caldera is a large volcanic complex lying in the Campanian Plain, Southern Italy. During its history the caldera experienced episodes of bradyseism and intense swarm seismicity. The mechanism leading to unrest episodes is still debated, and great efforts are ongoing to improve the knowledge of this structure and its evolution due to the high volcanic risk in such a densely populated area. Here we present a resistivity model from a two‐dimensional inversion of audiomagnetotelluric data acquired along an approximately 5.6‐km long profile crosscutting the Solfatara‐Pisciarelli district and the Agnano plain. The resistivity model shows (1) very low resistivity values confined in the first 500 m of depth both in correspondence of the Solfatara‐Pisciarelli districts and the Agnano depression; (2) a resistive plume that extends underneath the Solfatara crater down to 2,000‐ to 3,000‐m depth, and (3) an adjoining relative conductive unit eastward. We discuss the resistivity structures in a multidisciplinary framework integrating inedited geochemical and seismological observations with existing surface geology and subsurface information. The Solfatara‐Pisciarelli district and the Agnano plain, both being expression of intense hydrothermal activity, show different characteristics. Below the Solfatara‐Pisciarelli area, the shallow conductive zone is interpreted as a faulted clay cap that overlies a highly active vapor‐dominated reservoir characterized by a convective mechanism. Conversely, below the Agnano plain, a liquid phase seems to prevail in the reservoir. The spatiotemporal variations of seismicity imply a combined action of preexisting tectonic lineaments and fluid interaction between the gas/steam reservoir and the outflow zone.526 100 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Geological and geo-structural characterization of the Montemurro area (Southern Italy) inferred from audiomagnetotelluric survey
This paper presents the results obtained by an audio-magnetotelluric (AMT) survey carried out crossing the western sector of Montemurro village (Southern Italy) affected by an intense hydrogeological instability. The AMT investigation was aimed to settle the question concerning the possible prosecution toward SE of the Eastern Agri Fault System whose surficial evidences could be blinded by extensive landslides phenomena and by anthropization of the territory. The AMT profile was oriented in NE-SW direction, orthogonal to the main geological structures of the investigated area. It crossed longitudinally the area affected by instability. The AMT model provides new insights on already known faults (i.e. Montemurro Faults) and imaged their in-depth immersion thus answering to still open geological question in the investigated areas. Furthermore, the high resolution of the model allowed the imaging of the boundaries, in terms of resistivity contrast, between material affected/unaffected by the sliding dynamics or characterized by an higher water content. The results provide new knowledge about the geological and geoelectrical structures in the area. They will be fully integrated with the results of the on-going research activities in the area and will represent an additional step for the multiscale and multiparametrical characterization of the Agri Valley geological setting.103 113 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Shaking of pyroclastic cones and the formation of granular flows on their flanks: Results from laboratory experiments
(2015); ; ; ;Cagnoli, B.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Bologna, Bologna, ItaliaRomano, G. P.; La SapienzaWe have carried out laboratory experiments to study the generation of granular flows on the slopes of pyroclastic cones that are experiencing volcanic tremor or tectonic earthquakes. These experiments are inspired by the occurrence of granular flows on the flanks of Mount Vesuvius during its 1944 eruption. Our laboratory model consists of sand cones built around a vibrating tube which represents a volcanic conduit with erupting magma inside. A video camera allows the study of the granular flow inception, movement and deposition. Although the collapse of the entire cone is obtained at a specific resonance frequency, single granular flows can be generated by all the vibration frequencies (1–16 Hz) and all the vibration amplitudes (0.5–1.5 mm) that our experimental apparatus has allowed us to adopt.We believe that this is due to the fact that the energy threshold to trigger the flows is small in value. Therefore, if this is true in nature aswell, shaken pyroclastic cones are always potentially dangerous because they can easily generate flows that can strike the surrounding areas.230 61 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Geophysical multidisciplinary investigation of the structure of an unstable flank: the NE sector of Mt. Etna.
Mount Etna is characterized by a complex regional tectonics with a N-S compression related to the Africa – Europe convergence that interacts with a WNW-ESE extension associated to the Malta Escarpment. A general eastward motion is present in the eastern flank. Although the existence of these phenomena is overt, the geometry of the sliding sector is still debated. The non-uniqueness of the geophysical inverse models and the different limitations in resolution and sensitivity of each technique spurred us to undertake, in the frame of the MEDiterranean Supersites Volcanoes (MED-SUV) project, a joint interpretation of independent data in order to better constrain the results. Seismic data come from the network run by the Istituto Nazionale di Geofisica e Vulcanologia (INGV) – Osservatorio Etneo, Sezione di Catania. The relocated seismicity defines two main seismogenic volumes in the NE sector of the volcano: the first cluster is related to the known Pernicana Fault system, while the second one is located southwards, beneath the northern wall of the Valle del Bove. The resistivity models come from a MT survey carried out on the eastern flank of the volcano and consisting of thirty broad-band soundings along N-S and NW-SE oriented profiles. The resistivity modeling of MT profiles reveal three major layers in a resistive-conductive-resistive sequence. A low resistivity volume is clearly identified on the NE flank of the volcano, between The Pernicana fault and the northern wall of the Valle del Bove. Ground deformation studies (GPS and InSAR) revealed the segmentation of the unstable flank and define the NE sector as the most mobile one; this sector is perfectly bounded by the two seismic clusters and corresponds to the low resistivity volume. The sliding surface modeled by ground deformation data inversions well matches in depth with a resistivity transition and with two seismogenic layers.250 180 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Effects of Flow Volume and Grain Size on Mobility of Granular Flows of Angular Rock Fragments
(Springer, 2014); ; ;Cagnoli, B.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Roma1, Roma, Italia ;Romano, G. P.; La SapienzaLaboratory experiments have shown that the finer the grain size of granular flows of angular rock fragments (all the other features the same), the more mobile their centre of mass. This is due to the fact that the finer the grain size, the larger the number of particles in the flow so that their agitation due to the interaction with the subsurface asperities has a smaller penetration within the flow. The smaller the agitation of the particles per unit of flow mass, the smaller the energy dissipated per unit of travel distance. Also, the larger the flow volume, the smaller the mobility of its centre of mass. This is due to the fact that a deposit accretes backward during its deposition on a slope change. However, the frontal end of a larger-volume deposit is more distal than that of a smaller-volume deposit because the larger the volume, the larger its longitudinal spreading.233 51 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Vertical segregations in flows of angular rock fragments: Experimental simulations of the agitation gradient within dense geophysical flows
(2013); ; ;Cagnoli, B.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Roma1, Roma, Italia ;Romano, G. P.; Ingegneria, La SapienzaIn this paper, we illustrate laboratory experiments whose purpose is to study the vertical segregations that are commonly observed in deposits of dense geophysical flows (such as pyroclastic flows and rock avalanches). In these experiments, we use rock cuboids with 5 mm long edges as matrix and rock cuboids with 2 cm long edges as segregating clasts. A rotating disk is used to apply frictional stresses at the base of the granular masses. In our experiments, segregating cuboids with density smaller than or equal to that of the matrix particles rise whereas segregating cuboidswith density larger than that of the matrix particles sink. The granular flows are imaged through the glass container of the experimental apparatus by a high-speed video camera at 2000 fps. By means of particle image velocimetry analysis of the movies, we study the vertical gradient of particle agitation that exists within the granular flows where agitation increases downward because of the interaction with the subsurface asperities. The high-speed movies show that it is the particle agitation within the flows that exerts an upward force and that, when this force is larger than theweight of the segregating clast, the clast riseswhereas, when it is smaller, the clast sinks. The most important result in our set of experiments is that the threshold which separates the values of density of the segregating clasts that segregate upward and the values of density of the segregating clasts that segregate downward is larger than the density of the matrix particles. This explains the upward segregation of dense lithics that is frequently observed in deposits of geophysical flows. This upward segregation is due to the fact that the resultant of the collisions exerted by the matrix particles is a force strong enough to push upward also dense and heavy fragments.226 47 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Flank instability structure of Mt. Etna inferred by a magnetotelluric survey
(2012-03-30); ; ; ; This paper presents a magnetotelluric (MT) survey of the unstable eastern flank of Mt. Etna. We take thirty soundings along two profiles oriented in the N-S and NW-SE directions, and from these data recover two 2D resistivity models of the subsurface. Both models reveal three major layers in a resistive-conductive-resistive sequence, the deepest extending to 14 km bsl. The shallow layer corresponds to the volcanic cover, and the intermediate conductive layer corresponds to underlying sediments segmented by faults. These two electrical units are cut by E-W-striking faults. The third layer (basement) is interpreted as mainly pertinent to the Apennine-Maghrebian Chain associated with SW-NE-striking regional faults. The detailed shapes of the resistivity profiles clearly show that the NE Rift is shallow-rooted ( 0–1 km bsl), thus presumably fed by lateral dikes from the central volcano conduit. The NW-SE profile suggests by a series of listric faults reaching up to 3 km bsl, then becoming almost horizontal. Toward the SE, the resistive basement dramatically dips (from 3 km to 10 km bsl), in correspondence with the Timpe Fault System. Several high-conductivity zones close to the main faults suggest the presence of hydrothermal activity and fluid circulation that could enhance flank instability. Our results provide new findings about the geometry of the unstable Etna flank and its relation to faults and subsurface structures.360 43 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Granular pressure at the base of dry flows of angular rock fragments as a function of grain size and flow volume: A relationship from laboratory experiments
(2012); ; ;Cagnoli, B.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Roma1, Roma, Italia ;Romano, G. P.; Università La SapienzaExperiments are carried out by releasing angular rock fragments down a curved chute and by measuring the basal pressures that are exerted by the granular flows on the basal containing surface (the substrate). The purpose of these experiments is to understand the mechanisms of energy dissipation and interaction with the ground of rock avalanches and dense pyroclastic flows. Our data show that collisions due to particle agitation affect significantly the basal interaction of granular flows. In particular, our experiments reveal that particle agitation per unit of flow mass increases as grain size increases or as flow volume decreases (with all the other features the same). This is so because as grain size increases or as flow volume decreases (with all the other features the same), there are fewer particles in the flows and the agitation due to the interaction with the rough containing boundary surfaces penetrates relatively more inside the flows. The analysis of the experimental data generates a linear relationship between particle agitation (expressed as a dimensionless basal pressure deviation) and a parameter which is directly proportional to the square of grain size and inversely proportional to the cube root of flow volume. This relationship shows the intrinsic ability of the granular flows to dissipate more energy (larger particle agitation per unit of flow mass) or less energy (smaller particle agitation per unit of flow mass) as a function of flow volume and grain size.240 28
