Skip to main content
The search returned 4 results
Now showing 1 - 4 of 4
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Non-Ergodic Probabilistic Seismic Hazard Methodology Using Physics-Based Ground Motion Prediction: the Case of L'Aquila, Italy

    A non-ergodic probabilistic seismic hazard analysis (PSHA) utilizing the physics-based ground motion prediction was proposed in this study to minimize the increasing uncertaintiesin the use of empirical equations. The City of L’Aquila in Italy was used for illustrative purposes due to the availability of data and the historical seismicity of the site. A total of 28 seismic sources were identified in this study located within a 100 km radius from the city. Fault properties such as geometry and location were obtained from the literature, while the fault occurrence rates were obtained using the FiSH Code. A modified time-weakening friction law was proposed to model the seismic energy released by an earthquake. Uncertainties in different rupture scenarios were characterized through the Guttenberg-Richter Relations and the Characteristic Brownian Time Passage. Uncertainties in distances were characterized through probability mass functions, which were used to calculate the ground motion exceedance probabilities. The 1D elastodynamic equation coupled with the Hooke’s law was used to predict the peak ground acceleration (PGA), a measure of the ground shaking level. A hazard curve, which is a plot of PGA and its recurrence, was constructed and compared with the results of the study of Valentini, et al., AGU 100: Advancing Earth and Space Science (2019). The method proposed in this study predicts a higher hazard rates for PGAs less than 0.70 g, which implies that the ground motion was overestimated for very far sources. In contrast, lower hazard curves were observed for PGAs greater than 0.70g which can be attributed to fewer seismic sources considered in this study.
      169  115
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Stationary solutions to a hybrid viscous hydrodynamic model with classical boundaries †

    (American Institute of Mathematical Sciences (AIMS), 2024-09-12) ; ;
    Sampalmieri, Rosella
    ;
    Stiepanova, Kateryna
    ;
    In this paper we present a quantum-classical hybrid model based on the hydrodynamic equations in steady state form. The approach presented here, which has already been proposed in previous works, consists in considering an intrinsically hybrid version of the Bohm potential, which acts only in the region of the domain where quantum effects play an important role, while it disappears where the quantum contribution is essentially negligible and the operation of the device can be well described by using a classical model. Compared to previous results from the same line of research, here we assume that the device at the boundaries of the domain behaves classically, while quantum effects are localised in the central part of it. This is the case of greatest scientific interest, since, in real devices, quantum effects are generally localized in a small area within the device itself. The well posedness of the problem is ensured by adding a viscous term necessary for the convergence of the hybrid limit to an appropriate weak solution. Some numerical tests are also performed for different values of the viscous coefficient, in order to evaluate the effects of the viscosity, especially on the boundaries of the device.
      18  32
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Shape effects on wave propagation in a 2D domain using the finite element method

    (Mathematical Sciences Publishers, 2024-10-22) ;
    Styahar, Andriy
    ;
    ; ;
    Seismic wave propagation is influenced by any discontinuity in the mechanical properties of the propagation medium such as alluvial basins, fault zones and cavities. There are several interesting results in the literature concerning both the 3D and the 2D simplified cases. Many of the currently available results refer to the wave propagation in a vertical section of the 3D domain. On the contrary just few works account for the shape effects of the geological structures on a horizontal slice of the earth surface or on the surface itself, where the earthquake has a devastating effect on buildings and infrastructures. Therefore, in this paper we delve into the impact of a curved interface on wave propagation within a horizontal plane, revealing its role akin to an optical diopter, either focusing or defocusing seismic energy.
      6
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Spectral elements numerical simulation of the 2009 L’Aquila earthquake on a detailed reconstructed domain

    In this paper we simulate the earthquake that hit the city of L'Aquila on the 6th of April 2009 using SPEED (SPectral Elements in Elastodynamics with Discontinuous Galerkin), an open-source code able to simulate the propagation of seismic waves in complex three-dimensional (3D) domains. Our model includes an accurate 3D recon- struction of the Quaternary deposits, according to the most up-to-date data obtained from the Microzonation studies in Central Italy and a detailed model of the topography incorporated using a newly developed tool (May et al. 2021). The sensitivity of our results with respect to dfferent kinematic seismic sources is inves- tigated. The results obtained are in good agreement with the recordings at the available seismic stations at epicentral distances within a range of 20km. Finally, a blind source prediction scenario application shows a reasonably good agreement between simulations and recordings can be obtained by simulating stochastic rupture realizations with basic input data. These results, although limited to nine simulated scenarios, demonstrate that it is possible to obtain a satisfactory reconstruction of a ground shaking scenario employing a stochastic source constrained on a limited amount of ex-ante information. A similar approach can be used to model future and past earthquakes for which little or no information is typically available, with potential relevant implications for seismic risk assessment.
      123  101