Fedi, Maurizio
Preferred name
Fedi, Maurizio
ORCID
21 results
Filters
Settings
The search returned 21 results
Now showing 1 - 10 of 21
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Volcanic structures investigation through SAR and seismic interferometric methods: The 2011–2013 Campi Flegrei unrest episode
(2019); ; ; ; Observations from satellites provide high-resolution images of ground deformation allowing to infer deformation sources by developing advanced modeling of magma ascent and intrusion processes. Nevertheless, such models can be strongly biased without a precise model of the internal structure of the volcano. In this study, we jointly exploited two interferometric techniques to interpret the 2011–2013 unrest at Campi Flegrei caldera (CFc). The first is the Interferometric Synthetic Aperture Radar (InSAR) technique, which provides highly-resolved spatial and temporal images of ground deformation. The second is the Ambient Noise Tomography (ANT), which images subsurface structures, providing the constraints necessary to infer the depth of the shallow source at CFc (between 0.8 and 1.2 km). We applied for the first time a tool to delineate the deformation source boundaries from the observed deformation maps: the Total Horizontal Derivative (THD) technique. The THD processes the vertical component of the ground deformation field detected through InSAR applied to COSMO-SkyMed data. The patterns retrieved by applying the THD technique show consistent spatial correlations with (1) the seismic group-velocity maps achieved through the ANT and (2) the distribution of the earthquakes nucleated during the unrest at ~1 km. High-velocity anomalies, the retrieved geometrical features of the deformation field, and the spatial distribution of seismicity coincide with extinct volcanic vents in the eastern part of the caldera (Solfatara/ Pisciarelli and Astroni). Such a coincidence hints at a significant role of the extinct plumbing system in either constraining or channeling the eastward propagation of magmatic fluids. Here, we demonstrated that a joint analysis of the InSAR patterns, seismic structures, and seismicity allows us to model in space and time the characteristics and nature of the shallow deformation source at CFc. Using published literature, we show that the effects of structural heterogeneities at shallow depths may have a more significant early-stage impact on the evolution of the surface displacement signals than deeper magmatic sources: these secondary structural effects may produce local amplification in the deformation records which can be mistakenly interpreted as early signals of impending eruptions. The achieved results are particularly relevant for the understanding of the origin of deformation signal at volcanoes where magma propagation within sills is expected, as at CFc.404 155 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Testing the value of a multi-scale gravimetric analysis in characterizing active fault 2 geometry at hypocentral depths: the 2016-2017 Central Italy seismic sequence
(2018-10); ; ; ; We report the results of a multidisciplinary investigation performed across the normal Quaternary faults that ruptured the surface during the August 24 (Mw 6.0) and October 30 (Mw 6.5), 2016 strong earthquakes in the Mt. Vettore-Mt. Bove areas, central Italy. Our aim is to test the effectiveness of the contribution of a multi-scale gravimetric analysis in characterizing seismogenic faults’ geometry at hypocentral depths on well-known outcropping faulty systems with known earthquake distribution. We adopted a multi-scale geophysical/geological approach consisting in the comparison of gravity lineaments inferred by Multiscale Derivative Analysis with the Quaternary structural setting mapped in the study area, the primary coseismic surface ruptures of the 2016-2017 sequence and the earthquakes’ epicentral distribution. Moreover, we performed a combined interpretation of 2D hypocentral sections of the 2016-2017 seismic sequences with images resulting from the Depth from Extreme Points method, to infer the faults’ geometry at depth. Based on our results, the investigated NW-SE Mt. Vettore-Mt. Bove fault system is dipping 60°-70° westward. We also detected the splays of this primary fault and its blind antithetic NW-SE structure, dipping northeastward. In the Norcia basin we highlight two main faults bordering the basin with a dip of about 45°. The one edging the eastern side dips westward, whereas the fault edging the western side dips eastward. Thanks to our analysis we could identify and characterize the geometry of the Norcia and Vettore master faults, as well as other blind/buried and/or silent faults that are related to the 2016 seismogenic structure. Our results show the effectiveness of this approach in potentially high-hazard areas that are structurally poorly known.328 245 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Gravity modeling finds a large magma body in the deep crust below the Gulf of Naples, Italy
(2018-05-29); ; ; ; We analyze a wide gravity low in the Campania Active Volcanic Area and interpret it by a large and deep source distribution of partially molten, low-density material from about 8 to 30 km depth. Given the complex spatial-temporal distribution of explosive volcanism in the area, we model the gravity data consistently with several volcanological and petrological constraints. We propose two possible models: one accounts for the coexistence, within the lower/intermediate crust, of large amounts of melts and cumulates besides country rocks. It implies a layered distribution of densities and, thus, a variation with depth of percentages of silicate liquids, cumulates and country rocks. The other reflects a fractal density distribution, based on the scaling exponent estimated from the gravity data. According to this model, the gravity low would be related to a distribution of melt pockets within solid rocks. Both density distributions account for the available volcanological and seismic constraints and can be considered as end-members of possible models compatible with gravity data. Such results agree with the general views about the roots of large areas of ignimbritic volcanism worldwide. Given the prolonged history of magmatism in the Campania area since Pliocene times, we interpret the detected low-density body as a developing batholith.89 94 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , A multidisciplinary approach to characterize the geometry of active faults: the example of Mt. Massico, Southern Italy
(2018-03-03); ; ; ; We present the results of a multidisciplinary and multiscale study at Mt. Massico, Southern Italy. Mt. Massico is a carbonate horst located along the Campanian-Latial margin of the Tyrrhenian basin, bordered by two main NE–SW systems of faults, and by NW–SE and N–S trending faults. Our analysis deals with the modelling of the main NE– SW faults. These faults were capable during Plio-Pleistocene and are still active today, even though with scarce and low-energy seismicity (Mw maximum = 4.8).We inferred the pattern of the fault planes through a combined interpretation of 2-D hypocentral sections, a multiscale analysis of gravity field and geochemical data. This allowed us to characterize the geometry of these faults and infer their large depth extent. This region shows very striking gravimetric signatures, well-known Quaternary faults, moderate seismicity and a localized geothermal fluid rise. Thus, this analysis represents a valid case study for testing the effectiveness of a multidisciplinary approach, and employing it in areas with buried and/or silent faults of potential high hazard, such as in the Apennine chain.241 4 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Analysis of the San Giuliano di Puglia (Southern Italy) active faults: an integrated approach
(Rendiconti della Società Geologica Italiana, 2016-09-07); ; ; ; The area of San Giuliano di Puglia (Southern Italy) was struck by a moderate earthquake of Mw=5.7 on October 31st, 2002. The aim of this study is to identify and better constrain the geometry of the seismogenic structures (active, outcropping and buried faults) in the area. We used an integrated analysis of geo-structural, seismic and gravimetric data. We built three thematic databases: “faults”, “earthquakes” and “gravimetric" data: 1. The fault database consists of data extracted from the available structural and geological maps: ITHACA (ITaly HAzard from CApable faults) catalogue; DISS (Database of Individual Seismogenetic Sources) database; the "Neotectonic Map of Italy" 1:500.000; the Geological Map 1:100.000, Sheets 154, 155, 162, 163; several geological studies. 2. The earthquakes database was created by merging the data from historical and instrumental Catalogues (CPTI11; ISIDE-INGV). 3. The gravimetric database was created through the Multiscale Derivative Analysis (MDA) of the Bouguer anomaly map of the area, whose maxima show the presence of density lineaments. The integration of these datasets in GIS environment, identified three possible cases of correlation between faults, earthquakes and MDA maxima: ⦁ A clear correlation between epicentral location, fault positions and MDA maxima shows the existence of active faults; ⦁ A good correlation between MDA maxima and epicentral positions, without correspondence with faults known from geological data, can suggest the presence of buried active faults; ⦁ A good correlation between faults from geological datasets and literature and MDA maxima, without correlation with earthquakes, can indicate the existence of inactive or silent faults. Previous studies show that the main shock in the area of San Giuliano di Puglia was generated by a deep and subvertical strike-slip structure E-W trending, with a right lateral focal mechanism (Galli & Molin, 2004). Nevertheless, Vezzani et al. (2009) proposed a reverse fault mechanism. Valensise et al. (2004) suggested that the 2002 events could be related to the Mattinata fault, a major active right lateral strike-slip fault cutting across the Gargano promontory, In order to better constrain the structural framework of this area, we combined faults seismic data and a multiscale approach of gravity data in GIS environment.119 120 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Subcircular conduits and dikes offshore the Somma-Vesuvius volcano revealed by magnetic and seismic data
(2016); ; ; ; We analyzed new magnetic, bathymetric, and seismic data acquired in the offshore sector of Somma-Vesuvius volcano (Italy). We detected a group of high-intensity, short wavelength magnetic anomalies corresponding to partly buried volcanic dome-like structures located by seismic data. The magnetic anomalies are aligned along a NW-SE strike that is the preferential orientation of an eruptive fracture of the pre-19 ka activity of Vesuvius. Four cones emplaced after the Last Glacial Maximum (19 ka), whereas a fifth one emplaced more recently suggesting a rejuvenation of the eruptive system offshore the volcano in historical times. We also identified a NE-SW elongated magnetic anomaly consistent with a dike-like body associated to an on-land tectonic structure that was active in recent times at Vesuvius. A delta-like area with diffuse low-intensity magnetic anomalies reflects the seaward fronts of lava flows that entered the sea mainly during the Middle Ages.118 98 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Multiparametric data analysis for seismic source identification in the Campanian area: merging of seismological, structural and gravimetric data
(2012-09-12); ; ; ; This paper deals with an interdisciplinary research that has been carried out to investigate the neotectonic activity of the Campanian plain and surrounding areas (southern Italy), affected by Plio-Pleistocene tectonics and volcanic activity. Three thematic data sets have been generated for this area, “fault”, “earthquake” and “gravimetric” data sets, respectively. These data sets allow an integrated analysis of the structural, seismic and gravimetric data in GIS environment with the aim of identifying the active structural lineaments that accommodate the local stress through seismic activity. In detail, an original map with Plio-Quaternary tectonic structures of the Campanian plain and its margins, constrained by morpho-structural analysis and/or geophysical exploration data, is presented. The available earthquake data sets have been merged in a single data set, including seismicity in the Campanian area from 217 b.C. to 2010; processing of seismic data for new precise earthquake locations have been carried out for some clusters of events with poor data, for better constraining existence and activity of some outcropping and buried tectonic structures. As regards the gravimetric data set, a Multiscale Derivative Analysis (MDA) of the gravity field of the area has been performed, relying on the high resolution properties of the Enhanced Horizontal Derivative (EHD). MDA of gravity data allowed localization of several linear and close trends, identifying anomaly sources whose presence was not previously detected. Our integrated analysis shows that a strong correlation occurs among the new hypocentral locations of the seismic clusters matching the fault systems of the Massico Mt. and Avella Mts., and the MDA lineaments from gravity data relative to the same tectonic structures.397 56 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Spatiotemporal gravity variations to look deep into the southern flank of Etna volcano
(2010-11-19); ; ; ; A 14-year-long microgravity data set (October 1994 - September 2007) collected along a 24-kilometer East-West trending profile of 19 stations was analyzed to detect underground mass redistributions related to the volcanic activity involving the southern flank of Mt Etna (Italy). A multiresolution wavelet analysis was applied to separate the volcano-related anomalies from the unwanted components. The residual image having both spatial extension and temporal duration evidenced two complete gravity increase/decrease cycles mainly affecting the central and eastern stations of the profile. The first gravity increase (early 1995 to the end of 1996) and decrease (end of 1996 to late in 1998) cycle reached a maximum amplitude of approximately 90 µGal. The second gravity increase (mid-1999 to mid-2000) – decrease (mid-2000 to early-2004) cycle attained an amplitude of about 80 µGal. After about five years of a persistent negative gravity anomaly, a new semi-cycle started at the end of 2006 and continued during the last survey carried out in September 2007. The density changes, modeled over time since 1994 using a Quadratic Programming algorithm, are mainly located at a depth of 2-4 km bsl in a region recognized to be a preferential pathway of magma rising and an intermediate zone of magma storage/withdrawal. The computed positive mass variations of about 105 x 10^9 kg were interpreted as magma accumulation, while negative mass changes of about -120 x 10^9 kg were associated with either magma drainage or opening of new voids by tectonic stresses within a source volume, where tensional earthquakes occurred.244 26 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Multiparametric data analysis for seismic sources identification in the Campania re-gion: merge of seismological, structural and gravimetric data.
(2010-10-26); ; ; ; The Campania region is one of the Italian most active areas from a geodynamic point of view since it is characterized by occurrence of intense and widely spread seismic activity. The seismicity of the area is concentrated mainly along the Southern Apennines chain, as well as beneath the Campanian volcanic areas (Vesuvio, Campi Flegrei, Ischia) and is also originated by seismic sources buried in the Campanian Plain and offshore the Thyrrenian sea. The aim of this paper is an attempt to better constrain the main active, outcropping and buried fault systems of the Campanian area through the correlation between seismicity, tectonic structures (from geological data and image analysis) and gravimetric data. The main seismogenetic sources of the Campanian Apennines, responsible for the destructive historical events of 1456, 1688, 1694, 1702, 1732, 1930, 1962 and 1980 (Io = X-XI MCS), activated mainly along NW–SE faults (CPTI, 2004; DISS, 2010) with hypocenters concentrated within the upper 20 km of the crust. The available focal mechanisms of the larger events show normal solutions consistent with NE–SW extension (Pondrelli et al., 2007). The Plio-Pleistocene Campanian Plain is a structural depression located between the eastern side of the Tyrrhenian Sea and the Southern Apennines chain. The stress field acting in the Campanian Plain is strongly debated. Structural observations on the faults of the Plain suggest prevalent normal motion for the NW–SE and the NE–SW trending faults, and minor oblique motion, consistent with deformation style of the Southern Apennines. The Plain is characterized by seismicity of energy lower than the seismic activity of the Southern Apennines chain mainly occurring along its margins. Minor seismicity spreads out inside the Plain. In this paper, seismic, geologic and gravimetric data have been analysed in GIS environment. In particular, the seismological data used in this study are relative both to the historical and recent seismic activity, collected by the following Catalogues: CPTI04 Catalogue of Parametric Italian Earthquakes, 2004 (217 b.C to 2002); CSI Catalogue of Instrumental Italian Earthquakes (1981-2002); CNT Seismic Bulletin of Istituto Nazionale di Geofisica e Vulcanologia (2003-2008); Data Base of Seismic Laboratory of Osservatorio Vesuviano (Istituto Nazionale di Geofisica e Vulcanologia) (2000-2009); SisCam Catalogue (Seismotectonic Information System of the Campanian Region) (1980-2000). Seismic data have been merged in a new seismic database. Moreover, new precise locations of a set of seismic events relative to the Campanian Plain have been processed. Some clusters of epicentres have been identified confirming the existence of active buried fault systems inside the Plain. The Geological Dataset has been implemented by merging all outcropping and buried faults extracted from the available geological and geophysical papers and maps (Bigi et al., 1983; Ambrosetti et al. 1986; Bonardi et al.,1988; Orsi et al. 1996; Milia A. e Torrente M.M.,1999; Cinque et al. 2000; Bruno et al. 2003). A multiscale analysis of the gravity and magnetic fields of the Southern Italy has been performed by Fedi et al, 2005. Multiscale Derivative Analysis (MDA) provided an almost complete representation of the structural framework of Southern Italy at three different scales. Most of the known geological elements of the Apennine system are clearly shown at intermediate and short scales, together with several trends indicating the location of buried structures. The main results of the combined analysis of seismic epicentres, faults and gravity data, indicate a strong correlation between seismicity and MDA lineaments from gravity data. Moreover, tectonic structures without correlated seismic activity and spread seismicity, apparently not linked with already known faults (buried faults?) have been identified.217 223 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Wavelet multi-resolution analysis for the local separation of microgravity anomalies at Etna volcano
(2010); ; ; ; A microgravity 14-year-long data set (October 1994-September 2007) recorded along a 24-kilometer East- West trending profile of 19 stations was analyzed to detect underground mass redistributions related to the volcanic activity involving the southern flank of Mt. Etna volcano (Italy). An important issue with the above data-set is the need of separating the useful signal (i.e. the volcano-related one) from unwanted components (instrumental, human-made, seasonal and other kinds of noise). To filter the gravity data-set from these last components we propose the wavelet multiresolution analysis. This method provides a good separation of the long period component from the short period one, and allows exploring the local features of the signal with a detail matched to their characteristic scale. Using the discrete wavelet transform (DWT), the gravity data are decomposed into a low-resolution approximation level and several detail levels. Once the useful signal has been suitably separated from the noise, the residual space-time-image evidences, over the studied area and time-interval, (i) recurrences in both space (i.e. zones under which mass redistributions occur more frequently) and time (i.e. cyclic processes) and (ii) microgravity anomalies correlated with the ensuing volcanic activity.164 31
