Fubelli, Giandomenico
Preferred name
Fubelli, Giandomenico
Main Affiliation
Email
giandomenico.fubelli@unito.it
ORCID
Scopus Author ID
12767622600
22 results
Filters
Settings
The search returned 22 results
Now showing 1 - 10 of 22
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Constraining primary surface rupture length along the Paganica fault (2009 L’Aquila earthquake) with geological and geodetic (DInSAR and GPS) data
(2012); ; ; ; Field surveys performed by different research groups after the April 6, 2009 L’Aquila earthquake (Mw 6.1; CHIARALUCE et alii, 2011) identified the occurrence of surface faulting along the Paganica normal fault, the causative seismogenic source of the event. The different researchers provided patterns of surface rupture that slightly differ as for the northern and southern portion of the Paganica fault. We here integrated coseismic geodetic data – DInSAR and GPS – with geological observations in order to discriminate what, among the different surface rupture patterns, can be considered as evidence of primary surface faulting. Our results indicated that the Mt. Stabiata-Mt. Castellano faults, to the north, and the San Demetrio fault, to the south – along to which BONCIO et alii (2010) and GALLI et alii (2010) detected ground ruptures, respectively – probably activated solely as sympathetic (sensu SleMMONS & DEPOLO, 1986; DEPOLO, 1994) tectonic structures during the 2009 earthquake. These observations allowed to constrain the extension of the primary surface faulting from the Collebrincioni sector to the area of San Gregorio, thus representing the northern and the southern tips of the Paganica fault, respectively. This defines a total surface rupture length of 12-13 km. Our results highlight the effectiveness of entwining geological and geodetic data to discriminate primary surface faulting from secondary fault ruptures, particularly in cases of moderate magnitude earthquakes, i.e. when modest and rather subtle surface faulting can occur.273 32 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Deep reaching versus vertically restricted Quaternary normal faults: implications on seismic potential assessment in tectonically active regions. Lessons from the middle Aterno valley fault system, central Italy
(2015); ; ; ; We investigate the Middle Aterno Valley fault system (MAVF), unknown poorly investigated seismic gap in the central Apennines, adjacent to the 2009 L’Aquila earthquake epicentral area. Geological and paleoseismological analyses revealed that the MAVF evolved through hanging wall splay nucleation, its main segment moving at 0.23-0.34 mm/year since the Middle Pleistocene; the penultimate activation event occurred between 5388-5310 B.C. and 1934-1744 B.C., the last event after 2036-1768 B.C. and just before 1st-2nd century AD. These data define hard linkage (sensu Walsh and Watterson, 1991; Peacock et al., 2000; Walsh et al., 2003, and references therein) with the contiguous Subequana Valley fault segment, able to rupture in large magnitude earthquakes (up to 6.8), that did not rupture since about two millennia. By the joint analysis of geological observations and seismological data acquired during to the 2009 seismic sequence, we derive a picture of the complex structural framework of the area comprised between the MAVF, the Paganica fault (the 2009 earthquake causative fault) and the Gran Sasso Range. This sector is affected by a dense array of few-km long, closely and regularly spaced Quaternary normal fault strands, that are considered as branches of the MAVF northern segment. Our analysis reveals that these structures are downdip confined by a decollement represented by to the presently inactive thrust sheet above thef Gran Sasso front limiting their seismogenic potential. Our study highlights the advantage of combining Quaternary geological field analysis with high resolution seismological data to fully unravel the structural setting of regions where subsequent tectonic phases took place and where structural interference plays a key role in influencing the seismotectonic context; this has also inevitably implications for accurately assessing seismic hazard of such structurally complex regions.275 114 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Evidenze di fagliazione inversa quaternaria nel settore ionico nord-orientale della Calabria (Rossano Calabro)
(2008-06-05); ; ; ; Il settore dell’arco Calabro è interessato da sistemi di faglie normali attive, responsabili di forti terremoti storici di Magnitudo superiore a 6. Gli eventi sismici maggiori sono avvenuti principalmente tra lo stretto di Messina e la valle del Crati. Tra questi il terremoto del 1783 (M=6.9), del 1905 (M=7.3), del 1638 (M=6.7), del 1832 (M=6.5) e del 1836 (M=6.2) (Working Group CPTI 04). Alcuni di questi eventi sono stati associati all’attivazione di alcune strutture tettoniche (Galli & Scionti 2006; Galli & Bosi 2002; Valensise & Pantosti 2001). L’evento del 1836, che ha colpito il settore nord-orientale della Calabria, poco a sud della piana di Sibari, è stato associate tentativamente da Moretti (2000) all’attivazione di una serie di segmenti di faglia orientati E-W e NW-SE individuati tra Corigliano e Rossano. Questo lavoro ha come scopo quello di individuare strutture sismogenetiche attive nell’area colpita dall’evento sismico del 1836 ed, in particolare, quelle causative dell’evento sismico del 1836. A tal fine sono stati effettuati rilevamenti geologici e geomorfologici, con particolare riguardo alla zona dell’abitato di Mirto, poco a sud della città di Rossano Calabro, dove uno scavo ha messo in evidenza depositi di origine marina in facies deltizia, datati per via paleontologica ad un’età non più antica dell’Emiliano (Pleistocene inferiore), dislocati da una struttura tettonica ad orientazione circa NNW-SSE, a cinematica prevalentemente inverse, con senso di trasporto verso SSW. La dislocazione sembra interessare anche depositi continentali fluvio-colluviali incassati all’interno dei depositi deltizi e separati da questi da una superficie di erosione. Da questi sedimenti continentali è stato prelevato un campione per effettuare una datazione radiometrica, ancora in corso. La localizzazione di questa struttura tettonica è compatibile con l’ubicazione della zona epicentrale del terremoto del 1836, derivata dai dati macrosismici (CPTI 04). Inoltre, lungo il lineamento, pochi km a nord dello scavo studiato, in località Cento Fontane, viene segnalata risorgenza di acque calde in occasione dell’evento sismico menzionato.244 312 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Una metodologia GIS per la valutazione della suscettibilità da frana
(2010); ; ; ; GIS methodology to assess landslide susceptibility: application to a river catchment of central Italy This paper illustrates a GIS supported methodology for the assessment of landslide susceptibility. The methodology involves four steps: survey, site analysis, macro-area analysis, and susceptibility analysis. Statiscal and GIS processing of basical large scale geological dataset leads to the recognition of discriminating parameters (land conditions necessary but not sufficient to trigger landslides) and predisposing factors (conditions that worsen slope stability) separately for each landslides types. The susceptibility function combines GIS data to draw landslide susceptibility maps. These results represent the preliminary step for the assessment of landslide hazard and risk.334 86 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Rilievi geologici di terreno effettuati nell’area epicentrale della sequenza sismica dell’Aquilano del 6 aprile 2009
(2009-04-30) ;INGV - Emergeo working group; ; ; 364 342 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Evoluzione quaternaria del bacino di Leonessa (Rieti)
(2008); ; ; ; Fubelli, G.; Università degli Studi Roma TreIl bacino di Leonessa è una delle maggiori depressioni tettoniche intermontane dell’Appennino Centrale. A differenza dalle altre depressioni, disposte in direzione appenninica con la faglia bordiera principale sul lato orientale, il bacino è orientato in senso WNW - ESE ed ha la faglia bordiera principale sul suo margine sud-occidentale. Il più antico deposito di origine continentale che riempie la depressione non è affiorante ed è stato rinvenuto solo in alcuni sondaggi. E’ costituito da alternanze di sabbie-argillose e ghiaie (attribuite da GE.MI.NA. ad un generico Pliocene). I sedimenti affioranti sono stati distinti in sintemi. Quello stratigraficamente più basso è il Sintema di Villa Pulcini, costituito da un alternanza di argille, argille torbose, marne e sabbie argillose di ambiente deposizionale da lacustre a piana a canali intrecciati (braided plain), attribuibili alla parte alta del Pleistocene inferiore. Il Sintema di Villa Pulcini è parzialmente coperto dal Sintema di Leonessa, costituito da depositi di conoide alluvionale (conoide della Vallonina) a ovest e da depositi lacustri a est, ambedue contenenti, nella parte alta, intercalazioni di vulcaniti risedimentate. Il ritrovamento di un molare di M. (M.) trogontherii all’interno di depositi alluvionali consente di riferire al Galeriano (U.F. Slivia - ? U.F. Fontana Ranuccio) la porzione basale del sistema. I due sintemi precedenti sono coperti a tratti da sabbie e sabbie argillose rossastre (Sintema di Terzone), con spessore che raramente supera i 5 metri, ricche di elementi vulcanici rimaneggiati. Nella parte più meridionale del bacino, all’interno della profonda incisione del Fosso Tascino, sono localmente presenti due ordini di terrazzi alluvionali. Attualmente il Fosso Tascino mostra un tipico esempio di letto a canali intrecciati (braided), con una piana che supera i 100 m di larghezza. Nella zona di raccordo tra il versante NE del Monte Tilia e i Sintemi di Leonessa e di Terzone, sono stati riconosciuti due ordini di conoidi alluvionali sovrapposti, costituiti in prevalenza da sedimenti ghiaiosi con una minore componente sabbiosa, poggianti in discordanza sui sedimenti più antichi. La definizione degli eventi erosivo-deposizionali che hanno contraddistinto l’evoluzione del paesaggio nel bacino di Leonessa costituisce un passo ulteriore verso un più preciso inquadramento temporale dell’attività tettonica distensiva, del sollevamento regionale e dei cambiamenti climatici che hanno portato all’attuale assetto geomorfologico dell’Appennino Centrale.466 478 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Evidence of active inverse faulting in the north-eastern sector of the Calabrian arc (Italy)
(2008-09-07); ; ; ; The Calabrian arc represents an accretionary wedge located between the southern Apennines and the Maghrebian chain from which it is separated by two regional shear zones, i.e. the “Pollino Line” and “Taormina Line”, respectively. Since the Pliocene, extension affected the Calabrian chain, determining the formation of normal faults systems. Paleoseismological investigations allowed to associate some of the strongest historical earthquakes occurred in the Calabrian region (Mw up to 7.5) to some of these normal faults. We analyse the north-eastern sector of the arc which is characterised by a complex structural setting, being affected by the Pollino Line. Indeed, an ~E-W trending fault system (Rossano Fault) cut the area. This fault system displays a complex kinematic history, with the superimposition, during the Quaternary, of a normal kinematics over an older strike-slip one. About two km SE of the Mirto village, an excavation exposed marine deposits, attributed by means of paleontological analyses to an age not older than the Lower Pleistocene, overlain by alluvial-colluvial sediments. These deposits have been deformed by a compressive, NW-SE trending fault, verging landwards. The continental sediments affected by the fault have been radiocarbon dated between 10.018±43 BP and 8397±47 BP. This fault may represent the surficial expression of 1) a splay of a back-thrust, related to a main active thrust verging towards NE or 2) an active NW-SE transpressive fault or 3) a local compressive deforma-tion (i.e. a restraining bend) related to an active strike-slip fault. Works are still in progress in order to define the relationship of this compressive fault with the near Rossano fault, to which Galli et al (2006d) attributes a Late Holocene normal activity, considering that this sector has been struck in 1836 by a strong earthquake (Mw=6.2), the causative fault of which has been only tentatively related to the aforementioned Rossano fault.242 354 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , GIS Methodology to Assess Landslide Susceptibility: Application to a River Catchment of Central Italy
(2012-01-23); ; ; ; This paper illustrates a geographic information system (GIS) supported methodology for the assessment of landslide susceptibility. The methodology involves four operational steps: survey, site analysis, macro- area analysis and susceptibility analysis . The Survey includes the production (or acquisition) of a large-scale litho-technical map, a large-scale geomorphological map, a detailed inventory of past and present land- slide events, and a high resolution DTM (Digital Terrain Model. Site analysis leads to the definition of discriminating parameters (commonly, lithological and morphometric conditions necessary but not suffi- cient to trigger a landslide of a given type) and predisposing factors (conditions that worsen slope stability but are not sufficient to trigger a landslide of a given type in the absence of discriminating parameters ). The different predisposing factors are subdivided into classes, whose intervals are established by descriptive, statistical analysis of landslide inventory data. A numerical index, based on the frequency of landslide occurrence, quantifies the contribution of each class to slope instability. Macro-area analysis includes the generation of Litho-Morphometric Units (LMU) by overlaying discrimina- ting parameters , manual drawing of LMU envelopes ( macro-areas ), generation of predisposing factor maps from the spatial distribution of predisposing factors , and heuristic weighting of predisposing factor indices. Susceptibility analysis includes the generation of Homogeneous Territorial Units (HTU) by overlaying macro- areas and predisposing factor maps , and the application of a susceptibility function to the different HTU. The resulting values are normalized before the generation of the landslide susceptibility maps . The methodo- logy has been applied to the Fiumicino River catchment, located in the western side of Latium Apennine (Central Italy) between 200 and 1300 m a.s.l. and developed on Late Miocene calcarenites, sandstones with clay intercalations, and marls. The resulting landslide susceptibility maps will be employed in envi- ronmental management. They also represent the preliminary step for the assessment of landslide hazard and risk241 30 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Faglie attive e sismotettonica dell’Italia centrale: dalla sequenza sismica del 1997 a quella del 2016-2017. Venti anni di sismicità appenninica analizzati attraverso un approccio multidisciplinare
Negli ultimi 20 anni l’Italia centrale è stata colpita da tre sequenze sismiche che hanno causato centinaia di vittime e ingentissimi danni all’edificato, a partire da quella umbro-marchigiana del 1997. La sequenza sismica di Colfiorito-Sellano del 1997 fu la prima in Italia ad essere studiata in modo approfondito attraverso diverse metodologie di analisi, geologiche, sismologiche e geodetiche. Successivamente, il crescente avanzamento tecnologico e l’integrazione di diverse discipline e tecniche di indagine ha poi reso quello del 2009 dell’Aquila il terremoto per faglia normale meglio studiato al mondo, fino alla sequenza sismica del 2016-2017. Quest’ultima ha determinato l’impegno di decine di gruppi di ricerca italiani ed esteri nella comprensione del processo sismogenetico che ha dato luogo alla più importante sequenza sismica, in termini energetici e di vastità di area coinvolta, degli ultimi cento anni di questo settore del territorio nazionale. L’analisi della letteratura scientifica prodotta a seguito di queste sequenze sismiche evidenzia tuttavia che ad oggi rimango alcuni nodi non sciolti, alcune incertezze e diversità di interpretazione sui processi sismogenetici che le hanno causate e, più ingenerale, sul quadro sismotettonico dell’Appennino centrale. Il presente contributo ha lo scopo di mostrare il quadro delle conoscenze relative alle tre sequenze sismiche in esame; attraverso l’interpretazione delle informazioni disponibili, acquisite sia prima che dopo gli eventi sismici, e a nuove analisi sui dati raccolti durante le tre sequenze, aiuta a fornire una chiave di lettura “neotettonica” della sismicità maggiore dell’Italia centrale, nonché nuove prospettive in termini di definizione del potenziale sismico associabile alle principali sorgenti sismogenetiche.117 62 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Active transpressive surface faulting in north-eastern calabria, southern Italy: early results of geomorphological, stratigraphic and paleoseismological analyses
We here first described field evidence of Holocene transpressive faulting in north-eastern Calabria, about 15 km east of Rossano, in the area of Mirto. There, we analysed a stratigraphic sequence exposed along a WNW-ESE trending, 4-km-long scarp, anomalous in the local geomorphic context. The sequence was made of marine deltaic sediments with embedded colluvial deposits, daylighted by an excavation for a building. The excavation occurred on top of a fluvial terrace at ~15 m a.s.l., that was embedded in a MIS 5a marine terrace. Micropaleothological analysis and 14C radiometric dating defined an Early(-Middle) Pleistocene age for the marine sequence and a Holocene age for the overlain colluvial deposits. The whole sequence was back-tilted, warped and offset along shear planes showing an evident reverse sense of motion. The uphill sense of displacement, the local geomorphic setting and the available literature allowed to exclude any other cause (e.g. deep-seated or shallow landsliding, salt diapirism) than tectonics for the observed deformations. By considering the current knowledge about the structural and active tectonic framework of the northern Calabrian Arc, the observed reverse fault planes can be the surface expression of either local active compressional deformations (i.e. restraining bend) along the Rossano-Cirò Marina strike slip shear zone, being part of the regional, left-later strike-slip Pollino Line, or an inland splay of the active transpressional tectonic structures offshore of the Sibari Plain and the Rossano area. Even if at an early stage, our observations can represent a new piece in the active tectonics puzzle of the boundary region between the Calabrian Arc and the southern Apennines. They also provide new hints for seismotectonic evaluations, taking into thorough consideration that the ob-served tectonic features occur in the epicentral area of the 1836 (Mw 6.2) earthquake, the causative fault of which is still debated. Ultimately, the present study raises new questions about reverse surface faulting hazard assessment for this region.107 7
