Berrino, Giovanna
Preferred name
Berrino, Giovanna
Email
giovanna.berrino@ingv.it
Staff
staff
ORCID
Scopus Author ID
6603696556
Researcher ID
O-8281-2015
92 results
Filters
Settings
The search returned 92 results
Now showing 1 - 10 of 92
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The absolute gravity network of Italy in the framework of the ITGRS/ITGRF
(2024-09-04); ; ; ; The activities for establishing the Italian Reference Gravity Network started in 2022. This is in line with the actions promoted by the International Association of Geodesy that during its 2015 General Assembly approved a resolution on the establishment of the new global gravity network the so-called International Terrestrial Gravity Reference System/Frame that will replace IGSN71. An initial set of 30 stations has been defined over the peninsular part of Italy and the two main islands of Sicily and Sardinia. Particularly, the GGOS core station of Matera (the Agenzia Spaziale Italiana Center for Space Geodesy “Bepi” Colombo) is one of the network points as required in the documents of the GGOS-Bureau of Networks and Observations. Thus, this station will provide one link between the Italian national absolute gravity network and the GGOS observation system of IAG. In order to ensure the measurements traceability, as required by the international standards on gravity measurements, the absolute gravimeters used in the measurements participated in international comparison campaigns. Absolute gravity measurements have been supplemented with direct measurements of the local value of the vertical gravity gradient, in order to reduce the absolute values, measured by different instruments at different heights, to an intermediate and common reference height and to the ground reference level to transport it to an external associated station. The gravity field campaigns have been assisted by topographic survey campaigns, allowing a centimetric georeferencing of the gravity stations to the current ITRF. The collected data will be then validated and reduced following the internationally accepted standards and finally published through a dedicate web page of the project. These data will also be submitted to the absolute gravity database maintained by the Bureau Gravimétrique International/Bundesamt fuer Kartographie und Geodaesie where the absolute gravity data that will contribute to the new global absolute gravity reference system are collected.72 121 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Subsurface 3D modeling of Pantelleria island (Italy) using gravity data
Pantelleria is a 84 km2 extended volcanic island located in the Mediterranenan Sea between Sicily (Italy) and Tunisia. Previous studies described that in Pantelleria island both tectonic structures and the volcano-tectonic features had a common tectonic origin controlled by a NW-SE directed extension in accordance with the regional trend of the Sicily Channel arising interest for multiapproach investigations. Indeed, in the last decades this area has been field of widespread analysis useful for the investigation of the volcano-tectonic and tectonic activity, as well as for geodetic study and resources exploration. Our approach focused on the gravimetric analysis of Pantelleria island and in particular we provided a 3D inverted model of the area, starting from in-situ gravity measurements. The 250 m model resolution has been endorsed by the presence of a total of 290 measurement stations, distributed both onshore and offshore and acquired during some field surveys up to 2006; 236 of them were already published and inverted in past using 2.5D modelling. Input data consisted of a database containing Bouguer anomaly data reduced using a density of 2500 kg/m3 and referred to the Geodetic Reference System 1980 (GRS80) Ellipsoid. As a result, the 3D modelling allowed exploring density differences through the about 4 km depth, emphasizing interesting geological structures. Such results would help any drilling program in the island (e.g. for geothermal purposes), lead to more successful drilling programs, and serve as well-constrained geologic input to improve the accuracy of future numerical (e.g. reservoir) models.65 132 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , 59 187 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Absolute gravity and deformation measurements for a multi-disciplinary study in Central Italy
(2023-02-07); ; ; ; Since 2018, INGV funded 3 projects aimed to detect ground deformations and gravity variations over different timescale in the area where the recent seismic events of L’Aquila (2009, Mw 6.3) and Amatrice-Norcia (2016, Mw 6.1 and 6.5) took place. The consequent static deformation field reached several centimetres and the modelled impact of such events could have modified the gravity field up to 170 μGal. Furthermore, the medium-long-term gravity and ground deformation variations related to post-seismic relaxation are expected as consequence of vertical deformation of the Earth surface and/or of the internal boundaries separating layers at depth with different densities. In addition, the L’Aquila area is affected by deformations induced by ground water level changes in the aquifers. Therefore, a multidisciplinary approach carrying out joint measurements of deformation and gravity is fundamental to understand the role of each geophysical process. To this aim, a network of 3 (Terni, Popoli, Sant’Angelo Romano) new non-permanent GNSS stations was realized outside the buildings hosting the absolute gravity stations. At L’Aquila, a permanent GNSS station managed by the Italian Space Agency (AQUI) is continuously working on the rooftop terrace of the Science Faculty, and positioned vertically with respect to the gravimetric station (AQUIg), which is located 4 floors below. Since 4 absolute gravimetric sites are located indoor, the precise coordinates of the gravity benchmark have been obtained by classical topographic surveys, connecting the indoor site to the outdoor GNSS reference point. Here we present the gravity and ground deformation variations observed in the period 2018-2022 after five measurement campaigns.67 120 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The first absolute gravity and height reference network in Sicily
(2023-02-07); ; ; ; In this poster we present the realization and the surveys performed to establish a new reference gravity and elevation network in Sicily with the aim to provide new reference systems useful for all the scientific and technological activities related to the gravity field and to the proper definition of a modern height system in this region. This network belongs to the under construction new Italian Reference Gravity Network (G0) that is part of the INGV Project Pianeta Dinamico, Task S2, during the period 2019-2022. The Sicilian network encloses 5 stations (Catania, Centuripe, Milazzo, Noto, and Palermo), evenly distributed forming a large mesh network which roughly covers the entire Sicily (Fig.1). All absolute stations are hosted inside structures that guarantee protection for the instrumentation during the measurements and the necessary power supply. In addition to the absolute gravity value, at each station, the vertical gravity gradient and the gravity difference (Δg) between the indoor absolute gravity and an outdoor satellite station were also measured. Gravity measurements were carried out between the end of 2021 and the 2022 with the Microg LaCoste FG5#238 and the Scintrex CG-6 gravimeters for absolute and relative measurements, respectively. Gravity data have been corrected for known effects ensuring the reliability and accuracy at the µGal level. The coordinates and the orthometric heights were at the same time measured with mixed terrestrial and satellite local networks at each site. The precise coordinates obtained after the adjustments were useful to post-process the absolute gravity data and to refer all the gravity measurements presented in this work to the equipotential surface of the gravity field. Since three of the five selected stations were measured in the past, it was also possible to evaluate the long-term stability of the gravity values at these stations.108 233 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , GNSS and absolute gravity measurements for a multi-disciplinary study of natural risks in Central Italy
(2022-09-19); ; ; ; Crustal deformations are widely studied in Italy by analyzing data from GNSS permanent networks. However, deformations can be generated by very different geophysical processes related to tectonics but also to fluid circulation and density variations. Therefore, it is very important to understand if the detected deformations are connected to gravity variations (Greco et al., 2021a). Since 2018, INGV funded 3 projects aimed to detect ground deformations and gravity variations over different timescale in the area where the recent seismic events of L’Aquila (2009, Mw 6.3) and Amatrice-Norcia (2016, Mw 6.1 and 6.5) took place. The consequent static deformation field reached several centimetres and the modelled impact of such events could have modified the gravity field up to 170 μGal (Riguzzi et al., 2019). Furthermore, the medium-long-term gravity and ground deformation variations related to post-seismic relaxation are expected as consequence of vertical deformation of the Earth surface and/or of the internal boundaries separating layers at depth with different densities. In addition, the L’Aquila area is affected by deformations induced by ground water level changes in the aquifers (Devoti et al., 2018). Therefore, a multidisciplinary approach carrying out joint measurements of deformation and gravity is fundamental to understand the role of each geophysical process. To this aim, a network of 3 (Terni, Popoli, Sant’Angelo Romano) new non-permanent GNSS stations was realized outside the buildings hosting the absolute gravity stations (Greco et al., 2021b). At L’Aquila, a permanent GNSS station managed by the Italian Space Agency (AQUI) is continuously working on the rooftop terrace of the Science Faculty, and positioned vertically with respect to the gravimetric station (AQUIg), which is located 4 floors below (Fortunato et al., 2020). Since 4 absolute gravimetric sites are located indoor, the precise coordinates of the gravity benchmark have been obtained by classical topographic surveys, connecting the indoor site to the outdoor GNSS reference point. In the poster we describe the procedure and results followed to achieve the coordinates of both the GNSS and the absolute gravimetric sites. Furthermore, we also present the results over the short and the medium-long-term obtained by repetitive combined GNSS and integrated absolute and relative gravity measurements.65 106 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Structural setting of the Ischia resurgent caldera (Southern Tyrrhenian Sea, Italy) by integrated 3D gravity inversion and geological models
(Geological Society, London, 2022); ; ; ; The structural setting of the Ischia resurgent caldera and its magmatic system has been investigated by a joined interpretation of a 3D inversion of previously collected gravimetric data and all the available geological, geophysical and petrological data. Starting from the available Bouguer gravity map of the Neapolitan volcanic area and a previous 2.5D modelling, a selection of on-land and off-shore gravity data has been used to perform a 3D inversion, adapting and merging the basic ideas of two already tested methods, used to detect isolated bodies and layered discontinuities respectively. The base of the map is a set of gravity values, covering the whole Neapolitan volcanic area and the Gulf of Naples, which results from the union of 862 offshore and about 2000 on land already existing gravity data, uniformed and re-analyzed. The final model proposed here allow to outline a very detailed and well constrained structural setting of the crustal sector beneath Ischia. In particular, the 3D gravity inversion allowed to outline a body with negative density contrast under the Mt. Epomeo, interpreted as the resurgent block, and to describe the magmatic system underneath it as a complex system of intrusions, rather than an uniformly distributed laccolithic body.42 112 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Interpretation of spatiotemporal gravity changes accompanying the earthquake of 21 August 2017 on Ischia (Italy).
(2021-12-22); ; ; ; We analyse spatiotemporal gravity changes observed on the Ischia island (Italy) accompanying the destructive earthquake of 21 August 2017. The 29 May 2016 to 22 September 2017 time-lapse gravity changes observed at 18 benchmarks of the Ischia gravimetric network are rst corrected for the gravitational e ect of the surface deforma- tion using the deformation-induced topographic e ect (DITE) correction. The co-seismic DITE is computed by Newtonian volumetric integration using the Toposk software, a high-resolution LiDAR DEM and the co-seismic vertical displacement eld derived from Sentinel-1 InSAR data. We compare numerically the DITE eld with its commonly used Bouguer approximation over the island of Ischia with the outcome that the Bouguer ap- proximation of DITE is adequate and accurate in this case. The residual gravity changes are then computed at gravity benchmarks by correcting the observed gravity changes for the planar Bouguer e ect of the elevation changes at benchmarks over the same pe- riod. The residual gravity changes are then inverted using an inversion approach based on model exploration and growing source bodies, making use of the Growth-dg inversion tool. The found inversion model, given as subsurface time-lapse density changes, is then interpreted as mainly due to a co-seismic or post-seismic disturbance of the hydrothermal system of the island. Pros and weak points of such interpretation are discussed.455 218 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Insights into Seismogenetic Areas in Central Italy from Combined Absolute Gravity and GNSS Measurements
In this study we present and discuss gravity and ground deformation variations, at different time scales, observed in a wide mesh absolute gravity and GNSS network set up in central Italy. The network was installed in the area affected by the 2009 (L’Aquila; Mw 6.1) and 2016 (Amatrice-Norcia; Mw 6.0 and 6.5) seismic activity, in order to verify if gravity and ground deformation variations could be related to seismic effects. The new network includes 5 stations distributed between the Lazio, Umbria, and Abruzzo regions. From 2018 to 2020 three campaigns were carried out using the transportable Micro-g LaCoste FG5#238 and the portable Micro-g LaCoste A10#39 absolute gravimeters and completed with two simultaneous GNSS measurements. Topographic instruments, measurement and analysis techniques enabling accurate measurements in the positioning of the stations and to control their variations over time were applied. The high reliability and accuracy of the absolute gravity data gathered, after being corrected for known effects, showed a negative short-term (2018–2020) pattern throughout the area, up to +30 microGal. Since some stations of the new network coincided with benchmarks already measured in the past, an analysis of long-term gravity changes was carried out and a fair degree of stability was observed in two stations, while positive large variations, of approximately 70 and 157 microGal, were recorded in the other two stations in the time intervals 1954–2020 and 2005–2010, respectively. On the other hand, variations highlighted by GNSS height measurements were all below 3 cm. Here, the first long-lasting gravity measurements carried out with absolute gravimeters in a seismic area in Italy are presented, providing meaningful geophysical information. The obtained results, in terms of availability of a combined absolute gravity and GNSS network, definition of data acquisition and analysis procedures, as well as creation of a high quality data archive, lay the foundations for a multidisciplinary approach towards improving the knowledge of this seismogenetic area of Italy.338 97 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Il Monitoraggio dei Vulcani Campani - Secondo semestre 2019
L'Istituto Nazionale di Geofisica e Vulcanologia (INGV) è componente del Servizio Nazionale di Protezione Civile, ex articolo 6 della legge 24 febbraio 1992 n. 225 ed è Centro di Competenza per i fenomeni sismici, vulcanici e i maremoti per il Dipartimento della Protezione Civile Nazionale (DPC). L’Osservatorio Vesuviano, Sezione di Napoli dell’INGV, ha nei suoi compiti il monitoraggio e la sorveglianza H24/7 delle aree vulcaniche attive campane (Vesuvio, Campi Flegrei e Ischia). Tali attività sono disciplinate dall’Accordo-Quadro (AQ) sottoscritto tra il DPC e l’INGV per il decennio 2012-2021 e sono dettagliate negli Allegati A e B del suddetto AQ. Il presente Rapporto sul Monitoraggio dei Vulcani Campani rappresenta l’attività svolta dall’Osservatorio Vesuviano e dalle altre Sezioni INGV impegnate nel monitoraggio dell’area vulcanica campana nel secondo semestre 2019.574 459
