Falco, Luigi
Preferred name
Falco, Luigi
Email
luigi.falco@ingv.it
Staff
staff
ORCID
Scopus Author ID
36494173200
57 results
Filters
Settings
The search returned 57 results
Now showing 1 - 10 of 57
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The new seismic catalog of the Gargano area (Southern Italy) after a decade of seismic monitoring by OTRIONS network
(Göttingen: Copernicus Publications, 2026-05-13) ;Ferreri, Andrea Pio; ;Giannuzzi, Rossella; The Gargano Promontory (hereafter GP) has attracted the attention of seismologists in recent years for its peculiarities regarding the high rate of low-magnitude seismicity and focal depths in the lower crust. These peculiarities have been highlighted thanks to the new data provided by the OTRIONS seismic network (hereafter OT), installed in 2013 in the GP area, consisting of 15 short-period seismometers, thanks to a fruitful collaboration between UniBa (University of Bari Aldo Moro) and INGV (Istituto Nazionale di Geofisica e Vulcanologia). The first available seismic catalog referred to the first 7 years of the network operation (2013–2018) and suffered from some technological problems of the acquisition system. Thanks to improvements in the data transmission system, these problems were overcome in 2019 and now the OT network data are available in real time. In order to include the most recent seismicity and to cover the temporal gaps existing in the previous catalog, we thoroughly reviewed the 24 h seismic recordings, collected over the decade after the installation, by employing an automatic detect and picking software (CASP, Complete Automatic Seismic Processor). More than 7100 seismic events were initially identified. Through careful manual review, approximately 60 % were confirmed as local earthquakes, and the others were recognized as quarry blasts or false/poorly-located events. Manual review significantly improved the quality of P- and S-phase picking, and consequently led to more accurate earthquake locations, using both linearized and nonlinear algorithms. The manual review resulted in two catalogs, both released on Mendeley Data (Ferreri et al., 2026) (https://doi.org/10.17632/nhfvx7ysxw.6). This study highlights the value of automatic analysis for compiling a seismic catalog, suggesting that the manual review is still necessary. The quality of the catalogs was assessed in detail using statistical parameters and a new formula for the location quality. The completeness magnitude of the new catalogs is as low as 0.82. The noise affecting the network was also evaluated. This study confirms the importance of the OT local network for seismic hazard analysis and provides a useful dataset for seismotectonic and geophysical studies in a long under-monitored region.4 7 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , New Advances Towards Early Warning Systems in the Mediterranean Sea Using the Real-Time RING GNSS Research Infrastructure
(Basel : Molecular Diversity Preservation International, 2025-11-07); ; ; ; Du, ShiNowadays, information obtained through Global Navigation Satellite Systems (GNSSs) is widely employed in modern geodesy. The Precise Point Positioning (PPP) approach, which leverages signals from multiple GNSS constellations (e.g., GPS, GLONASS, Galileo, and BeiDou), enables high-precision positioning—crucial for seismic monitoring and early tsunami warning systems (EEWs). Recent advances, such as increased satellite availability and additional frequency bands, have significantly improved PPP performance, particularly in terms of positioning accuracy and convergence time. This study focuses on the Rete Integrata Nazionale GNSS (RING) network, managed by the Istituto Nazionale di Geofisica e Vulcanologia (INGV), which comprises dual-frequency GNSS receivers distributed across the Italian peninsula and parts of the Mediterranean Basin. We evaluate the performance show that the PPP-RA approach enhances positioning accuracy and reduces convergence time, especially when comparing GPS-only datasets with those incorporating full multi- GNSS configurations. For the daily solution, in the optimal setup (i.e., full GNSS with RA), real-time solutions exhibit average accuracies of 2.05, 1.73, and 4.35 cm for the North, East, and vertical components, respectively. Sub-daily accuracies’ analysis, using 300 s sliding windows, showed even better uncertainties, exhibiting median values of 0.41, 0.32, and 0.9 cm for the North, East and vertical components, respectively. Based on the outcomes for network-wide sub-daily accuracies, 84% of the stations demonstrate average errors within 2 cm for North and East components and 3 cm for the vertical one. The analysis on the convergence time after data gaps occurred during the investigation period shows that 87% of the RING stations experienced convergence times lower than five minutes in the GNSS PPP-RA solution. These findings underscore the potential of RT-GNSS RING data for enhancing seismic monitoring and early warning systems, particularly in tectonically active regions. of the RING data (GPS and GNSS) acquired in a period of three weeks between 19 January 2024 and 9 February 2024 and analyzed in real time by using different PPP strategies: standard PPP and PPP with Regional Augmentation (PPP-RA). The preliminary results6 14 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Seismic survey in an urban area: the activities of the EMERSITO INGV emergency group in Ancona (Italy) following the 2022 M<sub>w</sub> 5.5 Costa Marchigiana–Pesarese earthquake
(Copernicus GmbH (Copernicus Publications)., 2025-05-19); ; ; ; This paper describes data and preliminary analyses made by the Istituto Nazionale di Geofisica e Vulcanologia (INGV) emergency task force EMERSITO, devoted to site effects and seismic microzonation studies, following the 9 November 2022 strong earthquake localized in the Adriatic Sea (Italy). Considering the affected area, EMERSITO deployed, from November 2022 to February 2023, a temporary seismic network of 11 stations (net code 6N) which sampled different geological units in the urban area of Ancona.12 20 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Real-time GPS vs full-GNSS time series accuracies estimations at RING INGV research infrastructure
(Copernicus GmbH, 2025-01-20); ; ; ;Shi, DuThe RING (Rete Integrata Nazionale GNSS) is a research infrastructure developed for accurately measuring deformations at different spatial and temporal scales in the Eurasia-Africa plate boundary region (Avallone et al., 2010). Currently, the RING network (http://ring.gm.ingv.it/) is composed of 280 real-time transmitting remote sites, 70% of which are now equipped with full-GNSS (GPS, Galileo, Glonass and Beidou) instrumentation. The data streaming, in standard RTCM v.3 format, from these sites to the acquisition centre in southern Italy (Sezione Irpinia, Grottaminarda, AV) is managed by a tuned Ntrip Caster (https://igs.bkg.bund.de/ntrip/bkgcaster). The typical magnitude of the strongest events that occurred in the last century in this region (5.5-7) should require high accuracy (2-3 cm) GPS/GNSS time series to properly observe both static and dynamic coseismic displacements and, then, to properly model the earthquake source. Furthermore, the detection of any afterslip or, in general, any transient deformation should require even better accuracy (< 2 cm). The real-time GPS/GNSS data analysis has been implemented by means of the RTPPP software developed by GFZ (Ge et al., 2012). This software allows the determination of various Precise Point Positioning products with increasing accuracy (standard PPP, PPP with ambiguity resolution [PPP-AR], and PPP with regional augmentation [PPP-RA]). We performed some preliminary investigations on different (limited in time) datasets and we compared GPS-only and full-GNSS results. In the case of GPS-only PPP-RA solutions, the accuracies estimated on 24-hour data for the whole network amount up to 1.7 cm and 6 cm for the horizontal and vertical components, respectively. In the case of full-GNSS solutions, the same approach (PPP-RA) allowed an improvement of about 22% on both horizontal and vertical components (1.3 cm and 4.6 cm). Furthermore, we compared both GPS-only and full-GNSS solutions with another method, i.e. by using a short-term accuracy analysis. Using 60-s or 120-s sliding windows, that should better simulate the time span for detecting coseismic displacements, we can achieve 0.5 cm and 1 cm for horizontal and vertical components, respectively, for GPS-only solutions, and 0.3 cm and 0.5 cm for full-GNSS ones. Finally, for a few examples of earthquakes that recently occurred in Italy, we will show comparisons between post processed high-rate solutions carried out by Gipsy-Oasis II solutions and those obtained by RTPPP simulating real-time time series. The obtained accuracies will demonstrate the reliability of the RING infrastructure real-time GNSS solutions for early warning and rapid response applications.6 13 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Seismic-electromagnetic signals from two monitoring stations in Southern Italy: Electromagnetic time series release
(2024-06) ;Ventola, Ivana; ; ; The seismic-electromagnetic phenomenon entails the generation of transient electromagnetic signals, which can be observed both simultaneously (co-seismic) and preceding (pre-seismic) a seismic wave arrival. Following the most accredited hypothesis, these signals are mainly due to electrokinetic effects, generated on microscopic scale in porous media containing electrolytic fluids. Thus, the seismic-electromagnetic signals are expected to be suitable for the detection and tracking of crustal fluids. Despite the growing interest in this phenomenon, there is a lack of freely available observational database of earthquake-related electromagnetic signals recorded at co-located seismic and magnetotelluric stations. To fill this gap, we set up two multicomponent monitoring stations in two seismically active areas of Southern Italy: the Gargano Promontory and the High Agri Valley. This work is both aimed to systematically analyse earthquake-generated seismic-electromagnetic recordings and to make the collected database accessible to the scientific community.8 93 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , New Concept of Smart UAS-GCP: A Tool for Precise Positioning in Remote-Sensing Applications
Today, ground control points (GCPs) represent indispensable tools for products’ georeferencing in all the techniques concerning remote sensing (RS), particularly in monitoring activities from unmanned aircraft system (UAS) platforms. This work introduces an innovative tool, smart GCPs, which combines different georeferencing procedures, offering a range of advantages. It can serve three fundamental purposes concurrently: (1) as a drone takeoff platform; (2) as a base station, allowing the acquisition of raw global navigation satellite system (GNSS) data for post-processed kinematic (PPK) surveys or by providing real-time GNSS corrections for precision positioning; (3) as a rover in the network real-time kinematic (NRTK) mode, establishing its position in real time with centimetric precision. The prototype has undergone testing in a dedicated study area, yielding good results for all three geodetic correction techniques: PPK, RTK, and GCP, achieving centimeter-level accuracy. Nowadays, this versatile prototype represents a unique external instrument, which is also easily transportable and able to connect to the GNSS RING network, obtaining real-time positioning corrections for a wide range of applications that require precise positioning. This capability is essential for environmental applications that require a multitemporal UAS-based study. When the real-time RING data are accessible to the scientific community operating in RS surveying, this work could be a helpful guide for researchers approaching such investigations.106 144 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , SEISMONOISY: A Quasi-Real-Time Seismic Noise Network Monitoring System
This paper introduces SEISMONOISY, an application designed for monitoring the spatiotemporal characteristic and variability of the seismic noise of an entire seismic network with a quasi-real-time monitoring approach. Actually, we have applied the developed system to monitor 12 seismic networks distributed throughout the Italian territory. These networks include the Rete Sismica Nazionale (RSN) as well as other regional networks with smaller coverage areas. Our noise monitoring system uses the methods of Spectral Power Density (PSD) and Probability Density Function (PDF) applied to 12 h long seismic traces in a 24 h cycle for each station, enabling the extrapolation of noise characteristics at seismic stations after a Seismic Noise Level Index (SNLI), which takes into account the global seismic noise model, is derived. The SNLI value can be used for different applications, including network performance evaluation, the identification of operational problems, site selection for new installations, and for scientific research applications (e.g., volcano monitoring, identification of active seismic sequences, etc.). Additionally, it aids in studying the main noise sources across different frequency bands and changes in the characteristics of background seismic noise over time.87 100 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Monitoring sandy shorelines using SAR imagery and LiDaR measurements
(IEEE, 2023-10-04); ; ; ; This study is to demonstrate the ability of Cband Synthetic Aperture Radar (SAR) satellite data to extract the coastline and monitor coastal erosion against ancillary information extracted by the Unmanned Aerial System (UAS)based Light Detection and Ranging (LiDaR) measurements. Experiments are carried out on a key data set collected over the Ionian coast of Basilicata region, in the South of Italy. Preliminary results demonstrate the added-value provided in the framework of coastal area observation by integrating spaceborne radar and drone-based optical sensor technologies.11 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , GNSS-RTT (GNSS - Real Time Tracker), a Software System For Real Time GNSS Data Acquisition, Processing And Visualization
(2023-07-11); ;Famiglietti, Nicola Angelo; ; During any emergency response, the real-time GNSS data analysis strategies based on differential approach (i.e. Real Time Kinematic) needs some crucial a-priori information on the reference stations. In addition to their location in an undeformed area, this choice can be also influenced by other parameters (RMS of the time series, battery voltages, transmission on/off, number of visible satellites, etc.). For this reason, we developed an intelligent homemade algorithm BC-RTK (Base Choice - RTK) able to choose the more reliable baselines to potentially provide the best RTK results, it defines stations’ priority to the real-time GNSS analysis whose results are stored in a time-series database. This algorithm is a part of a software, called GNSS-RTT(Global Navigation Satellite System - Real Time Tracker), developed in 2022/2023. It is an open source software that can be either connected to different GNSS receivers through a different type of connection (Tcp/ip, Ntrip, etc.) or linked to a Ntrip Caster. For the solutions, it is able to get the data in different formats (NMEA, LLH,XYZ, etc.) and at different sampling frequencies up to 200 Hz. The data is stored in an optimized database called InfluxDB(https://www.influxdata.com) for real-time and IoT applications. It was developed to manage the data efficiently, allowing both real-time and post-processed visualization. The visualization is performed by means of web applications, such as Grafana (https://grafana.com) or Chronograf (https://www.influxdata.com/time-series-platform/chronograf). We will describe the technical aspects relating to the presented software and some preliminary results in test cases.3 12 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Contemporaneous Thick- and Thin-Skinned Seismotectonics in the External Zagros: The Case of the 2021 Fin Doublet, Iran
In this work, we propose a geodetic model for the seismic sequence, with doublet earthquakes, that occurred in Bandar Abbas, Iran, in November 2021. A dataset of Sentinel-1 images, processed using the InSAR (Interferometric Synthetic Aperture Radar) technique, was employed to identify the surface deformation caused by the major events of the sequence and to constrain their geometry and kinematics using seismological constraints. A Coulomb stress transfer analysis was also applied to investigate the sequence’s structural evolution in space and time. A linear inversion of the InSAR data provided a non-uniform distribution of slip over the fault planes. We also performed an accurate relocation of foreshocks and aftershocks recorded by locally established seismographs, thereby allowing us to determine the compressional tectonic stress regime affecting the crustal volume. Despite the very short time span of the sequence, our results clearly suggest that distinct blind structures that were previously unknown or only suspected were the causative faults. The first Mw 6.0 earthquake occurred on an NNE-dipping, intermediate-angle, reverse-oblique plane, while the Mw 6.4 earthquake occurred on almost horizontal or very low-angle (SSE-dipping) reverse segments with top-to-the-south kinematics. The former, which cut through and displaced the Pan-African pre-Palaeozoic basement, indicates a thick-skinned tectonic style, while the latter rupture(s), which occurred within the Palaeozoic–Cenozoic sedimentary succession and likely exploited the stratigraphic mechanical discontinuities, clearly depicts a thin-skinned style.143 122
