De Matteis, Raffaella
Preferred name
De Matteis, Raffaella
ORCID
25 results
Filters
Settings
The search returned 25 results
Now showing 1 - 10 of 25
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , BISTROP: Bayesian Inversion of Spectral‐Level Ratios andP‐Wave Polarities for Focal Mechanism Determination
The analysis of earthquake focal mechanisms provides information about the stress regime, fault geometry, and deformation processes acting in a given region. Generally, the techniques aimed at determining focal mechanism are designed to work in a specific magnitude range operating both in the time and frequency domain and using different data (e.g., P polarities, S-wave polarization, S/P-amplitude ratios, etc.). In this article, we present a new method, Bayesian inversion of spectral-level ratios and P-wave polarities (BISTROP), that can be applied to both small and moderate-to-large magnitude events. BISTROP uses a Bayesian approach to jointly invert the long-period spectral- level P/S ratios and the P polarities to infer the fault-plane solutions. We apply this method to analyze synthetic data as well as those generated by real earthquakes. We find that the obtained solutions for moderate earthquakes are comparable with those obtained using moment tensor inversion, and they are more constrained with respect to the solutions obtained using only P-polarity data for small earthquakes.80 314 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , 145 139 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , A Strong Motion Attenuation Relation for Earlywarning Application in the Campania Region (Southern Apennines)
(2007); ; ; ; For early-warning applications in particular, the reliability and efficiency of rapid scenario generation strongly depend on the availability of reliable strong ground-motion prediction tools. If shake maps are used to represent patterns of potential damage as a consequence of large earthquakes, attenuation relations are used as a tool for predicting peak ground-motion parameters and intensities. One of the limitations in the use of attenuation relations is that these have only rarely been retrieved from data collected in the same tectonic environment in which the prediction has to be performed. As a consequence, strong ground motion can result in underestimations or overestimations with respect to the recorded data. This also holds for Italy, and in particular for the Southern Apennines, due to limitations in the available databases, both in terms of distances and magnitude. Moreover, for “real-time” early-warning applications, it is important to have attenuation models for which the parameters can be easily upgraded when new data are collected, whether this has to be done during the earthquake rupture occurrence or in the post-event, when all the strong motion waveforms are available. Here we present a strong-motion attenuation relation for early-warning applications in the Campania region (Southern Apennines), Italy. The model has a classical analytical formulation, and its coefficients were retrieved from a synthetic strong-motion database created by using a stochastic approach. The input parameters for the simulation technique were obtained through the spectral analysis of waveforms of earthquakes recorded by the Istituto Nazionale di Geofisica e Vulcanologia (INGV) network for a magnitude range Md (1.5,5.0) in the last fifteen years, and they have been extrapolated to cover a larger range. To validate the inferred relation, comparisons with two existing attenuation relations are presented. The results show that the calibration of the attenuation parameters, i.e., geometric spreading, quality factor Q, static stress drop values along with their uncertainties, are the main concern.136 23 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Pore Fluid Pressure Imaging of the Mt. Pollino Region (Southern Italy) From Earthquake Focal Mechanisms
Focal mechanisms of selected earthquakes, recorded in the Mount Pollino region (southern Italy) from 2010 through 2014, are used to infer the pore fluid pressure at hypocenter depths. The 3-D excess pore pressure field provides evidence that the sequence occurs in a fluid-filled volume with values reaching 35 MPa. The mechanisms underlying this swarm-like sequence and the triggering of earthquakes are investigated by computing the cumulative static Coulomb stress change at hypocenter depths and analyzing the pore-pressure diffusion mechanism. The results indicate that static Coulomb stress change was lower than 0.01 MPa, which is the value generally assumed as threshold for the triggering, and seismicity distribution was actually driven by pore-pressure diffusion with relatively low diffusivity value. This latter mechanism could also explain the delayed triggering of the two larger events ML 4.3 and ML 5.0, respectively, that occurred about 150 days apart.111 104 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Fluid-Triggered Aftershocks in an Anisotropic Hydraulic Conductivity Geological Complex: The Case of the 2016 Amatrice Sequence, Italy
The mechanism by which faults interact each other is still a debated matter. One of the main issues is the role of pore-pressure diffusion in the delayed triggering of successive events. The 2016 Amatrice–Visso–Norcia seismic sequence (Central Apennines, Italy) provides a suitable dataset to test different physical mechanisms leading to delayed events. The sequence started on August 24, 2016, with the Amatrice mainshock (MW = 6), and was followed after more than 60 days by events in Visso (MW = 5.4) and Norcia (MW = 5.9). We analyzed the contribution of the static stress change and the role of fluids in the delayed triggering. Through 3D poroelastic modeling, we show that the Amatrice mainshock induced a pore-pressure diffusion and a normal stress reduction in the hypocentral area of the two aftershocks, favoring the rupture. Our parametric study employs a simple two-layered conductivity model with anisotropy in the seismogenic layer, characterized by larger conductivity values (K > 105 m/s) along the NNW-SSE direction. The one-way coupled pore-pressure 3-D diffusion modeling predicts the maximum increase of the pore pressure at the location of the two Visso earthquakes 60 days after the mainshock. The occurrence of anisotropic diffusivity is supported by the pattern of active faults and the strong crustal anisotropy documented by S-wave splitting analysis. We conclude that the temporal evolution of the sequence was controlled by the anisotropic diffusion of pore-pressure perturbations through pre-existing NNW-trending fracture systems.484 92 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , 3D tomographic imaging of the southern Apennines (Italy): A statistical approach to estimate the model uncertainty and resolution
(2010); ; ; ; A new dataset of first P-wave arrival times is used to derive the 3D tomographic model of the Campania-Lucania region in the southern Apennines (Italy). We address the issue related to the non-uniqueness of the tomographic inversion solution through massive numerical experimentation based on the global exploration of the model parameter space starting from a large variety of physically plausible initial models. The average of all the realizations is adopted as the best-fit solution and the uncertainty of the model parameters is studied using a statistical approach based on a Monte Carlo-type analysis. How the uncertainty in the initial model, earthquake locations, and data influences the inversion result is studied by considering separately the individual effects. Checkerboard tests are performed to estimate the resolving power of the dataset. Re-located seismicity in a reliable new 3D tomographic model allows us to correlate the earthquake distribution with the main seismogenic structures present in the area.188 29 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Seismic imaging of fluid-filled inherited structures of the Northern Thessaly (Greece) seismic gap
e present the first seismic imaging of the crustal volume affected by the March April 2021 Thessaly sequence by applying a 3D seismic tomography to the aftershocks recorded by an unprecedented number of stations. The results, in terms of VP, VS, and VP/VS ratio and earthquakes’ location parameters, depict blind fluid-filled inherited structures within the Northern Thessaly seismic gap. The tomographic images highlight the basal detachment accommodating the Pelagonian nappe onto the carbonate of the Gavrovo unit. The high VP/VS (>1.85) where most of the seismicity occurs increases from SE to NW, showing possible fluid accumulation in the NW edge of the seismogenic volume that could have contributed to the sequence evolution. The aftershock relocations correlate well with the fault planes of the three mainshocks proposed by several geodetic models, but also show additional possible faults sub-parallel and antithetical to the main structures, not to be overlooked for future seismic risk mitigation38 116 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , 2D seismic tomography of Somma- Vesuvius. Description of the experiment and preliminary results.
(1996-05); ; ; ; A multidisciplinary project for the investigation of Mt. Vesuvius Structure was started in 1993. The core of the project is represented by a high resolution seismic tomography study by using controlled and natura1 sources. The main research objective is to investigate the feeding system of the vo1cano and to retrieve details of the upper crustal structure in the area. A first 2D using seismic experiment was performed in May 1994, with the aim of studing the feasibility of lIsing tomographic techniques for exploring the vo1cano interiors. Particularly, this experiment was designed to obtain information on the optimal sources-receivers configuration and on the depth extension of the volume sampled by shot-generated seismic waves. 66 three-component seismic stations and 16 single-component analogue instruments were installed by several Italian and French groups to record signals generated by three on-land, underground explosions. Sources and geophones were deployed along a 30-km NW-SE profile passing through the volcano crater. Receivers were placed at an average spacing of 250 m in the middle of the recording line and at 500 m outside. The arrival time data base was complemented by first P and S readings of micro earthquakes which occurred in the recent past within the volcano. The first arrival data set was preliminary used to determine the shallow structure of the volcano by applying Thurber's (1983) tomographic inversion technique. This analysis shows evidence for a high-velocity body which extends vertically from about 400 m below the crater down to at least 3000 m and for a shallow 300-500 m thick low-velocity cover which borders the edifice. Data from the distant shot show evidence for arrivals of deep reflected/converted phases and provide information on the deeper structure under the volcano. The results from the interpretation of 2D data are used for planning a 3D tomographic survey which will be cauied out in 1996.341 710 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Evidence for Static and Dynamic Triggering of Seismicity Following the 24 August 2016, M W = 6.0, Amatrice (Central Italy) Earthquake
The recent 24 August 2016, MW=6.0, Amatrice earthquake (central Italy) and the resulting aftershock sequence represents a test case to investigate the static and dynamic stress/strain contribution to the triggering of the sequence. Here we test the hypothesis that either static or dynamic stress contribution alone may not be sufficient to explain the aftershock distribution. We first inferred the horizontal source rupture directivity together with an estimate of the surface fault projection from the analysis of the peak-ground velocity. We computed the peak-dynamic strain field, modified by source directivity, using the peak-ground velocity as a strain proxy and the Coulomb static stress change. Finally, we compared the seismicity rate map ( b-statistic) with each of the estimated fields to investigate correlations with the aftershock pattern. We found that the area of the highest values of the estimated peak-dynamic strain field better reproduces the observed asymmetry in the aftershock distribution. This suggests that, in addition to Coulomb static stress change, dynamic strain enhanced by source directivity, contributed to the triggering of the Amatrice earthquake aftershocks.227 2 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Development of a multi-phase dynamic ray-tracing code
(2007); ; ; ;Stabile, T. A.; Dipartimento di Scienze Fisiche, Università degli Studi di Napoli Federico II (RISSC-Lab), Napoli, ItalyDe Matteis, R.; Dipartimento di Studi Geologici ed Ambientali, Università degli Studi del Sannio, Benevento, ItalyWe here propose a method for rapid, high-frequency seismogram generation that makes use of an algorithm to automatically generate an exhau- stive set of seismic phases that produce an appreciable amplitude on the sei- smogram. The method uses a hierarchical order of rays and seismic phases generation, taking into account some existence constraints for a ray-path and some physical constraints. To compute synthetic seismograms, the COMRAD code (from the Italian: “COdice Multifase per il RAy-tracing Dinamico”) uses as its core a dynamic ray-tracing code. To validate the code, we have computed in a layered medium synthetic seismograms using both COMRAD and a code which computes the complete wavefield by the discrete wavenumber method. The seismograms are compared according to a time-frequency misfit criteria based on the continuous wavelet transform of the signals. The comparison shows that the ray-theory seismogram is enough complete and moreover, the time for the computing of the synthetics using the COMRAD code (truncating the ray series at the 10th generation) is 3-4-fold less than that needed for the Axitra code (to a frequency of 25 Hz).211 390
