Norini, Gianluca
Preferred name
Norini, Gianluca
12 results
Filters
Settings
The search returned 12 results
Now showing 1 - 10 of 12
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Land subsidence, Ground Fissures and Buried Faults: InSAR Monitoring of Ciudad Guzmán (Jalisco, Mexico)
(2015-07-07); ; ; ; We study land subsidence processes and the associated ground fissuring, affecting an active graben filled by thick unconsolidated deposits by means of InSAR techniques and fieldwork. On 21 September 2012, Ciudad Guzmán (Jalisco, Mexico) was struck by ground fissures of about 1.5 km of length, causing the deformation of the roads and the propagation of fissures in adjacent buildings. The field survey showed that fissures alignment is coincident with the escarpments produced on 19 September 1985, when a strong earthquake with magnitude 8.1 struck central Mexico. In order to detect and map the spatio-temporal features of the processes that led to the 2012 ground fissures, we applied InSAR multitemporal techniques to process ENVISAT-ASAR and RADARSAT-2 satellite SAR images acquired between 2003 and 2012. We detect up to 20 mm/year of subsidence of the northwestern part of Ciudad Guzmán. These incremental movements are consistent with the ground fissures observed in 2012. Based on interferometric results, field data and 2D numerical model, we suggest that ground deformations and fissuring are due to the presence of areal subsidence correlated with variable sediment thickness and differential compaction, partly driven by the exploitation of the aquifers and controlled by the distribution and position of buried faults.463 660 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Valle del Bove, Eastern Flank of Etna Volcano: a Comprehensive Model for the Opening of the Depression and Implications for Future Hazards
(2004-04); ; ; ; Calvari, S.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Catania, Catania, ItaliaIn this paper we integrate stratigraphic and sedimentological analyses of the volcaniclastic deposits, emplaced during initial opening and later widening of the Valle del Bove depression, with the available stratigraphy of the inner walls, and marine offshore data, structural data, and magnetic surveys to develop a comprehensive model for the opening of the Valle del Bove depression. The resulting model adds new insight into the triggering mechanisms of the flank collapse. Additionally, it suggests a three-stage evolution of the eastern flank of Etna. (1) About 10 Kyr ago, the extinct Ellittico volcano (60 80 (per uniformità anche con Acireale) to 15 Kyr) collapsed, forming the early Valle del Bove. The collapse produced an avalanche deposit that spread ESE and formed the base of the Milo Lahar and the Chiancone deposits. (2) The second stage involved instability-related minor collapses within the valley, causing southward and westward enlargement of the depression and the emplacement of the debris flow sequence that comprises the upper part of the Milo Lahar deposit. (3) Available debris that accumulated within the Valle del Bove from smaller subsequent collapses was deposited at the mouth of the Valle del Bove in the fluvial sequence that forms most of the exposed part of the Chiancone deposit. The emplacement of the whole volcaniclastic sequence occurred between 10 and 2 Kyr ago. Since then, the Valle del Bove has acted as a basin protecting the lower eastern flank of Etna from lava flows or inundations of volcaniclastic debris.329 540 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Geological Map of the Tocomar Basin (Puna Plateau, NW Argentina). Implication for the Geothermal System Investigation
This paper presents a detailed geological map at the 1:20,000 scale of the Tocomar basin in the Central Puna (north-western Argentina), which extends over an area of about 80 km2 and displays the spatial distribution of the Quaternary deposits and the structures that cover the Ordovician basement and the Tertiary sedimentary and volcanic units. The new dataset includes litho-facies descriptions, stratigraphic and structural data and new 234U/230Th ages for travertine rocks. The new reconstructed stratigraphic framework, along with the structural analysis, has revealed the complex evolution of a small extensional basin including a period of prolonged volcanic activity with different eruptive centres and styles. The geological map improves the knowledge of the geology of the Tocomar basin and the local interplay between orogen-parallel thrusts and orogen-oblique fault systems. This contribution represents a fundamental support for in depth research and also for encouraging geothermal exploration and exploitation in the Puna Plateau region.267 114 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Improving the Accuracy of Digital Terrain Models Using Drone-Based LiDAR for the Morpho-Structural Analysis of Active Calderas: The Case of Ischia Island, Italy
Over the past two decades, the airborne Light Detection and Ranging (LiDAR) system has become a useful tool for acquiring high-resolution topographic data, especially in active tectonics studies. Analyzing Digital Terrain Models (DTMs) from LiDAR exposes morpho-structural elements, aiding in the understanding of fault zones, among other applications. Despite its effectiveness, challenges persist in regions with rapid deformation, dense vegetation, and human impact. We propose an adapted workflow transitioning from the conventional airborne LiDAR system to the usage of drone-based LiDAR technology for higher-resolution data acquisition. Additionally, drones offer a more cost-effective solution, both in an initial investment and ongoing operational expenses. Our goal is to demonstrate how drone-based LiDAR enhances the identification of active deformation features, particularly for earthquake-induced surface faulting. To evaluate the potential of our technique, we conducted a drone-based LiDAR survey in the Casamicciola Terme area, north of Ischia Island, Italy, known for the occurrence of destructive shallow earthquakes, including the 2017 Md = 4 event. We assessed the quality of our acquired DTM by comparing it with existing elevation datasets for the same area. We discuss the advantages and limitations of each DTM product in relation to our results, particularly when applied to fault mapping. By analyzing derivative DTM products, we identified the fault scarps within the Casamicciola Holocene Graben (CHG) and mapped its structural geometry in detail. The analysis of both linear and areal geomorphic features allowed us to identify the primary factors influencing the current morphological arrangement of the CHG area. Our detailed map depicts a nested graben formed by two main structures (the Maio and Sentinella faults) and minor internal faults (the Purgatorio and Nizzola faults). High-resolution DEMs acquired by drone-based LiDAR facilitated detailed studies of the geomorphology and fault activity. A similar approach can be applied in regions where the evidence of high slip-rate faults is difficult to identify due to vegetation cover and inaccessibility.60 66 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , The 16 November 2006 flank collapse of the south-east crater at Mount Etna, Italy: Study of the deposit and hazard assessment
(2009-02-11); ; ; ; On 16 November 2006 a flank collapse affected the unstable eastern slope of the South-East Crater (SEC) of Mount Etna. The collapse occurred during one of the paroxysmal events with sustained strombolian activity that characterized the August–December 2006 eruption and was triggered by erosion of loose, hydrothermally altered material of the steep south-east sector of SEC from the outpour of lava. The collapse produced a debris avalanche that involved both lithic and juvenile material and resulted in a deposit emplaced on the eastern flank of the volcano up to 1.2 km away from the source. The total volume of the deposit was estimated to be in the order of 330,000–413,000 m3. The reconstruction of the collapse event was simulated using TITAN2D software designed to model granular avalanches and landslides. This approach can be used to estimate areas that may be affected by similar collapse events in the future. The area affected by the 16 November 2006 lateral collapse of SEC was a small portion of the Mount Etna summit area, but the fact that no one was killed or injured should be considered fortuitous. The summit and adjacent areas of the volcano, in fact, are usually visited by many tourists who are not prepared to face this type of danger. The 16 November 2006 collapse points to the need to be prepared for similar events through scientific investigation (analysis of flank instability, numerical simulation of flows) and development of specific civil protection plans.395 21 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Reconstruction of the eruptive activity on the NE sector of Stromboli volcano: timing of flank eruptions since 15 ka
(2011-01); ; ; ; A multidisciplinary geological and compositional investigation allowed us to reconstruct the occurrence of flank eruptions on the lower NE flank of Stromboli volcano since 15 ka. The oldest flank eruption recognised is Roisa, which occurred at ~15 ka during the Vancori period, and has transitional compositional characteristics between the Vancori and Neostromboli phases. Roisa was followed by the San Vincenzo eruption that took place at ~12 ka during the early stage of Neostromboli period. The eruptive fissure of San Vincenzo gave rise to a large scoria cone located below the village of Stromboli, and generated a lava flow, most of which lies below sea level. Most of the flank eruptions outside the barren Sciara del Fuoco occurred in a short time, between ~9 and 7 ka during the Neostromboli period, when six eruptive events produced scoria cones, spatter ramparts and lava flows. The Neostromboli products belong to a potassic series (KS), and cluster in two differently evolved groups. After an eruptive pause of ~5,000 years, the most recent flank eruption involving the NE sector of the island occurred during the Recent Stromboli period with the formation of the large, highly K calc-alkaline lava flow field, named San Bartolo. The trend of eruptive fissures since 15 ka ranges from N30°E to N55° E, and corresponds to the magma intrusions radiating from the main feeding system of the volcano.541 27 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Tectonic, volcanic and human activity: ground deformation signals detected by multitemporal InSAR techniques in the Colima Volcanic Complex rift (Mexico
The evolution of volcanoes is strictly related with their substratum and the regional tectonics. The link among morphology, geology and structure of volcanic edifices and the geologicalstructural characteristics of the basement is important to understand hazardous phenomena as flank eruptions and lateral collapses of volcanoes. The Colima Rift is an active regional structure, N-S oriented and more than 100 km long and 10 wide. This rift is filled by a ~1 km-thick sequence of quaternary lacustrine sediments, alluvium, and colluvium, mostly underling the about 3000 m thick volcanic pile of the Colima Volcanic Complex (CVC). In addition to the regional structures curved faults, roughly E-W oriented, are observed on the CVC edifice due to the spreading of the volcano moving southward on the weak basement. So in the CVC edifice and surrounding area we can observe the interaction of regional structures and volcanic ones due to the gravitational loading of the volcanic edifice on the weak substratum of the graben. To measure displacements due to magma movement at depth and interaction of regional structures and volcanic ones, SAR interferometry has proven to be a reliable method; however, andesitic stratovolcanoes like the CVC indeed,remain difficult to survey using this technique. The main causes are their specific geometry (steep topography), which induces strong tropospheric artefacts, environmental conditions (e.g.,mainly vegetation, ash and/or snow cover), leading to a loss of coherency. In this work we try to detect deformations phenomena for the wide CVC using a robust multitemporal InSAR approach Differential Synthetic Aperture Radar Interferometry (DInSAR). We apply the Hooper (2008) DInSAR algorithm (StamPS/MTI) both to ENVISAT ASARr images acquired from 1993 to 2007 and to ALOS PALSAR (datasets from 2006 to 2010) in order to determine the deformation patterns in the CVC.346 913 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Preliminary Data on the Structure and Potential of the Tocomar Geothermal Field (Puna Plateau, Argentina)
(2016); ; ; ; This study presents new stratigraphic, structural and hydrogeological data on the Tocomar geothermal volcanic area (Puna plateau, Central Andes, NW Argentina), together with preliminary geochemical and magnetotelluric data. The main geothermal reservoir is located within the fractured Pre-Palaeozoic–Ordovician units. The reservoir is recharged by meteoric waters. Geothermal fluids upwell where main regional structures intersect secondary structures associated with the development of the Tocomar basin. Preliminary data indicate a reservoir temperature of ~ 200 °C and a local geothermal gradient of ~ 130°C/km associated with the Quaternary volcanic activity in the Tocomar area.317 5 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , An overview of experimental models to understand a complex volcanic instability: Application to Mount Etna, Italy
(2013); ; ; ;Acocella, V.; Dipartimento di Scienze Geologiche, Università Roma tre, Roma, ItalyNeri, M.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Catania, Catania, ItaliaVolcanic edifices are often unable to support their own load, triggering the instability of their flanks. Many analogue models have been aimed, especially in the last decade, at understanding the processes leading to volcano flank instability; general behaviors were defined and the experimental results were compared to nature. However, available data at well-studied unstable volcanoes may allow a deeper understanding of the specific processes leading to instability, providing insights also at the local scale. Etna (Italy) constitutes a suitable example for such a possibility, because of its well-monitored flank instability, for which different triggering factors have been proposed in the last two decades. Among these factors, recent InSAR data highlight the role played by magmatic intrusions and a weak basement, under a differential unbuttressing at the volcano base. This study considers original and recently published experimental data to test these factors possibly responsible for flank instability, with the final aim to better understand and summarize the conditions leading to flank instability at Etna. In particular, we simulate the following processes: a) the longterm activity of a lithospheric boundary, as the Malta Escarpment, separating the Ionian oceanic lithosphere from the continental Sicilian lithosphere, below the most unstable east flank of the volcano; b) spreading due to a weak basement, with different boundary conditions; c) the pressurization of a magmatic reservoir, as that active during the 1994–2001 inflation period; d) dike emplacement, as observed during the major 2001 and 2002–2003 eruptions. The experimental results suggest that: 1) the long-term activity of a lithospheric tectonic boundary may create a topographic slope which provides a differential buttressing at the volcano base, a preparing factor to drive longer-term (>105 years) instability on the east flank of the volcano; 2) volcano spreading (b104 years) has limited effect on flank instability at Etna; 3) magmatic intrusions (b101 years), both in the form of Mogi-like sources or dikes, provide the most important conditions to trigger flank instability on the shorter-term.334 27 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Analysing stress field conditions of the Colima Volcanic Complex (Mexico) by integrating finite-element modelling (FEM) simulations and geological data
In the last decades numerical methods have become very popular tools in volcanological studies, since capable of considering many relevant parameters in their calculations, such as the presence of multiple reservoirs, topography, and heterogeneous distribution of the host rock mechanical properties. Although the widespread availability of geodetic data is keep growing, the influence of geological data on the numerical simulations is still poorly considered. In this work a 2D Finite Element Modelling is provided by using the commercial Linear Static Analysis (LISA) software, in order to investigate the stress field conditions occurring around the Colima Volcanic Complex (CVC, Mexico) at increasing the details of geological and geophysical input data. By integrating the published geophysical, volcanological and petrological data, we provide a first-order domain of the CVC feeding system, considering either one or two magma chambers connected to the surface via dykes or isolated (not connected) in the elastic host rocks. We test the methodology by using a gravitational modelling with different geometrical configurations and constraints (i.e. magma chamber dimensions, depth, overpressure). Our results suggest that an appropriate set of geological data is of pivotal importance for improving the mesh generation procedures and the degree of accuracy of numerical outputs, aimed to more reliable physics-based representations of the natural systems.173 111
