Skip to main content
The search returned 10 results
Now showing 1 - 10 of 10
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Radon activity concentrations in the soils of the Gioia Tauro Basin (Calabria, southern Italy), with insights on geo-structural control

    (Abingdon U.K.: Taylor & Francis Surrey U.K.: School of Earth Sciences and Geography Kingston University, 2005-, 2026-03-17)
    Muto, Marina
    ;
    Lupiano, Valeria
    ;
    ;
    Buttafuoco, Gabriele
    ;
    Procopio, Salvatore
    The main aim of this work is to map Radon activity concentrations in the soil of a tectonicallyactive Mediterranean sector (Gioia Tauro Basin, Calabria, southern Italy). A total of 276 measurements have been taken at a depth of ca. 60 cm from the soil surface, using a portable ionisation chamber, according to a pre-established protocol. Measurements have been performed at the centroids of a 2.5 km square grid, and along transverse sections across the main faults. Spatial variation of 222Rn concentrations in soil gas has been modelled through a geostatistical approach, generating 200 realisations by sequential Gaussian simulation. Maps of 222Rn, of 220Rn and of ratio 222Rn / (220Rn + 222Rn) are presented. The distribution of Rn concentrations is highly asymmetrical (median: 14.5 kBq/ m3; standard dev. 22.7 kBq/m3; min: 0.06 kBq/m3; max: 137 kBq/m3). The results provide insights into the relationships with the geo-structural characteristics of the territory.
      12  64
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The geothermal resources of Vulcano Island (Aeolian archipelago, Italy)

    (Oxford UK: Elsevier Science Limited, 2025-05-31) ; ;
    Russo, L
    ;
    ;
    We evaluated the geothermal resources of Vulcano Island considering the available geological, geochemical, and geophysical information in the framework of the conceptual model of La Fossa magmatic-geothermal system. Having ascertained that the shallow groundwaters of the Vulcano Porto plain are heated by geothermal steam and gases and are not directly impacted by magmatic fluids, we have adopted the P CO2 and temperature distribution in these shallow groundwaters to delimit the areal extension of the underlying geothermal aquifer, which is 0.777 km 2 and 0.752 km 2 based on the P CO2 and temperature maps respectively, in agreement with the area from MT data, 0.7 km 2. The revised volume method was used considering the specific productivity of liquiddominated geothermal systems, 40 t ⋅ h − 1 ⋅ km − 3 , and assuming that the geothermal aquifer has a thickness of 2.8 km and a temperature of 200-275 • C. The hourly production rate of geothermal fluids resulted to be in the range 84.2-87.0 t ⋅ h − 1 , while the extractable thermal and electrical powers turned out to be 25 ± 6(1σ) MWt and 8.3 ± 2.0 MWe, respectively. Drilling of one or two production wells and one reinjection well (depth in the order of 1.5-2.0 km) could be therefore a suitable technical solution.
      19  51
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Climate change effects at basin-scale: Weathering rates and CO2 consumption assessment by using the reaction path modelling

    (Elsevier Science Limited:Oxford Fulfillment Center, PO Box 800, Kidlington Oxford OX5 1DX United Kingdom:011 44 1865 843000, 011 44 1865 843699, EMAIL: asianfo@elsevier.com, tcb@elsevier.co.UK, INTERNET: http://www.elsevier.com, http://www.elsevier.com/locate/shpsa/, Fax: 011 44 1865 843010, 2025-04) ; ; ; ;
    Reaction Path Modelling was used to calculate the fluxes in terms of solutes and CO 2 consumption during the water-rock interaction process at the basin-scale, considering the current and future climate scenarios (temperature and atmospheric CO 2 concentration) and two types of solid reagent (Silicate Solid Reagent-SSR and Carbonate-Silicate Reagent C-SSR). Two modelling were performed considering solid reagents and simulating their weathering in the current climate scenario and two other simulations were developed to consider the future climate scenario (Representative Concentration Pathways-RCP 8.5). The study highlights that although the higher temperature promotes an increase of total dissolved ions (TDS) into riverine waters, the higher temperature also causes a decrease in precipitation and, thus, in the runoff. This condition will lead to a reduction in weathering rate and CO 2 consumption at the basin scale. The main indirect effect of a negative CO 2 consumption budget is a further increase in CO 2 atmospheric concentration.
      3
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    A multidisciplinary geochemical approach to geothermal resource exploration: The Spezzano Albanese thermal system, southern Italy

    This work aims to define the geothermal conceptual model of the Spezzano Albanese thermal system located in the northern sector of the Calabria Region, along the western edge of the Sibari Plain. The study confirms that the deep thermal reservoir of Spezzano Albanese is mainly hosted within the permeable levels of the evaporite deposits of the Messinian succession including siltstones with manganese mineralisation, halite, and gypsumarenites. The thermal waters show discharging temperature between 20.2 and 26.6 ◦C and a high compositional variability, from Na–Cl to Na–Ca–HCO3. The compositional evolution (from Na–Cl to Na–HCO3) is accompanied by a decrease in both salinity and the concentrations of most dissolved constituents, including Cl, Br, B, Li, Na, K, Mg, Ca, and Ba. These variations are due to mixing between the thermal endmember, rich in Cl and related components, and low-salinity, cold shallow waters (temperature between 17.5 and 22.7 ◦C). The study points out that the thermal endmember derives by halite dissolution and more complex water-rock interaction processes involving (1) the dissolution of other solid phases of the Messinian deposits, as also confirmed by δ34S values of dissolved sulphate and sulphide, and (2) the precipitation of secondary solid phases (e.g., barite). The geothermometric modelling suggests that the thermal groundwaters in the deep reservoir are probably in equilibrium with either (i) quartz, calcite, disordered dolomite, low-albite, and K-feldspar, as well as with pyrophyllite and poorly crystalline kaolinite (as proxies of clay minerals) at temperatures of 65.5 ± 4.5 ◦C or (ii) quartz, calcite, disordered dolomite, low-albite, disordered adularia, laumontite and saponites at temperatures of 56.1 ± 4.3 ◦C, based on the first and second geothermometric model, respectively. The δ18O and δ2H values of water confirm a meteoric origin for the thermal waters with average recharge altitudes between 745 and 857 m a.s.l. These elevations are compatible with the recharge from the western side of the Esaro valley where evaporite successions are found close to the surface. The isotopic value of the dissolved CO2 associated to the Spezzano Terme water highlights its likely microbial origin, as recognised for other thermal circuits hosted in sedimentary rocks of the southern Apennines. Furthermore, the thermal endmember shows a noteworthy enrichment in CH4 with respect to air due to the interaction of groundwater with sediments rich in organic matter. Although methane could have a biogenic origin, the presence of a minor component of thermogenic methane in the gas phase dissolved in the Spezzano Terme waters cannot be completely excluded. The data obtained in this study allow to assume that the recharge meteoric waters descend to a maximum depth of about 1.1–1.4 km below the main emergence area and then the regional NE-SW fault systems probably act as a preferential pathway for the ascent of the thermal waters towards the surface. These waters discharge at Spezzano Albanese, where the crystalline-metamorphic units cropping out immediately upstream of the emergence area act as cap-rock favouring the final ascent towards the surface of the thermal waters.
      159  77
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Hydrogeochemical and isotopic characterization of the Gioia Tauro coastal Plain (Calabria - southern Italy): A multidisciplinary approach for a focused management of vulnerable strategic systems

    This work pursues the hydro-geochemical and isotopic characterization of the complex groundwater system of the Gioia Tauro Plain, one of the most important industrialized and agricultural coastal areas of southern Italy. The anthropic pressure exposes the water resources at risk of depletion and quality degradation making the plain groundwater a system of high scientific and social interest. The plain is characterized by a shallow aquifer, mostly recharged by local rains and a deep aquifer apparently less influenced by local precipitation. Both aquifers are mainly Ca-HCO3 waters except for localized sectors where Na-HCO3, Na-Cl and Ca-SO4 waters are present. In deep aquifer, both prolonged interaction with sedimentary rocks, mainly deriving from the erosion of crystalline rocks, and direct cation exchange represent the primary factors controlling the formation of Na-HCO3 waters. Mixing processes between these waters and either connate brine and/or deep thermal waters contribute to the formation of isolated high salinity Na-Cl-rich waters. In shallow aquifer, inputs of N-rich sewage and agriculture-related contaminants, and SOx emissions in proximity of the harbor are responsible of the increasing nitrate and sulphate concentrations, respectively. The Cl/Br and NO3/Cl ratios highlight contamination mainly linked to agricultural activities and contribution of wastewater. Along the northern boundary, the warmest groundwater (Na-Cl[SO4]) were found close to a bend of the main strike-slip fault system, locally favouring the rising of B- and Li-rich deep waters, testifying the influence of geological-structural features on deep water circulation. Despite the high-water demand, a direct marine intrusion is localized in a very restricted area, where we observed an incipient groundwater-seawater mixing (seawater contribution ≤7 %). The qualitative and quantitative conditions of the shallow aquifer still have acceptable levels because of the relatively high recharge inflow. A reliable hydrogeochemical conceptual model, able to explain the compositional variability of the studied waters, is proposed.
      143  103
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Different Ground Subsidence Contributions Revealed by Integrated Discussion of Sentinel-1 Datasets, Well Discharge, Stratigraphical and Geomorphological Data: The Case of the Gioia Tauro Coastal Plain (Southern Italy)

    Groundwater is the main water supply for agricultural and industrial needs in many coastal plains worldwide. Groundwater depletion often triggers land subsidence, which threatens manmade infrastructure and activities and aggravates other geohazards. We applied a multi-temporal interferometric synthetic aperture radar technique to Sentinel-1 datasets to detect ground motion in the Gioia Tauro plain (Calabria, Southern Italy) from 2018 to 2021. The InSAR data were analysed through the integrated use of groundwater head, stratigraphical and geomorphological data, and land use information to distinguish the potential subsidence divers. The results show that subsiding areas, with a mean rate of about 10 mm/yr, are in the middle of the plain, and their location is influenced by the spatial distribution of compressible sediments included in the shallow aquifer. Furthermore, the subsidence arrangement is spatially accordant with the main groundwater depression area, which can be ascribed to the ongoing and increasing water pumping for predominantly agricultural usage. We also observed that subsidence (up to 10 mm/yr) affects the western dock of the Gioia Tauro harbour, in front of which, in very shallow water, are two submarine canyon heads already affected by slides in the past.
      77  88
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Active degassing of crustal CO2 in areas of tectonic collision: A case study from the Pollino and Calabria sectors (Southern Italy)

    Carbon dioxide (CO2) is released from the Earth’s interior into the atmosphere through both volcanic and non-volcanic sources in a variety of tectonic settings. A quantitative understanding of CO2 outgassing fluxes in different geological settings is thus critical for decoding the link between the global carbon budget and different natural processes (e.g., volcanic eruption and earthquake nucleation) and the effects on the climate evolution over geological time. It has recently been proposed that CO2 degassing from non-volcanic areas is a major component of the natural CO2 emission budget, but available data are still sparse and incomplete. Here, we report the results of a geochemical survey aimed at quantifying CO2 emissions through cold and thermal springs of the tectonically active Pollino Massif and Calabrian arc (Southern Italy). The chemical ad isotopic (He and C) composition of fifty-five dissolved gas samples allows to identify two different domains: 1) a shallow system dominated by gas components of atmospheric signature (helium, hereafter He) and biogenic origin (C), and 2) a deeper system in which crustal/deep fluids (CO2 and He) are dominant. The measured He isotope ratios range from 0.03 to 1.1 Ra (where Ra is the He isotopic ratio in the atmosphere) revealing a variable atmospheric contamination. Furthermore, the He isotopic data indicate the presence of traces of mantle He contributions (2%–3%) in the thermal groundwater. The prevailing low R/Ra values reflect the addition of crustal radiogenic 4He during groundwater circulation. Using helium and carbon isotope data, we explore the possible sources of fluids and the secondary processes (dissolution/ precipitation) that act to modify the chemistry of pristine volatiles. For the thermal springs, we estimate a deep C output of 2.3 x 107 to 6.1 x 108 mol year−1. These values correspond to deep CO2 fluxes per square km comparable with those estimated in several active and inactive volcanic areas and in continental regions affected by metamorphic CO2 degassing (e.g., the southern margin of the Tibetan Plateau).
      255  59
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Hydrostratigraphic Framework and Physicochemical Status of Groundwater in the Gioia Tauro Coastal Plain (Calabria—Southern Italy)

    In this study, we analysed the Gioia Tauro Plain (Tyrrhenian coast, southern Italy) in terms of hydrostratigraphy and the physicochemical status of groundwater. We investigated the hydrostratigraphic framework of the area identifying a deep aquifer (made by late Miocene succession), an aquitard (consisting of Pliocene clayey and silty deposits) and a shallow aquifer (including Late Pleistocene and Holocene marine and alluvial sediments) using subsoil data (boreholes and geophysics). Our reconstruction showed that the structural geology controls the spatial pattern of the aquitard top and the shallow aquifer thickness. Furthermore, we evaluated the hydraulic conductivity for the shallow aquifer using an empirical method, calibrated by slug tests, obtaining values ranging from 10􀀀4 to 10􀀀5 m/s with a maximum of 10􀀀3 m/s located close to inland dune fields. The piezometric level of the shallow aquifer recorded a significant drop between the 1970s and 2021 (􀀀35 m as the worst value). It is the effect of climate and soil use changes, the latter being the increased water demand for kiwi cultivation. Despite the overexploitation of the shallow aquifer, shallow groundwater is fresh (736 S/cm as mean electrical conductivity) except for a narrow coastal area where the electrical conductivity is more than 1500 S/cm, which can be due to the seawater intrusion. What was more complex was the physicochemical status of the deep aquifer characterised by high temperature (up to 25.8 C) and electrical conductivity up to 10,520 S/cm along the northern and southern plain boundaries marked by tectonic structures. This issue suggested the dominant role of the local fault system that is likely affecting the deep groundwater flow and its chemical evolution.
      139  102
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Fluid geochemistry in a low-enthalpy geothermal field along a sector of southern Apennines chain (Italy)

    The chemical and isotopic features of the fluids (water and gases) in the Lucane thermal area (southern Italy) have been investigated in order to verify their origin, water temperature in the geothermal reservoir, and to recognize the main natural processes concerning the water composition during ascent towards the surface. The Lucane geothermal system is placed in the southern sector of the Apennines chains, a seismically active area, close to the southern base of the Mt. Alpi carbonate massif. Along the study area, two main sets of high-angle faults form an almost orthogonal fault system that, as suggested by local structural geology, acts as a preferential pathway for uprising deep fluids. Here, we recognized two different types of waters: (i) cold shallow waters having a meteoritic origin and interacting with carbonate rocks (dolomite and calcite), whose dissolved gases show a dominant atmospheric contribution and (ii) hypothermal waters (average temperature of 21 °C), having a meteoritic origin and interacting with both carbonate rocks and inter-bedded evaporitic deposit. Geochemical data allow estimating a geothermal reservoir temperature between 30 °C and 60 °C, according to silica and Ca/ Mg geothermometers, respectively. A heat discharge related to hypothermal groundwater flow between 7.75E +06 and 2.00E+07 J/s was computed. δ18O and δ2Η data allowed recognizing a meteoric origin for hypothermal (hereafter TL) waters, with mean recharge (infiltration) elevations between 1300 and 1700 m a.s.l. These waters are gas-rich (e.g., CO2 and He), which amounts are higher than those in air-saturated water (ASW). Carbon and helium isotope signature in the TL waters indicate their mainly crustal origin and involve a tectonic control on fluid migration through the crust. Furthermore, we observe that the He isotopic signature in gases dissolved in TL waters is stable over time and its monitoring could be a powerful tool to assess the seismogenetic processes since their preparatory phases.
      110  8
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Hydrogeological model of a complex coastal aquifers: the case of Sibari Plain (Southern Italy)

    (Leibniz-Institut für Angewandte Geophysik, Hannover, 2014-06) ; ; ; ;
    The increasing overexploitation of water resources is observed on a global scale in the previous decades; this trend involves the coastal regions of Mediterranean Basin (Van Beynen et alii, 2012). As an effect of increasing groundwater discharge from coastal aquifers, the phenomenon of seawater intrusion is becoming a serious problem for most of the coastal aquifers, especially in the Mediterranean area (COST, 2003; COST, 2005). The aim of this paper is to present the modeling of a coastal porous aquifer located in the complex plain of Sibari (Southern Italy), a plain deeply modified as an effect of reclamation works realized after thirties. The model was implemented using piezometric historical data (from thirties) to establish the effect of seawater intrusion when the well discharge was negligible (natural conditions), the modification in subsequent decades, to be used for forecasting purpose and for evaluate the evolution of groundwater resource. The area actually represents a landscape with anthropic equilibrium based on the works of a land reclamation project (1960s-1990s). Study area is about 365 km2 for a coastline of about 35 km, about which an hydrogeological conceptual model was defined. The area can be conceptualized into three hydrogeological complexes (from the top): sand complex, a clay complex and a sand and conglomerate complex, constituting the deep aquifer, the bottom of which is not well-defined. Shallow aquifer is predominantly fed by direct rainwater infiltration. Deep aquifer is fed by outflows of the mountainous aquifers as the case of limestone aquifer of Pollino Mount,and of shallow granitic aquifer of the Sila massif (Guerricchio and Melidoro, 1975). The maximum piezometric levels of the deep aquifer are equivalent to approximately 40 m asl, so in some areas it presents artesian feature. The computer codes selected for numerical groundwater modelling were MODFLOW (McDonald and Harbaugh, 1998) and SEAWAT (Guo and Langevin, 2002). This groundwater flow modelling is based on the concept of a equivalent homogeneous porous medium by which it is assumed that the real heterogeneous aquifer can be simulated as homogeneous porous media within cells or elements (Anderson, 2002). The modeled aquifer area was uniformly discretized, using Peclet number, into a finite difference grid of 97,735 cells of 240 m x 350 m. For the vertical discretization, model was divided into five layers of variable thicknesses, defined on the basis of a multi-methodological geological survey. Climatic, hydrological and agricultural data were processed to defines inputs for the numerical model based on the variable-density flow. An hydrological balance using monthly and annual of 13 thermo-pluviometric stations falling in the study area, in the time period 1930-1975, was done (Polemio and Casarano, 2008, Polemio et alii, 2013). The numerical model was calibrated with PEST code with a correlation coefficient equal to 0,90. Preliminary results of steady flow and of groundwater salinity spatial are now available and shows it is not sustainable in the case of shallow aquifer and it can be improved in the case of deep aquifer.
      317  1529