Skip to main content
The search returned 14 results
Now showing 1 - 10 of 14
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Site effect estimation through site characterization from ambient noise recordings,

    Site effect assessment is an important step in seismic risk mitigation. There is therefore a drastic need for co proxies to site effects estimates. In that context, a new promising approach was proposed, using the time-avera over the top z meters with z varying form 5, 10, 20 and 30 meters (Vsz) and the fundamental resonance frequen two-parameters characterization of a site. Then to assess site effect, a Site Amplification Prediction Equat completely defined by these two parameters was build-up based on Japanese data from the KiK-Net network. Thu to be validated using other dataset. For that aim the EUROSEIS-test data is a suitable one. The EUROSE sedimentary basin in northern-Greece that has been thoroughly investigated through grants from the European C mainly to study site effects. Fourteen accelerometric stations have been installed since 1995, that to date recorded 100 events. After a review of the main available information over the EUROSEIS-test, we end up with a poor Vs for some of the accelerometric stations. Thus eight accelerometric stations were selected for noise array me surveys to provide more details information about Vsz and f0 parameters. The noise array technique has been pro decades ago but its development is still in progress, particularly regarding the inversion step. Different approaches el al. 2009, Renalier et al. 2009) were tested in this study to provide Vsz. These two inversion strategies provide Vsz for z equals to 10, 20 and 30 meters. With the resulting Vsz and f0 from noise analysis, a validation-test of th SAPE was realized. The results of such a comparison are encouraging and indicate as well limitations of the SAP It is a promising tool for engineering and seismic risk management.
      136  221
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Influence of instruments on the H/V spectral ratios of ambient vibrations

    For an optimal analysis of the H/V curve, it appears necessary to check the instrument signal to noise ratio in the studied frequency band, to ensure that the signal from the ground noise is well above the internal noise. We assess the reliability and accuracy of various digitizers, sensors and/or digitizer-sensor couples. Although this study is of general interest for any kind of seismological study, we emphasize the influence of equipment on H/V analysis results. To display the impact of the instrumental part on the H/V behavior, some series of tests have been carried out following a step-by-step procedure: first, the digitizers have been tested in the lab (sensitivity, internal noise...), then the three components sensors, still in the lab, and finally the usual user digitizers-sensors couple in lab and outdoors. In general, the digitizer characteristics, verified during this test, correspond well to the manufacturer specifications, however, depending on the digitizer, the quality of the digitized waveform can be very good to very poor, with variation from a channel to another channel (gain, time difference etc.). It appears very clearly that digitizers need a warming up time before the recording to avoid problems in the low-frequency range. Regarding the sensors, we recommend strongly to avoid the use of “classical” accelerometers (i.e., usual force balance technology). The majority of tested seismometers (broadband and short period, even 4.5 Hz) can be used without problems from 0.4 to 25 Hz. In all cases, the instrumentation should be checked first to verify that it works well for the defined study aim, but also to define its limit of use (frequency, sensitivity...).
      174  21
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Derivation of Vs30 f rom dispersion curve: skipping the inversion step?

    In the framework of the EU-NERIES project, 20 sites among all European strong motion sites in Italy, Greece, T urkey and France were selected to be representative of most common soil classes, and for which shear-wave velocities from borehole measurements (cross-hole and down-hole tests) are available. Passive (array noise) and active experiments have been carried out at these sites in order to evaluate the ability of surface waves technique to provide reliable estimates of shear-wave velocity profiles. In order to stay cheap and feasible, active seismic experiments involving 24 geophones and hammer source were carried out at all sites. Data were processed by using the MASW technique and Rayleigh and Love waves dispersion curves were retrieved from 5-10 Hz to 30-50 Hz. Passive array experiments were also performed by using 8 seismological stations linked with wireless connections and monitored with near real-time processing. Combining up to four different arrays with aperture ranging from 10 m and to 900 m, Rayleigh and Love waves dispersion curves were derived over a broad frequency range (from 0.5 Hz up to 45 Hz) by using the FK and MSPAC techniques. At about 75% sites, dispersion curves from ambient vibration and MASW are in good agreement over the overlapping frequency band. T he other 25% sites correspond to complex geometrical site structures. Whatever the site, passive experiments are shown to be very suitable to retrieve accurate estimates of phase velocities at high frequency (over 20-30 Hz). T his experiment also clearly outlined the limited penetration depth (comprised between 15 and 25 m) of the MASW technique. Inversion of dispersion curves to derive shear-wave profiles and EC8 site class (which is mainly based on Vs30) is a difficult and highly debated issue. Here we test an alternative to get average shear-wave profiles and especially Vs30 from the dispersion curves only. For these 20 sites, we show that site classes may be estimated directly from the dispersion curves. T heses results are confirmed by an extensive study involving about 800 velocity profiles from real sites.
      268  264
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Geopsy: A User-Friendly Open-Source Tool Set for Ambient Vibration Processing

    Ambient vibrations are nowadays considerably used worldwide for numerous types of engineering applications and scientific research. Geopsy and its companion tools are part of that landscape. Since the first release of the program package in 2005, as outcome of the European Union project Site Effects aSsessment from AMbient noisE, Geopsy has become a mature multiplatform open-source package (released under GNU Public License version 3) that has already been recognized as a reference tool for analyzing ambient vibration data in the context of site characterization studies. The community of users has grown from a core group of researchers up to thousands of seismologists and engineers on every career level and on all continents. The versatility of geopsy allows for the processing of all kinds of data needed in site characterization studies, that is, from single station single trace to three-component array recordings. In all of the aforementioned cases, the steps from field acquisition to the production of publication-ready figures are covered and supported by user-friendly graphical user interfaces or corresponding command-line tools for the automation of the complete processing chain. To avoid black-box usage, a number of lower-level tools guarantee maximum flexibility in accessing and controlling processing results at any stage of the analysis
      295  5
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Exploring the model space and ranking a best class of models in surface- wave dispersion inversion: Application at European strong-motion sites

    The inversion of surface-wave dispersion curve to derive shear-wave velocity profile is a very delicate process dealing with a non-unique problem, which is strongly dependent on the model space parameterization. When independent and reliable information are not available, the selection of most representative models within the ensemble produced by the inversion is often difficult. We present a strategy in the inversion of dispersion curves able to investigate the influence of the parameterization of the model space, and to select a ‘’best’’ class of models. We analyze surface-wave dispersion curves measured at 14 European strong-motion sites within the EC-project NERIES. We focus on the inversion task exploring the model space by means of four distinct parameterization classes composed of layers progressively added over a half-space. The classes differ in the definition of the shear-wave velocity profile; we consider models with uniform velocity as well as models with increasing velocity with depth. At each site and for each model parameterization, we perform an extensive surface-wave inversion (200100 models for 5 seeds) using the conditional neighbourhood algorithm. We address the model evaluation following the corrected Akaike’s Information Criterion (AICc) which combines the concept of misfit to the number of degrees of freedom (dof) of the system. The misfit is computed as least-squares estimation between theoretical and observed dispersion curve. The model complexity is accounted in a penalty term by AICc. By applying such inversion strategy on 14 strong-motion sites, we find that the best parameterization of the model space is mostly 3-4 layers over a half-space; where the shear-wave velocity of the uppermost layers can follow uniform or power-law dependence with depth. The shear-wave velocity profiles derived by inversion agree with shear-wave velocity profiles provided by borehole surveys at approximately 80% of the sites.
      166  38
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Seismic array analysis of Tornillo-like signals recorded in Tuscany

    With the scientific purpose to monitor the micro-seismicity in the Central Apennines, we recently deployed in Eastern Tuscany (Casentino) a temporary 12 element seismic array, composed exclusively of 3-component seismometers. During the one month of registration we recorded an unexpected high rate of local micro-seismicity with up to 180 events per day.
      112  215
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Sesame Project - Deliverable D01-02 - WP02: Controlled Instrumental Specifications - Final report of the Instrument Workshop 22-26 October 2001, University of Bergen, Norway

    In the following we report the preliminary results from a workshop arranged at the Institute of Solid Earth Physics, University of Bergen, in the period 22-26 October 2001 in Bergen, Norway. The workshop was arranged under the framework of the SESAME Project (Site Effects Assessment Using Ambient Excitations, EC-RGD, Project No. EVG1-CT-2000-00026 SESAME), Task A (H/V technique), Work Package 02 (WP02 – Experimental conditions).
      219  714
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Guidelines for the good practice of surface wave analysis: a product of the InterPACIFIC project

    Surface wave methods gained in the past decades a primary role in many seismic projects. Specifically, they are often used to retrieve a 1D shear wave velocity model or to estimate the VS,30 at a site. The complexity of the interpretation process and the variety of possible approaches to surface wave analysis make it very hard to set a fixed standard to assure quality and reliability of the results. The present guidelines provide practical information on the acquisition and analysis of surface wave data by giving some basic principles and specific suggestions related to the most common situations. They are primarily targeted to non-expert users approaching surface wave testing, but can be useful to specialists in the field as a general reference. The guidelines are based on the experience gained within the InterPACIFIC project and on the expertise of the participants in acquisition and analysis of surface wave data.
      203  5
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Ambient vibration measurements in the Southern Rhine Graben close to Basle

    This study presents results of ambient noise measurements from temporary single station and small-scale array deployments in the northeast of Basle. H/V spectral ratios were determined along various profiles crossing the eastern masterfault of the Rhine Rift Valley and the adjacent sedimentary rift fills. The fundamental H/V peak frequencies are decreasing along the profile towards the eastern direction being consistent with the dip of the tertiary sediments within the rift. Using existing empirical relationships between H/V frequency peaks and the depth of the dominant seismic contrast, derived on basis of the ?/4-resonance hypothesis and a power law depth dependence of the S-wave velocity, we obtain thicknesses of the rift fill from about 155 m in the west to 280 m in the east. This is in agreement with previous studies. The array analysis of the ambient noise wavefield yielded a stable dispersion relation consistent with Rayleigh wave propagation velocities. We conclude that a significant amount of surface waves is contained in the observed wavefield. The computed ellipticity for fundamental mode Rayleigh waves for the velocity depth models used for the estimation of the sediment thicknesses is in agreement with the observed H/V spectra over a large frequency band.
      218  257
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Deriving Wavefield Characteristics and Shear-Velocity Profiles from Two-Dimensional Small-Aperture Arrays Analysis of Ambient Vibrations in a Small-Size Alluvial Basin, Colfiorito, Itaky

    We analyze the dispersion characteristics of ambient noise vibrations. For this purpose, two-dimensional (2D) seismic array data were acquired in four different sites in the Colfiorito plain, an alluvial intramountain basin that exhibits strong site effects. Assuming seismic noise being mainly composed of surface waves, we derive one-dimensional (1D) shallow shear-velocity profiles through the inversion of dispersion curves measured by frequency–wavenumber (f-k) methods. The inverted shear-wave velocity profiles are consistent with a priori information for those sites that can be approximated by 1D simple models. In these cases, the use of passive records of seismic vibrations can be a valuable tool for determining the shallow velocity profile if a detailed depiction of velocity structure is not required. The theoretical dispersion curves for Rayleigh and Love waves were compared with the measured dispersion curves for vertical and horizontal components, respectively. This allows us to discuss qualitatively the composition of ambient vibrations (outlining a large proportion of Love waves in the noise wave field) and the effects of higher modes. We also use the single-station method for investigating the origin of the horizontal-to-vertical (H/V) peak in the plain of Colfiorito in terms of ellipticity of the fundamental Rayleigh mode.
      190  33