Skip to main content
The search returned 59 results
Now showing 1 - 10 of 59
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    An experiment on earthquake size distribution estimations reveals unexpected large epistemic uncertainty across methods

    (-UK: John Wiley & Sons, Inc. -[Oxford]: Blackwell Science., 2025-05-28) ; ; ; ;
    The earthquake size distribution is well described by the Gutenberg Richter Law, controlled by the b-value parameter. In recent decades, a great variety of methods for estimating the b-value have been proposed by the scientific community, despite the simplicity of this relationship. All these methods underlie the different views of individual modellers and, therefore, often generate inconsistent results. In thisstudy, we perform a seismological experiment in which we compare different, commonly adopted, methodologies, to estimate the completeness magnitude and the b-value, for seismicity in Central Italy. The intermethod differences are on average equal to 0.4 and 0.3, for Mc and b, respectively, but reach much larger values, especially during more intense seismic activity. Thisshowsthat epistemic uncertainty in the b-value plays a more crucial role than intramethod uncertainties, opening new perspectives in the interpretation of discrepant, single studies.
      11  38
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Low-strength shear zone in the western Makran subduction zone, southeastern Iran: insights from a receiver function analysis

    To understand the seismic hazard of a subduction zone, it is necessary to know the geometry, location and mechanical characteristics of the interplate boundary below which an oceanic plate is thrust downward. By considering the azimuthal dependence of converted P-to-S (Ps) amplitudes in receiver functions, we have detected the interplate boundary in the Makran subduction zone, revealing significant seismic anisotropy at the base of the accretionary wedge above the slab before it bends down beneath the Jaz Murian basin. This anisotropic feature aligns with a zone of reduced seismic velocity and a high primary/secondary wave velocity ratio (Vp/Vs), as documented in previous studies. The presence of this low-velocity highly anisotropic layer at the base of the accretionary wedge, likely representing a low-strength shear zone, could possibly explain the unusually wide accretionary wedge in Makran. Additionally, it may impact the location and width of the locked zone along the interplate boundary.
      38  105
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Seismic source identification of the 9 November 2022 Mw 5.5 offshore Adriatic sea (Italy) earthquake from GNSS data and aftershock relocation

    The fast individuation and modeling of faults responsible for large earthquakes are fundamental for understanding the evolution of potentially destructive seismic sequences. This is even more challenging in case of buried thrusts located in offshore areas, like those hosting the 9 November 2022 Ml 5.7 (Mw 5.5) and ML 5.2 earthquakes that nucleated along the Apennines compressional front, offshore the northern Adriatic Sea. Available on- and offshore (from hydrocarbon platforms) geodetic observations and seismological data provide robust constraints on the rupture of a 15 km long, ca. 24° SSW-dipping fault patch, consistent with seismic reflection data. Stress increase along unruptured portion of the activated thrust front suggests the potential activation of longer portions of the thrust with higher magnitude earthquake and larger surface faulting. This unpleasant scenario needs to be further investigated, also considering their tsunamigenic potential and possible impact on onshore and offshore human communities and infrastructures.
      64  47
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Lithosphere Structure, Processes, and Physical State of the Alpine‐Apennine System

    Abstract Tomographic images of the lithosphere are the first step to constrain the evolution of mountain belts and their interaction. By inverting new high-quality P- and S-wave arrivals that sample the entire lithosphere, we determined Vp and Vp/Vs models with reliable resolution in the critical depth range (40–80 km) where plates of the central Mediterranean area interact. This data set yields homogeneous representation of the 3D structure over a critical area at a regional scale. Here, we show that the Alps derive from a laterally continuous underthrusting of the European plate and that the Adria lithosphere was delaminated after the collision. Tomograms resolve the lateral changes of the continental versus oceanic subduction along the Alpine belt and identify original evidence of fluids beneath the orogens able to facilitate the current deformation. Plain Language Summary A high resolution imaging of the lithosphere/asthenosphere system is crucial to understand tectonic processes of orogens and subductions. The Alpine chain is an exemplary case of complexity, with its lateral heterogeneity and changes. The largest seismic array ever developed in the Alpine chain (Alparray Seismic Network) has enabled the creation of a high-quality seismic data set contributing to new images of the entire central Mediterranean area. The novelty of this work lies in the enhanced resolution of velocity anomalies in a critical depth range (35–80 km) and with optimal homogeneity at the regional scale. The new 3D Vp and Vp/Vs models allow us to get insights into many open questions about the structure and evolution of the circum-Mediterranean orogens.
      56  187
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Anisotropic gradients in Iran: Quasi-Love waves illuminate the deep structure and deformation style of the Zagros, Alborz, and Kopet Dagh

    We investigate the presence of the quasi-Love wave (qL) at 51 seismic stations of a temporary seismic network across the western Arabia-Eurasia collision zone. We quantify the intensity of the qL observations from the April 12, 2014 Solomon Islands earthquake by calculating the peak-to-peak amplitude ratios of the qL and Love waves, and compare them with predicted qL intensities from previous shear-wave splitting results. We determine the polarity, timing, and period-dependence of the qL observations within the period range of 50–100 s. Our analysis reveals that the qL observations at stations in the Zagros and Alborz mountain belts exhibit opposite characteristics. In contrast to the Alborz stations, the intensity of qL observations at the Zagros stations exhibits relatively negligible dependence on the period, while their receiver-scatterer distances are considerably period dependent. We approximately locate the anisotropic gradients that generate the qL waves. Our results suggest that a lithospheric gap is responsible for the shallow and abrupt variation in the belt-parallel trend of fast-axis orientations in the westernmost part of the Zagros. Additionally, the period/depth dependence of the anisotropic gradients along the boundary between the central Zagros and central Iran provides insight into the variation in the downward dip of the Arabian lithosphere. The anisotropic gradient located to the north of the Doruneh fault in eastern Iran indicates its role as a major shear zone and lithospheric boundary. Finally, we observe that the spatial distribution of the anisotropic gradient in northeastern Iran matches the higher strain rate areas in the Kopet Dagh Mountains, suggesting coupling between the lithospheric mantle and crust in that region.
      118  114
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Source-Parameter Estimation after Attenuation Correction through the Use of Q Tomography

    The measurement of earthquake source parameters is affected by large uncertainties, and different approaches lead to large variability in results. One crucial aspect is the trade-off between attenuation (Q) and corner frequency (fc ) in spectral fitting: The source corner frequency, inversely proportional to the fault size, can be severely masked by attenuation and site effects. In this article, we describe a method to solve the trade-off based on the fit of displacement spectra to find the source characteristics (corner frequency, f c , and the signal moment, Ω0) and the single-station attenuation operator (t ), in addition to the site response. We follow a parametric approach based on the use of 3D Q seismic tomography and a bootstrap-based method for selecting the best spectra fit. The correction of attenu- ation with synthetic values derived by 3D attenuation tomography efficiently deals with the trade-off between source and path terms, leading to small uncertainties in the deter- mination of source unknowns (f c and signal moment, Ω0 ), thus yielding constrained esti- mates of source parameters for low- to medium-magnitude earthquakes. We show an application to the Emilia 2012 seismic sequence, for which we computed the source param- eters for 1240 aftershocks (from an initial dataset of 1748) with local magnitude ranging from 2.0 to 4.7 using the spectral fit from P and S waves. About 80% of stress-drop esti- mations are characterized by relatively low uncertainties (within 20% of the estimated values), with maximum values of about 40% for the remaining 20%. The attenuation cor- rection is effective to determine source parameters for small-magnitude earthquakes; hence, we obtain reliable estimates of source parameters for the entire aftershock sequence. This approach gives the opportunity to infer the mechanical state of a complete fault system by taking advantage of the larger number of low-magnitude events (with respect to the largest ones) that always follow a major earthquake.
      39  284
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Moho depths beneath the European Alps: a homogeneously processed map and receiver functions database

    We use seismic waveform data from the AlpArray Seismic Network and three other temporary seismic networks, to perform receiver function (RF) calculations and time−to−depth migration to update the knowledge of the Moho discontinuity beneath the broader European Alps. In particular, we set up a homogeneous processing scheme to compute RFs using the time-domain iterative deconvolution method and apply consistent quality control to yield 112,205 high-quality RFs. We then perform time−to−depth migration in a newly implemented 3D spherical coordinate system using a European-scale reference P and S wave velocity model. This approach, together with the dense data coverage, provide us with a 3D migrated volume, from which we present migrated profiles that reflect the first-order crustal thickness structure. We create a detailed Moho map by manually picking the discontinuity in a set of orthogonal profiles covering the entire area. We make the RF dataset, the software for the entire processing workflow, as well as the Moho map, openly available; these open-access datasets and results will allow other researchers to build on the current study.
      203  218
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Minimum 1D Vp and Vp/Vs Models and Hypocentral Determinations in the Central Mediterranean Area

    Minimum 1D velocity models and station corrections have been computed for the central Mediterranean area using two main data sets. The first one consists of accurate first arrival‐time readings from 103 seismic events with magnitude (ML)≥3.5 recorded by the Italian National Seismic Network (RSN) and the AlpArray Seismic Network (AASN) in the period 2014–2021. Earthquakes were selected on the basis of their spatial distribution, epicentral distance to the nearest seismic station, and maximum distance traveled by Pn and Sn phases. This fine selection of high‐quality data combined with the spatial density of the AlpArray seismic stations was decisive in obtaining high resolution for upper mantle velocity, especially in the Alpine belt. To obtain a denser coverage of crustal rays, we extended the first data set with P and S arrivals of local earthquakes from Istituto Nazionale di Geofisica e Vulcanologia (INGV) bulletin data (2016–2018). A total of 75,807 seismic phases (47,183 P phases and 28,264 S phases) have been inverted to calculate best‐fit 1D velocity models, at regional and local scales. We then test the performance of the optimized velocity models by relocating the last four years of seismicity recorded by INGV (period 2017–2020). The computed velocity models are very effective for routine earthquake location, seismic monitoring, source parameter modeling, and future 3D seismic tomography.
      259  2
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Seismic swarms in the Pollino seismic gap: Positive fault inversion within a popup structure

    Seismic swarms frequently occur along continental fault systems and their relation with large earthquakes is often contradictory. Such a case is documented in the Pollino mountain range of southern Italy, a decoupling zone where the belt-normal stretching drastically rotates accommodating the differential SE-retreat of the Ionian slab. The paucity of historical large earthquakes has led to hypothesize the presence of a seismic gap. A long- lasting seismic swarm that climaxed with a ML = 5.2 earthquake in October 2012 was therefore thought as a possible signal of an impending large earthquake filling the gap. Seismicity data collected during a 4-years long monitoring are a powerful microscope to look through the seismic swarm. In this study, we present accurate relocations for 2385 earthquakes and high- resolution Vp and Vp/Vs models of the fault system. Seismicity occurred on two separate normal faults that were formerly part of a thrusts and back-thrusts system, originally formed as a pop-up at restraining bends of the Pollino fault, a wrench fault system that inverted the original left lateral sense of slip accommodating a differential motion induced by the southward retreat of the Ionian slab.
      251  51
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The 2011–2014 Pollino Seismic Swarm: Complex Fault Systems Imaged by 1D Refined Location and Shear Wave Splitting Analysis at the Apennines–Calabrian Arc Boundary

    In the years between 2011 and 2014, at the edge between the Apennines collapsing chain and the subducting Calabrian arc, intense seismic swarms occurred in the Pollino mountain belt. In this key region, <2.5mm/yr of NE-trending extension is accommodated on an intricate network of normal faults, having almost the same direction as the mountain belt. The long-lasting seismic release consisted of different swarm episodes, where the strongest event coinciding with a ML 5.0 shock occurred in October 2012. This latter comes after a ML four nucleated in May 2012 and followed by aseismic slip episodes. In this study, we present accurate relocations for ∼6,000 earthquakes and shear-wave splitting analysis for ∼22,600 event-station pairs. The seismicity distribution delineates two main clusters around the major shocks: in the north-western area, where the ML 5.0 occurred, the hypocenters are localized in a ball-shaped volume of seismicity without defining any planar distribution, whilst in the eastern area, where the ML 4.3 nucleates, the hypocenters define several faults of a complex system of thrusts and back-thrusts. This different behavior is also imaged by the anisotropic parameters results: a strong variability of fast directions is observed in the western sector, while stable orientations are visible in the eastern cluster. This tectonic system possibly formed as a positive flower structure but as of today, it accommodates stress on normal faults. The deep structure imaged by refined locations is overall consistent with the complex fault system recently mapped at the surface and with patterns of crustal anisotropy depicting fractures alignment at depth. The possible reactivation of inherited structures supports the important role of the Pollino fault as a composite wrench fault system along which, in the lower Pleistocene, the southward retreat of the ionian slab was accommodated; in this contest, the inversion of the faults kinematics indicates a probable southward shift of the slab edge. This interpretation may help to comprehend the physical mechanisms behind the seismic swarms of the region and defining the seismic hazard of the Pollino range: nowadays a region of high seismic hazard although no strong earthquakes are present in the historical record.
      1191  75