Skip to main content
The search returned 31 results
Now showing 1 - 10 of 31
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    A multidisciplinary effort to assign realistic source parameters to models of volcanic ash-cloud transport and dispersion during eruptions

    During volcanic eruptions, volcanic ash transport and dispersion models (VATDs) are used to forecast the location and movement of ash clouds over hours to days in order to define hazards to aircraft and to communities downwind. Those models use input parameters, called “eruption source parameters”, such as plume height H, mass eruption rate Ṁ, duration D, and the mass fraction m63 of erupted debris finer than about 4 or 63 μm, which can remain in the cloud for many hours or days. Observational constraints on the value of such parameters are frequently unavailable in the first minutes or hours after an eruption is detected. Moreover, observed plume height may change during an eruption, requiring rapid assignment of new parameters. This paper reports on a group effort to improve the accuracy of source parameters used by VATDs in the early hours of an eruption. We do so by first compiling a list of eruptions for which these parameters are well constrained, and then using these data to review and update previously studied parameter relationships. We find that the existing scatter in plots of H versus Ṁ yields an uncertainty within the 50% confidence interval of plus or minus a factor of four in eruption rate for a given plume height. This scatter is not clearly attributable to biases in measurement techniques or to well-recognized processes such as elutriation from pyroclastic flows. Sparse data on total grain-size distribution suggest that the mass fraction of fine debris m63 could vary by nearly two orders of magnitude between small basaltic eruptions ( 0.01) and large silicic ones (> 0.5). We classify eleven eruption types; four types each for different sizes of silicic and mafic eruptions; submarine eruptions; “brief” or Vulcanian eruptions; and eruptions that generate co-ignimbrite or co-pyroclastic flow plumes. For each eruption type we assign source parameters. We then assign a characteristic eruption type to each of the world's 1500 Holocene volcanoes. These eruption types and associated parameters can be used for ash-cloud modeling in the event of an eruption, when no observational constraints on these parameters are available.
      331  45
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    MAFALDA: An early warning modeling tool to forecast volcanic ash dispersal and deposition

    (2008) ; ; ;
    Barsotti, S.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Pisa, Pisa, Italia
    ;
    Nannipieri, L.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Pisa, Pisa, Italia
    Forecasting the dispersal of ash from explosive volcanoes is a scientific challenge to modern volcanology. It also represents a fundamental step in mitigating the potential impact of volcanic ash on urban areas and transport routes near explosive volcanoes. To this end we developed a web-based early-warning modeling tool named MAFALDA (Modeling And Forecasting Ash Loading and Dispersal in the Atmosphere) able to quantitatively forecast ash concentrations in the air and on the ground. The main features of MAFALDA are: the usage of (1) a dispersal model, named VOL-CALPUFF (Barsotti et al. 2008) that couples the column ascent phase with the ash-cloud transport and (2) high-resolution weather forecasting data, the capability to run and merge multiple scenarios, and the web-based structure of the procedure that makes it suitable as an early-warning tool. MAFALDA produces plots for a detailed analysis of ash-cloud dynamics and ground deposition, as well as synthetic 2D maps of areas potentially affected by dangerous concentrations of ash. A first application of MAFALDA to the long-lasting weak plumes produced at Mt. Etna (Italy) is presented. A similar tool can be useful to civil protection authorities and volcanic observatories in reducing the impact of the eruptive events. MAFALDA can be accessed at http://mafalda.pi.ingv.it.
      987  28
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    On the feasibility and usefulness of high-performance computing in probabilistic volcanic hazard assessment: An application to tephra hazard from Campi Flegrei

    For active volcanoes, knowledge about probabilities of eruption and impacted areas becomes valuable information for decision-makers to develop short- and long-term emergency plans, for which probabilistic volcanic hazard assessment (PVHA) is needed. High-resolution or spatially extended PVHA requires extreme-scale high-performance computing systems. Within the framework of ChEESE (Center of Excellence for Exascale in Solid Earth; www.cheese-coe.eu), an effort was made to generate exascale-suitable codes and workflows to collect and process in some hours the large amount of data that a quality PVHA requires. To this end, we created an optimized HPC-based workflow coined PVHA_HPC-WF to develop PVHA for a volcano. This tool uses the Bayesian event tree methodology to calculate eruption probabilities, vent-opening location(s), and eruptive source parameters (ESPs) based on volcano history, monitoring system data, and meteorological conditions. Then, the tool interacts with the chosen hazard model, performing a simulation for each ESP set or volcanic scenario (VS). Finally, the resulting information is processed by proof-of-concept-subjected high-performance data analytics (HPDA) scripts, producing the hazard maps which describe the probability over time of exceeding critical thresholds at each location in the investigated geographical domain. Although PVHA_HPC-WF can be adapted to other hazards, we focus here on tephra (i.e., lapilli and ash) transport and deposition. As an application, we performed PVHA for Campi Flegrei (CF), Italy, an active volcano located in one of the most densely inhabited areas in Europe and under busy air traffic routes. CF is currently in unrest, classified as being in an attention level by the Italian Civil Protection. We consider an approximate 2,000 × 2,000 × 40 km computational domain with 2 km grid resolution in the horizontal and 40 vertical levels, centered in CF. To explore the natural variability and uncertainty of the eruptive conditions, we consider a large number of VSs allowing us to include those of low probability but high impact, and simulations of tephra dispersal are performed for each of them using the FALL3D model. Results show the potential of HPC to timely execute a vast range of simulations of complex numerical models in large high-resolution computational domains and analyze great volumes of data to obtain quality hazard maps.
      377  190
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Thermal Remote Sensing for Global Volcano Monitoring: Experiences From the MIROVA System

    Volcanic activity is always accompanied by the transfer of heat from the Earth’s crust to the atmosphere. This heat can be measured from space and its measurement is a very useful tool for detecting volcanic activity on a global scale. MIROVA (Middle Infrared Observation of Volcanic Activity) is an automatic volcano hot spot detection system, based on the analysis of MODIS data (Moderate Resolution Imaging Spectroradiometer). The system is able to detect, locate and quantify thermal anomalies in near real-time, by providing, on a dedicated website (www.mirovaweb.it), infrared images and thermal flux time-series on over 200 volcanoes worldwide. Thanks to its simple interface and intuitive representation of the data, MIROVA is currently used by several volcano observatories for daily monitoring activities and reporting. In this paper, we present the architecture of the system and we provide a state of the art on satellite thermal data usage for operational volcano monitoring and research. In particular, we describe the contribution that the thermal data have provided in order to detect volcanic unrest, to forecast eruptions and to depict trends and patterns during eruptive crisis. The current limits and requirements to improve the quality of the data, their distribution and interpretation are also discussed, in the light of the experience gained in recent years within the volcanological community. The results presented clearly demonstrate how the open access of satellite thermal data and the sharing of derived products allow a better understanding of ongoing volcanic phenomena, and therefore constitute an essential requirement for the assessment of volcanic hazards.
      89  82
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The integrated multidisciplinary European volcano infrastructure: from the conception to the implementation

    Recent decades have highlighted the increasing need to connect and strengthen the volcanology community at European level. Indeed, research in the volcanology field is highly qualified in Europe and the volcano monitoring infrastructures have achieved valuable know-how, becoming the state-of-the-art in the world. However, the lack of common good practices in sciences and technologies, missing standards, as well as a significant fragmentation of the community requires coordination to move forward and guarantee a trans-national harmonisation. The European Plate Observing System (EPOS) represented the first opportunity to initiate this process of coordination by encouraging the creation of a European volcanological scientific infrastructure for data and service sharing. During the preparation and the design of EPOS, the volcanology community identified the objectives and the needs of the community building, the services to be provided and the work plan to implement the infrastructure. To achieve this aim, the contribution from three European projects FUTUREVOLC, MED-SUV and EUROVOLC was essential. This paper presents the main steps performed during the last years for building the community and implementing the infrastructure. This paper also describes the strategic choices and actions taken to realise the infrastructure such as the establishment of the Volcano Observation Thematic Core Service (TCS), whose structure and activity are described.
      147  167
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    EUNADICS-AV early warning system dedicated to supporting aviation in the case of a crisis from natural airborne hazards and radionuclide clouds

    The purpose of the EUNADICS-AV (European Natural Airborne Disaster Information and Coordination System for Aviation) prototype early warning system (EWS) is to develop the combined use of harmonised data products from satellite, ground-based and in situ instruments to produce alerts of airborne hazards (volcanic, dust, smoke and radionuclide clouds), satisfying the requirement of aviation air traffic management (ATM) stakeholders (https://cordis.europa.eu/project/id/723986, last access: 5 November 2021). The alert products developed by the EUNADICS-AV EWS,i.e. near-real-time (NRT) observations, email notifications and netCDF (Network Common Data Form) alert data products (called NCAP files), have shown significant interest in using selective detection of natural airborne hazards from polar-orbiting satellites. The combination of several sensors inside a single global system demonstrates the advantage of using a triggered approach to obtain selective detection from observations, which cannot initially discriminate the different aerosol types. Satellite products from hyperspectral ultraviolet–visible (UV–vis) and infrared (IR) sensors (e.g. TROPOMI – TROPOspheric Monitoring Instrument – and IASI – Infrared Atmospheric Sounding Interferometer) and a broadband geostationary imager (Spinning Enhanced Visible and InfraRed Imager; SEVIRI) and retrievals from groundbased networks (e.g. EARLINET – European Aerosol Research Lidar Network, E-PROFILE and the regional network from volcano observatories) are combined by our system to create tailored alert products (e.g. selective ash detection, SO2 column and plume height, dust cloud, and smoke from wildfires). A total of 23 different alert products are implemented, using 1 geostationary and 13 polar-orbiting satellite platforms, 3 external existing service, and 2 EU and 2 regional ground-based networks. This allows for the identification and the tracking of extreme events. The EUNADICS-AV EWS has also shown the need to implement a future relay of radiological data (gamma dose rate and radionuclides concentrations in ground-level air) in the case of a nuclear accident. This highlights the interest of operating early warnings with the use of a homogenised dataset. For the four types of airborne hazard, the EUNADICS-AV EWS has demonstrated its capability to provide NRT alert data products to trigger data assimilation and dispersion modelling providing forecasts and inverse modelling for source term estimate. Not all of our alert data products (NCAP files) are publicly disseminated. Access to our alert products is currently restricted to key users (i.e. Volcanic Ash Advisory Centres, national meteorological services, the World Meteorological Organization, governments, volcano observatories and research collaborators), as these are considered pre-decisional products. On the other hand, thanks to the EUNADICS-AV–SACS (Support to Aviation Control Service) web interface (https: //sacs.aeronomie.be, last access: 5 November 2021), the main part of the satellite observations used by the EUNADICS-AV EWS is shown in NRT, with public email notification of volcanic emission and delivery of tailored images and NCAP files. All of the ATM stakeholders (e.g. pilots, airlines and passengers) can access these alert products through this free channel.
      522  63
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Surveying volcanic crises exercises: From open-question questionnaires to a prototype checklist

    Volcanic crisis exercises are usually run to test response capabilities, communication protocols, and decision-making procedures by agencies with responsibilities to cope with scenarios of volcanic unrest with inherent uncertainty, such as volcano observatories and/or civil protection authorities. During the last decades, the use of questionnaires has been increased to evaluate people’s knowledge on volcanic hazards and their perception of risk, to better understand their preparedness to respond to emergency measures plans. In this paper, we present a study carried out within the European Network of Observatories and Research Infrastructures for Volcanology project (EUROVOLC) focused on extracting information on the experience gained during volcanic-crisis exercises by the project’s participants and beyond. An open-ended question questionnaire was firstly distributed for a survey within the project community. Through the results obtained, we developed a user-friendly online multi-choice questionnaire that was submitted to the volcanological communities within and outside EUROVOLC. Analyzing the answers to the online questionnaire, we extracted a prototype checklist for guiding the design of such exercises in the future. Our results confirm this type of survey as a very useful tool for gathering information on participants’ experience and knowledge, able to understand which data and information may be useful when designing exercises for scientists, emergency managers and decision makers. In particular, the main lessons learnt regard the need i) to increase training activities involving people exposed to volcanic hazards and media, ii) to improve external communication tools (between players and public/media), equipment and protocols and iii) to better define decision-makers’ needs.
      51  52
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Developing an Event Tree for probabilistic hazard and risk assessment at Vesuvius

    Probabilistic characterizations of possible future eruptive scenarios at Vesuvius volcano are elaborated and organized within a risk-based framework. In the EXPLORIS project, a wide variety of topics relating to this basic problem have been pursued: updates of historical data, reinterpretation of previous geological field data and the collection of new fieldwork results, the development of novel numerical modelling codes and of risk assessment techniques have all been completed. To achieve coherence, many diverse strands of evidence had to be unified within a formalised structure, and linked together by expert knowledge. For this purpose, a Vesuvius ‘Event Tree’ (ET) was created to summarise in a numerical-graphical form, at different levels of detail, all the relative likelihoods relating to the genesis and style of eruption, development and nature of volcanic hazards, and the probabilities of occurrence of different volcanic risks in the next eruption crisis. The Event Tree formulation provides a logical pathway connecting generic probabilistic hazard assessment to quantitative risk evaluation. In order to achieve a complete parameterization for this all-inclusive approach, exhaustive hazard and risk models were needed, quantified with comprehensive uncertainty distributions for all factors involved, rather than simple ‘best-estimate’ or nominal values. Thus, a structured expert elicitation procedure was implemented to complement more traditional data analysis and interpretative approaches. The structure of the Vesuvius Event Tree is presented, and some of the data analysis findings and elicitation outcomes that have provided initial indicative probability distributions to be associated with each of its branches are summarized. The Event Tree extends from initiating volcanic eruption events and hazards right through to human impact and infrastructure consequences, with the complete tree and its parameterisation forming a quantitative synoptic framework for comprehensive hazard evaluation and mapping of risk impacts. The organization of the Event Tree allows easy updating, as and when new information becomes available
      342  50
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    2021–2023 Unrest and Geodetic Observations at Askja Volcano, Iceland

    Unrest began in July 2021 at Askja volcano in the Northern Volcanic Zone (NVZ) of Iceland. Its most recent eruption, in 1961, was predominantly effusive and produced ∼0.1 km3 lava field. The last plinian eruption at Askja occurred in 1875. Geodetic measurements between 1983 and 2021 detail subsidence of Askja, decaying in an exponential manner. At the end of July 2021, inflation was detected at Askja volcano, from GNSS observations and Sentinel‐1 interferograms. The inflationary episode can be divided into two periods from the onset of inflation until September 2023. An initial period until 20 September 2021 when geodetic models suggest transfer of magma (or magmatic fluids) from within the shallowest part of the magmatic system (comprising an inflating and deflating source), potentially involving silicic magma. A following period when one source of pressure increase at shallow depth can explain the observations.
      225  128
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Observations and Retrievals of Volcanic Ash Clouds Using Ground- and Satellite-Based Sensors

    This work was born from a wish of remembering the fundamental contribution of Prof. Frank Silvio Marzano to the field of physical volcanology. In fact, for the last fifteen years and in the context of several European projects, Prof. Marzano collaborated with many volcanologists as well as scientists from different fields and wrote many scientific articles aimed at studying the dynamics of explosive eruptions. He left his imprinting in this research sector laying the foundations of radar volcanology in Italy, and extended his studies to other sensors. His work is relevant for the analysis of the main eruption source parameters needed to characterize the eruptive events. Here we show how remote sensing instruments applied to analyze explosive activity of different volcanoes worldwide, are going to increase the knowledge in this multidisciplinary research area and the awareness from the scientific community of the potential of these sensors at various wavelengths.
      88  2