Skip to main content
The search returned 108 results
Now showing 1 - 10 of 108
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Induced polarization of volcanic rocks. 3. Imaging clay cap properties in geothermal fields

    Smectite-rich clay caps form permeability seals in geothermal systems. The presence of smectite is also responsible for a strong surface (interfacial) electrical conductivity and polarization due to their electrical double layer properties. We developed new complex conductivity models using both differential effective medium (DEM) and volume averaging theories accounting for both conduction and polarization of these high cation exchange capacity (CEC) materials. These models predict that the chargeability is also a non-linear function of the pore water conductivity reaching a constant value at pore water conductivity far above the so-called iso-conductivity point. The iso-conductivity point is characterized by the equality between the conductivity of the rock and the conductivity of the pore water. We apply the DEM conductivity model (which requires only two textural parameters) to smectite-rich volcanic and sedimentary rocks using data sets from the literature. When smectite is present in the volcanic rocks, the CEC of the rock is dominated by the CEC of smectite. The grain conductivity and the normalized chargeability are related to each other by a dimensionless number R = 0.10 (independent of temperature and saturation) and both are controlled by the excess of charge per unit pore volume QV, which can be determined from the CEC and porosity. Our petrophysical model is also able to predict the permeability of the rock as well from the CEC and the porosity. It is applied to a 3-D data set at Krafla volcano (Iceland). The porosity, the CEC, the percentage of smectite, and the permeability of the clay-cap are imaged by 3-D induced polarization tomography. Electrical conductivity tomography alone does not allow separation of the contribution of the bulk pore space from the interfacial properties related to alteration and therefore should be used with caution.
      222  84
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Hazardous gas blowouts from shallow wells in the Colli Albani

    The Colli Albani volcanic area is affected by huge degassing of likely magmatic or mantle origin, as suggested by the gas He isotopic composition. Gas rising from a buried calcareous aquifer generates several surface emissions and accumulates also in permeable layers at various depths, from 10 to 350 m, beneath impervious formations. When reached by wells, these pressurized gas pockets cause hazardous blowouts of CO2 and H2S, often in inhabited zone. Remedy requires the restoration of the drilled cap by cement injections, whose effectiveness can be conveniently assessed by monitoring both CO2 soil diffuse flux and CO2 and H2S air concentration.
      259  41
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Hydrothermal system of Central Tenerife Volcanic Complex, Canary Islands (Spain), inferred from self-potential measurements.

    An extensive self-potential survey was carried out in the central volcanic complex of Tenerife Island (Canary Islands, Spain). A total amount of ~237 kmof profileswith 20 mspacing betweenmeasurementswas completed, including radial profiles extending from the summits of Teide and Pico Viejo, and circular profiles inside and around Las Cañadas caldera and the northern slopes of Teide and Pico Viejo. One of themain results of this mapping is the detection ofwell-developed hydrothermal systemswithin the edifices of Teide and Pico Viejo, and also associated with the flank satellite M. Blanca and M. Rajada volcanoes. A strong structural control of the surface manifestation of these hydrothermal systems is deduced from the data, pointing to the subdivision of Teide and Pico Viejo hydrothermal systems in three zones: summit crater, upper and lower hydrothermal systems. Self-potential maxima related to hydrothermal activity are absent from the proximal parts of the NE and NW rift zones as well as from at least two of the mafic historical eruptions (Chinyero and Siete Fuentes), indicating that long-lived hydrothermal systems have developed exclusively over relatively shallow felsic magma reservoirs. Towards Las Cañadas caldera floor and walls, the influence of the central hydrothermal systems disappears and the self-potential signal is controlled by the topography, the distance to thewater table of Las Cañadas aquifer and its geometry. Nevertheless, fossil or remanent hydrothermal activity at some points along the Caldera wall, especially around the Roques de García area, is also suggested by the data. Self-potential data indicate the existence of independent groundwater systems in the three calderas of Ucanca, Guajara and Diego Hernández, with a funnel shaped negative anomaly in the Diego Hernández caldera floor related to the subsurface topography of the caldera bottom. Two other important self-potential features are detected: positive values towards the northwestern Santiago rift, possibly due to the relatively high altitude of the water-table in this area; and a linear set ofminima to thewest of Pico Viejo, aligned with the northwestern rift and related to meteoricwater infiltration along its fracture system.
      366  75
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Volcanic Vortex Rings: Axial Dynamics, Acoustic Features, and Their Link to Vent Diameter and Supersonic Jet Flow

    By injecting a mixture of gas and pyroclasts into the atmosphere, explosive volcanic eruptions frequently generate vortex rings, which are toroidal vortices formed by the jet's initial momentum. Here, we report high-speed imaging and acoustic measurements of vortex rings sourcing from gas-rich eruptive jets at Stromboli volcano (Italy). Volcanic vortex rings (VVRs) form at the vent together with an initial compression acoustic wave, VVRs maximum rise velocity being directly proportional to the amplitude and inversely proportional to the duration of the compression wave. The axial rise and acoustic signature of VVRs match well those predicted by recent fluid-dynamic experiments. This good match allows using the high-frequency (80-1,000 Hz) component of the jet sound and the time-dependent rise of VVRs to retrieve two key eruption parameters: the Mach number of the eruptive jets (<1.5) and vent diameter (∼0.7 m), respectively, the latter being confirmed independently by direct Uncrewed Aerial Vehicle observations.
      520  173
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Il terremoto di Fleri (Etna) del 26 dicembre 2018 Mw 4.9. Parte II: rilievo degli effetti di fagliazione cosismica superficiale

    Il terremoto del 26 dicembre 2019, ore 02:19 UTC, che ha colpito il basso versante sud-orientale dell’Etna, ha prodotto non solo danni gravi e distruzioni nell’area epicentrale, pari al grado 8 EMS (Azzaro et al., in questo volume), ma anche vistose rotture superficiali lungo la faglia di Fiandaca, che è la struttura più meridionale del sistema tettonico delle Timpe (Fig. 1a). Gli effetti di fagliazione cosismica in area etnea sono storicamente piuttosto frequenti in occasione di terremoti superficiali (< 2-3 km), anche per valori di magnitudo relativamente modesti (M ≥ 3.5, vedi Azzaro, 1999). Con una magnitudo Mw 4.9 (Regional Centroid Moment Tensors, https://doi.org/10.13127/rcmt/italy), il terremoto in questione rappresenta l’evento più significativo, in termini di entità e complessità della fagliazione associata, verificatosi nell’area etnea negli ultimi 70 anni, con una estensione della rottura superiore rispetto a quelle storiche (< 6.5 km). Il gruppo di emergenza per il rilievo degli effetti geologici cosismici EMERGEO (http://emergeo.ingv.it) dell’INGV, si è pertanto attivato effettuando quattro campagne di misura con squadre che si sono alternate sul terreno (per un totale di 60 gg/persona), supportate da personale del proprio Centro Operativo per l’organizzazione dei dati e il popolamento del database (43 gg/persona). Il rilievo ha consentito la raccolta e catalogazione di circa 900 punti di misura relativi a posizionamento, geometria, rigetto e cinematica delle fratture cosismiche.
      241  254
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Surface ruptures database related to the 26 December 2018, MW 4.9 Mt. Etna earthquake, southern Italy

    We provide a database of the surface ruptures produced by the 26 December 2018 Mw 4.9 earthquake that struck the eastern flank of Mt. Etna volcano in Sicily (southern Italy). Despite its relatively small magnitude, this shallow earthquake caused about 8 km of surface faulting, along the trace of the NNW-trending active Fiandaca Fault. Detailed field surveys have been performed in the epicentral area to map the ruptures and to characterize their kinematics. The surface ruptures show a dominant right-oblique sense of displacement with an average slip of about 0.09 m and a maximum value of 0.35 m. We have parsed and organized all observations in a concise database, with 932 homogeneous georeferenced records. The Fiandaca Fault is part of the complex active Timpe faults system affecting the eastern flank of Etna, and its seismic history indicates a prominent surface-faulting potential. Therefore, this database is essential for unravelling the seismotectonics of shallow earthquakes in volcanic areas, and contributes updating empirical scaling regressions that relate magnitude and extent of surface faulting.
      4586  96
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Il Monitoraggio dei Vulcani Campani - Secondo semestre 2019

    L'Istituto Nazionale di Geofisica e Vulcanologia (INGV) è componente del Servizio Nazionale di Protezione Civile, ex articolo 6 della legge 24 febbraio 1992 n. 225 ed è Centro di Competenza per i fenomeni sismici, vulcanici e i maremoti per il Dipartimento della Protezione Civile Nazionale (DPC). L’Osservatorio Vesuviano, Sezione di Napoli dell’INGV, ha nei suoi compiti il monitoraggio e la sorveglianza H24/7 delle aree vulcaniche attive campane (Vesuvio, Campi Flegrei e Ischia). Tali attività sono disciplinate dall’Accordo-Quadro (AQ) sottoscritto tra il DPC e l’INGV per il decennio 2012-2021 e sono dettagliate negli Allegati A e B del suddetto AQ. Il presente Rapporto sul Monitoraggio dei Vulcani Campani rappresenta l’attività svolta dall’Osservatorio Vesuviano e dalle altre Sezioni INGV impegnate nel monitoraggio dell’area vulcanica campana nel secondo semestre 2019.
      574  460
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Methane seepage dynamics and ground heating phenomena in the southern Po Valley: the case study of Santa Maria Nuova (Italy)

    (Oxford: Elsevier Ltd., 2025-09-10)
    Capelli Ghioldi, G
    ;
    ; ; ;
    Natural reservoirs that release CH 4 can substantially increase atmospheric greenhouse gas levels, posing environmental and safety risks. Degassing phenomena in the Emilia-Romagna region (Italy) have been documented across a variety of fluids and reservoir types, with a focus on their origin and evolution. This study combines ground measurements and satellite data analysis to explore the relationships between CH 4 seepage, thermal anomalies, and vegetation stress at the Santa Maria Nuova (SMN) site in southern Po Valley. The explosion of a CH 4-saturated water well in July 2021 prompted a two-year investigation in the adjacent cultivated field (1.5 ha), revealing significant spatial and temporal variations in diffuse CH 4 fluxes (ranging from 0 to 917 g m − 2 d − 1) and corresponding CO 2 fluxes (1.9-466 g m − 2 d − 1). Soil temperature measurements and thermal imaging identified localised ground heating, attributed to methanotrophic exothermic oxidation of CH 4 to CO 2. These hotspots correspond to areas of visibly stressed vegetation, marked by reduced vitality and barren areas. Satellite-derived Ratio Vegetation Index (RVI) data confirmed persistent vegetation stress over the anomaly site from 2017 to 2024. Geochemical analysis of soil gases indicated a primarily biogenic origin of CH 4 , supported by isotopic signatures (δ 13 C-CH 4 values < − 60 ‰ V-PDB) and the presence of shallow Pleistocene carbonate deposits beneath the site, which can generate CH 4 seepage. These findings demonstrate the utility of integrating ground-based and remote sensing techniques for monitoring CH 4 seepage and its environmental impacts.
      12  32
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Sutures in mafic pyroclasts

    (Berlin; Heidelberg; New York N.Y.: Springer, 2026-03-29) ; ; ; ;
    Micrometer-scale Fe (iron)-rich filaments are common in mafic pyroclasts, yet their origin remains debated. These filaments have been variably interpreted as sutured fractures in magma, the product of magma mingling, compositional boundary layers detached from plagioclase crystals, or oxide shells stripped from bubbles. Here, we compare new observations from several case studies with previous results, concluding that shared features point to a common origin of filaments in all eruptions. Key shared features of filaments are as follows: (1) Fe, Mg, and Ca enrichment; (2) variable degree of contortion, sharpness, and Fe oxide microlite content; (3) inclusion of small vesicles and microlite fragments; (4) transition into cracks and broken crystals; (5) connection to sharp concavities of vesicles and pyroclast edges; and (6) separation of regions within pyroclasts with distinct textures. Focused Ion Beam, micron-sized trenches cut perpendicular to the polished section, and X-ray computed microtomography images reveal that the two-dimensional filaments are complex three-dimensional surfaces resulting from magma suturing. These sutures form by fusing of molten, Fe-enriched surfaces, whether exposed crack surfaces within pyroclasts, the surfaces of colliding pyroclasts, or the surfaces of different portions of the same pyroclast folded over itself. During fusing, sutures entrap voids and crystal fragments present on the surfaces. After fusing, sutures evolve by diffusion, crystallization, and viscous deformation. Sutures witness the complex thermal and deformation history of pyroclasts during and after magma fragmentation and act as unique telltales of otherwise invisible processes that affect pyroclast final size, chemical composition, and vesicle and crystal size distributions.
      6  12
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Adventive hydrothermal circulation on Stromboli volcano (Aeolian Islands, Italy) revealed by geophysical and geochemical approaches: Implications for general fluid flow models on volcanoes

    On March 15th 2007 a paroxysmal explosion occurred at the Stromboli volcano. This event generated a large amount of products,mostly lithic blocks, someofwhich impacted the ground as far as down to 200 m a.s.l., about 1.5 kmfaraway fromthe active vents. Two days after the explosion, a newvapouremissionwas discovered on the north-eastern flank of the volcanic edifice, at 560 m a.s.l., just above the area called “Nel Cannestrà”. This new vapour emission was due to a block impact. In order to investigate the block impact area to understand the appearance of the vapour emission, we conducted on May 2008 a multidisciplinary study involving Electrical Resistivity Tomography (ERT), Ground Penetrating Radar (GPR), Self-Potential (SP), CO2 soil diffuse degassing and soil temperature surveys. This complementary data set revealed the presence of an anomalous conductive body, probably related to a shallow hydrothermal level, at about 10–15 m depth, more or less parallel to the topography. It is the first time that such a hydrothermal fluid flow,with a temperature close to thewater boiling point (76 °C) has been evidenced at Stromboli at this low elevation on the flank of the edifice. The ERT results suggest a possible link between (1) the main central hydrothermal system of Stromboli, located just above the plumbing system feeding the active vents, with a maximum of subsurface soil temperature close to 90 °C and limited by the NeoStromboli summit crater boundary and (2) the investigated area of Nel Cannestrà, at ~500 m a.s.l., a buried eruptive fissure active 9 ka ago. In parallel, SP and CO2 soil diffuse degassingmeasurements suggest in this sector at slightly lower elevation fromthe block impact crater a magmatic and hydrothermal fluid rising system along the N41° regional fault. A complementary ERT profile, on May 2009, carried out from the NeoStromboli crater boundary downto the block impact crater displayed a flank fluid flowapparently connected to a deeper system. The concept of shallow hydrothermal level have been compared to similar ERT results recently obtained onMount Etna and La Fossa cone of Vulcano. This information needs to be taken into account in general fluid flow models on volcanoes. In particular, peripheral thermal waters (as those bordering the northeastern coast of Stromboli) could be contaminated by hydrothermal and magmatic fluids coming from regional faults but also from the summit.
      540  30