Skip to main content
The search returned 64 results
Now showing 1 - 10 of 64
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    INGV data lifecycle management system performances during Mw 6.0 2016 Amatrice Earthquake Sequence

    At 01:36:32 UTC on August 24, 2016 an earthquake of magnitude 6.0 occurred in Central Italy, affecting many small towns and municipalities in the Lazio, Umbria, Marche and Abruzzo regions. The event caused severe damages, many victims and 299 fatalities. Only 21 seconds after the beginning of the earthquake, the first automatic location of this earthquake was available and stored in our earthquakes database. The first magnitude estimate followed 68 seconds after the origin time. Few seconds later the INGV seismologists on duty in accordance to the agreed protocols provided the first alert to the Italian Civil Protection Department (Dipartimento di Protezione Civile, DPC) and thereby triggered the seismic emergency protocol. Subsequently, they elaborated the data in order to produce the first manually reviewed hypocenter, which was published on the Institute’s website at 01:53:18 UTC. The sequence following this mainshock generated thousands of earthquakes in the epicentral area, which the INGV automated localization system processed and detected along with the usual seismic activity in the rest of the Italian territory. In this paper we analyze the behavior of the automated system and of the data lifecycle management procedures in such extraordinary conditions. In particular we want to measure the capability of the system to manage the huge data flow, in terms of frequency and size of seismic events and its ability to remain fairly responsive and accurate in accomplishing its duty in the expected time. This will help us to identify potential problems and to suggest necessary improvements to better serve the INGV mission for Civil Protection.
      777  249
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Seismic measurements to reveal short-­term variations in the elastic properties of the Earth crust

    Since the late the late ’60s-early ’70s era seismologists started developed theories that included variations of the elastic property of the Earth crust and the state of stress and its evolution crust prior to the occurrence of a large earthquake. Among the others the theory of the dilatancy (Scholz et al., 1973): when a rock is subject to stress, the rock grains are shifted generating micro-cracks, thus the rock itself in- creases its volume. Inside the fractured rock, fluid saturation and pore pressure play an important role in earthquake nucleation, by modulating the effective stress. Thus measuring the variations of wave speed and of anisotropic parameter in time can be highly informative on how the stress leading to a major fault failure builds up. In 80s and 90s such kind of research on earthquake precursor slowed down and the priority was given to seismic hazard and ground motions studies, which are very important since these are the basis for the building codes in many countries. Today we have dense and sophisticated seismic networks to measure wave-fields characteristics: we archive continuous waveform data recorded at three components broad-band seismometers, we almost routinely obtain high resolution earthquake locations. Therefore we are ready to start to systematically look at seismic-wave propagation properties to possibly reveal short-term variations in the elastic properties of the Earth crust. In active fault areas and volcanoes, tectonic stress variation influences fracture field orientation and fluid migration processes, whose evolution with time can be monitored through the measurement of the anisotropic parameters (Piccinini et al., 2006) and of the relative velocity variations through the ambient seismic noise cross-correlation analysis (Campillo, 2006). Through the study of S waves anisotropy it is therefore potentially possible to measure the presence, migration and state of the fluid in the rock traveled by seismic waves, thus providing a valuable route to understanding the seismogenic phenomena and their precursors (Crampin & Gao, 2010). Variations of anisotropic parameter and of the ratio between the compressional (P-wave) and the shear (S-wave) seismic velocities, the Vp/Vs (Nur, 1972) have been recently observed and measured during the preparatory phase of a major earthquake (Lucente et al. 2010). The seismic noise cross-correlation analysis has shown remarkable results in studying strong earthquakes (Brenguier et al., 2008). The sudden decrease of relative velocity variations occurring at the same time of the mainshock has been interpreted as due to the modification of the coseismic stress field (Zaccarelli et al., 2011). This study has been developed by the Research Unit 2 inside the “INGV-DPC S3-Project 2012-2013: Short term earthquake prediction and preparation”. The RU 2 is composed by two Work Packages (WP1 and WP2), aimed to study the variations of seismic waves velocities using different techniques: the cross-correlation of seismic noise (WP1) in the area Po Plain before and after the 2012 Emilia seismic sequence, and as well as the seismic activity of the last few years in the Pollino region (southern Apennines) and the anisotropy of S waves (WP2) to all events recorded during the ongoing seismic sequence in the Pollino area and to compare their temporal trends to other seismic observable as the ratio Vp / Vs.
      229  213
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    The New ShakeMap in Italy: Progress and Advances in the Last 10 Yr

    This work describes a procedure to configure U.S. Geological Survey (USGS)-ShakeMap for a given region. The procedure is applied to Italy to update and improve the ShakeMap service provided by Istituto Nazionale di Geofisica e Vulcanologia (INGV). The new configuration features (1) the adoption of recently developed ground-motion models (GMMs) and of an updated map of VS30 for the local site effects and (2) the adoption of the newly developed USGS-ShakeMap version 4 (v.4) software (see Data and Resources). We have used the same subdivision in tectonic regimes adopted for the GMMs for the new Italian seismic hazard model (MPS19, Meletti et al., 2017) and selected the most appropriate GMMs after applica- tion of a ranking procedure consisting of statistical tests. A cross- validation technique has been applied to test the goodness of the selected configuration and to compare the ShakeMaps obtained with the old (Michelini et al., 2008) and the new settings. Finally, the INGV ShakeMap workflow has been renovated to exploit the data and analysis chain implemented at INGV from real-time data streams acquisition to analyst revised waveforms including additional data (e.g., revised location, fault geometry) that may become available days after the event occurrence.
      665  35
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Comparative Analysis of Methods to Estimate Geodetic Strain Rates from GNSS Data in Italy

    Our ability to estimate surface deformation rates in the Central Mediterranean has considerably enhanced in the last decade thanks to the growth of continuous Global Navigation Satellite System (GNSS) networks. Focusing on the Apennine/Alpine seismogenic belt, this area offers the opportunity to test the use of geodetic strain rates for constraining active tectonic processes and for seismic hazard assessments. Given the importance of geodetic strain rate models in modern hazard estimation approaches, however, one has to consider that different approaches can provide significantly different strain rate maps. Despite the increasing availability of GNSS velocity data, in fact, strain rate models can significantly differ, because of the spatial heterogeneity of GNSS station locations and inherent strategies in computing strain rates. Using a dense GNSS velocity dataset, this study examines three methods for estimating horizontal strain rates, described in the recent literature, and selected to represent approaches of increasing mathematical complexity. The advantages, drawbacks, and optimal settings of each method are discussed. The main result is an ensemble of strain rate models that enable the evaluation of epistemic uncertainties in seismicity rate models constrained by geodetic velocities.
      97  191
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Bayesian inference on earthquake size distribu- tion: a case study in Italy

    (2010-02) ; ; ;
    Faenza, L.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione CNT, Roma, Italia
    ;
    Meletti, C.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Milano-Pavia, Milano, Italia
    This paper is focused on the study of earthquake size statistical distribution by using Bayesian inference. The strategy consists in the definition of an a priori distribution based on instrumental seismicity, and modeled as a power law distribution. By using the observed historical data, the power law is then modified in order to obtain the posterior distribution. The aim of this paper is to define the earthquake size distribution using all the seismic database available (i.e., instrumental and historical catalogs) and a robust statistical technique. We apply this methodology to the Italian seismicity, dividing the territory in source zones as done for the seismic hazard assessment, taken here as a reference model. The results suggest that each area has its own peculiar trend: while the power law is able to capture the mean aspect of the earthquake size distribution, the posterior emphasizes different slopes in different areas. Our results are in general agreement with the ones used in the seismic hazard assessment in Italy. However, there are areas in which a flattening in the curve is shown, meaning a significant departure from the power law behavior and implying that there are some local aspects that a power law distribution is not able to capture.
      182  25
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Regression analysis of MCS intensity and ground motion spectral accelerations (SAs) in Italy

    (2011) ; ;
    Faenza, L.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione CNT, Roma, Italia
    ;
    Michelini, A.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione CNT, Roma, Italia
    ;
    We present the results of the regression analyses between Mercalli-Cancani-Sieberg (MCS) intensity and the spectral acceleration (SA) at 0.3, 1.0 and 2.0 s (SA03, SA10 and SA20). In Italy, the MCS scale is used to describe the level of ground shaking suffered by manufactures or perceived by the people, and it differs to some extent from the Mercalli Modified scale in use in other countries. We have assembled a new SA/MCS-intensity data set from the DBMI04 intensity database and the ITACA accelerometric data bank. The SA peak values are calculated in two ways-using the maximum among the two horizontal components, and using the geometrical mean among the two horizontal components. The regression analysis has been performed separately for the two kinds of data sets and for the three target periods. Since both peak ground parameters and intensities suffer of appreciable uncertainties, we have used the orthogonal distance regression technique. Also, tests designed to assess the robustness of the estimated coefficients have shown that single-line parametrizations for the regressions are sufficient to model the data within the model uncertainties. For the maximum horizontal component, SAxx(hm), the new relations are I(MCS) = (1.24 +/- 0.33) + (2.47 +/- 0.18) log SA0.3s(hm), sigma = 0.53, I(MCS) = (3.12 +/- 0.16) + (2.05 +/- 0.11) log SA1.0s(hm), sigma = 0.36, I(MCS) = (4.31 +/- 0.10) + (2.00 +/- 0.10) log SA2.0s(hm), sigma = 0.29. For the geometrical mean SA, SAxx(gm), the new relations are I(MCS) = (1.40 +/- 0.31) + (2.46 +/- 0.18) log SA0.3s(gm), sigma = 0.53, I(MCS) = (3.25 +/- 0.16) + (2.08 +/- 0.12) log SA1.0s(gm), sigma = 0.38, I(MCS) = (4.46 +/- 0.10) + (2.01 +/- 0.10) log SA2.0s(gm), sigma = 0.30. Adoption of the geometric mean of the horizontal components, rather than their maximum value, results in a minor shift towards larger values of intensity for the same level of ground motion; this difference, however, is contained within the regression standard errors of the former. Comparisons carried out in various manners for earthquakes where both kinds of data (macroseismic and instrumental data) are available have shown the general effectiveness of the relations.
      124  28
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    ProbShakemap: A Python toolbox propagating source uncertainty to ground motion prediction for urgent computing applications

    (2025-02) ;
    Selva, Jacopo
    ;
    Cordrie, Louise
    ;
    ;
    Seismic urgent computing enables early assessment of an earthquake’s impact by delivering rapid simulation-based ground-shaking forecasts. This information can be used by local authorities and disaster risk managers to inform decisions about rescue and mitigation activities in the affected areas. Uncertainty quantification for urgent computing applications stands as one of the most challenging tasks. Present-day practice accounts for the uncertainty stemming from Ground Motion Models (GMMs), but neglects the uncertainty originating from the source model, which, in the first minutes after an earthquake, is only known approximately. In principle, earthquake source uncertainty can be propagated to ground motion predictions with physics-based simulations of an ensemble of earthquake scenarios capturing source variability. However, full ensemble simulation is unfeasible under emergency conditions with strict time constraints. Here we present ProbShakemap, a Python toolbox that generates multi-scenario ensembles and delivers ensemble-based forecasts for urgent source uncertainty quantification. The toolbox implements GMMs to efficiently propagate source uncertainty from the ensemble of scenarios to ground motion predictions at a set of Points of Interest (POIs), while also accounting for model uncertainty (by accommodating multiple GMMs, if available) along with their intrinsic uncertainty. ProbShakemap incorporates functionalities from two open-source toolboxes routinely implemented in seismic hazard and risk analyses: the USGS ShakeMap software and the OpenQuake-engine. ShakeMap modules are implemented to automatically select the set and weights of GMMs available for the region struck by the earthquake, whereas the OpenQuake-engine libraries are used to compute ground shaking over a set of points by randomly sampling the available GMMs. ProbShakemap provides the user with a set of tools to explore, at each POI, the predictive distribution of ground motion values encompassing source uncertainty, model uncertainty and the inherent GMMs variability. Our proposed method is quantitatively tested against the 30 October 2016 Mw 6.5 Norcia, and the 6 February 2023 Mw 7.8 Pazarcik earthquakes. We also illustrate the differences between ProbShakemap and ShakeMap output.
      15  49
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Some insights into the time clustering of large earthquakes in Italy

    (2004-10) ; ; ; ;
    Faenza, L.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Bologna, Bologna, Italia
    The aim of this work is to investigate the clustering properties of the large earthquakes which occurred in Italy in the last four centuries.
      140  321
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The Proportional Hazard Model applied to the CSEP testing area in Italy

    (2010) ; ;
    Faenza, L.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione CNT, Roma, Italia
    ;
    Marzocchi, W.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Roma1, Roma, Italia
    ;
    This paper presents the strategies adopted to modify the Proportional Hazard Model (Faenza et al., 2003; Cinti et al., 2004) to fit the requirement for the forecast test within CSEP experiment. The model has been originally proposed to study the spatiotemporal distribution of the M 5.5+ seismicity in Italy, using two spatial models, a regular grid and a seismotectonic zonation. A prospective 10-years forecast test is already ongoing since 2005 and the results are available at the webpage (http://www.bo.ingv.it/ earthquake/ ITALY/forecasting/M5.5+/). In that test, we report the probability maps of M 5.5+ earthquake for the next 10 years for two spatial distributions. Since the original model is time-dependent, it is updated every year and immediately after the occurrence of a target event, e.g., Mw 5.5. Despite that prospective test is continuing and that the model updates probabilities different from CSEP experiments, we argue that a full evaluation of the model could be achieved only through the CSEP testing experiment, where the performances of different models are compared using the same rules and tests. The major modification we have introduced into our model is the simulation of the expected numbers of events in the exposure time ∆τ. This is performed considering the probability that an event occurs in ∆τ and evaluating the change this will cause into the expected numbers of events. This procedure is implemented for the first and the second generation of aftershocks.
      217  238
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The Italian Earthquakes and Tsunami Monitoring and Surveillance Systems

    The Osservatorio Nazionale Terremoti (ONT) is the Italian seismic operational centre for monitoring earthquake, it is part of Istituto Nazionale di Geofisica e Vulcanologia (INGV) the largest Italian research institution, with focus in Earth Sciences. INGV runs the Italian National Seismic Network (network code IV) and other networks at national scale for monitoring earthquakes and tsunami. INGV is a primary node of European Integrated Data Archive (EIDA) for archiving and distributing, continuous, quality checked seismic waveforms (strong motion and weak motion recordings). ONT designed the data acquisition system to accomplish, in near-real-time, automatic earthquake detection, hypocentre and magnitude determination and evaluation of moment tensors, shake maps and other products. Database archiving of all parametric results are closely linked to the existing procedures of the INGV seismic monitoring environment and surveillance procedures. ONT organize the Italian earthquake surveillance service and the tsunami alert service (INGV is Tsunami Service Provider of the ICG/NEAM for the entire Mediterranean basin). We provide information to the Dipartimento di Protezione Civile (DPC) and to several Mediterranean countries. Earthquakes information are revised routinely by the analysts of the Italian Seismic Bulletin. The results are published on the web and are available to the scientific community and the general public.
      249  124