Ojeda, Javier
The search returned 2 results
Now showing 1 - 2 of 2
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Hybrid broadband strong-motion simulation to investigate the near-source characteristics of the M6.5, 30 October 2016 Norcia, Italy earthquake
(2021-06-13); ; ; ; During the 2016–2017 Central Italy earthquake sequence, a series of moderate to large earthquakes M > 5 occurred near the Amatrice and Norcia towns. These events are recorded on a dense seismic network, providing relevant observational evidence of complex earthquakes in time and space. In this work, we used this substantial data set to study the ground-motion characteristics of the Norcia earthquake M6.5 on October 30, 2016, through a broadband ground-motion simulation. Three-component broadband seismograms are generated to cover the entire frequency band of engineering interest. Low and high frequencies are computed considering the heterogeneous slip rupture model of Scognamiglio et al. (2018) [1]. High frequencies are calculated using a stochastic approach including P, SV, and SH waves, while low frequencies are obtained through a forward simulation of the kinematic model at the various stations. To predict earthquake-induced ground motions in the area, we adopted region-specific attenuation and source scaling parameters derived by Malagnini et al. (2011) [2]. Ground-motion parameters, including peak ground acceleration (PGA), peak ground velocity (PGV) and spectral amplitudes, are calculated at the selected sites adopting physics-based parameters to understand better the earthquake fault rupture, the wave propagation, and their impacts on the seismic hazard assessment in the region. We showed that combining the fault rupture history over the entire frequency spectrum of engineering interest, the attenuation characteristics of the seismic wave propagation, and the properly defined site responses can improve the prediction of ground motions and time histories, especially in near seismic sources.343 348 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Global quieting of high-frequency seismic noise due to COVID-19 pandemic lockdown measures
Human activity causes vibrations that propagate into the ground as high-frequency seismic waves. Measures to mitigate the coronavirus disease 2019 (COVID-19) pandemic caused widespread changes in human activity, leading to a months-long reduction in seismic noise of up to 50%. The 2020 seismic noise quiet period is the longest and most prominent global anthropogenic seismic noise reduction on record. Although the reduction is strongest at surface seismometers in populated areas, this seismic quiescence extends for many kilometers radially and hundreds of meters in depth. This quiet period provides an opportunity to detect subtle signals from subsurface seismic sources that would have been concealed in noisier times and to benchmark sources of anthropogenic noise. A strong correlation between seismic noise and independent measurements of human mobility suggests that seismology provides an absolute, real-time estimate of human activities.296 116
