Lanucara, Piero
Preferred name
Lanucara, Piero
7 results
The search returned 7 results
Now showing 1 - 7 of 7
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Structural control on the Tohoku earthquake rupture process investigated by 3D FEM, tsunami and geodetic data
(2014-07-09); ; ; ; The 2011 Tohoku earthquake (Mw = 9.1) highlighted previously unobserved features for megathrust events, such as the large slip in a relatively limited area and the shallow rupture propagation. We use a Finite Element Model (FEM), taking into account the 3D geometrical and structural complexities up to the trench zone, and perform a joint inversion of tsunami and geodetic data to retrieve the earthquake slip distribution. We obtain a close spatial correlation between the main deep slip patch and the local seismic velocity anomalies, and large shallow slip extending also to the North coherently with a seismically observed low-frequency radiation. These observations suggest that the friction controlled the rupture, initially confining the deeper rupture and then driving its propagation up to the trench, where it spreads laterally. These findings are relevant to earthquake and tsunami hazard assessment because they may help to detect regions likely prone to rupture along the megathrust, and to constrain the probability of high slip near the trench. Our estimate of ~40 m slip value around the JFAST (Japan Trench Fast Drilling Project) drilling zone contributes to constrain the dynamic shear stress and friction coefficient of the fault obtained by temperature measurements to ~0.68 MPa and ~0.10, respectively.1208 235 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Computer animation as a tool to visualize effects of seismic wave propagation inside heterogeneous media
(2000-02); ; ;Caserta, A.; Istituto Nazionale di Geofisica, Roma, Italy ;Lanucara, P.; C.A.S.P.U.R., Università -La Sapienza-, Roma, ItalyA technique to make computer animations representing the propagation of antiplane shear waves in heterogeneous dissipative media is presented. The aim is to develop a useful tool to better investigate the physics of site effectsin the 2D approximation. We apply this technique to real case studies that were the subject of previous papers. For each case study a movie has been made to illustrate the wavefield time evolution and its interaction with the geological structure. All the movies can be seen and downloaded at the web site http://sigfrido.ingrm.it/movies.html. The paper shows the most representative frames of movies, providing an overview of the role played by the topographic irregularities and the geometry of internal discontinuities in trapping and focusing energy. The details of the dynamics are well visualized through movies. Particular attention is devoted to the representation of simulated ground motion in sediment-filled basins under resonance conditions. Problems related to color scales and frame normalization are analysed and discussed.195 959 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Probabilistic Tsunami Hazard Analysis: High Performance Computing for Massive Scale Inundation Simulations
(2020); ; ; ; Selva, JacopoProbabilistic Tsunami Hazard Analysis (PTHA) quantifies the probability of exceeding a specified inundation intensity at a given location within a given time interval. PTHA provides scientific guidance for tsunami risk analysis and risk management, including coastal planning and early warning. Explicit computation of site-specific PTHA, with an adequate discretization of source scenarios combined with high-resolution numerical inundation modelling, has been out of reach with existing models and computing capabilities, with tens to hundreds of thousands of moderately intensive numerical simulations being required for exhaustive uncertainty quantification. In recent years, more efficient GPU-based High-Performance Computing (HPC) facilities, together with efficient GPU-optimized shallow water type models for simulating tsunami inundation, have now made local long-term hazard assessment feasible. A workflow has been developed with three main stages: 1) Site-specific source selection and discretization, 2) Efficient numerical inundation simulation for each scenario using the GPU-based Tsunami-HySEA numerical tsunami propagation and inundation model using a system of nested topo-bathymetric grids, and 3) Hazard aggregation. We apply this site-specific PTHA workflow here to Catania, Sicily, for tsunamigenic earthquake sources in the Mediterranean. We illustrate the workflows of the PTHA as implemented for High-Performance Computing applications, including preliminary simulations carried out on intermediate scale GPU clusters. We show how the local hazard analysis conducted here produces a more fine-grained assessment than is possible with a regional assessment. However, the new local PTHA indicates somewhat lower probabilities of exceedance for higher maximum inundation heights than the available regional PTHA. The local hazard analysis takes into account small-scale tsunami inundation features and non-linearity which the regional-scale assessment does not incorporate. However, the deterministic inundation simulations neglect some uncertainties stemming from the simplified source treatment and tsunami modelling that are embedded in the regional stochastic approach to inundation height estimation. Further research is needed to quantify the uncertainty associated with numerical inundation modelling and to properly propagate it onto the hazard results, to fully exploit the potential of site-specific hazard assessment based on massive simulations.295 118 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , DOiT: a graphic tool for the inversion of deformation data
(2007-04-16); ; ; ; Tagliaventi, S.; Consorsio Interuniversitario per le applicazioni di Supercalcolo per Università e Ricerca, RomaDOIT (Data Optimization Integrated Tool) is an ongoing project to develop a tool to perform inversions of deformation data by global optimization running on a commodity supercomputer. Its main task is to facilitate the user about the interpretation of deformation data (GPS, InSAR, leveling, etc.) due to different geophysical sources such as seismic dislocation or volcanic inflation. We have developed a graphic interface assisting the user during the required steps to set-up and solve the inversion problem: data importation, model and parameters space definition, job submission, monitoring and results visualization. The user can import data in some predefined formats or define his own custom format. The forward models embedded in the tool are analytical descriptions of simple sources like isotropic point-source, finite spheroid, or general dislocation. A further feature is the possibility to use as forward model arrays of precomputed solutions based on finite element or other numerical techniques so that it is possible to take into account some realistic features (e.g. topography). The user has the capability to choose from few direct search methods such as Monte Carlo, simulated annealing or the more efficient Neighbourhood Algorithm. In this last case it is possible to perform a bayesian appraisal of the sampled solutions. The main paradigm of the tool is a client-server structure. The client machine submits jobs and retrieves information about the state of the running task; the graphical interface takes care also to link the computing front-end and the client machine itself. Since all the search algorithms are implemented using the MPI library, users can take advantage of parallel runs on cluster machines without knowing details either of MPI codes or the use of a batch queue in a distributed computing environment. The tool is a C++ application running on a dedicated Linux computer and is written using QT4 graphic libraries (the same libraries of the KDE window manager) which offer powerful options. An important feature of the DOIT tool is the communication with clients. When the client, (a piece of software available for almost any OS) asks for the user interface service, DOIT exports its graphical environment to a session on the client itself, using the X-protocol with high compression technology. This limits the needs of a fast connection between the client and the server, maintaining a high interactivity at the same time. Furthermore, the protocol is encapsulated over SSL, facilitating a safe communication with the server. DOIT has an open structure allowing to easily modify the application, adding forward models or implementing new inversion algorithm. We present a test of the DOIT capabilities, running inversions on an IBM P575 with 168 Power5 processors installed at CASPUR.210 508 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The Sensitivity of Tsunami Impact to Earthquake Source Parameters and Manning Friction in High-Resolution Inundation Simulations
(2022-01); ; ; ; Selva, JacopoIn seismically active regions with variable dominant focal mechanisms, there is considerable tsunami inundation height uncertainty. Basic earthquake source parameters such as dip, strike, and rake affect significantly the tsunamigenic potential and the tsunami directivity. Tsunami inundation is also sensitive to other properties such as bottom friction. Despite their importance, sensitivity to these basic parameters is surprisingly sparsely studied in literature. We perform suites of systematic parameter searches to investigate the sensitivity of inundation at the towns of Catania and Siracusa on Sicily to changes both in the earthquake source parameters and the Manning friction. The inundation is modelled using the Tsunami-HySEA shallow water code on a system of nested topo-bathymetric grids with a finest spatial resolution of 10 m. This GPU-based model, with significant HPC resources, allows us to perform large numbers of high- resolution tsunami simulations. We analyze the variability of different hydrodynamic parameters due to large earthquakes with uniform slip at different locations, focal depth, and different source parameters. We consider sources both near the coastline, in which significant near-shore co-seismic deformation occurs, and offshore, where near- shore co-seismic deformation is negligible. For distant offshore earthquake sources, we see systematic and intuitive changes in the inundation with changes in strike, dip, rake, and depth. For near-shore sources, the dependency is far more complicated and co- determined by both the source mechanisms and the coastal morphology. The sensitivity studies provide directions on how to resolve the source discretization to optimize the number of sources in Probabilistic Tsunami Hazard Analysis, and they demonstrate a need for a far finer discretization of local sources than for more distant sources. For a small number of earthquake sources, we study systematically the inundation as a function of the Manning coefficient. The sensitivity of the inundation to this parameter varies greatly for different earthquake sources and topo-bathymetry at the coastline of interest. The friction greatly affects the velocities and momentum flux and to a lesser but still significant extent the inundation distance from the coastline. An understanding of all these dependencies is needed to better quantify the hazard when source complexity increases.131 78 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The EU Center of Excellence for Exascale in Solid Earth (ChEESE): Implementation, results, and roadmap for the second phase
The EU Center of Excellence for Exascale in Solid Earth (ChEESE) develops exascale transition capabilities in the domain of Solid Earth, an area of geophysics rich in computational challenges embracing different approaches to exascale (capability, capacity, and urgent computing). The first implementation phase of the project (ChEESE-1P; 2018–2022) addressed scientific and technical computational challenges in seismology, tsunami science, volcanology, and magnetohydrodynamics, in order to understand the phenomena, anticipate the impact of natural disasters, and contribute to risk management. The project initiated the optimisation of 10 community flagship codes for the upcoming exascale systems and implemented 12 Pilot Demonstrators that combine the flagship codes with dedicated workflows in order to address the underlying capability and capacity computational challenges. Pilot Demonstrators reaching more mature Technology Readiness Levels (TRLs) were further enabled in operational service environments on critical aspects of geohazards such as long-term and short-term probabilistic hazard assessment, urgent computing, and early warning and probabilistic forecasting. Partnership and service co-design with members of the project Industry and User Board (IUB) leveraged the uptake of results across multiple research institutions, academia, industry, and public governance bodies (e.g. civil protection agencies). This article summarises the implementation strategy and the results from ChEESE-1P, outlining also the underpinning concepts and the roadmap for the on-going second project implementation phase (ChEESE-2P; 2023–2026).370 215 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Towards the new Thematic Core Service Tsunami within the EPOS Research Infrastructure
Tsunamis constitute a significant hazard for European coastal populations, and the impact of tsunami events worldwide can extend well beyond the coastal regions directly affected. Understanding the complex mechanisms of tsunami generation, propagation, and inundation, as well as managing the tsunami risk, requires multidisciplinary research and infrastructures that cross national boundaries. Recent decades have seen both great advances in tsunami science and consolidation of the European tsunami research community. A recurring theme has been the need for a sustainable platform for coordinated tsunami community activities and a hub for tsunami services. Following about three years of preparation, in July 2021, the European tsunami community attained the status of Candidate Thematic Core Service (cTCS) within the European Plate Observing System (EPOS) Research Infrastructure. Within a transition period of three years, the Tsunami candidate TCS is anticipated to develop into a fully operational EPOS TCS. We here outline the path taken to reach this point, and the envisaged form of the future EPOS TCS Tsunami. Our cTCS is planned to be organised within four thematic pillars: (1) Support to Tsunami Service Providers, (2) Tsunami Data, (3) Numerical Models, and (4) Hazard and Risk Products. We outline how identified needs in tsunami science and tsunami risk mitigation will be addressed within this structure and how participation within EPOS will become an integration point for community development.412 97
