Murphy, Shane
Preferred name
Murphy, Shane
ORCID
25 results
Filters
Settings
The search returned 25 results
Now showing 1 - 10 of 25
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Crustal structure of the Ionian basin and eastern Sicily margin: results from a wide-angle seismic survey
In the Ionian Sea (Central Mediterranean) the slow convergence between Africa and Eurasia results in the formation of a narrow subduction zone. The nature of the crust of the subducting plate remains debated and could represent the last remnants of the Neo-Tethys ocean. The origin of the Ionian basin is also under discussion, especially concerning the rifting mechanisms as the Malta Escarpment could represent a remnant of this opening. This subduction retreat toward the south-east (motion occurring since the last 35 Ma) but is confined to the narrow Ionian Basin. A major lateral slab tear fault is required to accommodate the slab roll-back. This fault is thought to propagate along the eastern Sicily margin but its precise location remains controversial. This study focuses on the deep crustal structure of the Eastern-Sicily margin and the Malta Escarpment. We present two two-dimensional P-wave velocity models obtained from forward modeling of wide-angle seismic data acquired onboard the R/V Meteor during the DIONYSUS cruise in 2014. The results image an oceanic crust within the Ionian basin as well as the deep structure of the Malta Escarpment, which presents characteristics of a transform margin. A deep and asymmetrical sedimentary basin is imaged south of the Messina strait and seems to have opened between the Calabrian and Peloritan continental terranes. The interpretation of the velocity models suggests that the tear fault is located east of the Malta Escarpment, along the Alfeo fault system (AFS).933 410 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Reply to Comment by A. Argnani on “Geometry of the Deep Calabrian Subduction From Wide‐Angle Seismic Data and 3‐D Gravity Modeling”
Andrea Argnani in his comment on Dellong et al. (2020, https://doi.org/10.1029/2019gc008586) (Geometry of the deep Calabrian subduction (Central Mediterranean Sea) from wide‐angle seismic data and 3‐D gravity modeling) proposes an alternate interpretation of the wide‐angle seismic velocity models presented by Dellong et al. (2018, https://doi.org/10.1002/2017JB015312) and Dellong et al. (2020) and proposes a correction of the literature citations in these paper. In this reply, we discuss in detail all points raised by Andrea Argnani.743 77 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , NEAMTHM18 Documentation: the making of the TSUMAPS-NEAM Tsunami Hazard Model 2018
(2019-09-12); ; ; ; The NEAM Tsunami Hazard Model 2018 (NEAMTHM18) is a probabilistic hazard model for tsunamis generated by earthquakes. It covers the coastlines of the North-East Atlantic, the Mediterranean, and connected Seas (NEAM). In this online data product, the hazard results are provided by hazard curves calculated at 2,343 Points of Interest (POI), distributed in the North-East Atlantic (1,076 POIs), the Mediterranean Sea (1,130 POIs), and the Black Sea (137 POIs) at an average spacing of ~20 km. For each POI, hazard curves are given for the mean, 2nd, 16th, 50th, 84th, and 98th percentiles. Maps derived from hazard curves are Probability maps for Maximum Inundation Heights (MIH) of 1, 2, 5, 10, 20 meters; Hazard maps for Average Return Periods (ARP) of 500, 1,000, 2,500, 5,000, 10,000 years. For each map, precalculated displays are provided for the mean, the 16th percentile, and the 84th percentile. All data are also made accessible through an interactive web mapper and through Open Geospatial Consortium standard protocols. The model was prepared in the framework of the European Project TSUMAPS-NEAM (http://www.tsumaps-neam.eu/) funded by the mechanism of the European Civil Protection and Humanitarian Aid Operations (grant no. ECHO/SUB/2015/718568/PREV26).383 615 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Shallow slip amplification and enhanced tsunami hazard unravelled by dynamic simulations of mega-thrust earthquakes
(2016-10-11); ; ; ; The 2011 Tohoku earthquake produced an unexpected large amount of shallow slip greatly contributing to the ensuing tsunami. How frequent are such events? How can they be efficiently modelled for tsunami hazard? Stochastic slip models, which can be computed rapidly, are used to explore the natural slip variability; however, they generally do not deal specifically with shallow slip features. We study the systematic depth-dependence of slip along a thrust fault with a number of 2D dynamic simulations using stochastic shear stress distributions and a geometry based on the cross section of the Tohoku fault. We obtain a probability density for the slip distribution, which varies both with depth, earthquake size and whether the rupture breaks the surface. We propose a method to modify stochastic slip distributions according to this dynamically-derived probability distribution. This method may be efficiently applied to produce large numbers of heterogeneous slip distributions for probabilistic tsunami hazard analysis. Using numerous M9 earthquake scenarios, we demonstrate that incorporating the dynamically-derived probability distribution does enhance the conditional probability of exceedance of maximum estimated tsunami wave heights along the Japanese coast. This technique for integrating dynamic features in stochastic models can be extended to any subduction zone and faulting style.1437 335 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , An Alternative View of the Microseismicity along the Western Main Marmara Fault
A detailed study, based on ocean-bottom seismometers (OBSs) recordings from two recording periods (3.5 months in 2011 and 2 months in 2014) and on a high-resolution, 3D velocity model, is presented here, which provides an alternative view of the microseismicity along the submerged section of the North Anatolian fault (NAF) within the western Sea of Marmara (SoM). The nonlinear probabilistic software packages of NonLinLoc and NLDiffLoc were used for locating earthquakes. Only earthquakes that comply with the following location criteria (e.g., representing 20% of the total amount of events) were considered for analysis: (1) number of stations ≥ 5; (2) number of phases ≥ 6, including both P and S; (3) root mean square (rms) location error ≤ 0:5 s; and (4) azimuthal gap ≤ 180°. P and S travel times suggest that there are strong velocity anomalies along the Western High, with low Vp, low Vs, and ultra-high Vp=Vs in areas where mud volcanoes and gas-prone sediment layers are known to be present. The location results indicate that not all earthquakes occurred as strike-slip events at crustal depths (> 8 km) along the axis of the Main Marmara fault (MMF). In contrast, the following features were observed: (1) a significant number of earthquakes occurred off-axis (e.g., 24%), with predominantly normal focal mechanisms, at depths between 2 and 6 km, along tectonically active, structural trends oriented east–west or southwest–northeast, and (2) a great number of earthquakes was also found to occur within the upper sediment layers (at depths < 2 km), particularly in the areas where free gas is suspected to exist, based on high-resolution 3D seismics (e.g., 28%). Part of this ultra-shallow seismicity appears to occur in response to deep earthquakes of intermediate (ML ∼ 4–5) magnitude. Resolving the depth of the shallow seismicity requires adequate experimental design ensuring source–receiver distances of the same order as hypocentral depths. To reach this objective, deep-seafloor observatories with a sufficient number of geophone sensors near the fault trace are needed.202 7 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Le attività del gruppo operativo INGV "SISMIKO" durante la sequenza sismica "Amatrice 2016",
(2016-11-22); ; ; ; SISMIKO è un gruppo operativo dell’Istituto Nazionale di Geofisica e Vulcanologia (INGV) che coordina tutte le Reti Sismiche Mobili INGV356 151 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Probabilistic Tsunami Hazard and Risk Analysis: A Review of Research Gaps
Tsunamis are unpredictable and infrequent but potentially large impact natural disasters. To prepare, mitigate and prevent losses from tsunamis, probabilistic hazard and risk analysis methods have been developed and have proved useful. However, large gaps and uncertainties still exist and many steps in the assessment methods lack information, theoretical foundation, or commonly accepted methods. Moreover, applied methods have very different levels of maturity, from already advanced probabilistic tsunami hazard analysis for earthquake sources, to less mature probabilistic risk analysis. In this review we give an overview of the current state of probabilistic tsunami hazard and risk analysis. Identifying research gaps, we offer suggestions for future research directions. An extensive literature list allows for branching into diverse aspects of this scientific approach.515 230 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Rapporto Preliminare Sulle Attività Svolte Nel Primo Mese Di Emergenza Dal Gruppo Operativo Sismiko A Seguito Del Terremoto Di Amatrice Mw 6.0 (24 Agosto 2016, Italia Centrale)
Sintesi delle attività svolte dal coordinamento delle reti sismiche mobili INGV in emergenza, denominato SISMIKO, nel primo mese della sequenza sismica “Amatrice” seguita al terremoto di Mw 6.0 del 24 agosto 2016 (01:36 UTC). Descrizione della rete sismica implementata e prime analisi dei dati acquisiti. Report on the activities in the first month of emergency by coordination of mobile seismic networks INGV emergency, called SISMIKO, after the Mw 6.0 Amatrice earthquake (August 24th, 2016, central italy). Description of the temporary seismic network implemented and preliminary analysis of the acquired data.366 173 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Geometry of the deep Calabrian subduction (Central Mediterranean Sea) from wide‐angle seismic data and 3‐D gravity modeling
The Calabrian subduction zone is one of the narrowest arcs on Earth and a key area to understand the geodynamic evolution of the Mediterranean and other marginal seas. Here in the Ionian Sea, the African plate subducts beneath Eurasia. Imaging the boundary between the downgoing slab and the upper plate along the Calabrian subduction zone is important for assessing the potential of the subduction zone to generate mega‐thrust earthquakes and was the main objective of this study. Here we present and analyze the results from a 380 km long, wide‐angle seismic profile spanning the complete subduction zone, from the deep Ionian Basin and the accretionary wedge to NE Sicily, with additional constraints offered by 3‐D Gravity modeling and the analysis of earthquake hypocenters. The velocity model for the wide‐angle seismic profile images thin oceanic crust throughout the basin.1256 122 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Optimal time alignment of tide-gauge tsunami waveforms in nonlinear inversions: Application to the 2015 Illapel (Chile) earthquake
Tsunami waveform inversion is often used to retrieve information about the causative seismic tsunami source. Tide gauges record tsunamis routinely; however, compared to deep-ocean sensor data, tide-gauge waveform modeling is more difficult due to coarse/inaccurate local bathymetric models resulting in a time mismatch between observed and predicted waveforms. This can affect the retrieved tsunami source model, thus limiting the use of tide-gauge data. A method for nonlinear inversion with an automatic optimal time alignment (OTA), calculated by including a time shift parameter in the cost function, is presented. The effectiveness of the method is demonstrated through a series of synthetic tests and is applied as part of a joint inversion with interferometric synthetic aperture radar data for the slip distribution of the 2015 Mw 8.3 Illapel earthquake. The results show that without OTA, the resolution on the slip model degrades significantly and that using this method for a real case strongly affects the retrieved slip pattern.259 166
