Skip to main content
The search returned 14 results
Now showing 1 - 10 of 14
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Assessment of Slow Deformations and Landslide Modelling in the Urban Area through a Multi-Methodological Approach

    (Wuhan : China University of Geosciences, 2025-04-15) ; ; ; ;
    Slow-moving landslides are widespread in the Mediterranean area, causing damage to the exposed facilities and economic losses in many countries. The recognition of slow-moving landslides in urban areas is always a difficult task to deal with because the presence of buildings, infrastructures, and human activities usually conceals the morphological signs of these landslide activities. So, in the last decades, numerous researchers have shown new methodologies to deepen the studies of similar instability phenomena. The present research is based on an integrated approach to investigate the landslide boundaries, type of movement, failure surface depth, and vulnerability state of buildings in Rota Greca Village (Calabria region, southern Italy) affected by a slowmoving landslide. For this purpose, multi-source data were acquired through geological and geomorphological surveys, recognition of landslide-induced damage on the built environment, subsurface investigations (e.g., continuous drill boreholes, Standard Penetration Test, Rock Quality Designation index and inclinometer monitoring), laboratory tests (direct shear tests on undisturbed samples), geophysical survey, and InSAR-derived map of deformation rates. The complete integration of multi-source data allowed for the construction of reliable landslide modelling with relative geotechnical properties. In addition, the cross-comparison between surface deformation data by SAR images and severity damage level collected on the exposed buildings enabled to obtain the vulnerability map of the built area. In particular, the achieved goals highlighted two failure surfaces at about-13 and-25 m depth, causing a high vulnerability value for the buildings allocated in the central portion of the Rota Greca Village. The knowledge acquired by the multi-approach can be used to manage and implement appropriate landslide risk mitigation strategies, providing helpful advice and best practices to state-run organisations and stakeholders for landslide management in urban sites.
      6
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Comment on “Gravity modeling reveals a Messinian foredeep depocenter beneath the intermontane Fucino basin (Central Apennines)” by

    The Fucino Pliocene-Quaternary extensional basin represents a puzzling tectonic structure in the central part of the Apennine chain (Italy). Bordered by seismogenetic faults responsible for strong earthquakes in the last millennium (Mw = 6–7), differently from other elongated intermontane basins in this area, it has a rounded shape and extends for 15–20 km both in the E-W and N-S directions. This structural peculiarity is also demonstrated by the very intense gravity low, with amplitude >30 mGal (e.g., Cella et al., 2021), associated with this basin. Available reflection seismic data in this area are often considered of low quality (e.g., Compagnia Mediterranea Idrocarburi, 1999), and no deep well (i.e., >200 m depth) is present in this basin, so that its structure at depth results poorly constrained. In a recent paper, Mancinelli et al. (2021; hereafter this paper will be referred to as MSPM), by forward modelling residual gravity data try to confirm a recent 2D seismic stratigraphic interpretation (Patruno and Scisciani, 2021) and the relative model of the Fucino basin structure. In this interpretation of seismic data, the Pliocene-Quaternary units infilling the basin overlies an older (Messinian) siliciclastic flysch, instead of a carbonate substrate as hypothesized in previous studies (e. g., Cavinato et al., 2002; Cella et al., 2021). The forward gravity modelling attempted in MSPM would confirm the presence of huge volumes of Miocene sediments, with a thickness up to 1000 m, and would support the hypothesis of the presence of a, rapidly filled, transient Messinian foredeep basin. However, we have concerns about the quality of the gravity modelling proposed in MSPM, and consequently we are doubtful about the geological conclusions that are drawn from it.
      86  1
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Basement Mapping of the Fucino Basin in Central Italy by ITRESC Modeling of Gravity Data

    Sediments infilling in intermontane basins in areas with high seismic activity can strongly affect ground-shaking phenomena at the surface. Estimates of thickness and density dis- tribution within these basin infills are crucial for ground motion amplification analysis, especially where demographic growth in human settlements has implied increasing seismic risk. We em- ployed a 3D gravity modeling technique (ITerative RESCaling—ITRESC) to investigate the Fucino Basin (Apennines, central Italy), a half-graben basin in which intense seismic activity has recently occurred. For the first time in this region, a 3D model of the Meso-Cenozoic carbonate basement morphology was retrieved through the inversion of gravity data. Taking advantage of the ITRESC technique, (1) we were able to (1) perform an integration of geophysical and geological data con- straints and (2) determine a density contrast function through a data-driven process. Thus, we avoided assuming a priori information. Finally, we provided a model that honored the gravity anomalies field by integrating many different kinds of depth constraints. Our results confirmed evidence from previous studies concerning the overall shape of the basin; however, we also high- lighted several local discrepancies, such as: (a) the position of several fault lines, (b) the position of the main depocenter, and (c) the isopach map. We also pointed out the existence of a new, un- known fault, and of new features concerning known faults. All of these elements provided useful contributions to the study of the tectono-sedimentary evolution of the basin, as well as key infor- mation for assessing the local site-response effects, in terms of seismic hazards.
      125  96
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Testing the value of a multi-scale gravimetric analysis in characterizing active fault 2 geometry at hypocentral depths: the 2016-2017 Central Italy seismic sequence

    We report the results of a multidisciplinary investigation performed across the normal Quaternary faults that ruptured the surface during the August 24 (Mw 6.0) and October 30 (Mw 6.5), 2016 strong earthquakes in the Mt. Vettore-Mt. Bove areas, central Italy. Our aim is to test the effectiveness of the contribution of a multi-scale gravimetric analysis in characterizing seismogenic faults’ geometry at hypocentral depths on well-known outcropping faulty systems with known earthquake distribution. We adopted a multi-scale geophysical/geological approach consisting in the comparison of gravity lineaments inferred by Multiscale Derivative Analysis with the Quaternary structural setting mapped in the study area, the primary coseismic surface ruptures of the 2016-2017 sequence and the earthquakes’ epicentral distribution. Moreover, we performed a combined interpretation of 2D hypocentral sections of the 2016-2017 seismic sequences with images resulting from the Depth from Extreme Points method, to infer the faults’ geometry at depth. Based on our results, the investigated NW-SE Mt. Vettore-Mt. Bove fault system is dipping 60°-70° westward. We also detected the splays of this primary fault and its blind antithetic NW-SE structure, dipping northeastward. In the Norcia basin we highlight two main faults bordering the basin with a dip of about 45°. The one edging the eastern side dips westward, whereas the fault edging the western side dips eastward. Thanks to our analysis we could identify and characterize the geometry of the Norcia and Vettore master faults, as well as other blind/buried and/or silent faults that are related to the 2016 seismogenic structure. Our results show the effectiveness of this approach in potentially high-hazard areas that are structurally poorly known.
      328  242
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Gravity modeling finds a large magma body in the deep crust below the Gulf of Naples, Italy

    We analyze a wide gravity low in the Campania Active Volcanic Area and interpret it by a large and deep source distribution of partially molten, low-density material from about 8 to 30 km depth. Given the complex spatial-temporal distribution of explosive volcanism in the area, we model the gravity data consistently with several volcanological and petrological constraints. We propose two possible models: one accounts for the coexistence, within the lower/intermediate crust, of large amounts of melts and cumulates besides country rocks. It implies a layered distribution of densities and, thus, a variation with depth of percentages of silicate liquids, cumulates and country rocks. The other reflects a fractal density distribution, based on the scaling exponent estimated from the gravity data. According to this model, the gravity low would be related to a distribution of melt pockets within solid rocks. Both density distributions account for the available volcanological and seismic constraints and can be considered as end-members of possible models compatible with gravity data. Such results agree with the general views about the roots of large areas of ignimbritic volcanism worldwide. Given the prolonged history of magmatism in the Campania area since Pliocene times, we interpret the detected low-density body as a developing batholith.
      89  92
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    A multidisciplinary approach to characterize the geometry of active faults: the example of Mt. Massico, Southern Italy

    We present the results of a multidisciplinary and multiscale study at Mt. Massico, Southern Italy. Mt. Massico is a carbonate horst located along the Campanian-Latial margin of the Tyrrhenian basin, bordered by two main NE–SW systems of faults, and by NW–SE and N–S trending faults. Our analysis deals with the modelling of the main NE– SW faults. These faults were capable during Plio-Pleistocene and are still active today, even though with scarce and low-energy seismicity (Mw maximum = 4.8).We inferred the pattern of the fault planes through a combined interpretation of 2-D hypocentral sections, a multiscale analysis of gravity field and geochemical data. This allowed us to characterize the geometry of these faults and infer their large depth extent. This region shows very striking gravimetric signatures, well-known Quaternary faults, moderate seismicity and a localized geothermal fluid rise. Thus, this analysis represents a valid case study for testing the effectiveness of a multidisciplinary approach, and employing it in areas with buried and/or silent faults of potential high hazard, such as in the Apennine chain.
      241  4
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Analysis of the San Giuliano di Puglia (Southern Italy) active faults: an integrated approach

    (Rendiconti della Società Geologica Italiana, 2016-09-07) ; ; ; ;
    The area of San Giuliano di Puglia (Southern Italy) was struck by a moderate earthquake of Mw=5.7 on October 31st, 2002. The aim of this study is to identify and better constrain the geometry of the seismogenic structures (active, outcropping and buried faults) in the area. We used an integrated analysis of geo-structural, seismic and gravimetric data. We built three thematic databases: “faults”, “earthquakes” and “gravimetric" data: 1. The fault database consists of data extracted from the available structural and geological maps: ITHACA (ITaly HAzard from CApable faults) catalogue; DISS (Database of Individual Seismogenetic Sources) database; the "Neotectonic Map of Italy" 1:500.000; the Geological Map 1:100.000, Sheets 154, 155, 162, 163; several geological studies. 2. The earthquakes database was created by merging the data from historical and instrumental Catalogues (CPTI11; ISIDE-INGV). 3. The gravimetric database was created through the Multiscale Derivative Analysis (MDA) of the Bouguer anomaly map of the area, whose maxima show the presence of density lineaments. The integration of these datasets in GIS environment, identified three possible cases of correlation between faults, earthquakes and MDA maxima: ⦁ A clear correlation between epicentral location, fault positions and MDA maxima shows the existence of active faults; ⦁ A good correlation between MDA maxima and epicentral positions, without correspondence with faults known from geological data, can suggest the presence of buried active faults; ⦁ A good correlation between faults from geological datasets and literature and MDA maxima, without correlation with earthquakes, can indicate the existence of inactive or silent faults. Previous studies show that the main shock in the area of San Giuliano di Puglia was generated by a deep and subvertical strike-slip structure E-W trending, with a right lateral focal mechanism (Galli & Molin, 2004). Nevertheless, Vezzani et al. (2009) proposed a reverse fault mechanism. Valensise et al. (2004) suggested that the 2002 events could be related to the Mattinata fault, a major active right lateral strike-slip fault cutting across the Gargano promontory, In order to better constrain the structural framework of this area, we combined faults seismic data and a multiscale approach of gravity data in GIS environment.
      119  119
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Multiparametric data analysis for seismic source identification in the Campanian area: merging of seismological, structural and gravimetric data

    This paper deals with an interdisciplinary research that has been carried out to investigate the neotectonic activity of the Campanian plain and surrounding areas (southern Italy), affected by Plio-Pleistocene tectonics and volcanic activity. Three thematic data sets have been generated for this area, “fault”, “earthquake” and “gravimetric” data sets, respectively. These data sets allow an integrated analysis of the structural, seismic and gravimetric data in GIS environment with the aim of identifying the active structural lineaments that accommodate the local stress through seismic activity. In detail, an original map with Plio-Quaternary tectonic structures of the Campanian plain and its margins, constrained by morpho-structural analysis and/or geophysical exploration data, is presented. The available earthquake data sets have been merged in a single data set, including seismicity in the Campanian area from 217 b.C. to 2010; processing of seismic data for new precise earthquake locations have been carried out for some clusters of events with poor data, for better constraining existence and activity of some outcropping and buried tectonic structures. As regards the gravimetric data set, a Multiscale Derivative Analysis (MDA) of the gravity field of the area has been performed, relying on the high resolution properties of the Enhanced Horizontal Derivative (EHD). MDA of gravity data allowed localization of several linear and close trends, identifying anomaly sources whose presence was not previously detected. Our integrated analysis shows that a strong correlation occurs among the new hypocentral locations of the seismic clusters matching the fault systems of the Massico Mt. and Avella Mts., and the MDA lineaments from gravity data relative to the same tectonic structures.
      397  56
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A review of the gravity and magnetic studies in the Tyrrhenian Basin and its volcanic districts

    Since the Sixties, the turning point marked by the Plate Tectonics global theory has provided new ideas for the interpretation of the complex geodynamic evolution of the Mediterranean area. The renewed interest that followed gave a strong impulse to the geological and geophysical investigations of the Mediterranean area and, more specifically, of the Tyrrhenian Basin. Therefore, large scale geophysical surveys and oceanographic cruises were carried out until the end of the Eighties to fill the gap of geophysical information existing in the area until then. Afterwards, short scale surveys were prevalent to improve the detail of the information in areas of geodynamic interest. The gathered data sets allowed new models to be formulated, improving the knowledge of the crustal and lithospheric structure of the Tyrrhenian Basin (and surrounding areas) and the reconstruction of its complex geodynamic evolution. In this frame, the contribution of gravity and magnetic investigations has been unquestionable and deserves a wide-ranging review both on large and small scale. The main features of the potential fields resulting from these surveys will be described and the interpretative models suggested by several authors will be summarized.
      329  799
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Improved techniques in data analysis and interpretation of potential fields: examples of application in volcanic and seismically active areas

    (2002) ; ; ; ;
    Rapolla, A.; Dipartimento di Scienze della Terra, Università degli Studi di Napoli Federico II, Napoli, Italy
    Geopotential data may be interpreted by many different techniques, depending on the nature of the mathematical equations correlating specific unknown ground parameters to the measured data set. The investigation based on the study of the gravity and magnetic anomaly fields represents one of the most important geophysical approaches in the earth sciences. It has now evolved aimed both at improving of known methods and testing other new and reliable techniques. This paper outlines a general framework for several applications of recent techniques in the study of the potential methods for the earth sciences. Most of them are here described and significant case histories are shown to illustrate their reliability on active seismic and volcanic areas.
      163  998