Saraò, Angela
Preferred name
Saraò, Angela
Main Affiliation
ORCID
11 results
Filters
Settings
The search returned 11 results
Now showing 1 - 10 of 11
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Acquiring, archiving, analyzing and exchanging seismic data in real time at the Seismological Research Center of the OGS in Italy
After the 1976 Friuli earthquake (Ms = 6.5) in north-eastern Italy that caused about 1,000 casualties and widespread destruction in the Friuli area, the Italian government established the Centro di Ricerche Sismologiche (CRS). This is now a department of the Istituto Nazionale di Oceanografia e di Geofisica Sperimentale (OGS), and it is specifically devoted to the monitoring of the seismicity of north-eastern Italy. Since its inception, the North-East Italy Seismic Network has grown enormously. Currently, it consists of 14 broad-band and 20 short-period seismic stations, all of which are telemetered to and acquired in real time at the OGS-CRS data center in Udine. Data exchange agreements in place with other Italian, Slovenian, Austrian and Swiss seismological institutes lead to a total number of 94 seismic stations acquired in real time, which confirms that the OGS is the reference institute for seismic monitoring of north-eastern Italy. Since 2002, CRS has been using the Antelope software suite as the main tool for collecting, analyzing, archiving and exchanging seismic data. SeisComP is also used as a real-time data exchange server tool. A customized web accessible server is used to manually relocate earthquakes, and automatic procedures have been set-up for moment-tensor determination, shaking-map computation, web publishing of earthquake parametric data, waveform drumplots, state-of-health parameters, and quality checks of the station by spectra analysis. Scripts for email/SMS/fax alerting to public institutions have also been customized. Recently, a real-time seismology website was designed and set-up (http://rts.crs.inogs.it/).323 341 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Accounting for rupture directivity in ShakeMap
(2010-09-06); ; ; ; The rapid and accurate information about the ground shaking following an earthquake is necessary for emergency response planning. A prompt strategy is contouring the real data recorded at the stations. However only few regions, i.e. Japan and Taiwan, have an instrumental coverage as good as needed to produce shaking maps relying almost entirely on real data. ShakeMap has been conceived in order to “fill” the data gap and producing stable contouring using the ground motion predictive equations (GMPEs) and site effect. Thus for regions where the data coverage is sparse, the interpolation plays a crucial role and the choice of the GMPE can affect strongly the goodness of the ground shaking estimation. However the GMPEs derive from an empirical regression describing the averaged behavior of the ground shaking and tend to mask, when present, specific trends due to multidimensional effects like the asymmetry of the rupture process (directivity effect). Thus, ShakeMaps for large events may not reproduce faithfully the ground motion in the near source if determined without the introduction of rupture related parameters. One way to improve the ShakeMap prediction is to modify the ground motion modeling in order to better explain the ground motion variability. To this purpose, the empirical model can be refined with information about the rupture process (Spagnuolo PhD2010), in this case using the directivity term defined by Spudich and Chiou (Earthquake Spectra 2008). The aim of this work is to quantify the effectiveness of refined GMPEs in improving the performance of ShakeMap. We quantify the agreement of this new GMPE with the real recorded data, and make inference about the reliability of this new ShakeMap. The test is focused on the study of the ShakeMap degradation when the number of the observations is reduced, and on the quantification of the improvements due to the directivity term. In order to conduct properly the test, we investigate two well- recorded events from Japan: the 2008 Iwate-Miyagi (M7) and the 2000 Tottori (M6.6) events. This work is part of the DPC-INGV S3 project (2007-09), as described in the companion abstract Ameri et al. (ESC2010).158 620 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , The dynamics of the 2001 Etna eruption as seen by full moment tensor analysis
(2010-05); ; ; ; Saraò, A.; Istituto Nazionale di Oceanografia e di Geofisica Sperimentale, Centro Richerche Sismologiche, Trieste, Italy.The Mt. Etna eruption of July 2001 was announced by severe seismic activity and by the opening of a 7-km-long zone of densely distributed fractures. The large amount of data collected gave a unique opportunity to study the magma migration process and to infer the position and geometry of the uprising dyke. Results from multidisciplinary approaches suggest that the observed phenomenology was the result of the rapid intrusion of a vertical dyke, oriented roughly N–S and located a few km south of the summit region. To add new constraints to the dynamics of the eruption process, in this study we determine the full seismic moment tensors of 61 earthquakes, selected among those occurring between July 12 and July 18 (Md ≥ 2.2), located in a depth ranging from 1 km above sea level (a.s.l.) to 3 km below sea level (b.s.l.). At the beginning of the seismic swarm, the dominant component of the seismic source tensor is double-couple percentage (around 65 per cent on average) statistical significant at 95 per cent confidence level and in the following hours the non-double-couple components increase at the expenses of the double-couple. Such observations are related well with the system of fractures formed just before the eruption, whereas the increasing non-double-couple components can be explained as the response of the confining rocks to the rising magma and degassing processes. The type of focal mechanisms retrieved are predominantly of normal fault type (44 per cent), strike slip (30 per cent) and thrust mechanisms (9 per cent), and outline a scenario that concurs with the stress regime induced by a dyke injection. The space–time analysis of seismic source locations and source moment tensors (1) confirms the evidence of a vertical dyke emplacement that fed the 2001 lateral eruption and (2) adds new insights to support the hypothesis of the injection of a second aborted dyke, 2 km SE from the fractures zone.379 45 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Ground-motion simulations within ShakeMap methodology: application to the 2008 Iwate-Miyagi Nairiku (Japan) and 1980 Irpinia (Italy) earthquakes
(2013); ; ; ; ShakeMap package uses empirical Ground Motion Prediction Equations (GMPEs) to estimate the ground motion where recorded data are not available. Recorded and estimated values are then interpolated in order to produce a shaking map associated with the seismic event of interest. The ShakeMap approach better works in regions with dense stations coverage, where the observed ground motions adequately constrain the interpolation. In poorly instrumented regions, the ground motion estimate mainly relies on the GMPE, that account only for average characteristics of source and wave propagation processes. In this study we investigated the improvement of ShakeMap in the near fault area when including synthetic estimates. We focus on the 2008, Mw 7.0, Iwate-Miyagi Nairiku (Japan) earthquake as a case study because recorded by a huge number of stations. As first we calculated the shakemaps to be used as reference maps and then removed several subsets of stations from the original data-set, replacing them with: (i) the estimations of the ground motion obtained by using a specific GMPE valid for that area, using simple source information such as the earthquake magnitude and fault geometry; (ii) the peak values from synthetic time-histories computed with a hybrid deterministic-stochastic method for extended fault, using the rupture fault model obtained from the kinematic source inversion of strong-motion records. We evaluate the deviations from the reference map and the sensitivity to the number of sites where recordings are not available. Our results show that shakemaps are more and more reliable as the coverage of stations is dense and uniformly distributed in the near-source area. Moreover, the synthetics account for propagation and source properties in a more correct way than GMPE, and largely improve the results. The hybrid maps reach good fitting levels especially when synthetics are used to integrate real data and for particular strong-motion parameters and stations’ distribution.326 639 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , 2014 state-of-the-art of the OGS Northeastern Italy Seismic Network
(2014-08-24); ; ; ; The Centro di Ricerche Sismologiche (CRS, Seismological Research Centre) of the Istituto Nazionale di Oceanografia e di Geofisica Sperimentale (OGS, Italian National Institute for Oceanography and Experimental Geophysics) in Udine (Italy) after the strong earthquake of magnitude M=6.4 occurred in 1976 in the Italian Friuli-Venezia Giulia region, started to operate the North-eastern Italy Seismic Network: it currently consists of 18 very sensitive broad band and 20 simpler short period seismic stations, most of them equipped also with strong motion accelerometers, all tele-metered to and acquired in real time at the OGS-CRS data centre in Udine. Real time data exchange agreements in place with other Italian, Slovenian, Austrian and Swiss seismological institutes lead to a total number of about 100 seismic stations acquired in real time, which makes the OGS the reference institute for seismic monitoring of North-eastern Italy (Priolo et al., 2005, Bragato et al., 2011, Bragato et al., 2013, Saraò et al., 2010 and Pesaresi et al., 2011). Recent developments in running the OGS Northeastern Italy Seismic Network will be here illustrated.384 249 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Acquiring, archiving, analyzing and exchanging seismic data in real time at the Seismological Research Center of the OGS in Italy
The Centro di Ricerche Sismologiche (CRS, Seismological Research Center) of the Istituto Nazionale di Oceanografia e di Geofisica Sperimentale (OGS, Italian National Institute for Oceanography and Experimental Geophysics) in Udine (Italy) after the strong earthquake (magnitude M=6.4) occurred in 1976 in the Italian Friuli-Venezia Giulia region, started to operate the North-east Italy (NI) seismic network: it currently consists of 11 very sensitive broad band and 23 more simple short period seismic stations, all telemetered to and acquired in real time at the OGS-CRS data center in Udine. Real time data exchange agreements in place with other Italian, Slovenian, Austrian and Swiss seismological institutes lead to a total number of 89 seismic stations acquired in real time, which makes the OGS the reference institute for seismic monitoring of Northeastern Italy. Since 2002 OGS-CRS is using the Antelope software suite as the main tool for collecting, analyzing, archiving and exchanging seismic data in the framework of the EU Interreg IIIA project “Trans-national seismological networks in the South-Eastern Alps”. SeisComP is also used as a real time data exchange server tool. At OGS-CRS we then adapted existing programs and created new ones like: a customized web-accessible server to manually relocate earthquakes, a script for automatic moment tensor determination, scripts for web publishing of earthquake parametric data, waveforms, state of health parameters and shaking maps, noise characterization by means of automatic spectra analysis, plus scripts for email/SMS/fax alerting. A new OGS-CRS real time web site has also been recently designed and made operative in the framework of the DPC-INGV S3 Project.155 541 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Acquiring, archiving, analyzing and exchanging seismic data in real time at the Seismological Research Center of the OG S in Italy: an updated view
The Centro di Ricerche Sismologiche (CRS, Seismological Research Center) of the Istituto Nazionale di Oceanografia e di Geofisica Sperimentale (OGS, Italian National Institute for Oceanography and Experimental Geophysics) in Udine (Italy) after the strong earthquake (magnitude M=6.4) occurred in 1976 in the Italian Friuli-Venezia Giulia region, started to operate the North-east Italy (NI) seismic network: it currently consists of 11 very sensitive broad band and 22 more simple short period seismic stations, all telemetered to and acquired in real time at the OGS-CRS data center in Udine. Real time data exchange agreements in place with other Italian, Slovenian, Austrian and Swiss seismological institutes lead to a total number of 90 seismic stations acquired in real time, which makes the OGS the reference institute for seismic monitoring of Northeastern Italy. Since 2002 OGS-CRS is using the Antelope software suite as the main tool for collecting, analyzing, archiving and exchanging seismic data in the framework of the EU Interreg IIIA project “ Trans-national seismological networks in the South-Eastern Alps”. SeisComP is also used as a real time data exchange server tool. At OGS-CRS we then adapted existing programs and created new ones like: a customized web-accessible server to manually relocate earthquakes, a script for automatic moment tensor determination, scripts for web publishing of earthquake parametric data, waveforms, state of health parameters and shaking maps, noise characterization by means of automatic spectra analysis, plus scripts for mail/SMS/fax alerting. A new OGS-CRS real time web site has also been recently designed and made operative in the framework of the Italian P C-INGV S3 P roject.162 496 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Project S3: Fast evaluation of parameters and effects of strong earthquakes in Italy and in the Mediterranean: Deliverable 4.3 -Report on the simulation of synthetic seismograms at bedrock
(2010-06); ;Cirella, G.; ; ShakeMap package uses empirical ground motion prediction equations (GMPEs) to estimate the ground motion where recorded data are not available. Recorded and estimated values are then interpolated in order to produce a shaking map associated to the considered event. Anyway GMPEs account only for average characteristics of source and wave propagation processes. Within the framework of the DPC-INGV S3 project (2007-09), we evaluate whether the inclusion of directivity effects in GMPEs or the use of synthetic seismograms from finite-fault rupture models may improve the ShakeMap evaluation. An advantage of using simulated motions from kinematic rupture models is that source effects, as rupture directivity, are directly included in the synthetics. This is particularly interesting in Italy where the regional GMPEs, based on a few number of near-source records for moderate-to-large earthquakes, are not reliable for estimating ground motion in the vicinity of the source. In this work we investigated how and if the synthetic seismograms generated with finite-fault models can be used in place of (or in addition to) GMPEs within the ShakeMap methodology. We assumed a description of the rupture model with gradually increasing details, from a simple point source to a kinematic rupture history obtained from inversion of strong-motion data. According to the available information synthetic seismograms are calculated with methods that account for the different degree of approximation in source properties. We chose the 2008 Iwate-Miyagi (Japan) earthquake as a case study. This earthquake has been recorded by a very large number of stations and the corresponding ShakeMap relies almost totally on the recorded ground motions. Starting from this ideal case, we removed a number of stations in order to evaluate the deviations from the reference map and the sensitivity of the map to the number of stations used. The removed data are then substituted with synthetic values calculated assuming different source approximations, and the resulting maps are compared to the original ones (containing observed data only). The use of synthetic seismograms computed for finite-fault rupture models produces, in general, an improvement of the calculated ShakeMaps, especially when synthetics are used to integrate real data. When real data are not available and ShakeMap is estimated using GMPEs only, the improvement adding simulated values depends on the considered strong-motion parameters.156 310 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Testing the improvement of ShakeMaps using f inite-f ault models and synthetic seismograms
(2010-09-06); ; ; ; ShakeMap package uses empirical ground motion prediction equations (GM PEs) to estimate the ground motion where recorded data are not available. Recorded and estimated values are then interpolated in order to produce a shaking map associated to the considered event. Anyway GMPEs account only for average characteristics of source and wave propagation processes. Within the framework of the DPC-INGV S3 project (2007-09), we evaluate whether the inclusion of directivity effects in GMPEs (companion paper Spagnuolo et al., 2010) or the use of synthetic seismograms from finite-fault rupture models may improve the ShakeMap evaluation. An advantage of using simulated motions from kinematic rupture models is that source effects, as rupture directivity, are directly included in the synthetics. This is particularly interesting in Italy where the regional GMPEs, based on a few number of near-source records for moderate-to-large earthquakes, are not reliable for estimating ground motion in the vicinity of the source. In this work we investigated how and if the synthetic seismograms generated with finite-fault models can be used in place of (or in addition to) GMPEs within the ShakeMap methodology. We assumed a description of the rupture model with gradually increasing details, from a simple point source to a kinematic rupture history obtained from inversion of strong-motion data. According to the available information synthetic seismograms are calculated with methods that account for the different degree of approximation in source properties. We chose the M w 6.9 2008 Iwate-M iyagi (Japan) earthquake as a case study. This earthquake has been recorded by a very large number of stations and the corresponding ShakeMap relies almost totally on the recorded ground motions. Starting from this ideal case, we removed a number of stations in order to evaluate the deviations from the reference map and the sensitivity of the map to the number of stations used. The removed data are then substituted with synthetic values calculated assuming different source approximations, and the resulting maps are compared to the original ones (containing observed data only). The use of synthetic seismograms computed for finite-fault rupture models produces, in general, an improvement of the calculated ShakeMaps, especially when synthetics are used to integrate real data. When real data are not available and ShakeMap is estimated using GMPEs only, the improvement adding simulated values depends on the considered strong-motion parameters.155 208 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Improving the seismic monitoring of North-eastern Italy: the state of the art of the North-eastern Italy (NI) Seismic Network run by OGS
The Centro di Ricerche Sismologiche (CRS, Seismological Research Center) of the Istituto Nazionale di Oceanografia e di Geofisica Sperimentale (OGS, Italian National Institute for Oceanography and Experimental Geophysics) in Udine (Italy) after the strong earthquake of magnitude Mw=6.4 occurred in 1976 in the Italian Friuli-Venezia Giulia region, started to operate the North-eastern Italy (NI) Seismic Network: it currently consists of 12 very sensitive broad band and 21 simpler short period seismic stations, all telemetered to and acquired in real time at the OGS-CRS data center in Udine. Real time data exchange agreements in place with other Italian, Slovenian, Austrian and Swiss seismological institutes lead to a total number of 93 seismic stations acquired in real time, which makes the OGS the reference institute for seismic monitoring of North-eastern Italy. Since 2002 OGS-CRS is using the Antelope software suite on a SUN SPARC cluster as the main tool for collecting, analyzing, archiving and exchanging seismic data, initially in the framework of the EU Interreg IIIA project “Trans-national seismological networks in the South-Eastern Alps”. SeisComP is also used as a real time data exchange server tool. In order to improve the seismological monitoring of the North-eastern Italy area, at OGS-CRS we tuned existing programs and created ad hoc ones like: a customized web server named PickServer to manually relocate earthquakes, a script for automatic moment tensor determination, scripts for web publishing of earthquake parametric data, waveforms, state of health parameters and shaking maps, noise characterization by means of automatic spectra analysis, and last but not least scripts for email/SMS/fax alerting. A new OGS-CRS real time seismological website (http://rts.crs.inogs.it/) has also been operative since more than one year in the framework of the Italian DPC-INGV S3 Project: the website shows classic earthquake locations parametric data plus shakemap and moment tensor information; recently also daily PSD quality check of seismic stations plots have been added. At OGS-CRS we also spent a considerable amount of efforts in improving the long-period performances of broadband seismic stations, either by carrying out full re-installations and/or applying thermal insulations to the seismometers: the example of the new PRED broad band seismic station installation in the cave tunnel of Cave del Predil using a Quanterra Q330HR high resolution digitizer and a Sterckeisen STS-2 broadband seismometer will be illustrated. Efforts have been put also in strengthening the reliability of data links, exploring the use of redundant satellite/radio/GPRS links.134 119
