Skip to main content
The search returned 14 results
Now showing 1 - 10 of 14
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Multidisciplinary high resolution Geophysical Imaging of Pantano Ripa Rossa Segment of the Irpinia Fault (Southern Italy)

    (2024-11-06) ;
    Ferrara, Giuseppe
    ;
    ; ;
    The Irpinia Fault, also known as the Monte Marzano Fault System, located in the Southern Apennines (Italy), is one of the most seismically active structures in the Mediterranean. It is the source of the 1980, Ms 6.9, multi-segment rupture earthquake that caused significant damage and nearly 3,000 casualties. Paleoseismological surveys indicate that this structure has generated at least four Mw ~ 7 surface-rupturing earthquakes in the past 2 ka. This paper presents a comprehensive, high-resolution geophysical investigation focused on the southernmost fault segment of the Monte Marzano Fault System, i.e., the Pantano-Ripa Rossa Fault, outcropping within the Pantano di San Gregorio Magno intramontane basin. The project, named TEst Site IRpinia fAult (TESIRA), was supported by the University of Napoli Federico II to study the near-surface structure of this intra-basin fault splay that repeatedly ruptured co-seismically in the past thousands of years. Our imaging approach included 2D and 3D electrical and seismic surveys, gravimetry, 3D FullWaver electrical tomography, drone-borne GPR and magnetic surveys, and CO2 soil flux assessment across the surface rupture. This multidisciplinary investigation improved our understanding of the basin shallow structure, providing an image of a rather complex subsurface fault and basin geometry. Seismic data suggest that fault activity at the Pantano segment of MMFS is characterized by a near-surface cumulative displacement greater than previous estimations, calling into question earlier assumptions about the timing of its activation. Despite some challenges with our drone-mounted survey equipment, the integrated dataset provides a comprehensive and reliable image of the subsurface structure. This work demonstrates the utility of developing an integrated approach at high-resolution geophysical imaging and interpretation of fault zones with weak morphological expressions.
      18  97
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Comment on “Gravity modeling reveals a Messinian foredeep depocenter beneath the intermontane Fucino basin (Central Apennines)” by

    The Fucino Pliocene-Quaternary extensional basin represents a puzzling tectonic structure in the central part of the Apennine chain (Italy). Bordered by seismogenetic faults responsible for strong earthquakes in the last millennium (Mw = 6–7), differently from other elongated intermontane basins in this area, it has a rounded shape and extends for 15–20 km both in the E-W and N-S directions. This structural peculiarity is also demonstrated by the very intense gravity low, with amplitude >30 mGal (e.g., Cella et al., 2021), associated with this basin. Available reflection seismic data in this area are often considered of low quality (e.g., Compagnia Mediterranea Idrocarburi, 1999), and no deep well (i.e., >200 m depth) is present in this basin, so that its structure at depth results poorly constrained. In a recent paper, Mancinelli et al. (2021; hereafter this paper will be referred to as MSPM), by forward modelling residual gravity data try to confirm a recent 2D seismic stratigraphic interpretation (Patruno and Scisciani, 2021) and the relative model of the Fucino basin structure. In this interpretation of seismic data, the Pliocene-Quaternary units infilling the basin overlies an older (Messinian) siliciclastic flysch, instead of a carbonate substrate as hypothesized in previous studies (e. g., Cavinato et al., 2002; Cella et al., 2021). The forward gravity modelling attempted in MSPM would confirm the presence of huge volumes of Miocene sediments, with a thickness up to 1000 m, and would support the hypothesis of the presence of a, rapidly filled, transient Messinian foredeep basin. However, we have concerns about the quality of the gravity modelling proposed in MSPM, and consequently we are doubtful about the geological conclusions that are drawn from it.
      86  1
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Basement Mapping of the Fucino Basin in Central Italy by ITRESC Modeling of Gravity Data

    Sediments infilling in intermontane basins in areas with high seismic activity can strongly affect ground-shaking phenomena at the surface. Estimates of thickness and density dis- tribution within these basin infills are crucial for ground motion amplification analysis, especially where demographic growth in human settlements has implied increasing seismic risk. We em- ployed a 3D gravity modeling technique (ITerative RESCaling—ITRESC) to investigate the Fucino Basin (Apennines, central Italy), a half-graben basin in which intense seismic activity has recently occurred. For the first time in this region, a 3D model of the Meso-Cenozoic carbonate basement morphology was retrieved through the inversion of gravity data. Taking advantage of the ITRESC technique, (1) we were able to (1) perform an integration of geophysical and geological data con- straints and (2) determine a density contrast function through a data-driven process. Thus, we avoided assuming a priori information. Finally, we provided a model that honored the gravity anomalies field by integrating many different kinds of depth constraints. Our results confirmed evidence from previous studies concerning the overall shape of the basin; however, we also high- lighted several local discrepancies, such as: (a) the position of several fault lines, (b) the position of the main depocenter, and (c) the isopach map. We also pointed out the existence of a new, un- known fault, and of new features concerning known faults. All of these elements provided useful contributions to the study of the tectono-sedimentary evolution of the basin, as well as key infor- mation for assessing the local site-response effects, in terms of seismic hazards.
      125  96
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Joint Interpretation of Geophysical Results and Geological Observations for Detecting Buried Active Faults: The Case of the “Il Lago” Plain (Pettoranello del Molise, Italy)

    We report a geophysical study across an active normal fault in the Southern Apennines. The surveyed area is the “Il Lago” Plain (Pettoranello del Molise), at the foot of Mt. Patalecchia (Molise Apennines, Southern Italy), a small tectonic basin filled by Holocene deposits located at the NW termination of the major Quaternary Bojano basin structure. This basin, on the NE flank of the Matese Massif, was the epicentral area of the very strong 26 July, 1805, Sant’Anna earthquake (I0 = X MCS, Mw = 6.7). The “Il Lago” Plain is bordered by a portion of the right-stepping normal fault system bounding the whole Bojano Quaternary basin (28 km long). The seismic source responsible for the 1805 earthquake is regarded as one of the most hazardous structures of the Apennines; however, the position of its NW boundary of this seismic source is debated. Geological, geomorphological and macroseismic data show that some coseismic surface faulting also occurred in correspondence with the border fault of the “Il Lago” Plain. The study of the “Il Lago” Plain subsurface might help to constrain the NW segment boundary of the 1805 seismogenic source, suggesting that it is possibly a capable fault, source for moderate (Mw < 5.5) to strong earthquakes (Mw ≥ 5.5). Therefore, we constrained the geometry of the fault beneath the plain using low-frequency Ground Penetrating Radar (GPR) data supported by seismic tomography. Seismic tomography yielded preliminary information on the subsurface structures and the dielectric permittivity of the subsoil. A set of GPR parallel profiles allowed a quick and high-resolution characterization of the lateral extension of the fault, and of its geometry at depth. The result of our study demonstrates the optimal potential of combined seismic and deep GPR surveys for investigating the geometry of buried active normal faults. Moreover, our study could be used for identifying suitable sites for paleoseismic analyses, where record of earthquake surface faulting might be preserved in Holocene lacustrine sedimentary deposits. The present case demonstrates the possibility to detect with high accuracy the complexity of a fault-zone within a basin, inferred by GPR data, not only in its shallower part, but also down to about 100 m depth.
      119  119
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Testing the value of a multi-scale gravimetric analysis in characterizing active fault 2 geometry at hypocentral depths: the 2016-2017 Central Italy seismic sequence

    We report the results of a multidisciplinary investigation performed across the normal Quaternary faults that ruptured the surface during the August 24 (Mw 6.0) and October 30 (Mw 6.5), 2016 strong earthquakes in the Mt. Vettore-Mt. Bove areas, central Italy. Our aim is to test the effectiveness of the contribution of a multi-scale gravimetric analysis in characterizing seismogenic faults’ geometry at hypocentral depths on well-known outcropping faulty systems with known earthquake distribution. We adopted a multi-scale geophysical/geological approach consisting in the comparison of gravity lineaments inferred by Multiscale Derivative Analysis with the Quaternary structural setting mapped in the study area, the primary coseismic surface ruptures of the 2016-2017 sequence and the earthquakes’ epicentral distribution. Moreover, we performed a combined interpretation of 2D hypocentral sections of the 2016-2017 seismic sequences with images resulting from the Depth from Extreme Points method, to infer the faults’ geometry at depth. Based on our results, the investigated NW-SE Mt. Vettore-Mt. Bove fault system is dipping 60°-70° westward. We also detected the splays of this primary fault and its blind antithetic NW-SE structure, dipping northeastward. In the Norcia basin we highlight two main faults bordering the basin with a dip of about 45°. The one edging the eastern side dips westward, whereas the fault edging the western side dips eastward. Thanks to our analysis we could identify and characterize the geometry of the Norcia and Vettore master faults, as well as other blind/buried and/or silent faults that are related to the 2016 seismogenic structure. Our results show the effectiveness of this approach in potentially high-hazard areas that are structurally poorly known.
      328  242
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Gravity modeling finds a large magma body in the deep crust below the Gulf of Naples, Italy

    We analyze a wide gravity low in the Campania Active Volcanic Area and interpret it by a large and deep source distribution of partially molten, low-density material from about 8 to 30 km depth. Given the complex spatial-temporal distribution of explosive volcanism in the area, we model the gravity data consistently with several volcanological and petrological constraints. We propose two possible models: one accounts for the coexistence, within the lower/intermediate crust, of large amounts of melts and cumulates besides country rocks. It implies a layered distribution of densities and, thus, a variation with depth of percentages of silicate liquids, cumulates and country rocks. The other reflects a fractal density distribution, based on the scaling exponent estimated from the gravity data. According to this model, the gravity low would be related to a distribution of melt pockets within solid rocks. Both density distributions account for the available volcanological and seismic constraints and can be considered as end-members of possible models compatible with gravity data. Such results agree with the general views about the roots of large areas of ignimbritic volcanism worldwide. Given the prolonged history of magmatism in the Campania area since Pliocene times, we interpret the detected low-density body as a developing batholith.
      89  92
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    A multidisciplinary approach to characterize the geometry of active faults: the example of Mt. Massico, Southern Italy

    We present the results of a multidisciplinary and multiscale study at Mt. Massico, Southern Italy. Mt. Massico is a carbonate horst located along the Campanian-Latial margin of the Tyrrhenian basin, bordered by two main NE–SW systems of faults, and by NW–SE and N–S trending faults. Our analysis deals with the modelling of the main NE– SW faults. These faults were capable during Plio-Pleistocene and are still active today, even though with scarce and low-energy seismicity (Mw maximum = 4.8).We inferred the pattern of the fault planes through a combined interpretation of 2-D hypocentral sections, a multiscale analysis of gravity field and geochemical data. This allowed us to characterize the geometry of these faults and infer their large depth extent. This region shows very striking gravimetric signatures, well-known Quaternary faults, moderate seismicity and a localized geothermal fluid rise. Thus, this analysis represents a valid case study for testing the effectiveness of a multidisciplinary approach, and employing it in areas with buried and/or silent faults of potential high hazard, such as in the Apennine chain.
      241  4
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Analysis of the San Giuliano di Puglia (Southern Italy) active faults: an integrated approach

    (Rendiconti della Società Geologica Italiana, 2016-09-07) ; ; ; ;
    The area of San Giuliano di Puglia (Southern Italy) was struck by a moderate earthquake of Mw=5.7 on October 31st, 2002. The aim of this study is to identify and better constrain the geometry of the seismogenic structures (active, outcropping and buried faults) in the area. We used an integrated analysis of geo-structural, seismic and gravimetric data. We built three thematic databases: “faults”, “earthquakes” and “gravimetric" data: 1. The fault database consists of data extracted from the available structural and geological maps: ITHACA (ITaly HAzard from CApable faults) catalogue; DISS (Database of Individual Seismogenetic Sources) database; the "Neotectonic Map of Italy" 1:500.000; the Geological Map 1:100.000, Sheets 154, 155, 162, 163; several geological studies. 2. The earthquakes database was created by merging the data from historical and instrumental Catalogues (CPTI11; ISIDE-INGV). 3. The gravimetric database was created through the Multiscale Derivative Analysis (MDA) of the Bouguer anomaly map of the area, whose maxima show the presence of density lineaments. The integration of these datasets in GIS environment, identified three possible cases of correlation between faults, earthquakes and MDA maxima: ⦁ A clear correlation between epicentral location, fault positions and MDA maxima shows the existence of active faults; ⦁ A good correlation between MDA maxima and epicentral positions, without correspondence with faults known from geological data, can suggest the presence of buried active faults; ⦁ A good correlation between faults from geological datasets and literature and MDA maxima, without correlation with earthquakes, can indicate the existence of inactive or silent faults. Previous studies show that the main shock in the area of San Giuliano di Puglia was generated by a deep and subvertical strike-slip structure E-W trending, with a right lateral focal mechanism (Galli & Molin, 2004). Nevertheless, Vezzani et al. (2009) proposed a reverse fault mechanism. Valensise et al. (2004) suggested that the 2002 events could be related to the Mattinata fault, a major active right lateral strike-slip fault cutting across the Gargano promontory, In order to better constrain the structural framework of this area, we combined faults seismic data and a multiscale approach of gravity data in GIS environment.
      119  119
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Subcircular conduits and dikes offshore the Somma-Vesuvius volcano revealed by magnetic and seismic data

    We analyzed new magnetic, bathymetric, and seismic data acquired in the offshore sector of Somma-Vesuvius volcano (Italy). We detected a group of high-intensity, short wavelength magnetic anomalies corresponding to partly buried volcanic dome-like structures located by seismic data. The magnetic anomalies are aligned along a NW-SE strike that is the preferential orientation of an eruptive fracture of the pre-19 ka activity of Vesuvius. Four cones emplaced after the Last Glacial Maximum (19 ka), whereas a fifth one emplaced more recently suggesting a rejuvenation of the eruptive system offshore the volcano in historical times. We also identified a NE-SW elongated magnetic anomaly consistent with a dike-like body associated to an on-land tectonic structure that was active in recent times at Vesuvius. A delta-like area with diffuse low-intensity magnetic anomalies reflects the seaward fronts of lava flows that entered the sea mainly during the Middle Ages.
      118  98
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    A tool for evaluating geothermal power exploitability and its application to Ischia, Southern Italy

    The paper proposes a method to evaluate the potential for electric power production at any site of possible geothermal interest. Accounting for geological data of the reservoirs, the method allows the computation of the available electrical power of the investigated site. Electrical energy production from geothermal sources is realized through different techniques, such as single flash and double flash, dry steam, and binary ORC plants. The technique chosen to be the most productive is determined by analyzing a specific range of geofluid properties, mainly temperature and pressure. Moreover, each plant typology has a global efficiency that may be correlated to geofluid enthalpy by empiric relations available in literature. The proposed evaluation method brings together all these correlations, yielding the power availability from a geosource, once its temperature and pressure are known. The method takes as input the geofluid available flow rate, its pressure, temperature and non-condensable gas content. It defines the best plant option from these parameters, calculates its global efficiency and finally returns the actual available power. For sites of geothermic interest, such as the volcanic island of Ischia in Southern Italy, the results of the application of this new method clearly highlight the most suitable zones for power plants installations.
      350  104