Sonnessa, Alberico
5 results
Filters
Settings
The search returned 5 results
Now showing 1 - 5 of 5
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , A tool for mapping the evolution of a lava field through the Etna video-surveillance camera network
(2016-04-06); ; ; ; In active volcanic areas it is often difficult carry out direct surveys during an eruption, remote sensing techniques based on airborne/satellite platforms and ground-based sensors have remarkable monitoring potentialities in terms of safety and observation capability. In addition, the recent development of high resolution digital cameras, laser scanners and SAR instruments have improved the ability to obtain reliable measurements for modelling the evolution of effusive and explosive eruptions by following the rate of advancement of a lava flow or the dispersal of a volcanic plume. In order to collect data at an adequate level of accuracy and frequency it is not possible to exclusively rely on airborne or satellite methods and it is necessary to carry out measurements using also remote sensing instruments operating on the ground. Among the other techniques, the use of a simplified photogrammetric approach based a video-surveillance camera network represents a straightforward alternative for rapid mapping in active volcanic areas. Therefore a procedure for optimizing and extending the observational capability of the Etna NEtwork of Thermal and VIsible cameras (NETVIS) for systematically monitoring and quantifying surface sin-eruptive processes was implemented. The activity included also the extension of the permanent video-surveillance network by installing additional mobile stations. A dedicated tool for automatic processing of image datasets was developed and tested in both simulated and real scenarios to obtain a time series of digital orthophotos for tracking the evolution of a lava flow emplacement. The developed tool was tested by processing images acquired by the Etna_NETVIS sensors, in particular from Monte Cagliato thermal camera, during the 2011 paroxysmal episodes of the New South East Crater that poured lava flows in the Valle del Bove.133 161 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Indoor height determination of the new absolute gravimetric station of L'Aquila
In this paper we describe all the field operations and the robust post-processing procedures to determine the height of the new absolute gravimetric station purposely selected to belong to a new absolute gravimetric network and located in the Science Faculty of the L’Aquila University (Italy). This site has been realized indoor in the Geomagnetism laboratory, so that the height cannot be measured directly, but linking it to the GNSS antenna of AQUI benchmark located on the roof of the same building, by a classical topographic survey. After the topographic survey, the estimated height difference between AQUI and the absolute gravimetric site AQUIg is 14.970 ± 0.003 m. At the epoch of the 2018 gravimetric measurements, the height of AQUI GNSS station was 712.974 ± 0.003 m, therefore the estimated ellipsoidal height of the gravimetric site at the epoch of gravity measurements is 698.004 ± 0.005 m. Absolute gravity measurements are referred to the equipotential surface of gravity field, so that the knowledge of the geoidal undulation at AQUIg allows us to infer the orthometric height as 649.32 m.538 133 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , The evolution of the Sciara del Fuoco subaerial slope during the 2007 Stromboli eruption: Relation between deformation processes and effusive activity
(2009-05-10); ; ; ; Focusing on the Island of Stromboli, this research investigates whether airborne remote sensing systems, such as those based on digital photogrammetry and laser scanner sensors, can be adopted to monitor slope deformation and lava emplacement processes in active volcanic areas. Thanks to the capability of extracting accurate topographic data and working on flexible time schedules, these methods can be used to constrain the regular and more frequent measurements derived from satellite observations. This work is dedicated to the monitoring of Stromboli's volcanic edifice which is beneficial when obtaining quantitative data on the geometry of deformation features and the displaced (failures and landslides) and emplaced (lava flows) volumes. In particular, we focus on the capability of extracting average effusion rates from volume measurements that can be used to validate or integrate satellite-derived estimates. Since 2001, a number of airborne remote sensing surveys, namely Digital Photogrammetry (DP) and Airborne Laser Scanning (ALS), have been carried out on Stromboli's volcano to obtain high resolution Digital Elevation Models (DEM) and orthophotos with sub-meter spatial resolution and a time schedule suitable for monitoring the morphological evolution of the surface during the quiescent phases. During the last two effusive eruptions (2002–2003 and 2007) the surface modifications, created on the Sciara del Fuoco slope and on the crater area as a consequence of effusive activity, were quantified and monitored using the same methodologies. This work, which is based on the results obtained from the multi-temporal quantitative analysis of the data collected from 2001 to 2007, mainly focuses on the 2007 eruption but also accounts for analogies and differences regarding the 2002–2003 event. The 2007 eruption on the Sciara del Fuoco slope from 27 February until 2 April, produced a compound lava field including a lava delta on the shoreline, discharging most of the lava into the sea. The comparison of the 2007 DEMs with a pre-eruption surface (2006 LIDAR survey) allowed for the evaluation of the total lava volume that accumulated on the subaerial slope while two syn-eruption DEMs were used to calculate the average effusion rates during the eruption. Since the evolution of a lava field produced during an eruption can be seen as a proxy for the magma intrusion mechanism, hypotheses are formulated on the connection between the lava discharge and the instabilities suffered by the slope.281 24 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Assessing and improving the measuring capability of the Etna_NETVIS camera network for lava flow rapid mapping
(2014-04-27); ; ; ; This work is aimed at improving the performance of the ground NEtwork of Thermal and VIsible and cameras located on Mt. Etna volcano (Etna_NETVIS) by optimizing its observational capability on lava flows evolution and by developing dedicated tools for systematically measuring quantitative parameters of known accuracy. The first goal will be achieved through the analysis of the geometrical configuration and its improvement by means of the establishment of additional observation sites to be equipped with mobile stations, depending on the area of interest. This will increment the spatial coverage and improve the observation of the most active areas for surface sin-eruptive processes. For the second objective we will implement new processing tools to permit a reliable quantitative use of the data collected by the surveillance sensors of NETVIS, extending their capability in monitor the lava flow thermal and spatial evolution and by providing georeferenced data for rapid mapping scope. The tool will be used to automatically pre-process multitemporal datasets and will be tested on both simulated and real scenarios. Thanks to data collected and archive by the NETVIS INGV team, we will have the opportunity to develop and test the procedure in different operational conditions selected among the large number of lava flows coupled to lava fountan events occurred between 2011 and 2013. Additionally, Etna_NETVIS data can be used to downscale the information derived from satellite data and/or to integrate the satellite datasets in case of incomplete coverage or missing acquisitions (both due to low revisiting time or bad geometrical conditions). Therefore an additional goal is that of comparing/integrating quantitative data derived from visible and radar satellite sensors with the maps obtained using Etna_NETVIS. The procedure will take into account the discrepancy among the different datasets in terms of accuracy and resolution and will attempt to provide a combined approach (based on error analysis and data weighting) to evaluate the final results reliability. Preliminary results on the procedure and algorithm adopted for geometric and radiometric sensor calibration, definition of optimized configurations through simulation and for extracting updated mapping data from multi-temporal dataset will be presented. This work is developed in the framework of the EU-FP7 project “MED-SUV” (MEDiterranean SUpersite Volcanoes).177 298 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Etna_NETVIS: A dedicated tool for automatically pre-processing high frequency data useful to extract geometrical parameters and track the evolution of the lava field
(Geophysical Research Abstracts, 2016-04-17); ; ; ; In order to improve the observation capability in one of the most active volcanic areas in the world, Mt. Etna, we developed a processing method to use the surveillance cameras for a quasi real-time mapping of syn-eruptive processes. Following an evaluation of the current performance of the Etna permanent ground NEtwork of Thermal and Visible Sensors (Etna_NETVIS), its possible implementation and optimization was investigated to determine the locations of additional observation sites to be rapidly set up during emergencies. A tool was then devised to process time series of ground-acquired images and extract a coherent multi-temporal dataset of georeferenced map. The processed datasets can be used to extract 2D features such as evolution maps of active lava flows. The tool was validated on ad-hoc test fields and then adopted to map the evolution of two recent lava flows. The achievable accuracy (about three times the original pixel size) and the short processing time makes the tool suitable for rapidly assessing lava flow evolutions, especially in the case of recurrent eruptions, such as those of the 2011–2015 Etna activity. The tool can be used both in standard monitoring activities and during emergency phases (eventually improving the present network with additional mobile stations) when it is mandatory to carry out a quasi-real-time mapping to support civil protection actions. The developed tool could be integrated in the control room of the Osservatorio Etneo, thus enabling the Etna_NETVIS for mapping purposes and not only for video surveillance.107 201
