Marcianò, Giuseppe
The search returned 7 results
Now showing 1 - 7 of 7
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , LEAD STANNATE AS COMPONENT OF ANTIQUE YELLOW GLASSY TESSERAE FROM SICILIAN MOSAICS
New investigations carried out on lead stannate (Pb2SnO4) and lead antimonate (Pb2Sb2O7) in yellow mosaic glassy tesserae from archaeological sites of Sicily (Taormina; Lipari, Tusa and Piazza Armerina), dated early than the 4th century AD, allow to confirm the presence of lead stannate in ancient glass dated before the 4th century. The two compounds have been used either as glass opacifiers and colorants. The different refractive index between fine crystals of these compounds and the amorphous glassy matrix, in which they are immerged, prevent the complete light transmittance, giving the typical opaque appearance to the glass. While lead antimonate was used to produce opaque yellow glass from the beginning of glass production up to the Roman period, it was replaced by lead stannate from about the 4th century AD up to the end of the Roman period. Although until today only Lahil et al. (2011) reported the presence of lead stannate in the glass tesserae dated before the 4th century AD, our new results confirm its presence in the investigated yellow tesserae from several mosaics of Sicily dated early than the 4th century AD61 159 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Geochemistry and tectonic setting of the Upper Cretaceous volcanics from Capo San Vito Peninsula (Western Sicily, Italy)
Petrological and geochemical data of the Upper Cretaceous volcanic rocks from Western Sicily are here reported with the aim to provide new information about the African paleomargin magmatic activity before the onset of the Alpine Orogeny. The studied alkaline basalts and basanites/nephelinites crop out as pillow breccias interbedded within the carbonate platform sequence of the Capo San Vito Peninsula. Abundances and ratios of incompatible elements resemble OIB-type volcanics from intraplate environment. They were generated from a low partial melting degree of a mantle source located in the transition zone between garnet- and spinel-lherzolite fields. Comparison with literature data of the coeval Hyblean volcanics show similar geochemical features of a plausible common source for the anorogenic magmas involved in their genesis. The Cretaceous magmatism of the S. Vito Lo Capo Peninsula is the result of magmatic intrusions in response to the extensional tectonic regime of the African plate northern edge.88 98 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Contribution of soil compositions, harvested times and varieties on chemical fingerprint of Italian and Turkish citrus cultivars
This paper aims to define the stability over the time of chemical elemental patterns in some citrus varieties of PGI (Protected Geographical Indication) and not PGI Interdonato and Lunario cultivars coming from Italy and Turkey and to set up a range of markers useful to trace their geographical origin. During the 2015–2017 growing seasons, all fruits were collected and subjected to Inductively Coupled Mass spectrom etry (ICP-MS) analysis, in order to determine the multielemental chemical profiles. The chemical variabil ity was calculated for each element by Multi-way analysis of variance. The results highlighted how the measured Cr, Ni, Al, K, Fe and Zn levels mainly depend on the soil composition and the fingerprint allow to trace the geographical origins. Moreover, the stepwise linear discriminant analysis (SLDA) has allowed to correctly classify the 100% of lemon pulps provenances, based on Ni, Al, K, Ca and Na con tents. Finally, our study demonstrates the role played by harvest years, variety and soils composition whose interaction contributed to define the chemical fingerprints.75 4 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , A FLIPPED CLASSROOM EXPERIENCE: TOWARDS THE KNOWLEDGE OF NEW ECOFRIENDLY MATERIALS NAMED "GEOPOLYMERS"
Technological advances have impacted almost every facet of modern culture and even in the educational methodologies. As new technologies become available, they are often embraced in educational innovation in an attempt to enhance traditional instruction. To this purpose, the “flipped classroom” is a learning model in which content attainment is shifted forward to outside of class, then followed by teacher-facilitated concept application activities in class. The constructivist approach, realized through an active-learning style of teaching, is more important respect to the order with which the teacher participated in the learning process. In this respect, the goal is to provide an alternative teaching approach on environmental issue. In particular, thanks to active learning (flipped classroom) it is possible to know and to appreciate a new eco-friendly material named to “Geopolymers”. One of the most important environmental advantage that can be attributed to this material is represented by the lower energy requirements for its production. Thus, this material could represent a potential tool able to mitigate the environmental pollution. In this regard, the geopolymers could provide a possible solution to wastes reuse as a resource to scale down the demand for extraction of new resources. This paper looks at some positive aspects of technology and waste treatment, and deals with the production of innovative building materials obtained by waste recycling known as geopolymers. Specifically, it is important to highlight the possibility of using wastes characterized by high silica and aluminum amounts as raw materials, particularly suitable to produce geopolymers by chemical activation with alkali. This is a useful method to improve hazardous-waste management and to reduce health and environmental issues due to the strong capability of make inert hazardous waste. This solution confirms the importance of re-manufacturing, reusing and recycling and, moreover, making a waste a new raw material and helps to move toward a more circular economy where wastes become negligible and further natural resources are used in an efficient and sustainable way. The proposed topic is addressed to students and aims to arouse their interest in the fields of the environmental protection and waste management, but overall it gives the perspective of natural resource preservation, and a most efficient way of their use without depleting the planet’s resources.41 92 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , ARCHAEOMETRIC STUDY OF THE HELLENISTIC METALLURGY IN SICILY: MINERALOGICAL AND CHEMICAL CHARACTERIZATION OF IRON SLAGS FROM PUNIC PANORMOS (PALERMO, ITALY)
Archaeological excavations carried out in the town of Palermo revealed important traces of metallurgical activity related to the Punic Panormos. Five samples of iron slags, recovered during the digging, were characterized by micro-structural, mineralogical and chemical investigations as well as by environmental scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray powder diffraction and X-ray fluorescence. The studied remains are spongy, rust colored, with a plano-convex shape and their textural and mineralogical features suggest they are metallurgical slags produced during smithing process. Wüstite, magnetite, fayalite, kirschsteinite, hedembergite, cristobalite and quartz are the main identified mineral phases, while goethite, lepidocrocite and calcite occur as minor secondary phases. The iron slags show heterogeneous structures such as hammering clues, layering in wustite crystals and presence of calcium-rich minerals which are consistent with a broad variation of the forging temperature due to the use of different smithing techniques. This assumption is confirmed by the different crystallization temperatures of the detected mineral phases. Skeletal and dendritic shapes are indicative of rapid cooling and, possibly, quenching. The chemical composition is dominated by iron, silicon and calcium and it is almost constant for all the samples suggesting that they were produced with similar raw materials and technology. The high Ca content suggests the use of carbonate-bearing rocks, widely outcropping over the Palermo territory, probably exploited as fluxing ores for the metallurgical process. The multidisciplinary approach adopted in this study provided new data for a better understanding of the metallurgical techniques evolution in the Sicilian territory in ancient times. Since the studied iron slags represent the unique traces so far known of metallurgical activity in the ancient Palermo town, our results open interesting perspectives for future study of metallurgy in ancient Sicily.197 124 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , New perspectives for the green economy in Sicily
Geopolymers are synthetic materials, which attract increasing interest because they represent a supplementary cementitious material as an alternative to Portland cement. Geopolymers are considered as environmentally friendly materials, due to the low processing temperature and the absence of CO2 gas emissions. These ecological features, linked to their technical properties, such as high strength, high acid resistance, and/or high-temperature resistance, make them very innovative technological materials. In addition, geopolymers show good performance if realized by the utilization of secondary raw materials (industrial wastes like fly ash or slag), thus improving strong interest in such technology from countries with growing industrialization. Here, in order to reduce global impacts and to stimulate the Sicilian green economy, we provide the evaluation of the Life Cycle Assessment (LCA) through the employ of local raw materials to produce geopolymers in Sicily. To reach this aim, geopolymers have been produced in collaboration with a Sicilian cement industry, through the use of local raw materials (furnace blast slag from Sicilian steelworks and Calabrian kaolinite) and the construction of a pilot plant. The obtained results show, for different scenarios, a considerable reduction of both CO2 emissions and energy consumption, but also a general improvement of the environmental indicators.33 87 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Environmental screening for the assessment of potentially toxic elements content in PGI soils from the Mediterranean region (Italy and Turkey)
To provide a contribution to the Thematic Strategy for Soil Protection, here we present the results of a study focused on the potentially toxic elements (PTE) content in agricultural soils’ representative for the Mediterranean region. To reach this aim, samples of 22 Italian (NE Peloritani Mountains, Sicily) and 18 Turkish (Amik Plain, Hatay) soils were collected and analyzed to evaluate their PTE content. The Italian and Turkish sites have been selected because they represent very important cultivation zones. In Amik Plain (Turkey), the dominant crops consist of cotton, wheat, corn and olives, whereas in NE Peloritani Mountains, Sicily (Italy), an appreciate citrus variety, known as the “Interdonato lemon”, guaranteed by Protected Geographical Indication label, is produced. The collected results include: (1) the assessment of PTE levels in soils; (2) the identifcation of the PTE sources; (3) the relationships between PTE contents and soil properties (pH, electrical conductivity, organic matter, CaCO3, and clay). Several multivariate statistical methods such as correlation matrix, cluster analysis and main component analysis were applied to individuate the anthropogenic vs natural origin of the PTE sources. The detected PTE levels are in decreasing order Mn>Zn>V>Cr>Cu>Ni>As>Pb>Co>Sb>Se>Cd for the Italian soils, and Mn> Ni>V>Zn>Cr>Cu>Pb>Co>As>Se>Sb>Cd for the Turkish soils. The overall obtained results allowed to defne: (a) a main lithogenic source for PTE detected in the Italian soils, except for Zn which origin is also associated to anthropogenic input; (b) a lithogenic origin for all of the PTE detected for the Turkish soils, with an associate anthropogenic contribution for Cr, Ni, V, Cu and V. The results obtained in this work enhance the knowledge in the individuation of PTE pollution sources in agricultural soils of the European Mediterranean region.54 6
