Skip to main content
The search returned 13 results
Now showing 1 - 10 of 13
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Mt. Etna 2001 eruption: New insights into the magmatic feeding system and the mechanical response of the western flank from a detailed geodetic dataset

    (2014-03-15) ; ;
    Gonzalez, P.; Department of Earth Sciences, University of Western Ontario, Biological and Geological Sciences Building, London
    ;
    Palano, M.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Catania, Catania, Italia
    ;
    In the last decades, the increasing availability of comprehensive geodetic datasets has allowed for more detailed constraints on subsurface magma storage and conduits at several active volcanoes worldwide. Here, by using a large dataset of geodetic measurements collected between early January 2001 and August 2001, we identified at least six different deformation stages that allow us to quantify the surface deformation patterns before, during and after the 2001 Mt. Etna volcanic eruption. Our results are largely in agreement with previous works (e.g. the presence of a deep inflating source and a shallow dike located beneath the north-western and upper southern flanks of the volcano, respectively). However, we provide (1) finer resolution of the temporal activity of these magmatic sources, leading to (2) new evidence related to the evolution of the magmatic system and the mechanical response of the western flank, in particular during the pre-eruptive phase. Results and analysis show a clear change in the ground deformation pattern of the volcano in response to the 20–24 April 2001 seismic swarm that occurred beneath the western flank, evolving from a volcano-wide inflation to a slight deflation of the summit area. We suggest that the source responsible for the volcano-wide inflation, beginning in the fall of 2000, experienced a drastic reduction in the inflation rate in response to this seismic swarm. Moreover, we provide evidence for the presence of a new inflating source located beneath the upper southern flank at a depth of ~ 7.0 km bsl that triggered both the occurrence of the 20–24 April 2001 seismic swarm and led to the rapid ascent of magma upward to the surface after 12 July (the Lower Vents system was fed by fresh magma rising from this source). The presence of this inflating source is inferred by (1) seismological and volcanological observations coming from the 2001 eruption and (2) seismological constraints coming from a previous similar episode that occurred at Etna during the 1993–1998 period. Furthermore, both shallow deflations observed after the 20–24 April 2001 seismic swarm and during the first day of the eruption also could be due to the deflation of two adjacent portions of the same shallow (~ 2 km bsl) reservoir. Such reservoirs would feed the activity that occurred at the South-East Crater after January 2001 and the activity of the Upper Vents system during the July–August eruption, in agreement with petrochemical observations. Through an updated revision of the available data, we shed some light on the relevance of pre-eruptive activity patterns, an important element for an effective volcano monitoring.
      244  61
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Co-seismic horizontal offsets and fault trace mapping using phase correlation of IRS satellite images: the 1999 Izmit (Turkey) earthquake

    (2010-05-01) ; ; ; ;
    Gonzalez, P.; Instituto de Astronomía y Geodesia
    On August 17, 1999, a strong earthquake (Mw ≈ 7.4) occurred along the western sector of the North Anatolian Fault system in Turkey. The epicenter was located near the city of Izmit, 50 km east of Istanbul. Previous works determined the coseismic surface displacements by satellite synthetic aperture radar (SAR) interferometry (InSAR) and satellite optical-image correlation. In 1999, the highest spatial resolution orbiting camera was the panchromatic sensor (PAN), a 5.8-m pixel sensor (SPOT 2 was a 10-m pixel sensor) onboard the Indian Remote Sensing (IRS) satellite. We propose to apply a new phase-correlation method to PAN images to study the coseismic rupture due to the Izmit earthquake. The phase-correlation method does not need phase unwrapping and was proved to be robust under a wide variety of circumstances. Image correlometry deals with the quantification of the subpixel offsets over the whole image, allowing displacement measurement with an accuracy that is proportional to the pixel size. We measured the near-field deformations exploiting two geometrically corrected IRS images with similar look angles. A quality check of the derived offset map was performed by comparison with GPS benchmarks and SPOT offsets. The results show that IRS PAN images can be correlated to derive coseismic slip offsets due to a large earthquake (and to map its fault trace).
      181  27
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Strain and stress fields along the Gibraltar Orogenic Arc: constraints on active geodynamics

    (2013) ; ; ;
    Palano, M.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Catania, Catania, Italia
    ;
    González, P. J.; Department of Earth Sciences, University of Western Ontario, Biological and Geological Sciences Building, London, Ontario N6A 5B7, Canada
    The Gibraltar Orogenic Arc, in the Western Mediterranean, represents a complex region of active deformation related to the oblique Nubia-Eurasia convergence process. To increase the knowledge on the ongoing active processes in this region, we have used the most up-to-date and comprehensive geodetic crustal motion and stress fields. To this end, we analyzed both continuous and campaign-mode GPS data collected between 1999.00 and 2011.00 across the area and compiled a multidisciplinary dataset of well-constrained stress indicators to be compared with the geodetic results. The main results highlight the oblique nature of the Nubia-Eurasia convergence, which provides the largest component of the observed stress-pattern and is responsible for a significant strain-rate field along the Gibraltar Orogenic Arc. We discuss our findings with respect to available geological, seismological and geophysical data in order to verify their coherency compared to more relevant geodynamical models proposed in literature. According to previous studies, we confirmed how much of the secondary stress-pattern can be related to the gravitational potential energy field, which may also be responsible for some 2D stress - strain-rate angular discrepancies observed in large areas of the Betics. In addition, taking into account the sub-orthogonal azimuthal relationship between the SHmax and εhmin directions and the Fast Polarization Directions, we conjectured a deep dynamic process controlling both the crustal stress field and the surface deformation on large areas of the orogenic arc. Finally, although the models proposed to explain the geodynamic pattern of the Gibraltar Orogenic Arc are supported by a discrete number of geological and geophysical observations, it is only the back-arc extension and westward rollback model that is able to adequately account for the vast majority of the observations. Based on our findings and other evidences, we retain that this process could still be active beneath the Gibraltar Orogenic Arc.
      212  30
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Modelling of InSAR (LOS) changes by means of 3D extended pressured bodies with free geometry. Application to Campi Flegrei.

    (2010) ; ; ; ;
    Camacho, A.G; Inst. Astronomia y Geodesia (CSIC-UCM), Madrid
    InSAR measures can provide information about changes in distance between the ground and the satellite in radar line-of-sight (LOS) direction. Sometimes, as in the case of volcanic activity, the corresponding ground deformations can be modeled by means of pressure and/or mass sources. Usually, point sources and regular prolate or oblate bodies are used as source geometry for deformation. In this communication, we show a new method for non-linear inversion of position and gravity changes as produced by extended bodies with a free geometry. Their structures are described as aggregation of elemental sources with anomalous density and pressure, and they are modeled to fit the whole data and to keep some regularity conditions. A growth process permits to build general geometrical configurations. The method is tested by application to data of gravity and InSAR (LOS data for ascending and descending orbits) for the volcanic area of Campi Flegrei (Italy). Results are drawn with respect a structural gravimetric model and compared with previous models.
      179  170
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    The Diffuse Plate boundary of Nubia and Iberia in the Western Mediterranean: crustal deformation evidence for viscous coupling and fragmented lithosphere

    (2015-10-01) ; ; ;
    Palano, M.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Catania, Catania, Italia
    ;
    González, P. J.; COMET. Institute of Geophysics and Tectonics, School of Earth and Environment, University of Leeds, Leeds, United Kingdom
    A spatially dense GNSS-based crustal velocity field for the Iberian Peninsula and Northern Africa allow us to provide new insights into two main tectonic processes currently occurring in this area. In particular, we provide, for the first time, clear evidence for a large-scale clockwise rotation of the Iberian Peninsula with respect to stable Eurasia (Euler pole component: N42.612°, W1.833°, clockwise rotation rate of 0.07 deg/Myr). We favour the interpretation that this pattern reflects the quasi-continuous straining of the ductile lithosphere in some sectors of South and Western Iberia in response to viscous coupling of the NW Nubia and Iberian plate boundary in the Gulf of Cádiz. We furnish evidence for a fragmentation of the western Mediterranean basin into independent crustal tectonic blocks, which are delimited by inherited lithospheric shear structures. Among these blocks, an (oceanic-like western) Algerian one is currently transferring a significant fraction of the Nubia-Eurasia convergence rate into the Eastern Betics (SE Iberia) and likely causing the eastward motion of the Baleares Promontory. These processes can be mainly explained by spatially variable lithospheric plate forces imposed along the Nubia-Eurasia convergence boundary.
      214  55
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Determinación geodésica del deslizamiento de falla para el terremoto de Lorca del 11 de Mayo de 2011 usando interferometría radar y GPS

    La falla de Alhama de Murcia (FAM) está compuesta por diferentes segmentos con movimiento de desgarre siniestral con componente inversa. La FAM es una de las fallas de mayor longitud en las Béticas (sudeste de España). Así, en las últimas décadas su potencial sismogenético se ha evaluado usando principalmente datos de paleo-sismicidad. El 11 de mayo de 2011 un terremoto de magnitud momento moderada (Mw 5.1) sacudió Lorca, causando nueve muertes y cuantiosos daños materiales. La localización inicial de la secuencia de replicas no sugería ninguna tendencia en particular. Por otro lado, inspecciones geológicas realizadas in situ no identificaron ninguna fractura superficial que se pudiera asociar a deformación cosísmica. Para poder mejorar la evaluación del peligro sísmico en la zona, es necesario localizar y, si es posible, caracterizar la distribución del deslizamiento en la falla que generó este terremoto. En este trabajo presentamos deformaciones corticales pequeñas, pero significativas, medidas en la zona epicentral del terremoto de Lorca mediante el uso de técnicas geodésicas (interferometría radar de satélite y GPS). Los datos radar se procesaron obteniendo un conjunto de interferogramas diferenciales (corregidos por un hundimiento continuado debido a extracción de agua subterránea). Se han obtenido estimaciones GPS de coordenadas tanto diarias como a altas frecuencias (1-Hz). Hemos realizado una inversión conjunta de los desplazamientos cosísmicos detectados con ambas técnicas para determinar los parámetros del plano de falla, considerando un modelo de dislocación rectangular en un semiespacio elástico. El plano de falla ajustado sigue la geometría estimada geológicamente para la FAM (orientación NE-SW y buzamiento de ~70º NW). Posteriormente, a partir del modelo con deslizamiento homogéneo obtenido, el plano de falla se extiende y divide en segmentos, permitiendo un análisis más detallado del patrón de distribución de deslizamiento sobre el plano de falla. La distribución de deslizamiento obtenida indica que este ocurrió en un segmento principal de unos 4-5 km de longitud con movimiento inverso y siniestral (con una magnitud máxima de deslizamiento de ~20 cm). El modelado también indica que una parte del deslizamiento ocurrió cerca de la superficie bajo la zona central y suroeste de la ciudad de Lorca. El carácter somero del deslizamiento a lo largo del plano de falla, así como el efecto amplificador producido por la finalización de la ruptura bajo el sudoeste de la ciudad probablemente fue el causante de la relativamente alta intensidad de la aceleración registrada (~0.4g). Esta ha sido la primera vez que se ha detectado claramente deformación cosísmica producida por un terremoto en la Península Ibérica mediante el uso de técnicas geodésicas modernas (InSAR y GPS), y permitiendo invertir de forma rigurosa las características del terremoto.
      217  31
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Simultaneous inversion of surface deformation and gravity changes by means
    of extended bodies with a free geometry: Application to deforming calderas

    (2011) ; ; ; ;
    Camacho, A. G.; Instituto de Astronomía y Geodesia, CSIC‐UCM, Madrid, Spain.
    Changes in gravity and/or surface deformation are often associated with volcanic activity. Usually, bodies with simple geometry (e.g., point sources, prolate or oblate spheroids) are used to model these signals considering anomalous mass and/or pressure variations. We present a new method for the simultaneous, nonlinear inversion of gravity changes and surface deformation using bodies with a free geometry. Assuming simple homogenous elastic conditions, the method determines a general geometrical configuration of pressure and density sources. These sources are described as an aggregate of pressure and density point sources, fitting the whole data set (given some regularity conditions). The approach works in a growth step‐by‐step process that allows us to build very general geometrical configurations. The methodology is validated against an ellipsoidal body with anomalous pressure and a parallelepiped body with anomalous density, buried in an elastic medium. The simultaneous inversion of deformation and gravity values permits a good reconstruction of the assumed bodies. Finally, the inversion method is applied to the interpretation of gravity, leveling, and interferometric synthetic aperture radar (InSAR) data from the volcanic area of Campi Flegrei (Italy) for the period 1992–2000. For this period, a model with no significant mass change and an extended decreasing pressure region satisfactorily fits the data. The pressure source is located at about ∼1500 m depth, and it is interpreted as corresponding to the dynamics of the shallow (depth 1–2 km) hydrothermal system confined to the caldera fill materials.
      343  49
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Twenty-year advanced DInSAR analysis of severe land subsidence: The Alto Guadalentín Basin (Spain) case study

    A twenty-year period of severe land subsidence evolution in the Alto Guadalentín Basin (southeast Spain) is monitored using multi-sensor SAR images, processed by advanced differential interferometric synthetic aperture radar (DInSAR) techniques. The SAR images used in this study consist of four datasets acquired by ERS-1/2, ENVISAT, ALOS and COSMO-SkyMed satellites between 1992 and 2012. The integration of ground surface displacement maps retrieved for different time periods allows us to quantify up to 2.50 m of cumulated displacements that occurred between 1992 and 2012 in the Alto Guadalentín Basin. DInSAR results were locally compared with global positioning system (GPS) data available for two continuous stations located in the study area, demonstrating the high consistency of local vertical motion measurements between the two different surveying techniques. An average absolute error of 4.6 ± 4 mm for the ALOS data and of 4.8 ± 3.5 mm for the COSMO-SkyMed data confirmed the reliability of the analysis. The spatial analysis of DInSAR ground surface displacement reveals a direct correlation with the thickness of the compressible alluvial deposits. Detected ground subsidence in the past 20 years is most likely a consequence of a 100–200 m groundwater level drop that has persisted since the 1970s due to the overexploitation of the Alto Guadalentín aquifer system. The negative gradient of the pore pressure is responsible for the extremely slow consolidation of a very thick (> 100 m) layer of fine-grained silt and clay layers with low vertical hydraulic permeability (approximately 50 mm/h) wherein the maximum settlement has still not been reached.
      237  39
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Joint Terrestrial and Aerial Measurements to Study Ground Deformation: Application to the Sciara Del Fuoco at the Stromboli Volcano (Sicily)

    (2016-05-31) ; ; ;
    Bonforte, A.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Catania, Catania, Italia
    ;
    Gonzàlez, P. J.; COMET, Institute of Geophysics and Tectonics, School of Earth and Environment, University of Leeds, Leeds LS2 9JT, UK
    The 2002-2003 Stromboli eruption triggered the failure of part of the Sciara del Fuoco slope, which generated a tsunami that struck the island and the northern coastline of Sicily. The Sciara del Fuoco is a very steep slope where all lava flows from the craters' emplacement; most lateral eruptions usually take place from fissures propagating in this sector of the volcano. The eruption went on to produce a lava field that filled the area affected by the landslide. This in turn led to further instability, renewing the threat of another slope failure and a potentially related tsunami. This work describes a new joint approach, combining surveying data and aerial image correlometry methods, to study the motion of this unstable slope. The combination has the advantage of very precise surveying measurements, which can be considered the ground truth to constrain the very-high-resolution aerial photogrammetric data, thereby obtaining highly detailed and accurate ground deformation maps. The joint use of the two methods can be very useful to obtain a more complete image of the deformation field for monitoring dangerous and/or rather inaccessible places. The proposed combined methodology improves our ability to study and assess hazardous processes associated with significant ground deformation.
      819  233
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    The 2012 Kilauea Volcano, Hawai’i, Slow-Slip Event Captured by cGPS and Satellite Radar Interferometry

    (Springer Berlin Heidelberg, 2013-10-08) ; ; ;
    Gonzalez, P.; Department of Earth Sciences, Western University, London, ON, Canada
    ;
    Samsonov, S.; Canada Centre for Remote Sensing, 588 Booth Street, Ottawa, ON, Canada
    Slow-slip events (SSEs) have been detected to occur along the southern flank of Kilauea volcano (Hawaii, USA). SSEs have been recorded using continuous Global Positioning System (GPS) and tiltmeters stations. Until now, differential radar interferometry results have not been conclusive about the spatial pattern of associated vertical motion, although GPS time series show subsidence signals. In late May 2012, the most recent SSE began and it lasted for approximately 3 days. SSE was accompanied by earthquakes at the decollement ( ∼7--9km ), and an unusual swarm across the Koa’e fault system (June 5th). Here, we use a dense GPS network and Radarsat-2 satellite data to map the associated ground deformation. A SSE fault-slip map is inferred using elastic modeling and compared with the fault-slip map due to long-term volcano flank motion. Inferred long- and short-term fault-slip distributions allow observing a complementary pattern, likely related to different fault properties.
      273  45