Fuoco, Ilaria
Preferred name
Fuoco, Ilaria
ORCID
The search returned 5 results
Now showing 1 - 5 of 5
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The geothermal resources of Vulcano Island (Aeolian archipelago, Italy)
(Oxford UK: Elsevier Science Limited, 2025-05-31); ; ;Russo, L; We evaluated the geothermal resources of Vulcano Island considering the available geological, geochemical, and geophysical information in the framework of the conceptual model of La Fossa magmatic-geothermal system. Having ascertained that the shallow groundwaters of the Vulcano Porto plain are heated by geothermal steam and gases and are not directly impacted by magmatic fluids, we have adopted the P CO2 and temperature distribution in these shallow groundwaters to delimit the areal extension of the underlying geothermal aquifer, which is 0.777 km 2 and 0.752 km 2 based on the P CO2 and temperature maps respectively, in agreement with the area from MT data, 0.7 km 2. The revised volume method was used considering the specific productivity of liquiddominated geothermal systems, 40 t ⋅ h − 1 ⋅ km − 3 , and assuming that the geothermal aquifer has a thickness of 2.8 km and a temperature of 200-275 • C. The hourly production rate of geothermal fluids resulted to be in the range 84.2-87.0 t ⋅ h − 1 , while the extractable thermal and electrical powers turned out to be 25 ± 6(1σ) MWt and 8.3 ± 2.0 MWe, respectively. Drilling of one or two production wells and one reinjection well (depth in the order of 1.5-2.0 km) could be therefore a suitable technical solution.19 52 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Climate change effects at basin-scale: Weathering rates and CO2 consumption assessment by using the reaction path modelling
(Elsevier Science Limited:Oxford Fulfillment Center, PO Box 800, Kidlington Oxford OX5 1DX United Kingdom:011 44 1865 843000, 011 44 1865 843699, EMAIL: asianfo@elsevier.com, tcb@elsevier.co.UK, INTERNET: http://www.elsevier.com, http://www.elsevier.com/locate/shpsa/, Fax: 011 44 1865 843010, 2025-04); ; ; ; Reaction Path Modelling was used to calculate the fluxes in terms of solutes and CO 2 consumption during the water-rock interaction process at the basin-scale, considering the current and future climate scenarios (temperature and atmospheric CO 2 concentration) and two types of solid reagent (Silicate Solid Reagent-SSR and Carbonate-Silicate Reagent C-SSR). Two modelling were performed considering solid reagents and simulating their weathering in the current climate scenario and two other simulations were developed to consider the future climate scenario (Representative Concentration Pathways-RCP 8.5). The study highlights that although the higher temperature promotes an increase of total dissolved ions (TDS) into riverine waters, the higher temperature also causes a decrease in precipitation and, thus, in the runoff. This condition will lead to a reduction in weathering rate and CO 2 consumption at the basin scale. The main indirect effect of a negative CO 2 consumption budget is a further increase in CO 2 atmospheric concentration.3 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Nature-Based Options for Improving Urban Environmental Quality: Using Black Poplar Trees for Monitoring Heavy Metals Pollution in Urbanized Contexts
(2024-06-19) ;Perri, Gilda ;Gargano, Domenico; ; Several researchers recognize the importance of plants as effective tools for environmental biomonitoring. The black poplar (Populus nigra L.) often emerges as a useful bioindicator of air quality in urban environments, where this tree species is widely employed for urban areas. Here, we used ICP-MS analysis to assess the presence and concentration of trace elements, with a special focus on heavy metals (HMs), in black poplar leaves and soil samples from three urbanized sites showing varying degrees of environmental quality. Specifically, the foliar concentrations of Zn (173.3 ppm), Cd (0.7 ppm), Co (1.1 ppm) and As (0.2 ppm) exceeded reference values for unpolluted sites, indicating potential environmental hazards. Additionally, we correlated the foliar concentrations of HMs with those quantified in soil and with air quality data provided by the regional air quality-monitoring network. Subsequently, we estimated the values of foliar fluctuating asymmetry, and evaluated their relationships with HM concentrations in both leaves and soil. Our results suggest that element concentrations in black poplar leaves are related to soil contamination and atmospheric quality, and the extent depends on the proximity to relevant pollution sources. Furthermore, the study species showed a pronounced accumulation capacity for some HMs (i.e., Zn, Cd) commonly found in particulate matter. The extent of foliar fluctuating asymmetry is related to atmospheric quality and HM soil concentration, possibly because of the growth anomalies induced by this kind of environmental contamination. Overall, our data indicate the study species can supply an effective biomonitoring service in urbanized contexts, offering valuable insights into the occurrence and biological implications of heavy metal contamination.16 16 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , A multidisciplinary geochemical approach to geothermal resource exploration: The Spezzano Albanese thermal system, southern Italy
(2023-07-07); ; ; ; This work aims to define the geothermal conceptual model of the Spezzano Albanese thermal system located in the northern sector of the Calabria Region, along the western edge of the Sibari Plain. The study confirms that the deep thermal reservoir of Spezzano Albanese is mainly hosted within the permeable levels of the evaporite deposits of the Messinian succession including siltstones with manganese mineralisation, halite, and gypsumarenites. The thermal waters show discharging temperature between 20.2 and 26.6 ◦C and a high compositional variability, from Na–Cl to Na–Ca–HCO3. The compositional evolution (from Na–Cl to Na–HCO3) is accompanied by a decrease in both salinity and the concentrations of most dissolved constituents, including Cl, Br, B, Li, Na, K, Mg, Ca, and Ba. These variations are due to mixing between the thermal endmember, rich in Cl and related components, and low-salinity, cold shallow waters (temperature between 17.5 and 22.7 ◦C). The study points out that the thermal endmember derives by halite dissolution and more complex water-rock interaction processes involving (1) the dissolution of other solid phases of the Messinian deposits, as also confirmed by δ34S values of dissolved sulphate and sulphide, and (2) the precipitation of secondary solid phases (e.g., barite). The geothermometric modelling suggests that the thermal groundwaters in the deep reservoir are probably in equilibrium with either (i) quartz, calcite, disordered dolomite, low-albite, and K-feldspar, as well as with pyrophyllite and poorly crystalline kaolinite (as proxies of clay minerals) at temperatures of 65.5 ± 4.5 ◦C or (ii) quartz, calcite, disordered dolomite, low-albite, disordered adularia, laumontite and saponites at temperatures of 56.1 ± 4.3 ◦C, based on the first and second geothermometric model, respectively. The δ18O and δ2H values of water confirm a meteoric origin for the thermal waters with average recharge altitudes between 745 and 857 m a.s.l. These elevations are compatible with the recharge from the western side of the Esaro valley where evaporite successions are found close to the surface. The isotopic value of the dissolved CO2 associated to the Spezzano Terme water highlights its likely microbial origin, as recognised for other thermal circuits hosted in sedimentary rocks of the southern Apennines. Furthermore, the thermal endmember shows a noteworthy enrichment in CH4 with respect to air due to the interaction of groundwater with sediments rich in organic matter. Although methane could have a biogenic origin, the presence of a minor component of thermogenic methane in the gas phase dissolved in the Spezzano Terme waters cannot be completely excluded. The data obtained in this study allow to assume that the recharge meteoric waters descend to a maximum depth of about 1.1–1.4 km below the main emergence area and then the regional NE-SW fault systems probably act as a preferential pathway for the ascent of the thermal waters towards the surface. These waters discharge at Spezzano Albanese, where the crystalline-metamorphic units cropping out immediately upstream of the emergence area act as cap-rock favouring the final ascent towards the surface of the thermal waters.159 77 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Fluid geochemistry in a low-enthalpy geothermal field along a sector of southern Apennines chain (Italy)
The chemical and isotopic features of the fluids (water and gases) in the Lucane thermal area (southern Italy) have been investigated in order to verify their origin, water temperature in the geothermal reservoir, and to recognize the main natural processes concerning the water composition during ascent towards the surface. The Lucane geothermal system is placed in the southern sector of the Apennines chains, a seismically active area, close to the southern base of the Mt. Alpi carbonate massif. Along the study area, two main sets of high-angle faults form an almost orthogonal fault system that, as suggested by local structural geology, acts as a preferential pathway for uprising deep fluids. Here, we recognized two different types of waters: (i) cold shallow waters having a meteoritic origin and interacting with carbonate rocks (dolomite and calcite), whose dissolved gases show a dominant atmospheric contribution and (ii) hypothermal waters (average temperature of 21 °C), having a meteoritic origin and interacting with both carbonate rocks and inter-bedded evaporitic deposit. Geochemical data allow estimating a geothermal reservoir temperature between 30 °C and 60 °C, according to silica and Ca/ Mg geothermometers, respectively. A heat discharge related to hypothermal groundwater flow between 7.75E +06 and 2.00E+07 J/s was computed. δ18O and δ2Η data allowed recognizing a meteoric origin for hypothermal (hereafter TL) waters, with mean recharge (infiltration) elevations between 1300 and 1700 m a.s.l. These waters are gas-rich (e.g., CO2 and He), which amounts are higher than those in air-saturated water (ASW). Carbon and helium isotope signature in the TL waters indicate their mainly crustal origin and involve a tectonic control on fluid migration through the crust. Furthermore, we observe that the He isotopic signature in gases dissolved in TL waters is stable over time and its monitoring could be a powerful tool to assess the seismogenetic processes since their preparatory phases.111 8
