Brugnone, Filippo
Preferred name
Brugnone, Filippo
ORCID
The search returned 11 results
Now showing 1 - 10 of 11
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Methodological insights for accurate quantification of trace elements in soluble and insoluble fractions of bulk atmospheric deposition
(Elsevier B.V. [s.l]: Turkish National Committee for Air Pollution Research and Control (TUNCAP). Istanbul: HAVA KİRLENMESİ ARAŞTIRMALARI VE DENETİMİ TÜRK MİLLİ KOMİTESİ, 2025-08-07); ; ; ; This study explores the distribution of 16 trace elements between soluble and insoluble fractions of atmospheric deposition in Sicily, Italy, based on EU protocols for monitoring pollutants. Using a standardised deposimeter, we collected 149 atmospheric deposition samples over two years. Additionally, we analysed the rinse solution of the deposimeter separately. Higher deposition values for elements like Sr, B, Ba, Zn, As, and Cu were found in the soluble fraction, whereas Fe, Ti, Al, Cr, Co, Li, Mn, V, Ni, and Pb were prevalent in the insoluble fraction. The rinse fraction typically accounted for lower deposition values (from 1 % to 19 %), except for Pb and B, which accounted for 42 % and 31 % of the total deposition. We compared trace element distribution during a "dry period" and a "wet period." During the dry period, the insoluble fraction represented up to 97 % for elements like Ti and Fe, while the rinse fraction was notable for B (~51 %) and Pb (~33 %). In the wet period, insoluble contributions were higher for Li, Al, Ti, Cr, Fe, Co, and Pb, and soluble contributions increased for B, V, Mn, Zn, As, Sr, Ba, and Cu. While soluble elements were affected by temporal precipitation distribution, less soluble elements like Ti, Fe, and Al showed no significant differences between periods. Overall, the study highlights varying degrees of solubility among trace elements. Although the rinse fraction was generally negligible for most elements, overlooking it could lead to underestimating total atmospheric deposition for some elements, especially after extended dry periods.9 27 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Source apportionment of major ions and trace elements in the atmospheric deposition of Palermo (Sicily, Italy)
(Elsevier B.V. [s.l]: Turkish National Committee for Air Pollution Research and Control (TUNCAP). Istanbul: HAVA KİRLENMESİ ARAŞTIRMALARI VE DENETİMİ TÜRK MİLLİ KOMİTESİ, 2025-01-23); ; ; ; In Palermo, (Sicily, Italy), a year-long study was conducted to analyse the chemical composition of atmospheric deposition samples. The research was carried out at four urban sites and one semi-rural site. The atmospheric deposition samples were analysed both for major ions and trace elements. Abundances of major ions, on meq L − 1 basis, followed the sequence Cl − > HCO 3 − > NO 3 − > SO 4 2− > F − > Br − for anions, and Na + > Ca 2+ > NH 4 + > Mg 2+ > K + for cations. The statistical technique of Confirmatory Factor Analysis (CFA) was used to identify the main sources of origin of some of the main species and trace elements studied. Ions such as Cl − , Na + , Br and I were attributed to the marine source, whilst NH 4 + and NO 3 − to the anthropogenic source, as well as Mo, Cd, Cu, As, Pb, Sb and V among the trace elements. On the other hand, Ca 2+ , K + , Li, Fe, Al, and Sr were mainly of crustal origin. The seawater fractions of Mg 2+ and SO 4 2− were of marine origin, whereas the non-seawater fractions of the same ions were of crustal and anthropogenic origin, respectively. Anthropogenic sources, such as internal-combustion vehicle, domestic heating, and plant emissions, must be considered for Cu, Cr, Ba, Mo, Sb, Zn, As, Ni, and V. This study produced a previously unpublished dataset on the chemical composition of atmospheric deposition that made it possible to identify the main sources influencing air quality in the metropolitan area of Palermo (Italy).6 52 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Use of Low-Cost Sensors to Study Atmospheric Particulate Matter Concentrations: Limitations and Benefits Discussed through the Analysis of Three Case Studies in Palermo, Sicily
The paper discusses the results of the concentrations of atmospheric particulate matter, in the PM2.5 and PM10 fractions, acquired by two low-cost sensors. The research was carried out from 1 July 2023 to 30 June 2024, in Palermo, Sicily. The results obtained from two systems equipped with the same sensor model were compared. Excellent linear correlation was observed between the results, with differences in measurements falling within instrumental accuracy. Two instruments equipped with different sensors, models Novasense SDS011 and Plantower PMSA003, were placed at the same site. These were complemented by a weather station to measure meteorological parameters. Upon comparing the atmospheric particulate matter concentrations measured by the two instruments, it was observed that there was a good linear correlation for PM2.5 and a poor linear correlation for PM10. Additionally, the PMSA003 sensor appeared to consistently record higher concentrations than the SDS011 sensor. During periods influenced by natural sources and/or anthropogenic activities at the regional and/or local scale, i.e., the dispersal of Saharan sands, forest fires, and local events using fireworks, abnormal concentrations of atmospheric particulate matter were detected. Despite the inherent limitations in precision and accuracy, both low-cost instruments were able to identify periods with abnormal concentrations of atmospheric particulate matter, regardless of their source or type.14 26 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Hydrogeochemistry of trace and rare earth elements in the Caviahue-Copahue Volcanic Complex
The Caviahue-Copahue Volcanic Complex is one of the most studied active volcanic systems in the South American Andean range, and yet little research has focused on trace and rare-earth elements of waters, especially during an eruptive cycle. In this study, we sampled and investigated natural waters from 23 sites (involving the crater lake, hot springs, streams, rivers, and bubbling pools) in two campaigns in 2017 and 2018, using physi cochemical parameters, major, trace and rare-earth elements concentrations. With this novel dataset, it was possible to identify, characterize and compare three groups of waters with distinctive hydrofacies. Indeed, the normalization of water compositions against host rock concentrations showed a particular trace element pattern for each group of waters. Although the absolute concentrations of the elements in each sampling site changed from 2017 to 2018, the normalized patterns did not. Boron, As, Cd, Tl, Se, and Te, commonly recognized as volatile, are the main trace elements that magmatic gases supply to the system headwaters, whereas elements such as Ca, K, and Ba are affected by precipitation of secondary minerals (gypsum, anhydrite, barite, jarosite, and alunite). Furthermore, the main river draining the summit volcano shows a steep decrease in As, Cr, and V concentrations correlated to the precipitation of Fe and Al hydroxysulfates (schwertmannite and basaluminite, respectively). Moreover, it is the first time that a comparison between the different water groups is made using the patterns of the rare-earth elements, allowing us to identify and separate depletion patterns due to dilution processes from those due to precipitation processes.63 64 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Hellenic karst waters: geogenic and anthropogenic processes affecting their geochemistry and quality
Karst hydrosystems represent one of the largest global drinking water resources, but they are extremely vulnerable to pollution. Climate change, high population density, intensive industrial, and agricultural activities are the principal causes of deterioration, both in terms of quality and quantity, of these resources. Samples from 172 natural karst springs were collected in the whole territory of Greece. To identify any geogenic contamination and/or anthropogenic pollution, analyses of their chemical compositions, in terms of major ions and trace elements, were performed and compared to the EU limits for drinking water. Based on chloride content, the collected karst springs were divided into two groups: low-chloride (< 100 mg L-1) and high-chloride content (> 100 mg L-1). An additional group of springs with calcium-sulfate composition was recognised. Nitrate concentrations were always below the EU limit (50 mg L-1), although some springs presented elevated concentrations. High contents in terms of trace elements, such as B, Sr, As, and Pb, sometimes exceeding the limits, were rarely found. The Greek karst waters can still be considered a good quality resource both for human consumption and for agriculture. The main issues derive from seawater intrusion in the aquifers along the coasts. Moreover, the main anthropogenic pollutant is nitrate, found in higher concentrations mostly in the same coastal areas where human activities are concentrated. Finally, high levels of potentially harmful trace elements (e.g. As, Se) are very limited and of natural origin (geothermal activity, ore deposits, etc.).240 51 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Characterization of trace elements in thermal and mineral waters of Greece
Natural thermal and mineral waters are widely distributed along the Hellenic region and are related to the geodynamic regime of the country. The diverse lithological and tectonic settings they are found in reflect the great variability in their chemical and isotopic composition. The current study presents 276 (published and unpublished) trace element water data and discusses the sources and processes affecting the water by taking into consideration the framework of their geographic distribution. The dataset is divided in groups using temperature- and pH-related criteria. Results yield a wide range of concentrations, often related to the solubility properties of the individual elements and the factors impacting them (i.e. temperature, acidity, redox conditions and salinity). Many elements (e.g. alkalis, Ti, Sr, As and Tl) present a good correlation with temperature, which is in cases impacted by water rock interactions, while others (e.g. Be, Al, Cu, Se, Cd) exhibit either no relation or an inverse correlation with T possibly because they become oversaturated at higher temperatures in solid phases. A moderately constant inverse correlation is noticed for the vast majority of trace elements and pH, whereas no relationship between trace element concentrations and Eh was found. Seawater contamination and water-rock interaction seem to be the main natural processes that influence both salinity and elemental content. All in all, Greek thermomineral waters exceed occasionally the accepted limits representing in such cases serious harm to the environment and probably indirectly (through the water cycle) to human health.257 38 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Atmospheric Deposition around the Industrial Areas of Milazzo and Priolo Gargallo (Sicily-Italy)-Part A: Major Ions
The chemical composition of rainwater was studied in two highly-industrialised areas in Sicily (southern Italy), between June 2018 and July 2019. The study areas were characterised by large oil refining plants and other industrial hubs whose processes contribute to the release of large amounts of gaseous species that can affect the chemical composition of atmospheric deposition As in most of the Mediterranean area, rainwater acidity (ranging in the study area between 3.9 and 8.3) was buffered by the dissolution of abundant geogenic carbonate aerosol. In particular, calcium and magnesium cations showed the highest pH-neutralizing factor, with ~92% of the acidity brought by SO42- and NO3- neutralized by alkaline dust. The lowest pH values were observed in samples collected after abundant rain periods, characterised by a less significant dry deposition of alkaline materials. Electrical Conductivity (ranging between 7 µS cm-1 and 396 µS cm-1) was inversely correlated with the amount of rainfall measured in the two areas. Concentrations of major ionic species followed the sequence Cl- > Na+ > SO42- ≃ HCO3- > ≃ Ca2+ > NO3- > Mg2+ > K+ > F-. High loads of Na+ and Cl- (with a calculated R2 = 0.99) reflected proximity to the sea. Calcium, potassium, and non-sea-salt magnesium had a prevalent crustal origin. Non-sea salt sulphate, nitrate, and fluoride can be attributed mainly to anthropogenic sources. Mt. Etna, during eruptive periods, may be also considered, on a regional scale, a significant source for fluoride, non-sea salt sulphate, and even chloride.250 39 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Atmospheric Deposition around the Industrial Areas of Milazzo and Priolo Gargallo (Sicily–Italy)—Part B: Trace Elements
The concentrations of trace elements in atmospheric bulk depositions (wet plus dry) were investigated from two highly industrialised areas of Sicily (southern Italy) from June 2018 to July 2019, in order to recognise the main natural and anthropogenic sources. A side objective of this study was to improve the common sampling procedures and analytical methods used for monitoring trace elements in atmospheric deposition. The trace element VWM (Volume-Weighted Mean) concentrations ranged from less than 0.01 µg L-1 for trace elements such as Cs, Tl, and U, up to 24 µg L-1 for minor elements (Al, Zn, Sr), in the filtered aliquot, while they reached concentrations up to 144 µg L-1 for the same elements, in the unfiltered aliquot. Therefore, significant differences in concentrations between these two aliquots were found, particularly for Al, Fe, Ti, Zn, Cr, Pb, Se, Cs, and U. This implies that filtering operations may produce a consistent underestimation of concentrations of certain ‘constituents’ of the atmospheric deposition. Natural (marine spray, local and regional geogenic input, volcanic emanations) and anthropogenic sources (industrial emissions, auto vehicular traffic, and diffuse background pollution) which influence rainwater chemistry were identified. Enrichment factors (EFs), with respect to the upper crust composition, provided clear evidence of the different sources above mentioned: Ti, Fe, Al, Cs, Cr, Rb, and Co have low EFs (<1), and are referable to the (local and/or regional) geogenic input, while Se, Sb, Zn, B, Cd, Cu, Mo, Sr, As, with high EFs (>10), highlight the influence of marine and/or industrial sources. The study produced a novel dataset on the atmospheric deposition rate of several trace elements, which had never been studied in the investigated areas. Finally, a comparison of trace element deposition rates in the studied areas with the atmospheric deposition reported for 53 different sites, belonging to 20 different European nations, was made. The comparison showed that some elements, such as Al, V, Zn, and Mo had higher median deposition fluxes in the Sicilian sites than in European monitoring sites.168 122 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Geochemical characterisation of the thermo-mineral waters of Greece
Geothermal areas of Greece are located in regions affected by recent volcanism and in continental basins characterised by elevated heat flow. Many of them are found along the coast and thus, water is often saline due to marine intrusion. In the current study, we present about 300 unpublished and literature data from thermal and cold mineral waters collected along Greece. Samples were analysed for major ions, Li, SiO2 and isotopes in water. Measured temperatures range from 6.5 to 98°C, pH from 1.96 to 11.98, whilst Total Dissolved Solutes (TDS) from 0.22 to 51 g/L. Waters were subdivided into four main groups: i) thermal; ii) cold; iii) acidic (pH <5) and iv) hyperalkaline (pH >11). On statistical basis, the thermal waters were subdivided into subgroups according to both their temperature [warm (<29 °C), hypothermal (29-48 °C), thermal (48-75 °C) and hyperthermal (>75 °C)] and TDS [low salinity (<4 g/L), brackish (4-30 g/L) and saline (>30 g/L)]. Cold waters were subdivided basing on their pCO2 [low (<0.05 atm), medium (0.05-0.85 atm) and high (>0.85 atm)]. δ18O-H2O ranges from -12.7 to +2.7 ‰ vs. SMOW, while δ2H-H2O from -91 to +12 ‰ vs. SMOW being generally comprised between the Global Meteoric Water Line and the East Mediterranean Meteoric Water Line. Positive δ18O shifts with respect to the former are mostly related to mixing with seawater, while only for a few samples they point to high-temperature water-rock interaction processes. Only a few thermal waters gave reliable geothermometric estimates, suggesting reservoir temperatures between 80 and 260 °C.181 154 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , A Christmas gift: Signature of the 24th December 2018 eruption of Mt. Etna on the chemical composition of bulk deposition in eastern Sicily
The eruption of Mt. Etna which occurred on December 24th 2018 was characterized by strombolian activity and fire fountains, emitted by the New South-East Crater and along a fissure that propagated towards the SE. The influence of volcanic emissions on atmospheric deposition was clearly detectable at several kilometres from the source. Wet and dry (bulk) deposition samples were collected each month, through a network of eleven collectors, in the areas of Milazzo, and Priolo between June 2018 and June 2019. They were analysed for major ions and trace elements concentrations. The pH values range from 3.9 to 8.3, while the EC values range from 7 to 396 μS cm-1. An extensive neutralization of the acidity has been recognised mainly due to the suspended alkaline dust particles, which have a buffering role in rainwater. A high load of Na+ and Cl- was observed at all sites, related to the closeness of the study areas to the coast, showing a high positive correlation (R2 = 0.989) along the line of Na+/Cl- ratio in seawater. During the eruption, the volcanic plume was carried by the winds for long distance (more than 300 km) affecting the area of Priolo but not that of Milazzo, which was upwind with respect to Mt. Etna. The impact of volcanic HF was clearly recognised in the samples collected after the eruption. Volcanic SO2 and HCl had a lower impact due to the overwhelming input of anthropogenic sulfate and marine chloride. On the contrary, the signature of the Mt. Etna eruption can be well recognised in the high concentrations of certain trace elements in the samples collected immediately after the eruption. The strongest contrast between affected and non-affected samples was recognised in Al, Cd, and especially in the volatile elements Tl and Te, which are typically enriched in volcanic emissions. The results showed that volcanic eruptions might have a relevant effect on the atmospheric chemistry and on the composition of rainwater up to distances of 80 km from the emission vents.585 7
