Sigmundsson, Freysteinn
Preferred name
Sigmundsson, Freysteinn
Web Site
ORCID
5 results
Filters
Settings
The search returned 5 results
Now showing 1 - 5 of 5
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Seasonal ground deformation at subglacial Katla Volcano, Iceland: observations and models
(Lausann : Frontiers Media S.A., 2013-, 2026-01-20) ;O'hara, Catherine; ;Magnússon, Eyjólfur ;Albino, FabienChanges at the surface of a volcanic edifice, such as snow or hydrological loading, ice cap melting, and flank destabilization, can cause significant surface deformation. Understanding the contribution of surface processes to ground deformation is therefore important for monitoring the state of the underlying volcanic system. The Katla Volcano in Iceland lies under Mýrdalsjökull, the fourth largest glacier in Iceland, and undergoes the largest seasonal deformation of all Icelandic volcanoes: up to 4 cm horizontally and 3 cm vertically at the Austmannsbunga (AUST) Global Navigation Satellite System (GNSS) station. The last confirmed eruption of Katla occurred in 1918. Since then, episodes of elevated seismicity and jökulhlaups (sudden glacial outburst floods) have been recorded at the volcano, the most noticeable in 1955, 1999, 2011, and 2024. During the 2024 jökulhlaup, horizontal displacement of up to 7 cm was recorded at AUST. In this work, elastic three-dimensional finite element method models were implemented to quantify surface deformation from seasonal load changes. The models include realistic bedrock topography and ice unloading based on recent data collected at Mýrdalsjökull. A deformation model considering only seasonal snow unloading can reproduce within uncertainty the observed GNSS vertical surface displacements. It can also explain the horizontal signals at GNSS stations located outside the glacier, although not at GNSS stations located on nunataks inside Mýrdalsjökull. An additional deformation source must be considered to explain the residual cm-scale horizontal displacement at these stations. We model the residual signal using a thermo-poro-elastic cylindrical source. The best-fit source is a cylinder located at the surface that produces cm-scale horizontal deformation with limited vertical deformation. The shallow source depth derived from the inversion and the surface deformation recorded at AUST during the jökulhlaup series in 2024 and 2025 suggests that seasonal deformation is not strictly related to magmatic activity. We infer that changes within the hydrologic system of the glacier are responsible for most of the horizontal deformation at Katla.4 9 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , 2021–2023 Unrest and Geodetic Observations at Askja Volcano, Iceland
Unrest began in July 2021 at Askja volcano in the Northern Volcanic Zone (NVZ) of Iceland. Its most recent eruption, in 1961, was predominantly effusive and produced ∼0.1 km3 lava field. The last plinian eruption at Askja occurred in 1875. Geodetic measurements between 1983 and 2021 detail subsidence of Askja, decaying in an exponential manner. At the end of July 2021, inflation was detected at Askja volcano, from GNSS observations and Sentinel‐1 interferograms. The inflationary episode can be divided into two periods from the onset of inflation until September 2023. An initial period until 20 September 2021 when geodetic models suggest transfer of magma (or magmatic fluids) from within the shallowest part of the magmatic system (comprising an inflating and deflating source), potentially involving silicic magma. A following period when one source of pressure increase at shallow depth can explain the observations.225 128 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Electrical resistivity tomography and time-domain induced polarization field investigations of geothermal areas at Krafla, Iceland: comparison to borehole and laboratory frequency-domain electrical observations
Interaction of H2S and basaltic rocks in volcanic geothermal areas can originate from natural up-flow of magmatic fluids or H2S artificial re-injection in relation to geothermal exploitation, both causing pyrite mineralization. We study the possibility to track these processes with electrical impedance field measurements. Electrical Resistivity Tomography (ERT) and Time-Domain Induced Polarization (TDIP) measurements were performed along thirteen 1.24 km long profiles, at three different sites around the eastern caldera rim of the Krafla caldera: (i) a ‘cold altered’ site affected by past hydrothermal circulations, (ii) a hot active site and (iii) a ‘cold un-altered’ site, unaffected by hydrothermal circulations. We present 2-D inversions of direct current (DC) resistivity, maximum phase angle of the electrical impedance (MPA) and relaxation time. The maximum depth of investigation for the MPA is 200 m, obtained in zones of high resistivity, corresponding to fresh and recent unaltered basalt. At the hot and cold altered sites, the field resistivities are compared to in situ borehole logs and laboratory complex resistivity measurements on rock samples from the boreholes. The laboratory complex resistivity was measured at six different pore water conductivities, ranging from 0.02 to 5 S m−1, and frequency in the range 10−2 − 106 Hz. The time-range investigated in our field TDIP measurements was approximately 0.01–8 s.At the cold altered site, the inverted resistivity is consistent with both borehole observations and laboratory measurements. At the hot site, resistivity from field inversion and borehole logs are consistent. Comparing inversion results and borehole logs to laboratory resistivity measured on core samples at room temperature reveals that a correction coefficient for the effect of temperature on resistivity of 6 per cent per °C is appropriate at investigated depths. This exceptionally high temperature correction coefficient suggests a dominant influence of interface and interfoliar conduction, characteristic of smectite-rich rocks, compared to electrolyte conduction. High MPA is attributed to the presence of pyrite at the hot site and of iron-oxides at the cold unaltered site, through joint consideration of MPA together with DC resistivity and relaxation time. TDIP measurements offer the possibility to detect the presence of metallic minerals at shallow depth and distinguish between pyrite and iron-oxides. The abundance of highly conductive smectite in altered volcanic rocks represents a challenge for resolving IP parameters, because the low resistivity created by abundant smectite limits the data quality of the measured voltage discharge.258 132 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , From magma ascent to ash generation: investigating volcanic conduit processes by integrating experiments, numerical modeling, and observations
Processes occurring in volcanic conduits, the pathways through which magma travels from its storage region to the surface, have a fundamental control on the nature of eruptions and associated phenomena. It has been well established that magma flows, crystallizes, degasses, and fragments in conduits, that fluids migrate in and out of conduits, and that seismic and acoustic waves are generated and travel within conduits. A better understanding of volcanic conduits and related processes is of paramount importance for improving eruption forecasting, volcanic hazard assessment and risk mitigation. However, despite escalating advances in the characterization of individual conduit processes, our understanding of their mutual interactions and the consequent control on volcanic activity is still limited. With the purpose of addressing this topic, a multidisciplinary workshop led by a group of international scientists was hosted from 25 to 27 October 2014 by the Pisa branch of the Istituto Nazionale di Geofisica e Vulcanologia under the sponsorship of the MeMoVolc Research Networking Programme of the European Science Foundation. The workshop brought together the experimental, theoretical, and observational communities devoted to volcanological research. After 3 days of oral and poster presentations, breakout sessions, and plenary discussions, the participants identified three main outstanding issues common to experimental, analytical, numerical, and observational volcanology: unsteadiness (or transience), disequilibrium, and uncertainty. A key outcome of the workshop was to identify the specific knowledge areas in which exchange of information among the subdisciplines would lead to efficient progress in addressing these three main outstanding issues. It was clear that multidisciplinary collaboration of this sort is essential for progressing the state of the art in understanding of conduit magma dynamics and eruption behavior. This holistic approach has the ultimate aim to deliver fundamental improvements in understanding the underlying processes generating and controlling volcanic activity.1096 123 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Contribution of the EVER-EST project to the community of the Geohazard Supersites initiative
The EVER-EST project (European Virtual Environment for Research - Earth Science Themes: a solution) is a H2020 project (2015-2018) aimed at the creation of a Virtual Research Environment (VRE) focused on the requirements of the Earth Science community. The VRE is intended to enhance the ability to collaborate, interoperate and share knowledge and experience between all relevant stakeholders, including researchers, monitoring teams and civil protection agencies. Among the innovations of the project is the exploitation of the “Research Object” concept.181 181
