Skip to main content
The search returned 24 results
Now showing 1 - 10 of 24
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Crustal structure and Moho depth profile crossing the central Apennines (Italy) along the N42 degree parallel.

    (2008) ; ; ;
    Di Bona, M.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione CNT, Roma, Italia
    ;
    Lucente, F. P.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione CNT, Roma, Italia
    We present results from a teleseismic receiver-function study of the crustal structure in the central Apennines (Italy). Data from fifteen stations deployed in a linear transect running along the N42 degree parallel were used for the analysis. A total number of 364 receiver functions were analyzed. The crustal structure has been investigated using the neighborhood algorithm inversion scheme proposed by Sambridge [1999a], obtaining crustal thicknesses, bulk crustal VP/VS ratio and velocity-depth models. In each inversion, the degree of constraint of the different parameters has been appraised by the Bayesian inference algorithm by Sambridge [1999b]. The study region is characterized by crustal complexities and intense tectonic activity (recent volcanism, orogenesis, active extensional processes), and these complexities are reflected in the receiver functions. However, the relatively close spacing among the seismometers (about 20 km) helped us in the reconstruction of the crustal structure and Moho geometry along the transect. Crossing the Apennines from west to east, the Moho depth varies by more than 20 km, going from a relatively shallow depth (around 20 km) on the Tyrrhenian side, deepening down to about 45 km depth beneath the external front of the Apenninic orogen, and rising up again to about 30 km depth in correspondence of the Adriatic foreland. Despite the strong variability of the crustal thickness, the average crustal VS values show little variation along the transect, fluctuating around 3 km/s. The average VP values obtained from the VS and VP /VS are generally lower than 6 km/s.
      227  483
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The Italian Earthquakes and Tsunami Monitoring and Surveillance Systems

    The Osservatorio Nazionale Terremoti (ONT) is the Italian seismic operational centre for monitoring earthquake, it is part of Istituto Nazionale di Geofisica e Vulcanologia (INGV) the largest Italian research institution, with focus in Earth Sciences. INGV runs the Italian National Seismic Network (network code IV) and other networks at national scale for monitoring earthquakes and tsunami. INGV is a primary node of European Integrated Data Archive (EIDA) for archiving and distributing, continuous, quality checked seismic waveforms (strong motion and weak motion recordings). ONT designed the data acquisition system to accomplish, in near-real-time, automatic earthquake detection, hypocentre and magnitude determination and evaluation of moment tensors, shake maps and other products. Database archiving of all parametric results are closely linked to the existing procedures of the INGV seismic monitoring environment and surveillance procedures. ONT organize the Italian earthquake surveillance service and the tsunami alert service (INGV is Tsunami Service Provider of the ICG/NEAM for the entire Mediterranean basin). We provide information to the Dipartimento di Protezione Civile (DPC) and to several Mediterranean countries. Earthquakes information are revised routinely by the analysts of the Italian Seismic Bulletin. The results are published on the web and are available to the scientific community and the general public.
      249  124
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Passive seismology and deep structure in central Italy

    n the last decade temporary teleseismic transects have become a powerful tool for investigating the crustal and upper mantle structure. In order to gain a clearer picture of the lithosphere-asthenosphere structure in peninsular Italy, between 1994 and 1996, we have deployed three teleseismic transects in northern, central, and southern Apennines, in the framework of the project GeoModAp (European Community contract EV5V-CT94–0464). Some hundreds of teleseisms were recorded at each deployment which lasted between 3 and 4 months. Although many analyses are still in progress, the availability of this high quality data allowed us to refine tomographic images of the lithosphere-asthenosphere structure with an improved resolution in the northern and central Apennines, and to study the deformation of the upper mantle looking at seismic anisotropy through shear-wave splitting analysis. Also, a study of the depth and geometry of the Moho through the receiver function technique is in progress. Tomographic results from the northernmost 1994 and the central 1995 teleseismic experiments confirm that a high-velocity anomaly (HVA) does exist in the upper 200–250 km and is confined to the northern Apenninic arc. This HVA, already interpreted as a fragment of subducted lithosphere is better defined by the new temporary data, compared to previous works, based only on data from permanent stations. No clear high-velocity anomalies are detected in the upper 250 km below the central Apennines, suggesting either a slab window due to a detachment below southern peninsular Italy, or a thinner, perhaps continental slab of Adriatic lithosphere not detectable by standard tomography. We found clear evidence of seismic anisotropy in the uppermost mantle, related to the main tectonic processes which affected the studied regions, either NE–SW compressional deformation of the lithosphere beneath the mountain belt, or arc-parallel asthenospheric flow (both giving NW–SE fast polarization direction), and successive extensional deformation ( E–W trending) in the back-arc basin of northern Tyrrhenian and Tuscany. Preliminary results of receiver function studies in the northern Apennines show that the Moho depth is well defined in the Tyrrhenian and Adriatic regions while its geometry underneath the mountain belt is not yet well constrained, due to the observed high complexity.
      156  4
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Broadband waveforms and site effects at a borehole seismometer in the Po alluvial basin (Italy)

    Broadband seismograms recorded at a borehole three-component (high dynamic range) seismic station in the Po Valley (Northern Italy) were analyzed to study the velocity structure of the shallow sedimentary layers as well as the local site effects in soft sediments. The broadband borehole seismometer was installed at a depth of 135 m just below the quaternary basement, while a second digital broadband seismometer was installed in the same site at the Earth surface. The velocity structure in the shallower layers was determined both by means of cross-hole and up-hole measurements and by inverting seismic data recorded during a seismic exploration experiment.Velocity discontinuities are quite well related to the stratigraphy of the site. We are interested to record local earthquakes as well as regional and teleseismic events. The analyzed data set includes local, regional and teleseismic events, most of which were recorded during the seismic sequence that started on October 15, 1996, near Reggio Emilia 80 km away from the borehole site. The orientation of the borehole sensor is determined using the recordings of a teleseismic event and of some local earthquakes. The noise reduction for the borehole sensor is 2 decades in power spectral density at frequencies larger than 1.0 Hz. We studied the site amplification of the shallow alluvial layers by applying the spectral ratio method. We analyzed the spectral ratios of noise recorded by the surface and borehole seismometers as well as those from local earthquakes. We compared these observations with a theoretical model for the site response computed by the Haskell-Thomson method.
      438  2376
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Monte Carlo technique in modeling ground motion coherence in sedimentary filled valleys

    (2010-02) ; ;
    Caserta, A.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Roma1, Roma, Italia
    ;
    Di Bona, M.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Roma1, Roma, Italia
    ;
    Using a Monte Carlo method based on a random walk in ad hoc N-dimensional phase space, we construct N random time series having prescribed coherence spatial decay. We apply the method in seismology by designing a numerical experiment to investigate how the coherence of the bedrock motion relates to the coherence of the surface ground motion in a sedimentary valley. The main features of the coherence behavior in the valley are found to tie in with data analysis and field observations.
      228  23
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Seismic activity in the Pollino region (Basilicata-Calabria border)

    The Pollino region and the whole Calabria-Lucania border are known for the absence of destructive (M>6) historical earthquakes. This lack of historical seismicity is noticeable in the analysis of Southern Apennines and Calabria earthquake history (Rovida et al., 2011). At the same time, paleoseismological studies found evidence for significant active faulting (Cinti et al., 1997; Michetti et al., 1997) pointing to the Pollino area as a seismic gap. Instrumental seismicity in the region is characterized by the occurrence of seismic sequences, one of the most significant in the last decades is the Mercure seismic sequence, Mw 5.6 in September 1998 (Brozzetti et al., 2008). For this reason, the sequence started in 2010 raised a big concern in the population and local authorities. INGV is following the evolution of the sequence since its beginning, in March 2010, increasing the seismic monitoring and planning several activities and projects. The area was proposed by INGV to DPC (Dipartimento di Protezione Civile nazionale) for inclusion in the projects to be carried out in the present INGV-DPC agreement. This project has just started and will try to provide better constraints to the active tectonics and fault identification of the region. In this paper we describe what INGV is doing to understand better the tectonics of the region using microseismicity, and try to offer some cue to the discussion about the seismogenic faults in the area.
      737  175
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Main shock and aftershocks of the December 13, 1990, Eastern Sicily earthquake

    n this paper we describe the location and the fault plane solution of the December 13, 1990, Eastern Sicily earthquake (ML = 5.4), and of its aftershock sequence. Because the main shock location is not well constrained due to the geometry of the permanent National Seismic Network in this area, we used a "master event" algorithm to locate it in relation to a well located aftershock. The revised location is slightly offshore Eastern Sicily, 4.8 km north of the largest aftershock (ML = 4.6) that occurred on December 16, 1990. The main shock has a strike-slip mechanism, indicating SE-NW compression with either left lateral motion on a NS plane, or right lateral on an EW plane. Two days after the main event we deployed a local network of eight digital stations, that provided accurate locations of the aftershocks, and the estimate of source parameters for the strongest earthquake. We observed an unusual quiescence after the ML = 5.4 event, that lasted until December 16, when a ML = 4.6 earthquake occurred. The fault plane solution of this aftershock shows normal faulting on E-W trending planes. Between December 16 and January 6, 1991, a sequence of at least 300 aftershock" was recorded by the local network. The well located earthquakes define a small source region of approximately 5 x 2 x 5 km3, with hypocentral depths ranging between 15 and 20 km. The paucity of large aftershocks, the time gap between the main shock occurrence and the beginning of the aftershock sequence (3.5 days), their different focal mechanisms (strike-slip vs. normal), and the different stress drop between main shock and after- shock suggest that the ML = 5.4 earthquake is an isolated event. The sequence of aftershocks began with the ML = 4.6 event, which is probably linked to the main shock with a complex mechanism of stress redistribution after the main faulting episode.
      278  415
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Analysis of strong-motion data of the 1990 Eastern Sicily earthquake

    The strong motion accelerograms recorded during the 1990 Eastern Sicily earthquake have been analyzed to investigate source and attenuation parameters. Peak ground motions (peak acceleration, velocity and displacement) overestimate the values predicted by the empirical scaling law proposed for other Italian earthquakes, suggesting that local site response and propagation path effects play an important role in interpreting the observed time histories. The local magnitude, computed from the strong motion accelerograms by synthesizing the Wood-Anderson response, is ML = 5.9, that is sensibly larger than the local magnitude estimated at regional distances from broad-band seismograms (ML = 5.4). The standard omega-square source spectral model seems to be inadequate to describe the observed spectra over the entire frequency band from 0.2 to 20 Hz. The seismic moment estimated from the strong motion accelerogram recorded at the closest rock site (Sortino) is Mo = 0.8 x 1024 dyne.cm, that is roughly 4.5 times lower than the value estimated at regional distances (Mo = 3.7 x 1024 dyne.cm) from broad-band seismograms. The corner frequency estimated from the accelera- tion spectra i.5 J; = 1.3 Hz, that is close to the inverse of the dUl.ation of displacement pulses at the two closest recording sites. This value of corner tì.equency and the two values of seismic moment yield a Brune stress drop larger than 500 bars. However, a corner frequency value off; = 0.6 Hz and the seismic moment resulting from regional data allows the acceleration spectra to be reproduced on the entire available frequency band yielding to a Brune stress drop of 210 bars. The ambiguity on the corner frequency value associated to this earthquake is due to the limited frequency bandwidth available on the strong motion recordil1gs. Assuming the seismic moment estimated at regional distances from broad-band data, the moment magnitude for this earthquake is 5.7. The higher local magnitude (5.9) compared with the moment magnitude (5.7) is due to the weak regional attenuation. Beside this, site amplifications due to surface geology have produced the highest peak ground motions among those observed at the strong motion sites.
      283  716
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Rapid response seismic networks in Europe: the lesson learned from L’Aquila earthquake emergency.

    The largest dataset ever recorded during a normal fault seismic sequence was acquired during the 2009 seismic emergency triggered by the damaging earthquake in L'Aquila (Italy). This was possible through the coordination of different rapid-response seismic networks in Italy, France and Germany. A seismic network of more than 60 stations recorded up to 70,000 earthquakes. Here, we describe the different open-data archives where it is possible to find this unique set of data for studies related to hazard, seismotectonics and earthquake physics. Moreover, we briefly describe some immediate and direct applications of emergency seismic networks. At the same time, we note the absence of communication platforms between the different European networks. Rapid-response networks need to agree on common strategies for network operations. Hopefully, over the next few years, the European Rapid-Response Seismic Network will became a reality.
      1026  250
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Complex Normal Faulting in the Apennines Thrust-and-Fold Belt: The 1997 Seismic sequence in Central Italy

    A long sequence of moderate-magnitude earthquakes (5 M 6) struck central Italy in September and October 1997. At the end of the sequence a year later, the seismogenic area extends for about 60 km along the Apennines. The analysis of historical seismicity suggests that this seismic sequence filled a 700-year gap in this portion of the chain. Other historical sequences in the same area are characterized by prolonged seismic release on adjacent fault segments, probably due to the involvement of shallow and complex structures inherited by the compressive tectonics. The distribution of seismicity and the fault-plane solutions show that the extension in this region is accomplished by normal faults dipping at relatively low angles ( 40 ) to the southwest. The focal mechanisms of the largest shocks reveal normal faulting with extension perpendicular to the Apenninic chain (northeast–southwest), consistently with the Quaternary tectonics of the internal sector of the northern Apennine belt and with previous earthquakes in adjacent regions. Three mainshocks occurred on distinct 5- to 10-km-long fault segments, adjacent and slightly offset between each other. High-quality aftershock locations show that seismicity is confined within the sedimentary Mesozoic cover in the upper 8 km of the crust and that most of the aftershocks are shallower than the largest shocks, which nucleated at 6-km depth. Faults evidenced by aftershock locations have a planar geometry and show increased complexity toward the surface. Most of the aftershock focal mechanisms are dominated by normal faulting. Several strike-slip events occurred at shallow depths, reactivating portions of pre-existing thrust planes that segment the normal fault system. The spatiotemporal evolution of seismicity shows a peculiar migration of hypocenters along the strike of the main faults with multiple ruptures and the activation of fault segments before the occurrence of the main rupture episodes.
      332  37