Marotta, Anna Maria
Preferred name
Marotta, Anna Maria
Alternative Name
Marotta, A. M.
Marotta, A.
ORCID
11 results
Filters
Settings
The search returned 11 results
Now showing 1 - 10 of 11
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , New Insights into Long-Term Aseismic Deformation and Regional Strain Rates from GNSS Data Inversion: The Case of the Pollino and Castrovillari Faults
We present a novel inverse method for discriminating regional deformation and long-term fault creep by inversion of GNSS velocities observed at the spatial scale of intraplate faults by exploiting the different spatial signatures of these two mechanisms. In doing so our method provides a refined estimate of the upper bound of the strain accumulation process. As case study, we apply this method to a six year GNSS campaign (2003–2008) set up in the southern portion of the Pollino Range over the Castrovillari and Pollino faults. We show that regional deformation alone cannot explain the observed deformation pattern and implies high geodetic strain rate, with a WSW-ENE extension of 86±41×10−9/yr. Allowing for the possibility of fault creep, the modelling of GNSS velocities is consistent with their uncertainties and they are mainly explained by a shallow creep over the Pollino fault, with a normal/strike-slip mechanism up to 5 mm/yr. The regional strain rate decrease by about 70 percent and is characterized by WNW-ESE extension of 24±28×10−9/yr. The large uncertainties affecting our estimate of regional strain rate do not allow infering whether the tectonic regime of the area is extensional or strike-slip, although the latter is slightly more likely208 39 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Global to Local Moho Estimate Based on GOCE Geopotential Model and Local Gravity Data
Collocation approach has been applied to get a global Moho model in spherical approximation based on a GOCE geopotential model. A simple single layer model, with known density contrast, has been considered and a linearized relationship between the spherical harmonic coefficients of the anomalous potential and those of the Moho depth has been derived. This allows the covariance propagation from gravity to Moho depth. The derived covariance functions are then used in the collocation estimate of the global Moho depth. In order to be as close as possible to the considered model, reductions for the gravity signal related to topography/bathymetry have been applied. Simulated and real data tests have been performed and the obtained global solution has been compared with Moho estimates available in literature. The obtained global Moho has been then used as a starting solution for a regional refinement assuming planar approximation. In this second step the computation has been performed in the Central Mediterranean area, based on collocation, local gravity and topography/bathymetry data.48 3 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Statistical assessment of predictive modelling uncertainty: a geophysical case study
When the results of geophysical models are compared with data, the uncertainties of the model are typically disregarded. This paper proposes a method for defining the uncertainty of a geophysical model based on a numerical procedure that estimates the empirical auto- and cross-covariances of model-estimated quantities. These empirical values are then fitted by proper covariance functions and used to compute the covariance matrix associated with the model predictions. The method is tested using a geophysical, spherical, thin-sheet finite element model of the Mediterranean region. Using a χ2 analysis, the model's estimated horizontal velocities are compared with the velocities estimated from permanent GPS stations while taking into account the model uncertainty through its covariance structure and the covariance of the GPS estimates. The results indicate that including the estimated model covariance in the testing procedure leads to lower observed χ2 values and might help a sharper identification of the best-fitting geophysical models.63 1 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , How lithospheric subduction changes along the Calabrian Arc in southern Italy: geophysical evidences
Recent tomographic investigations performed down to ~300 km depth in the Calabrian Arc region gave insight in favor of the hypothesis that the Ionian subducting slab is continuous in depth beneath the central part of the Arc, while detachment of the deep portion of the subducting structure may have already taken place beneath the edges of the Arc itself. In the present study, we perform new geophysical analyses to further explore the structure of the subduction system and the structure and kinematics of the crustal units in the study area for a more comprehensive view of the local geodynamic scenario. Local earthquake tomography that we address to the exploration of the upper 40 km in the whole region of southern Italy furnishes P-wave velocity domains, suggesting southeast-ward long-term drifting of the southern Tyrrhenian unit with an advancement front matching well with the segment of Calabrian Arc where the subducting slab was found continuous and trench retreat can be presumed to have been active in the most recent times. This scenario of retreating subduction trench inducing drifting of the lithospheric unit overriding the subducting slab is further supported by the analysis of gravity anomalies, allowing us to better constrain the transitional zones between different subduction modes (continuous vs. detached slab) along the Arc. Also, the relocation of recent crustal seismicity, associated with geostructural data taken from the literature, provides evidence for NW-trending seismogenic structures in northeastern Sicily and northern Calabria that we interpret as Subduction-Transform Edge Propagator (STEP) faults guiding the southeast-ward drifting process of the southern Tyrrhenian unit. Crustal earthquake relocations show also seismolineaments in southern Calabria corresponding to the NE-trending longitudinal structures of the Arc where the great shallow earthquakes of 28 December 1908, and 5 and 7 February 1783 occurred. Seismicity and the extensional stress regime detected in these structures find also reasonable location in the proposed scenario, being interpretable in terms of shallow response of the central segment of the Arc to slab rollback and trench retreat.73 3 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , The MU-RAY project: Volcano radiography with cosmic-ray muons
(2011-02-01); ; ; ; Cosmic-ray muon radiography is a technique for imaging the variation of density inside the top few 100m of a volcanic cone. With resolutions up to 10s of meters in optimal detection conditions, muon radiography can provide images of the top region of a volcano edifice with a resolution that is considerably better than that typically achieved with conventional methods. Such precise measurements are expected to provide us with information on anomalies in the rock density distribution, like those expected from dense lava conduits, low density magma supply paths or the compression with depth of the overlying soil. The MU-RAY project aims at the construction of muon telescopes and the development of new analysis tools for muon radiography. The telescopes are required to be able to work in harsh environment and to have low power consumption, good angular and time resolutions, large active area and modularity. The telescope consists of two X–Y planes of 2x2 square meters area made by plastic scintillator strips of triangular shape. Each strip is read by a fast WLS fiber coupled to a silicon photomultiplier. The readout electronics is based on the SPIROC chip.391 33 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , The SISMA prototype system: integrating Geophysical Modeling and Earth Observation for time-dependent seismic hazard assessment
(2011); ; ; ; An innovative approach to seismic hazard assessment is illustrated that, based on the available knowledge of the physical properties of the Earth structure and of seismic sources, on geodetic observations, as well as on the geophysical forward modeling, allows for a time-dependent definition of the seismic input. According to the proposed approach, a fully formalized system integrating Earth Observation data and new advanced methods in seismological and geophysical data analysis is currently under development in the framework of the Pilot Project SISMA, funded by the Italian Space Agency. The synergic use of geodetic Earth Observation data (EO) and Geophysical Forward Modeling deformation maps at the national scale complements the space- and time-dependent information provided by real-time monitoring of seismic flow (performed by means of the earthquake prediction algorithms CN and M8S) and permits the identification and routine updating of alerted areas. At the local spatial scale (tens of km) of the seismogenic nodes identified by pattern-recognition analysis, both GNSS (Global Navigation Satellite System) and SAR (Synthetic Aperture Radar) techniques, coupled with expressly developed models for interseismic phase, allow us to retrieve the deformation style and stress evolution within the seismogenic areas. The displacement fields obtained from EO data provide the input for the geophysical modeling, which eventually permits to indicate whether a specific fault is in a “critical state.” The scenarios of expected ground motion (shakemaps) associated with the alerted areas are then defined by means of full waveforms modeling, based on the possibility to compute synthetic seismograms by the modal summation technique (neo-deterministic hazard assessment). In this way, a set of deterministic scenarios of ground motion, which refer to the time interval when a strong event is likely to occur within the alerted area, can be defined both at national and at local scale. The considered integrated approach opens new routes in understanding the dynamics of fault zones as well as in modeling the expected ground motion. The SISMA system, in fact, provides tools for establishing warning criteria based on deterministic and rigorous forward geophysical models and hence allows for a well-controlled real-time prospective testing and validation of the proposed methodology over the Italian territory. The proposed approach complements the traditional probabilistic approach for seismic hazard estimates, since it supplies routinely updated information useful in assigning priorities for timely mitigation actions and hence it is particularly relevant to Civil Defense purposes.80 1 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , The MU-RAY project: Summary of the round-table discussions
(2010); ; ; ; The MU-RAY project has the challenging aim of performing muon radiography of the summit cone of Mt. Vesuvius. The muon telescopes developed for this purpose will be available for the radiography of other volcanoes, in particular Stromboli. The scientific goals, the strategy for their implementation and the baseline detector design are discussed in detail. A tentative time schedule for the project is drawn.305 35 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Block model versus thermomechanical model: new insights on the present-day regional deformation in the surroundings of the Calabrian Arc
(Geological society of London SP 332, 2010); ; ;Barzaghi, Riccardo; A finite-element thermomechanical model is used to analyse present-day crustal deformation in the surroundings of the Calabrian Arc. The major structural complexities of the Tyrrhenian area are taken into account, along with the rheological properties of the rocks resulting from a thermal analysis. A comparison between the results obtained from a model com- posed of three wide rheologically uniform blocks and those obtained from the thermomechanical model allows us to better constrain the geophysical assumptions and shed light on the roles of the different active mechanisms acting in the Tyrrhenian. Our comparative analysis enlightens the crucial role played by lateral rheological heterogeneities when deformation is analysed at short wavelengths of a few hundred kilometres of the Tyrrhenian, driving the observed diffuse SW–NE extension within the regional context of active Africa–Eurasia convergence. Furthermore, a x 2 analysis based on comparisons with GPS data confirms the hypothesis that a significant part of the Africa– Eurasia convergence is absorbed through the Calabrian subduction.44 136 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Perspectives for the radiography of Mt. Vesuvius by cosmic ray muons
(2010); ; ; ; The measurements performed in Japan have shown that muon radiography is an “imaging technique” capable of providing information of the internal structure of volcanoes with a resolution and richness of details beyond the reach of conventional, non-imaging techniques. The measurements have been performed using electronic detectors or nuclear emulsions. The latter have shown excellent muon tracking capabilities and space resolution, but are lacking of the capability of electronic detectors to provide data in real time. In this paper, we examine the possibility of developing an electronic detector giving a resolution comparable to that of nuclear emulsions and with a larger area than used so far, in order to see deeper structures inside volcanoes in spite of the strong muon absorption in the rock. We specifically discuss the very challenging application of muon radiography to Mt. Vesuvius, driven by the strong social interest coming from the enormous potential danger which it represents. Applications to other volcanoes can be envisaged.234 28 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , First evidences of fast creeping on a long-lasting quiescent earthquake normal-fault in the Mediterranean
A key issue in our understanding of the earthquake cycle and seismic hazard is the behaviour of an active fault during the interseismic phase. Locked and creeping faults represent two end-members of mechanical behaviours that are given two extreme rupturing hazard levels, that is, high and low, respectively. Geophysical and space geodetic analyses are carried out over the Pollino Range, an extensional environment within the Africa–Eurasia plate boundary, to disclose the behaviour of the long-lasting quiescent Castrovillari normal fault. Fault trenching evidenced at least four large earthquakes (6.5–7.0 M w ) in the past and an elapsed time of 1200 yr since the last event. Inversion of Differential Interferometric Synthetic Aperture Radar and Global Positioning System over a decade shows fast creeping at all depths of the fault plane. The velocity-strengthening creeping zone reaches maximum rates 20 mm yr −1 against an average rate of about 3–9 mm yr −1 . It limits the southern-weakening locked part of the fault. An essential condition for the generation of a large earthquake on the Castrovillari fault, as has occurred in the past, is a rupture through the velocity-strengthening zone. The Castrovillari fault yields the best evidence for being both a strong and weak fault during its earthquake cycle. Creeping at rates faster than its tectonically driven ones, it must thus consist of a mix of unstable and conditionally stable patches ready to sustain a sizeable earthquake. Quantifying and mapping the slip rate over the fault plane is important because they influence fault moment budget estimate and helps to constrain constitutive laws of fault zones. Aseismic slip also redistributes stress in the crust, thereby affecting the locations of future earthquakes.156 66
