Scarlato, Piergiorgio
Preferred name
Scarlato, Piergiorgio
Email
piergiorgio.scarlato@ingv.it
Staff
staff
ORCID
Researcher ID
G-1714-2015
167 results
Filters
Settings
The search returned 167 results
Now showing 1 - 10 of 167
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Reconstructing the deposition of a 5.5 Ma lithified tephra by multi-scale and -analytical characterisations: the Messinian Maccarone section (Italy)
(Elsevier BV:PO Box 211, 1000 AE Amsterdam Netherlands:011 31 20 4853757, 011 31 20 4853642, 011 31 20 4853641, EMAIL: nlinfo-f@elsevier.nl, INTERNET: http://www.elsevier.nl, Fax: 011 31 20 4853598, 2026-04-03); ; ; ; Fallout pyroclasts from large explosive volcanic eruptions consist of loose material that accumulates at significant distances from volcanic vents, i.e., primary tephra; they can become secondary tephra if reworked by sedimentary processes. This discrimination is challenging for old, lithified tephra due to limited outcrops and the inability to use sieving techniques. Here, a multi-analytical protocol is adopted and validated on a 5.5 Ma old, lithified (tuff-like), thick, and widely distributed tephra in Central Italy (the Maccarone section). The deposit and mesoscopic samples are mainly massive, lacking erosive surfaces and allochthonous lithics. Geochemical and mineralogical (XRPD) analyses reveal a calc-alkaline, crystal-poor (feldspars and biotite) deposit, rich in both glass and bulk SiO 2. Sub-μm secondary sheet-silicates are widespread, whereas sedimentary calcite is significant in specific horizons. EPMA and SEM show rhyolitic, stubby, and poorly vesiculated glassy ashes, with 2D (by image analysis) grain-size distributions from ~200 to a few μm and highly sorted; ashes are also elongated and angular and poorly rounded. These microscopic shape attributes, coupled with the massive, structure-free mesoscopic character, indicate primary tephra deposition; conversely, the minor horizons with plane-parallel, curvilinear, or cross-layered aspects are instead ascribed to secondary and local remobilisations, which are unable to alter the textures of the ashes. The last hypothesis may represent a common intermediate depositional process between primary ashes settled in seawater and secondary pyroclast-rich turbidites. Trace elements indicate a volcanic-arc origin, possibly from a large eruption at approximately 5.5 Ma.4 14 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Sutures in mafic pyroclasts
(Berlin; Heidelberg; New York N.Y.: Springer, 2026-03-29); ; ; ; Micrometer-scale Fe (iron)-rich filaments are common in mafic pyroclasts, yet their origin remains debated. These filaments have been variably interpreted as sutured fractures in magma, the product of magma mingling, compositional boundary layers detached from plagioclase crystals, or oxide shells stripped from bubbles. Here, we compare new observations from several case studies with previous results, concluding that shared features point to a common origin of filaments in all eruptions. Key shared features of filaments are as follows: (1) Fe, Mg, and Ca enrichment; (2) variable degree of contortion, sharpness, and Fe oxide microlite content; (3) inclusion of small vesicles and microlite fragments; (4) transition into cracks and broken crystals; (5) connection to sharp concavities of vesicles and pyroclast edges; and (6) separation of regions within pyroclasts with distinct textures. Focused Ion Beam, micron-sized trenches cut perpendicular to the polished section, and X-ray computed microtomography images reveal that the two-dimensional filaments are complex three-dimensional surfaces resulting from magma suturing. These sutures form by fusing of molten, Fe-enriched surfaces, whether exposed crack surfaces within pyroclasts, the surfaces of colliding pyroclasts, or the surfaces of different portions of the same pyroclast folded over itself. During fusing, sutures entrap voids and crystal fragments present on the surfaces. After fusing, sutures evolve by diffusion, crystallization, and viscous deformation. Sutures witness the complex thermal and deformation history of pyroclasts during and after magma fragmentation and act as unique telltales of otherwise invisible processes that affect pyroclast final size, chemical composition, and vesicle and crystal size distributions.5 12 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Reconstructing the Holocene explosive eruptive history of the Erciyes volcano (Turkey) using proximal and distal tephra records
(John Wiley & Sons Limited:1 Oldlands Way, Bognor Regis, P022 9SA United Kingdom:011 44 1243 779777, EMAIL: cs-journals@wiley.co.uk, INTERNET: http://www.wiley.co.uk, Fax: 011 44 1243 843232, 2026); ;Özsoy-Ünal, Rengin ;Bolós, Xavier; Akkas, EfeMount Erciyes, the largest active volcano of Central Anatolia (Turkey), erupted explosively during the Holocene, producing the Karagüllü, Perikartin and Dikkartin tuff rings. Even though major cities like Kayseri and its ~1 million residents sit directly on these pyroclastic deposits, the timing and magnitude of the explosive eruptions have remained poorly constrained. To assess regional ash dispersal and improve the Erciyes Holocene explosive eruptive history, here, we integrate tephrostratigraphic observations, glass shard geochemistry and radiocarbon dating of organic-rich palaeosols. Our results indicate that the Karagüllü tuff ring formed around 11 258 ± 56 cal yr BP, followed by the Perikartin eruption at 9700 ± 100 cal yr BP. Although no stratigraphic contacts are evident with the other eruption deposits and there is no radiocarbon datable material in or below Dikkartin, its glass composition matches the regional S1 tephra dated to approximately 9000 cal yr BP, and this date can be assigned to the Dikkartin eruption. Distal correlations also confirm the widespread dispersal of the Karagüllü tephra, as it is identified as a cryptotephra layer in the Black Sea and Romanian lakes, indicating that the Central Anatolian eruptions dispersed volcanic ash over several hundred to more than a 1000 km across Europe and the eastern Mediterranean in the early Holocene. These correlations enhance the regional tephrochronological framework and underscore the need to reassess volcanic hazards in Central Turkey and surrounding areas.10 9 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , A cross-comparison of thermal infrared versus ultraviolet ground-based retrievals of SO2 masses during Strombolian explosions
(Strasbourg: Volcanica, 2018- Strasbourg: Presses Universitaires de Strasbourg, 2025-12-15); ; ; ; This study investigates sulfur dioxide (SO2) emissions from Stromboli’s explosive activity using ground-based remote sensing techniques. We analyze the SO2 mass derived from ultraviolet (UV) and thermal infrared (TIR) cameras, alongside explosion parameters and emitted products obtained from high-frequency thermal imaging. Our dataset (May 23–24, 2023) includes 49 explosions ranging from gas-dominated (Type 0) to bomb-dominated (Type 1) and ash-rich (Type 2). During non-explosive periods, UV and TIR SO2 masses are generally comparable, whereas explosions show systematic TIR overestimation relative to UV. The TIR/UV deviation scales with plume temperature and eruption type, reflecting TIR sensitivity to thermal radiation and ash scattering, while UV retrievals remain largely temperature-independent. Our results emphasize the need for temperature-based corrections in TIR retrievals, and support integrated multi-sensor approaches for robust, real-time monitoring of volcanic gas emissions.6 28 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , In flight fragmentation reduces bomb size range and hazard during explosive volcanic eruptions
(London: Springer Nature London: Nature Publishing Group, 2025-10-22); ; ; ; Coarse, molten fragments of low-viscosity magma (volcanic bombs) that are ejected during explosive volcanic eruptions represent a source of hazard and a record of past eruptions. After ejection, bombs tend to break up during flight, but how much this affects their dispersal is unclear. Here, we use highspeed and high-definition imaging of three recent explosive eruptions to parameterise the in-flight fragmentation of bombs. We estimate that in-flight fragmentation involves 73% of bombs coarser than ∼ 0.2 m, with bomb-to-bomb collisions and aerodynamic frictional (drag) forces being the main drivers of in-flight fragmentation, depending on eruption style. Drag force increases with increasing bomb velocity and size, selectively fragmenting the coarsest and fastest bombs, acting as a selflimiting factor for the range and energy of falling bombs. These findings pose a quantitative basis for incorporating the in-flight fragmentation processes into the interpretation of volcanic deposits and for modelling hazards from falling bombs. Volcanic bombs are coarse (> 64 mm), variably molten fragments of low-viscosity magma ejected during explosive volcanic eruptions. Volcanic bombs travel along approximately ballistic trajectories, mainly controlled by the ejection velocity and angle acquired at the vent and friction with the surrounding fluid (volcanic gas jet or surrounding atmosphere) 1-5. Ejection angle and velocity being the same, coarser bombs will travel further due to their higher mass-to-surface ratio and corresponding higher inertia-to-friction ratio. In the eruption of relatively hot and low-viscosity mafic magmas, such as basalt, bombs remain mostly fluid during their ballistic transport. This increases the potential for in-flight deformation and fragmentation to alter bomb size, trajectory, and, eventually, the associated hazards and deposit features 5-11. Despite its relevance, however, in-flight bomb break-up is poorly described qualitatively and quantitatively, with a few exceptions 5,12. The fallout of volcanic bombs represents one of the most significant hazards in the range of a few kilometres from the vent of explosively erupting volcanoes, often associated with small and unexpected eruptions 13-15. It affects both visiting tourists and scientists conducting measurements in high-risk zones, with examples from Stromboli and Etna (Italy) and Yasur (Vanuatu) volcanoes 16-19. Bombs have been documented to reach distances of 2-5 km from the vent, and up to 10 km 7,13,17,20-22 Bombs also pose a significant economic threat, damaging infrastructure and buildings 14,17,23,24. Field-and drone-based studies on the dispersal and grain-size distribution of bomb deposits are crucial to understand the dynamics of past eruptions and the definition of hazard maps 7,12,19,22,25-31. Ballistic dispersion modelling is often used for hazard forecast and to infer exit velocity during past explosive eruptions 2,4,26,32-34. Up to now, however, neither modelling or deposit interpretation schemes take into account in-flight bomb fragmentation. Here, we analysed high-speed and high-definition videos of three recent explosive eruptions to qualitatively and quantitatively characterise the in-flight fragmentation of fluidal bombs. Case studies To cover a range of volcanoes and styles in low-viscosity magma explosive activity, four case studies are the focus of this inquiry (Fig. 1). The first two case studies are the fountaining activity (Fig. 1a) and the spattering8 16 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Multiple mush generations provide insight into the longevity of openconduit basaltic volcanoes
(London: Springer Nature London: Nature Publishing Group, 2025-07-01); ; ; ; Hu, HaiyangInvestigating the dynamics and timescales of magmatic processes in open-conduit basaltic volcanoes is crucial for improving our understanding of explosive eruptions and better assessing volcanic hazards. Among these processes, the role of mush disaggregation and remobilisation within the plumbing system remains rather underexplored. This study examines the longevity and dynamics of the mush system beneath Stromboli volcano (Aeolian Islands, Southern Italy), whose persistent activity results from variable degrees of interaction between different magmatic components. The complex zoning patterns of plagioclase phenocrysts from 2003 to 2021 eruptions have been interrogated by combining in-situ Sr isotope compositions, thermometric modelling, and Mg diffusion chronometry. Our findings shed new light on the physicochemical changes within the plumbing system, the timescales of crystal residence in the shallow reservoir, and the timing of magma recharge events. Timescales of mafic recharges and mush remobilisations recorded by plagioclase suggest rapid magma-mush dynamics during violent explosions but more sluggish during normal activity. Sr isotope heterogeneities in plagioclase reveal that multiple mush generations at Stromboli have been active over millennia, with remobilisation events and crystal recycling driven by mafic magma recharges from depth. This is further supported by a complementary in-situ investigation of clinopyroxene phenocryst cores. A previously unseen, prehistoric, highly radiogenic mush has been actively remobilised in recent years, pointing out that older components of open-conduit basaltic systems may persist longer than previously hypothesised.6 28 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Impact of cooling rate on rheology and emplacement dynamics of basaltic lavas: Insights from the January 2024 Sundhnúksgígar eruption (Iceland)
(Elsevier BV:PO Box 211, 1000 AE Amsterdam Netherlands:011 31 20 4853757, 011 31 20 4853642, 011 31 20 4853641, EMAIL: nlinfo-f@elsevier.nl, INTERNET: http://www.elsevier.nl, Fax: 011 31 20 4853598, 2025-06-30); ; ; ; The 2023-2024 eruptions at Sundhnúksgígar in Iceland produced tholeiitic basaltic lavas that traveled at high velocities, affecting vast areas. Under such conditions, disequilibrium crystallization can play a fundamental role in modulating the lava flow dynamics and inundation capacity. To investigate this phenomenon, we carried out a comprehensive rheological characterization of the Sundhnúksgígar basalt, analyzing both the liquid phase and the crystal-bearing suspensions under disequilibrium conditions (cooling rates ranging from 0.1 to 10 • C/min) and near-equilibrium conditions (at fixed temperatures between 1242 and 1180 • C). Our results show that the cooling rate critically influences the extent and timescale of disequilibrium crystallization, thereby shaping the rheological evolution of the melt, leading to distinct deformation response of the crystal-bearing magmatic suspension. Compared to other basalts erupted worldwide, the Sundhnúksgígar melt exhibits two main features: i) an exceptionally low rate of viscosity increase induced by crystallization and ii) the ability to crystallize even at the highest cooling rates applied during the experiments. These characteristics may contribute to enhancing the efficiency of external crust formation, limiting heat loss from the inner portion of the lava flow, which consequently cools more slowly. Thermal insulation effects reduce the rate of viscosity increase during lava emplacement, a key factor in determining lava flow inundation potential. Our findings underscore the critical role of disequilibrium crystallization in governing the rheological evolution and emplacement dynamics of basaltic lavas, offering new insights into lava flow behavior.437 26 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Reconstructing the volcanic history of the Ulukıs ¸la Caldera: A collapse structure within the Hasandag Volcanic Complex, Central Anatolia (Turkey)
(Elsevier BV:PO Box 211, 1000 AE Amsterdam Netherlands:011 31 20 4853757, 011 31 20 4853642, 011 31 20 4853641, EMAIL: nlinfo-f@elsevier.nl, INTERNET: http://www.elsevier.nl, Fax: 011 31 20 4853598, 2025-04-16) ;Özsoy, Rengin; ;Bolós, Xavier ;Akkas, EfeThe Ulukıs ¸la Caldera is a collapse structure within the active Hasandag Volcanic Complex (Central Anatolia), situated along the southern branch of the Tuz Gölü Fault Zone (TGFZ). This study aims to reconstruct the volcanic history of the Ulukıs ¸la Caldera by characterising its associated pyroclastic deposits using tephrostratigraphy, glass chemistry (major and trace elements), and geochronological data (40 Ar/ 39 Ar and U-(Th)-Pb). Our findings reveal that the Ulukıs ¸la Caldera has undergone at least three major explosive rhyolitic eruptions, which formed the pyroclastic deposits of the Yenipınar Eruption (~442 ka), the Belbas ¸hanı Eruption (~400 ka), and the Ulukıs ¸la Eruption (~326 ka). The Yenipınar unit was produced by an unsteady eruption column originating from paleo-Ulukıs ¸la volcanic structure, that deposited pumice fallout layers and interbedded pyroclastic density current (PDC) deposits. The Belbas ¸hanı Eruption began with a Plinian column that deposited the Belbas ¸hanı Pumice fallout. This phase was followed by the emplacement of thick PDC deposits and co-ignimbrite lithic lag breccias during the collapse, which ultimately led to the formation of the Ulukıs ¸la Caldera. The volume of the Belbas ¸hanı deposits, including the pumice fallout and the caldera-forming ignimbrite, could reach up to 10 km 3 DRE (Dense Rock Equivalent), corresponding to an eruption of magnitude ~6. The Ulukıs ¸la Pumice resulted from a post-caldera eruption, which did not generate PDCs. The Ulukıs ¸la Caldera exhibits an elongated morphology, which is strongly influenced by the NW-SE alignment of the TGFZ. Based on this morphology and the regional tectonic setting, we conclude that the Ulukıs ¸la Caldera is a strike-slip/graben caldera. Reconstructing the volcanic history of this newly identified caldera is essential for enhancing our understanding of the Hasandag Volcanic Complex. Our findings offer valuable context for future eruptive behaviour, improving the hazards assessment for potential caldera collapses, and contribute to mitigating associated risks.6 27 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Cement vs aggregates and textures of aggregates in a mortar: Comparative image analysis methods and analytical protocols
The types, abundance and texture of phases are crucial for reconstructing the manufacturing of historical and contemporary construction materials such as mortars. Commonly, these data are obtained on polished mesoscopic and/or thin section surfaces and imaged with several techniques. Here, a thin section from an already well-characterised mortar was analysed to unveil the amount (area%) of cement paste vs aggregates, plus the textural features of the aggregates. The thin section was imaged by a high-resolution scanner (HRS), by transmission optical microscopy (TOM) and scanning electron microscopy (SEM). The single HRS image discriminates only quartz (qz) from cement+af+ss (af: alkali-feldspar, ss: sheetsilicates). The stitched TOM image distinguishes cement from aggregates, i.e. qz+af+ss, whereas the stitched SEM image discriminates cement, pores, qz and af+ss. The amount of cement vs aggregates and the area of the different aggregates determined by SEM is more accurate since it reflects chemical attributes. 2D Fuller curves were constructed considering different types of 2D dimensional parameters extracted from both TOM and SEM digital images. Intermediate dimensional parameters for both TOM and SEM had the best match with the 3D sieving Fuller curve. SEM shows the most detailed and adaptable recognition of cement to aggregate ratio and quantification of aggregate clasts, but it is timeconsuming and expensive. HRS is rapid but only crudely accurate. TOM is more accurate and less expedite than HRS; by contrast, TOM is faster than SEM but unable to distinguish different aggregate clasts with similar optical features.8 35 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , The kinetic effect induced by variable cooling rate on the crystal-chemistry of spinel in basaltic systems revealed by EPMA mapping
(Mineralogical Society of America, 2024-07-01) ;Gennaro, Emanuela; ; ; The crystal-chemical variations of spinels grown as a function of cooling rate (ΔT/Δt) were analyzed via X-ray electron-microprobe (EPMA) maps. Maps were collected serially by using a fixed distance. Spinels solidified from a tholeiitic MOR basaltic liquid (B100) cooled at cooling rates (ΔT/Δt) of 1, 7, 60, and 180 °C/h, between 1300 and 800 °C and at ambient P and fO2. As ΔT/Δt increases, the amount of spinel is invariably <5 area% and its size decreases. Compared to the previous data set collected by common single and selected EPMA analytical points (112 analyses), the kinetic effects induced by ΔT/Δt are here quantitatively captured by a large number of analyses (2052). The TiO2, Al2O3, MgO, and FeOtot show large compositional variations at low cooling rates (from 1 to 60 °C/h), and only the average TiO2 concentration shows a well-defined trend as a function of ΔT/Δt. However, calculated average cation amounts (apfu) unveil quantitative kinetic effects. When ΔT/Δt increases (from 1 to 180 °C/h), only Ti4+ shows a linear decreasing trend, whereas the other major Al3+, Fe3+, Fe2+, and Mg2+ cations alone are scattered. Conversely, the sums of trivalent (Al3++Fe3+) and divalent (Mg2++Fe2+) cations quantitatively capture the effect of the ΔT/Δt. These new outcomes could be the base of novel geospeedometers with significant implications in volcanology, geophysics, and material sciences in regard to silicate melt rheology on Earth. They should be extended to high-pressure, hydrated, and low oxygen fugacity conditions. Furthermore, the analytical approach used here to capture kinetic effects on spinel growth and compositions can be also applied to other crystalline phases grown from silicate liquids.6
