A New Dynamic Cone Penetration Test–Based Procedure for Liquefaction Triggering Assessment of Gravelly Soils
Language
English
Obiettivo Specifico
5T. Sismologia, geofisica e geologia per l'ingegneria sismica
Status
Published
JCR Journal
JCR Journal
Issue/vol(year)
12/147 (2021)
Publisher
American Society of Civil Engineers
Pages (printed)
04021141
Date Issued
2021
Abstract
Developing a reliable, cost-effective liquefaction triggering procedure for characterizing the liquefaction potential of gravelly soils
based on in situ penetration testing has always been a great challenge for geotechnical engineers and researchers. Typical correlations based
on the standard penetration test (SPT) and the cone penetration test (CPT) are affected by large-size gravel particles, which can lead to
erroneous results. The Becker Penetration Test, well known for gravelly soil characterization, is cost-prohibitive for routine projects
and is not available in most of the world. With a cone diameter of 74 mm the Chinese dynamic cone penetration test (DPT) is superior
to smaller penetrometers and can be economically performed with conventional drilling equipment. DPT has previously been directly correlated
to field performance data, and probabilistic liquefaction resistance curves were developed based on one earthquake and geologic environment
in China; however, the use of these data in other tectonic and geologic environments was not validated. In this study, 137 data points
from 10 different earthquakes and different depositional environments in seven countries have been used to develop probabilistic liquefaction
resistance curves. The data set was expanded by performing DPT soundings at sites around the world where gravelly soil did or did not
liquefy in past earthquakes. Based on the expanded DPT database, a new set of magnitude-dependent probabilistic triggering curves has been
developed using logistic regression analysis. The new triggering curves are better constrained by data and the spread between the 85%
and 15% probability curves is reduced. Liquefaction resistance is shifted upward at lower DPT values. A new magnitude scaling factor
(MSF) curve has also been developed specifically for gravel liquefaction which was found to be consistent with previous curves for sand.
based on in situ penetration testing has always been a great challenge for geotechnical engineers and researchers. Typical correlations based
on the standard penetration test (SPT) and the cone penetration test (CPT) are affected by large-size gravel particles, which can lead to
erroneous results. The Becker Penetration Test, well known for gravelly soil characterization, is cost-prohibitive for routine projects
and is not available in most of the world. With a cone diameter of 74 mm the Chinese dynamic cone penetration test (DPT) is superior
to smaller penetrometers and can be economically performed with conventional drilling equipment. DPT has previously been directly correlated
to field performance data, and probabilistic liquefaction resistance curves were developed based on one earthquake and geologic environment
in China; however, the use of these data in other tectonic and geologic environments was not validated. In this study, 137 data points
from 10 different earthquakes and different depositional environments in seven countries have been used to develop probabilistic liquefaction
resistance curves. The data set was expanded by performing DPT soundings at sites around the world where gravelly soil did or did not
liquefy in past earthquakes. Based on the expanded DPT database, a new set of magnitude-dependent probabilistic triggering curves has been
developed using logistic regression analysis. The new triggering curves are better constrained by data and the spread between the 85%
and 15% probability curves is reduced. Liquefaction resistance is shifted upward at lower DPT values. A new magnitude scaling factor
(MSF) curve has also been developed specifically for gravel liquefaction which was found to be consistent with previous curves for sand.
Type
article
File(s)![]()
Name
Rollins et al 2021 DPT.pdf
Description
Restricted Paper
Size
1.91 MB
Format
Adobe PDF
Checksum (MD5)
The MD5 message-digest algorithm can be used to verify the integrity of the file that you have uploaded. You can calculate its value locally via tools that are generally available in each operative system like md5sum
b7f07897a2f2ec0a945d78ec48809b33
