Skip to main content
The search returned 6 results
Now showing 1 - 6 of 6
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    3D Digital Outcrop Model analysis of fracture networks: insights from the Mt. Vettore Fault Zone.

    In the last years, several studies investigated the Mt. Vettore Fault Zone (MVFZ), activated during the 2016 Central Italy seismic sequence. Research has focused mainly on aftershocks and mainshock locations, coseismic slip and surface cracks, while an accurate study of the fracture network in the MVFZ was never conducted. In this study we present a fracture analysis performed using very high resolution (0.5 – 5 cm) Digital Outcrop Models (DOMs) that developed by Unmanned Aerial Vehicle (UAV)-based digital photogrammetry. The UAV gave the possibility to investigate outcrops with dimensions up to hundreds of metres high and wide, and acquire big and precise fracture data using 3D digital automatic and manual mapping techniques. To investigate the structural variability of the MVFZ fracture network, we realized several DOMs located in different positions, along and around the major fault. All the selected outcrops are formed by Calcare Massiccio Fm., which better records brittle deformation in the study area. This analysis aimed to better understand the MVFZ fracture network, including mechanics, kinematics and local structural evolution. In particular, it allowed to determine: 1) the main sets of fractures; 2) the geometrical parameters of the fracture network (e.g. fracture density, persistence, roughness and aperture); 3) the relative timing of the main tectonic brittle events. The preliminary analysis of the DOMs suggests a variability of the fracture network parameters over the MVFZ, especially for what concerned fracture set orientation and density.
      41  94
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    QUIN 2.0 - new release of the QUaternary fault strain INdicators database from the Southern Apennines of Italy

    QUIN database integrates and organizes structural-geological information from published and unpublished sources to constrain deformation in seismotectonic studies. The initial release, QUIN1.0, comprised 3,339 Fault Striation Pairs, mapped on 445 sites exposed along the Quaternary faults of central Italy. The present Data Descriptor introduces the QUIN 2.0 release, which includes 4,297 Fault Striation Pairs on 738 Structural Sites from southern Italy. The newly investigated faults span ~500 km along the Apennines chain, with strikes transitioning from ~SE to ~SW and comprehensively details Fault Striation Pairs' location, attitude, kinematics, and deformation axes. Additionally, it offers a shapefile of the fault traces hosting the data. The QUIN 2.0 release offers a significant geographic extension to the QUIN 1.0, with comprehensive description of local geometric-kinematic complexities of the regional pattern. The QUIN data may be especially relevant for constraining intra-Apennine potential seismogenic deformation patterns, where earthquake data only offer scattered or incomplete information. QUIN's data will support studies aimed at enhancing geological understanding, hazard assessment and comprehension of fault rupture propagation and barriers.
      42  126
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    QUIN 2.0 - new release of the QUaternary fault strain INdicators database from the Southern Apennines of Italy

    QUIN database integrates and organizes structural-geological information from published and unpublished sources to constrain deformation in seismotectonic studies. The initial release, QUIN1.0, comprised 3,339 Fault Striation Pairs, mapped on 445 sites exposed along the Quaternary faults of central Italy. The present Data Descriptor introduces the QUIN 2.0 release, which includes 4,297 Fault Striation Pairs on 738 Structural Sites from southern Italy. The newly investigated faults span ~500 km along the Apennines chain, with strikes transitioning from ~SE to ~SW and comprehensively details Fault Striation Pairs' location, attitude, kinematics, and deformation axes. Additionally, it offers a shapefile of the fault traces hosting the data. The QUIN 2.0 release offers a significant geographic extension to the QUIN 1.0, with comprehensive description of local geometric-kinematic complexities of the regional pattern. The QUIN data may be especially relevant for constraining intra-Apennine potential seismogenic deformation patterns, where earthquake data only offer scattered or incomplete information. QUIN's data will support studies aimed at enhancing geological understanding, hazard assessment and comprehension of fault rupture propagation and barriers.
      6  63
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Seismic Reflection Profiles and Subsurface Geology of the Area Interested by the 2016-2017 Earthquake Sequence (Central Italy)

    Starting from 24 August 2016, a long seismic sequence, including nine Mw > 5.0 earthquakes, struck a wide area of the Central Italy. A large amount of geological, geodetic, and seismological data envisages a complex system of NNW-SSE trending, seismogenic normal faults. These active tectonic structures are well known at the surface and consistent with previous seismotectonic studies. In order to improve the comprehension of the seismotectonic framework of this seismic sequence, we provide a novel reconstruction of the subsurface geology of the area close to the NorciaMw 6.5 mainshock (30 October 2016), based on previously unpublished seismic reflection profiles and available geological data. All the data have been synthesized along a 47 km long, WSW-ENE trending geological cross section, interpreted down to a depth of 12 km. Comparing the subsurface geological model with the available seismological data, we find that the majority of seismicity is confined within the sedimentary sequence and does not penetrate the underlying basement. The basement has been constrained at depths of 8 to 11 km and coincides with the cutoff of the seismicity. We have also traced the trajectories of the seismogenic normal faults activated during this seismic sequence, reconciling the high-angle (dip>65°) normal faults exposed at the surface, with their angle (dip < 50°) at hypocentral depths. The results of this study may be useful for better understanding the rheological properties of the seismogenic rock volume, as well as the coseismic deformations of the topographic surface observed by geodetic techniques and field mapping.
      107  123
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Gravity modelling of the Tyrrhenian-Calabrian-Ionian subduction system

    This study provides a lithospheric-scale model along the Ionian Subduction zone in Southern Italy, contributing to the seismotectonic investigation of a region which is affected by relevant historical seismicity. The study employs gravity forward modelling to build the geo-structural model along a composite, NWSE trending transect extending from the Ionian to the Tyrrhenian Sea, including the Aeolian arc and the Calabro-Peloritan onshore. Through a multidisciplinary approach, we propose new interpretations of three 2D deep-seismic reflection profiles across the study area. Such interpretative profiles are used as constraints to model the observed Bouguer gravity anomalies providing upper and lower crust geometries. Whilst a tomographic model provides constraints for the lithospheric and asthenospheric modelling. The entire workflow is constrained by literature data about Moho geometry, deep seismicity and tomographic images that are integrated to determine the subducting slab geometry. The proposed model of the entire subducting system reasonably fits the observed gravity field and is coherent with the first-order geological and geophysical constraints. The modelling results in updated Tyrrhenian and Ionian Moho depth, subducting slab geometry and location, and densities of the main units, providing valuable input about the composition and geometry of the Calabrian arc structures.
      47  146
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The influence of subsurface geology on the distribution of earthquakes during the 2016‐–2017 Central Italy seismic sequence

    In 2016–2017, a destructive sequence of earthquakes affected a wide portion of Central Italy, activating a complex, 80-km long system of SW-dipping normal faults and causing impressive surface faulting and widespread damage. Former studies providing reconstructions of the fault systems activated during this sequence, are mostly based on high-resolution seismological and geodetic data. In this paper, we integrate surface and subsurface geological data with the ones obtained by an irregular network of seismic reflection profiles, aimed at providing a comprehensive reconstruction of the subsurface lithologies and structures in this area. We have constructed a set of five geological cross-sections, passing through the mainshock epicentral areas (Mw > 5.5) of the seismic sequence. The cross-sections are extrapolated down to a depth of ca. 12 km, along which we have plotted relocated seismicity. Combined geological and seismological data support a new 3D seismotectonic model, illustrating the propagation through time and space of the seismic ruptures during the sequence. Our results show that the litho-mechanical stratigraphy exerted a primary control on the distribution of seismicity, as it is mostly hosted in the more competent lithologies (i.e. the Late Triassic-Paleogene succession, consisting of carbonates and evaporites). In addition, we illustrate the crucial role played by the inherited compressional structures in determining the lateral and vertical variations of the rheological properties of the upper crust and, eventually, the overall geometry and segmentation of the seismogenic extensional system. The workflow proposed here can be applied to other seismogenic zones throughout the world, since reliable seismotectonic models require an accurate reconstruction of the subsurface geological setting, based on a close integration of geological, geophysical and seismological data.
      162  149