Skip to main content
The search returned 62 results
Now showing 1 - 10 of 62
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Reconstructing the Belbaşhanı Pumice Plinian eruption, Hasandağ Volcano, Turkey

    (2024)
    Özsoy, Rengin
    ;
    ; ;
    Akkaş, Efe
    ;
    Hasandağ volcano (Central Anatolia, Turkey) has recently underwent an increase in local seismicity and fumarolic activity since 2013. In the past, this volcano has produced multiple large explosive eruptions during the last million years. The Belbaşhanı Pumice is the product of a sub-Plinian to Plinian eruption dated at ~ 417 ± 20.5 ka (40 Ar/ 39 Ar). Here, we present a complete volcanological study including stratigraphy, glass chemistry, pumice morphology, geochronology, and eruption source parameters with the associated uncertainties, to characterize the Belbaşhanı Pumice eruption. The eruption involved a column of 18-29 km in height, with the main dispersal axis towards the northeast. A pumice layer up to ~ 17-m-thick accumulated in proximal deposits along the Belbaşhanı path, and up to 2-m-thick in medial-distal areas (~ 18 km northeast from the vent). The high and tubular vesicularity of the pumice clasts indicates that the Belbaşhanı eruption was predominantly magmatic. The bulk volume of the Belbaşhanı Pumice fallout deposit has been estimated as 0.5 and 8 km 3 (with ~ 2 km 3 being the mean value), which corresponds to Volcanic Explosivity Index (VEI) of at least 4 and up to 6. Both isopach and isopleth maps indicate that the volcanic vent may have been located at the intersection of the Tuz Gölü fault and Ulukışla caldera, within the Hasandağ volcanic complex. The glass composition of Belbaşhanı Pumice confirms that the eruption belongs to the Hasandağ magmatic system. The reconstruction of the Belbaşhanı Pumice eruption represents an essential baseline in providing volcanological constraints for further investigations of tephra fallout hazard assessment in Central Anatolia, especially considering that a new Plinian eruption cannot be ruled out at Hasandağ volcano in the future. The chemical and geochronological datasets presented here could aid in refining tephrochronological correlations, with the goal of synchronizing paleoenvironmental and paleoclimatic records alongside archaeological sites.
      8  94
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Reconstructing the volcanic history of the Ulukıs ¸la Caldera: A collapse structure within the Hasandag Volcanic Complex, Central Anatolia (Turkey)

    (Elsevier BV:PO Box 211, 1000 AE Amsterdam Netherlands:011 31 20 4853757, 011 31 20 4853642, 011 31 20 4853641, EMAIL: nlinfo-f@elsevier.nl, INTERNET: http://www.elsevier.nl, Fax: 011 31 20 4853598, 2025-04-16)
    Özsoy, Rengin
    ;
    ;
    Bolós, Xavier
    ;
    Akkas, Efe
    ;
    The Ulukıs ¸la Caldera is a collapse structure within the active Hasandag Volcanic Complex (Central Anatolia), situated along the southern branch of the Tuz Gölü Fault Zone (TGFZ). This study aims to reconstruct the volcanic history of the Ulukıs ¸la Caldera by characterising its associated pyroclastic deposits using tephrostratigraphy, glass chemistry (major and trace elements), and geochronological data (40 Ar/ 39 Ar and U-(Th)-Pb). Our findings reveal that the Ulukıs ¸la Caldera has undergone at least three major explosive rhyolitic eruptions, which formed the pyroclastic deposits of the Yenipınar Eruption (~442 ka), the Belbas ¸hanı Eruption (~400 ka), and the Ulukıs ¸la Eruption (~326 ka). The Yenipınar unit was produced by an unsteady eruption column originating from paleo-Ulukıs ¸la volcanic structure, that deposited pumice fallout layers and interbedded pyroclastic density current (PDC) deposits. The Belbas ¸hanı Eruption began with a Plinian column that deposited the Belbas ¸hanı Pumice fallout. This phase was followed by the emplacement of thick PDC deposits and co-ignimbrite lithic lag breccias during the collapse, which ultimately led to the formation of the Ulukıs ¸la Caldera. The volume of the Belbas ¸hanı deposits, including the pumice fallout and the caldera-forming ignimbrite, could reach up to 10 km 3 DRE (Dense Rock Equivalent), corresponding to an eruption of magnitude ~6. The Ulukıs ¸la Pumice resulted from a post-caldera eruption, which did not generate PDCs. The Ulukıs ¸la Caldera exhibits an elongated morphology, which is strongly influenced by the NW-SE alignment of the TGFZ. Based on this morphology and the regional tectonic setting, we conclude that the Ulukıs ¸la Caldera is a strike-slip/graben caldera. Reconstructing the volcanic history of this newly identified caldera is essential for enhancing our understanding of the Hasandag Volcanic Complex. Our findings offer valuable context for future eruptive behaviour, improving the hazards assessment for potential caldera collapses, and contribute to mitigating associated risks.
      6  27
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Late Glacial-Holocene tephra from southern Patagonia and Tierra del Fuego (Argentina, Chile): A complete textural and geochemical fingerprinting for distal correlations in the Southern Hemisphere

    Explosive volcanoes from the southern Andes are able to disperse ash over wide areas of the Southern Hemisphere, potentially as far as Antarctica. With the aim of improving correlations between sources and tephra in southernmost South America and, possibly, Antarctica, this work presents new field, textural and geochemical data on tephra layers from southern Patagonia and Tierra del Fuego (Argentina and Chile). Major- and trace-element data, obtained on single glass shards allowed to identify tephra sources in Late Glacial-Holocene eruptions from Hudson, Reclus and Mt Burney volcanoes, located in the Southern and Austral Volcanic Zone of the Andean Cordillera. Twelve new radiocarbon age determinations of charcoals, peats and soils have further constrained the correlations between the studied tephra layers and known eruptions from Hudson, Mt Burney and Reclus volcanoes. Therefore, this study contributes to expand the geochemical dataset on volcanic glasses valuable for tephra correlations in South America, and improves the current tephrostratigraphic framework of this region. Furthermore, we revised literature data by compiling a database including Neogene-Quaternary volcanic tephra found in Antarctic ice cores, marine sediments, blue ice and continental outcrops as well as tephra produced by volcanic sources located in Antarctica and circum-Antarctic areas. This revision shows that Antarctic tephra can be correlated with confidence to Antarctic and circum-Antarctic (South Shetlands and South Sandwich Islands) volcanic sources, whereas correlations with South American sources are arguable, and a complete geochemical fingerprinting is needed for validation
      507  3
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Plagioclase crystal size distribution parameterization: A tool for tracking magma dynamics at Stromboli

    In this study we parameterize the textural attributes of plagioclase phenocrysts and microlites from nineteen pyroclasts ejected during mild to violent explosions at Stromboli over a timespan of ∼18 years, from 2003 to 2021. By allying kinetic and crystal size distribution principles, we document that the morphological stability of large-sized, euhedral phenocrysts is superimposed on an internal textural heterogeneity due to growth-dissolution phenomena associated with the input rate of hot, H2O-rich recharge magmas rising from depth. As a result, the volumetric plagioclase proportion, dominant size, and number of phenocrysts per unit volume decrease from mild to violent explosions responding to a more efficient magma mixing process via sustained injections of mafic magmas into the shallow reservoir. On the other hand, the crystallization of anhedral plagioclase microlites is controlled by fast growth kinetics taking place in the uppermost part of the conduit during magma acceleration towards the surface. Under such highly dynamic crystallization conditions, the microlite number density closely depends on the increase of melt liquidus temperature via magma decompression and H2O exsolution. This mutualism allows to model the degassing rate and ascent velocity of magma under open-conduit flow regimes for the different eruptive styles, thereby supporting the idea that violent explosions at Stromboli are driven by sustained influxes of recharge magmas favoring strong acceleration (∼12–27 m/s), decompression (∼0.25–0.49 MPa/s), and H2O exsolution (∼0.005–0.01 wt%/s) before magma discharge at the vent.
      68  129
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Sutures in mafic pyroclasts

    (Berlin; Heidelberg; New York N.Y.: Springer, 2026-03-29) ; ; ; ;
    Micrometer-scale Fe (iron)-rich filaments are common in mafic pyroclasts, yet their origin remains debated. These filaments have been variably interpreted as sutured fractures in magma, the product of magma mingling, compositional boundary layers detached from plagioclase crystals, or oxide shells stripped from bubbles. Here, we compare new observations from several case studies with previous results, concluding that shared features point to a common origin of filaments in all eruptions. Key shared features of filaments are as follows: (1) Fe, Mg, and Ca enrichment; (2) variable degree of contortion, sharpness, and Fe oxide microlite content; (3) inclusion of small vesicles and microlite fragments; (4) transition into cracks and broken crystals; (5) connection to sharp concavities of vesicles and pyroclast edges; and (6) separation of regions within pyroclasts with distinct textures. Focused Ion Beam, micron-sized trenches cut perpendicular to the polished section, and X-ray computed microtomography images reveal that the two-dimensional filaments are complex three-dimensional surfaces resulting from magma suturing. These sutures form by fusing of molten, Fe-enriched surfaces, whether exposed crack surfaces within pyroclasts, the surfaces of colliding pyroclasts, or the surfaces of different portions of the same pyroclast folded over itself. During fusing, sutures entrap voids and crystal fragments present on the surfaces. After fusing, sutures evolve by diffusion, crystallization, and viscous deformation. Sutures witness the complex thermal and deformation history of pyroclasts during and after magma fragmentation and act as unique telltales of otherwise invisible processes that affect pyroclast final size, chemical composition, and vesicle and crystal size distributions.
      5  11
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A review of plagioclase growth rate and compositional evolution in mafic alkaline magmas: Guidelines for thermometry, hygrometry, and timescales of magma dynamics at Stromboli and Mt. Etna

    Mafic alkaline magmas, such as those feeding the persistent eruptive activity of Stromboli and Mt. Etna volcanoes in Italy, are dominated by the crystallization of plagioclase via cooling and degassing phenomena related to the dynamics of shallow crustal reservoirs and eruptive conduits. Because plagioclase textures and compositions are extremely sensitive to the changes of intensive variables in subvolcanic plumbing systems, the phenomenological variability of erupted crystals preserves detailed evidence of complex growth histories. From this point of view, we reappraise the textural maturation and compositional complexity of plagioclase by allying thermodynamic and kinetic principles to natural and experimental observations, with the purpose of drawing up guidelines for reconstructing magma dynamics in mafic alkaline volcanic settings. A multifaceted statistical method is adopted to parameterize the decay of crystal growth rate with increasing crystallization time, as relaxation kinetics prevails over melt supersaturation effects. This model parameterization is combined with the textural analysis of natural plagioclase crystals to quantify the residence time of phenocrysts in equilibrium with magmas at Stromboli and Mt. Etna and/or the timescale of rapid microlite growth during disequilibrium ascent of magmas within the conduit. The role played by temperature and melt-water content on plagioclase components and major cation substitution mechanisms is also evaluated under both isobaric-isothermal and decompression conditions. The emerging paradigm is that the influence of dissolved water on anorthite-albite exchange between plagioclase and melt is overwhelmingly mitigated by changes in temperature at conditions of P = 30–300 MPa, T = 1050–1150 °C, fO2 = NNO + 1.9-NNO + 2.3, and melt-H2O = 0.6–4.4 wt%. As a corollary, anorthite and albite melt activities are almost fully encapsulated in the variation of anhydrous melt components as the crystallization of plagioclase proceeds during magma cooling. Following this line of reasoning, we propose an integrated modeling approach to decipher complex zoning patterns in natural plagioclase phenocrysts from mafic alkaline eruptions. Key findings from our re-assessment of equilibrium, thermometric, and hygrometric models indicate that temperature and dissolved water can be iteratively estimated for different plagioclase textural patterns if crystals are sufficiently strongly zoned and probability-based criteria are applied to determine the maximum probability distribution from kernel density analysis.
      54  80
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The Role of Fault Rock Fabric in the Dynamics of Laboratory Faults

    Fault stability is inherently linked to the frictional and healing properties of fault rocks and associated fabrics. Their complex interaction controls how the stored elastic energy is dissipated, that is, through creep or seismic motion. In this work, we focus on the relevance of fault fabrics in controlling the reactivation and slip behavior of dolomite-anhydrite analog faults. We designed a set of laboratory experiments where we first develop fault rocks characterized by different grain size reduction and localization at normal stresses of σN = 15, 35, 60, and 100 MPa and second, we reload and reactivate these fault rocks at the frictional stability transition, achieved at σN = 35 MPa by reducing the machine stiffness. If normal stress is lowered this way, reactivation occurs with relatively large stress drops and large peak-slip velocities. Subsequent unstable behavior produces slow stick-slip events with low stress drop and with either asymmetric or Gaussian slip velocity function depending on the inherited fault fabric. If normal stress is raised, deformation is accommodated within angular cataclasites promoting stable slip. The integration of microstructural data (showing brittle reworking of preexisting textures) with mechanical data (documenting restrengthening and dilation upon reactivation) suggests that frictional and chemically assisted healing, which is common in natural faults during the interseismic phase, can be a relevant process in developing large instabilities. We also conclude that fault rock heterogeneity (fault fabric) modulates the slip velocity function and thus the dynamics of repeating stick-slip cycles.
      33  178
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Crystallization kinetics of clinopyroxene and titanomagnetite growing from a trachybasaltic melt: New insights from isothermal time-series experiments

    In order to investigate the role of crystallization kinetics in mafic alkaline systems, textural measurements, mineral compositional changes and diffusion modelling calculations have been carried out on isothermal time-series experiments. The data were obtained at 400 MPa and 1100 °C under anhydrous (nominally 0 wt% H2O) and hydrous (2 wt% H2O added) conditions. A synthetic trachybasaltic melt was first heated up to the superliquidus temperature of 1300 °C and then rapidly cooled at 80 °C/min down to 1100 °C. The final target temperature was kept constant over variable dwell times in the range of 0.5–24 h. Results from textural analysis indicate the attainment of fast crystal growth kinetics at the shortest experimental run duration, with early achievement of stable crystal sizes for clinopyroxene and titanomagnetite. The surface area to volume ratio weakly decreases with increasing dwell time, according to the development of euhedral crystal morphologies. Crystal growth rates are also observed to progressively decrease from 0.5 to 24 h. Due to the effect of fast growth kinetics, the morphological maturation of clinopyroxene progresses by attachment of dendrite branches, infilling and overgrowth phenomena, leading to the formation of well-faced and euhedral crystals. The kinetically-controlled cation exchange (Si + Mg) → (TAl + Fe3+) controls the clinopyroxene compositional variation, expanding the stability of Tschermak component at the expense of diopside. Conversely, titanomagnetite is characterized by an almost constant composition that, however, is enriched in incompatible Al and Mg cations, as typically observed under rapid crystal growth conditions. Titanomagnetite crystals show always euhedral morphology that develops by heterogeneous nucleation on early-formed clinopyroxene dendrites. Overall, the effect of undercooling causes strong supersaturation phenomena in the trachybasaltic melt, resulting in enhanced nucleation kinetics and fast attainment of a high crystallinity. As the dwell time increases, the bulk system tends to minimize the interfacial free energy between crystals and surrounding melt. This results in the progressive replacement of the early dendritic shapes developed in a diffusion-limited growth regime, by the formation of euhedral morphologies typical of interface-limited regimes that still retain the chemical evidences of the dendritic stage as complex zoning patterns in clinopyroxene.
      81  2
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    EPMA maps unveil the actual chemical variations and crystallisation sequence of pyroxene and plagioclase solidified from a basaltic liquid at variable cooling rates

    Crystal-chemical variations of pyroxene (px) and plagioclase (plg) have been analysed by X-ray electron-microprobe (EPMA) mapping to quantify their actual chemical dispersions. These phases were experimentally crystallised from a basaltic liquid (B100, MORB from Iceland) at cooling rates of 1, 7, 60 and 180 °C/h from 1300 °C down to 800 °C. Experiments were run at ambient conditions applying defined temperature paths mirroring characteristic cooling rates from innermost to outermost portions of metre- to centimetre-thick lavas, dikes and bombs emplaced under submarine to subaerial conditions. As the cooling rate increases from 1 to 180 °C/h, the run-products become progressively enriched in pyroxene and depleted in plagioclase, while spinel is invariably low (few area%) and glass is significant only at 180 °C/h. An increase of cooling rate generally leads to enrichment of Al2O3 and depletion of MgO in px, while the opposite behaviour is observed for plg; these trends are mirrored by calculated cations (apfu: atom per formula unit) and components. Average variations as a function of cooling rate are similar to those already observed through classical analysis performed by single point EPMA. However, the actual chemical distributions of CaO versus MgO, Al2O3 and FeOtot oxides unveil the presence of a wider range in pyroxene chemistry. In particular, one px (px-1, CaO-rich, diopsidic type) is present at all the applied cooling rates; a very low CaO-px (px-2, pigeonite or orthopyroxene type) is detected at 1 °C/h; and, finally, once more population of px (px-3, CaO-poor diopsidic type) appears at 60 and 180 °C/h. By contrast, plg analyses yield invariably identical compositions. Textural variations as a function of cooling rate and geothermometric estimations indicate that px-1 crystallised at high-T (or low ΔT), while plg mainly grew in the residual melt produced by the saturation of px. If only textures were evaluated, this order of segregation would like remain unrecognised since px at low cooling rates is smaller than plg. The abundance of phases, their crystal-chemical features, and their order of segregation can be regarded through a theoretical framework of a time-temperature-transformation (TTT) diagram. The most significant chemical variations are displayed by MgO and Al2O3 for both px and plg, which faithfully capture the evolution of cooling conditions. The chemical compositions of px-1 is close to the thermodynamic equilibrium only at 1 °C/h. As the cooling rates increase, the px chemistry indicates disequilibrium conditions. Finally, this study shows that as ΔT/Δt increases, the most abundant px (px-1) and plg are forced towards compositions that become progressively closer to those of the parental liquid.
      70  139
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    In situ investigation of the atomic structure of carbonate-silicate liquids at high pressure-temperature and spectroscopic characterization of the recovered quenched glasses

    Carbonate-silicate melts that originate in Earth’s interior are described as transitional melts which possess compositions intermediate between carbonatitic and basaltic end members. The covariation of key oxides between carbonatite and basalt (e.g., 10–35 wt% SiO2 and 40–10 wt% CO2, respectively) is expected to have a strong effect on liquid properties. However, due to their paucity both in the record of terrestrial rocks and as quenched glasses, their molecular structure has remained poorly explored to date. We investigated the atomic structure of a synthetic carbonate-silicate liquid with chemical composition within the CaO-MgO-Al2O3-SiO2- FeO-Na2O-ClO􀀀 -CO2 oxide system having 18.28 wt% SiO2 and 22.54 wt% CO2 using multi-angle energy dispersive X-ray diffraction at pressures (P) and temperatures (T) of 1.4 GPa/1815 ◦C, 2.6 GPa/1865 ◦C, 4.3 GPa/ 1990 ◦C, 4.4 GPa/1950 ◦C. The results show that the intermediate range ordering of the structure decreases with an increase of both P and T. Based on this study, the carbonate-silicate magmas at upper mantle P-T conditions are expected to increase their viscosities during their ascent through the mantle as a result of increasing intermediate range ordering upon cooling and decompression. Additionally, spectroscopic measurements were carried out on the quenched glasses at ambient pressure using micro-Raman as well as micro-FTIR in reflection and transmission modes in the mid infrared range. High pressure investigation using micro-FTIR was also conducted. The distribution of Qn species obtained by deconvolution of the Raman spectra within the aluminosilicate region confirms the depolymerized nature of the quenched glasses as inferred by the low viscosities of the corresponding liquids; peculiar characteristics of the C vibrations would suggest a distorted environment surrounding the network modifying CO2/3- anion. No evidence of molecular CO2 was detected. Notably, we find evidence of both dissolved molecular CO and CO linked to a metal cation forming carbonyl complexes in the quenched glasses at P-T-fo2 conditions compatible with a hot Archean upper mantle. This suggests a role for carbonate-silicate magmas as carriers of reduced gaseous C-O-H species towards the early atmosphere along with the mobilization of PGE-elements.
      6  20